Curriculum learning support

examples/curriculum_learning/README.md

@@ -0,0 +1,26 @@
+This is a short tutorial of how to use/tune the curriculum learning (CL) integration. Currently it is only integrated for GPT pre-training. For technical details please refer to our [paper](https://arxiv.org/abs/2108.06084).
+
+# Disable batch size warmup (--rampup-batch-size)
+In our [paper](https://arxiv.org/abs/2108.06084) section 5.4 we demonstrate that curriculum learning (seqlen-based) provides much better training stability than the batch size warmup technique. So when using CL you need to remove the `--rampup-batch-size` config in your training script. It's not recommended to use both CL and batch size warmup, because both of them will reduce the number of tokens in a batch. Another related change you might want is to increase your micro batch size, since without batch size warmup your batch size will be fixed now.
+
+# Token-based training termination
+
+Because CL changes length of each sequence/sample during training, it is very hard/impossible to use number of steps/samples to terminate the training exactly at the desired number of tokens. Thus we add a `--train-tokens` config as an alternative accurate token-based termination. We recommend increase your original `--train-samples` or `--train-iters` to a large enough number (e.g., 2X of what you used for baseline), and set `--train-tokens` at the exact desired number of training tokens (e.g., 300B for GPT-3 like training).
+
+# Token-based LR decay
+
+Again because CL changes the number of tokens per batch, in our [paper](https://arxiv.org/abs/2108.06084) Appendix A.2 we show that it is also necessary to change the LR decay to token-based (to avoid decaying LR too fast). Thus we add a `--lr-decay-tokens` which will be the number of LR decay tokens. If previously you were using `--lr-decay-samples`, you can calculate your `--lr-decay-tokens` simply by multiplying the former by full seqlen (e.g. 2K for GPT-3). Then you need to replace `--lr-decay-samples` with `--lr-decay-tokens` in your script. For LR warmup we don't change it to token-based, because doing so for CL means slowing down the LR warmup, which is both unnecessary and harmful.
+
+# Token-based tensorboard
+
+Because of the above changes, we also add token-based tensorboard scalars. We also add scalars that plot the seqlen at each step.
+
+# Curriculum learning hyperparameters tuning strategy
+
+The curriculum learning hyperparameters are all located in the deepspeed config json file (see the example `ds_config_cl.json` in this dir). There are three config entries that you need to change, and two of which require some tuning. In our [paper](https://arxiv.org/abs/2108.06084) Appendix A.1 we have a more detailed tuning strategy description.
+
+First, the `max_difficulty` should be set as the full seqlen (i.e., your `--seq-length`). No need to tune this.
+
+Second, the `min_difficulty` is the beginning seqlen used by CL. In general smaller `min_difficulty` could provide better stability/convergence speed benefit. However we observe that for a larger model or for different training data, starting from a very small seqlen could lead to significant validation PPL fluctuation (or even divergence) at the very beginning. We recommend to start with `min_difficulty` at 64, and then increase it if you observe problems at the very beginning. Note that to enable Tensor Core acceleration you should always use a multiple of 8.
+
+Third, the `total_curriculum_step` is the total number of steps used by CL. In general larger `total_curriculum_step` could provide better stability/convergence speed benefit. However we observe that a too large `total_curriculum_step` could lead to overfitting and significant validation PPL fluctuation (or even divergence) at the first few multiple of LR warmup steps. In our paper we have a detailed tuning strategy based on binary search. However, if you want to reduce the tuning effort we recommend directly setting `total_curriculum_step` as half of baseline's total number of steps. This may not provide the highest convergence speed benefit, but should provide enough training stability gains.

