Support SDCard simulate eeprom to store data

firmware/Marlin-SKR-Pro/Marlin/src/HAL/HAL_STM32/persistent_store_impl.cpp

@@ -24,7 +24,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(EEPROM_SETTINGS)
+#if ENABLED(EEPROM_SETTINGS) && EITHER(FLASH_EEPROM_EMULATION,SRAM_EEPROM_EMULATION)
 
 #include "../shared/persistent_store_api.h"
 

firmware/Marlin-SKR-Pro/Marlin/src/HAL/HAL_STM32/persistent_store_sdcard.cpp

@@ -0,0 +1,103 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * HAL for stm32duino.com based on Libmaple and compatible (STM32F1)
+ */
+
+#ifdef TARGET_STM32F4
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(EEPROM_SETTINGS) && NONE(FLASH_EEPROM_EMULATION, SPI_EEPROM, I2C_EEPROM)
+
+#include "../shared/persistent_store_api.h"
+
+#ifndef E2END
+  #define E2END 0xFFF // 4KB
+#endif
+#define HAL_STM32F4_EEPROM_SIZE (E2END + 1)     //16K  size
+
+static char HAL_STM32F1_eeprom_content[HAL_STM32F4_EEPROM_SIZE];
+
+#if ENABLED(SDSUPPORT)
+
+  #include "../../sd/cardreader.h"
+
+  #define EEPROM_FILENAME "eeprom.dat"
+
+  bool PersistentStore::access_start() {
+    if (!card.isDetected()) return false;
+
+    SdFile file, root = card.getroot();
+    if (!file.open(&root, EEPROM_FILENAME, O_RDONLY))
+      return false;
+
+    int16_t bytes_read = file.read(HAL_STM32F1_eeprom_content, HAL_STM32F4_EEPROM_SIZE);
+    if (bytes_read < 0) return false;
+    for (; bytes_read < HAL_STM32F4_EEPROM_SIZE; bytes_read++)
+      HAL_STM32F1_eeprom_content[bytes_read] = 0xFF;
+    file.close();
+    return true;
+  }
+
+  bool PersistentStore::access_finish() {
+    if (!card.isDetected()) return false;
+
+    SdFile file, root = card.getroot();
+    int16_t bytes_written = 0;
+    if (file.open(&root, EEPROM_FILENAME, O_CREAT | O_WRITE | O_TRUNC)) {
+      bytes_written = file.write(HAL_STM32F1_eeprom_content, HAL_STM32F4_EEPROM_SIZE);
+      file.close();
+    }
+    return (bytes_written == HAL_STM32F4_EEPROM_SIZE);
+  }
+
+#else // !SDSUPPORT
+
+  #error "Please define SPI_EEPROM (in Configuration.h) or disable EEPROM_SETTINGS."
+
+#endif // !SDSUPPORT
+
+bool PersistentStore::write_data(int &pos, const uint8_t *value, const size_t size, uint16_t *crc) {
+  for (size_t i = 0; i < size; i++)
+    HAL_STM32F1_eeprom_content[pos + i] = value[i];
+  crc16(crc, value, size);
+  pos += size;
+  return false;
+}
+
+bool PersistentStore::read_data(int &pos, uint8_t* value, const size_t size, uint16_t *crc, const bool writing/*=true*/) {
+  for (size_t i = 0; i < size; i++) {
+    uint8_t c = HAL_STM32F1_eeprom_content[pos + i];
+    if (writing) value[i] = c;
+    crc16(crc, &c, 1);
+  }
+  pos += size;
+  return false;
+}
+
+size_t PersistentStore::capacity() { return HAL_STM32F4_EEPROM_SIZE; }
+
+#endif // EEPROM_SETTINGS
+
+#endif // __STM32F1__

firmware/Marlin-SKR-Pro/Marlin/src/pins/pins_BIGTREE_SKR_PRO_V1.1.h

@@ -31,7 +31,8 @@
 
 #define BOARD_NAME "BIGTREE SKR Pro V1.1"
 
-#define EEPROM_EMULATED_WITH_SRAM
+//#define SRAM_EEPROM_EMULATION
+//#define FLASH_EEPROM_EMULATION                  //Use Flash Emulation Eeprom Store Data Otherwise Use SDCard Emulation EEprom Store Data
 
 //
 // Servos