examples/curriculum_learning/ds_config_cl.json

@@ -0,0 +1,37 @@
+{
+  "train_batch_size": 512,
+  "gradient_accumulation_steps": 1,
+  "steps_per_print": 1,
+  "zero_optimization": {
+    "stage": 0
+  },
+  "optimizer": {
+    "type": "Adam",
+    "params": {
+      "lr": 0.00015,
+      "max_grad_norm": 1.0,
+      "betas": [0.9, 0.95]
+    }
+  },
+  "gradient_clipping": 1.0,
+  "fp16": {
+    "enabled": true,
+    "loss_scale": 0,
+    "loss_scale_window": 1000,
+    "hysteresis": 2,
+    "min_loss_scale": 1
+  },
+  "wall_clock_breakdown": false,
+  "zero_allow_untested_optimizer": false,
+  "curriculum_learning": {
+    "enabled": true,
+    "curriculum_type": "seqlen",
+    "min_difficulty": 8,
+    "max_difficulty": 1024,
+    "schedule_type": "fixed_linear",
+    "schedule_config": {
+      "total_curriculum_step": 60000,
+      "difficulty_step": 8
+    }
+  }
+}

examples/curriculum_learning/pretrain_gpt_cl.sh

@@ -0,0 +1,103 @@
+#!/bin/bash
+
+# This is a dummy train script to show how to use curriculum
+# learning, some parameters are not for actual GPT pretraining.
+
+TARGET_GLOBAL_BATCH_SIZE=512
+TRAIN_SAMPLES=146_484_375
+LR=1.0e-4
+MIN_LR=1.0e-5
+LR_DECAY_SAMPLES=126_953_125
+LR_WARMUP_SAMPLES=183_105
+SEQLEN=1024
+
+############################################################
+# New configs for curriculum learning, see README.md
+TRAIN_TOKENS=10_000_000_000
+LR_DECAY_TOKENS=$(($LR_DECAY_SAMPLES*$SEQLEN))
+############################################################
+
+LOG_INTERVAL=100
+EVAL_ITERS=10
+EVAL_INTERVAL=100
+SAVE_INTERVAL=1000
+
+VOCAB_PATH=/data/Megatron-LM/data/gpt2-vocab.json
+MERGE_PATH=/data/Megatron-LM/data/gpt2-merges.txt
+DATA_PATH=/data/Megatron-LM/data/indexed_datasets/megatron
+
+MICRO_BATCH_SIZE=1
+MP_SIZE=1
+PP_SIZE=1
+
+NUM_GPUS=128
+echo ${NUM_GPUS}
+if [[ $PP_SIZE -gt 0 ]]; then
+    DP_SIZE=$(( ${NUM_GPUS} / (${PP_SIZE} * ${MP_SIZE}) ))
+else
+    DP_SIZE=$(( ${NUM_GPUS} / ${MP_SIZE} ))
+fi
+GRAD_ACC_STEPS=$(( ${TARGET_GLOBAL_BATCH_SIZE} / (${MICRO_BATCH_SIZE} * ${DP_SIZE}) ))
+
+NAME="gpt-117M-pp${PP_SIZE}-mp${MP_SIZE}-bsz${TARGET_GLOBAL_BATCH_SIZE}-mbsz${MICRO_BATCH_SIZE}-cl"
+current_time=$(date "+%Y.%m.%d-%H.%M.%S")
+host="${HOSTNAME}"
+TENSORBOARD_DIR="tensorboard/${NAME}_${host}_${current_time}"
+mkdir -p ${TENSORBOARD_DIR}
+CHECKPOINT_PATH="checkpoints/${NAME}"
+
+megatron_options=" \
+        --data-path ${DATA_PATH} \
+        --vocab-file ${VOCAB_PATH} \
+        --merge-file ${MERGE_PATH} \
+        --data-impl mmap \
+        --override-lr-scheduler \
+        --adam-beta1 0.9 \
+        --adam-beta2 0.95 \
+        --tensor-model-parallel-size ${MP_SIZE} \
+        --init-method-std 0.014 \
+        --lr-decay-tokens ${LR_DECAY_TOKENS} \
+        --lr-warmup-samples ${LR_WARMUP_SAMPLES} \
+        --micro-batch-size ${MICRO_BATCH_SIZE} \
+        --global-batch-size ${TARGET_GLOBAL_BATCH_SIZE} \
+        --num-layers 12 \
+        --hidden-size 768 \
+        --num-attention-heads 16 \
+        --seq-length ${SEQLEN} \
+        --max-position-embeddings ${SEQLEN} \
+        --train-samples ${TRAIN_SAMPLES} \
+        --train-tokens ${TRAIN_TOKENS} \
+        --lr ${LR} \
+        --min-lr ${MIN_LR} \
+        --lr-decay-style cosine \
+        --split 98,2,0 \
+        --log-interval ${LOG_INTERVAL} \
+        --eval-interval ${EVAL_INTERVAL} \
+        --eval-iters ${EVAL_ITERS} \
+        --save-interval ${SAVE_INTERVAL} \
+        --weight-decay 0.1 \
+        --clip-grad 1.0 \
+        --hysteresis 2 \
+        --num-workers 0 \
+        --checkpoint-activations \
+        --fp16 \
+        --load ${CHECKPOINT_PATH} \
+        --save ${CHECKPOINT_PATH} \
+        --tensorboard-queue-size 1 \
+        --log-timers-to-tensorboard \
+        --log-batch-size-to-tensorboard \
+        --log-validation-ppl-to-tensorboard \
+        --tensorboard-dir ${TENSORBOARD_DIR}"
+
+config_json="ds_config_cl.json"
+
+deepspeed_options=" \
+		    --deepspeed \
+		    --deepspeed_config ${config_json} \
+		    --pipeline-model-parallel-size ${PP_SIZE} \
+		    --partition-activations"
+
+run_cmd="deepspeed ../../pretrain_gpt.py ${megatron_options} ${deepspeed_options} &>> ${NAME}.log"
+echo ${run_cmd}
+eval ${run_cmd}
+set +x

megatron/arguments.py

@@ -170,6 +170,7 @@ def parse_args(extra_args_provider=None, defaults={},
     # Consumed tokens.
     args.consumed_train_samples = 0
     args.consumed_valid_samples = 0
+    args.consumed_train_tokens = 0
     args.gigaflos_no_embeds = 0
 
     # Iteration-based training.
@@ -428,6 +429,9 @@ def _add_training_args(parser):
                        help='Total number of samples to train over all '
                        'training runs. Note that either train-iters or '
                        'train-samples should be provided.')
+    group.add_argument('--train-tokens', type=int, default=None,
+                       help='Total number of tokens to train over all '
+                       'training runs.')
     group.add_argument('--log-interval', type=int, default=100,
                        help='Report loss and timing interval.')
     group.add_argument('--exit-interval', type=int, default=None,
@@ -495,6 +499,9 @@ def _add_learning_rate_args(parser):
     group.add_argument('--lr-decay-samples', type=int, default=None,
                        help='number of samples to decay learning rate over,'
                        ' If None defaults to `--train-samples`')
+    group.add_argument('--lr-decay-tokens', type=int, default=None,
+                       help='number of tokens to decay learning rate over,'
+                       ' If not None will override iter/sample-based decay')
     group.add_argument('--lr-warmup-fraction', type=float, default=None,
                        help='fraction of lr-warmup-(iters/samples) to use '
                        'for warmup (as a float)')

megatron/checkpointing.py

@@ -127,6 +127,7 @@ def save_checkpoint(iteration, model, optimizer, lr_scheduler):
         state_dict['args'] = args
         state_dict['checkpoint_version'] = 3.0
         state_dict['iteration'] = iteration
+        state_dict['tokens'] = args.consumed_train_tokens
 
         # DeepSpeed saves the model/optimizer/scheduler
         if not args.deepspeed:
@@ -339,6 +340,7 @@ def load_checkpoint(model, optimizer, lr_scheduler, load_arg='load', strict=True
     else:
         try:
             iteration = state_dict['iteration']
+            args.consumed_train_tokens = state_dict['tokens']
         except KeyError:
             try:  # Backward compatible with older checkpoints
                 iteration = state_dict['total_iters']

megatron/learning_rates.py

@@ -17,7 +17,7 @@
 
 import math
 
-from megatron import print_rank_0
+from megatron import print_rank_0, get_args
 
 class AnnealingLR(object):
     """Anneals the learning rate."""
@@ -26,7 +26,7 @@ def __init__(self, optimizer, max_lr, min_lr,
                  warmup_steps, decay_steps, decay_style,
                  use_checkpoint_lr_scheduler=True,
                  override_lr_scheduler=False):
-
+        args = get_args()
         # Class values.
         self.optimizer = optimizer
 
@@ -41,6 +41,10 @@ def __init__(self, optimizer, max_lr, min_lr,
         assert self.decay_steps > 0
         assert self.warmup_steps < self.decay_steps
 
+        self.decay_tokens = args.lr_decay_tokens
+        self.num_tokens = 0
+        self.warmup_tokens = 0
+
         self.decay_style = decay_style
 
         self.override_lr_scheduler = override_lr_scheduler
@@ -61,21 +65,35 @@ def get_lr(self):
 
         # Use linear warmup for the initial part.
         if self.warmup_steps > 0 and self.num_steps <= self.warmup_steps:
+            if self.num_steps == self.warmup_steps and \
+                self.decay_tokens is not None:
+                self.warmup_tokens = self.num_tokens
             return self.max_lr * float(self.num_steps) / \
                 float(self.warmup_steps)
 
         # If the learning rate is constant, just return the initial value.
         if self.decay_style == 'constant':
             return self.max_lr
 
-        # For any steps larger than `self.decay_steps`, use `self.min_lr`.
-        if self.num_steps > self.decay_steps:
-            return self.min_lr
-
-        # If we are done with the warmup period, use the decay style.
-        num_steps_ = self.num_steps - self.warmup_steps
-        decay_steps_ = self.decay_steps - self.warmup_steps
-        decay_ratio = float(num_steps_) / float(decay_steps_)
+        if self.decay_tokens is None:
+            # step-based decay
+
+            # For any steps larger than `self.decay_steps`, use `self.min_lr`.
+            if self.num_steps > self.decay_steps:
+                return self.min_lr
+
+            # If we are done with the warmup period, use the decay style.
+            num_steps_ = self.num_steps - self.warmup_steps
+            decay_steps_ = self.decay_steps - self.warmup_steps
+            decay_ratio = float(num_steps_) / float(decay_steps_)
+        else:
+            # token-based decay
+
+            if self.num_tokens > self.decay_tokens:
+                return self.min_lr
+            num_tokens_ = self.num_tokens - self.warmup_tokens
+            decay_tokens_ = self.decay_tokens - self.warmup_tokens
+            decay_ratio = float(num_tokens_) / float(decay_tokens_)
         assert decay_ratio >= 0.0
         assert decay_ratio <= 1.0
         delta_lr = self.max_lr - self.min_lr
@@ -91,8 +109,12 @@ def get_lr(self):
         return self.min_lr + coeff * delta_lr
 
 
-    def step(self, increment):
+    def step(self, increment, token_num=None):
         """Set lr for all parameters groups."""
+        if token_num is None:
+            args = get_args()
+            token_num = args.consumed_train_tokens
+        self.num_tokens = token_num
         self.num_steps += increment
         new_lr = self.get_lr()
         for group in self.optimizer.param_groups:
@@ -104,6 +126,8 @@ def state_dict(self):
             'max_lr': self.max_lr,
             'warmup_steps': self.warmup_steps,
             'num_steps': self.num_steps,
+            'warmup_tokens': self.warmup_tokens,
+            'num_tokens': self.num_tokens,
             'decay_style': self.decay_style,
             'decay_steps': self.decay_steps,
             'min_lr': self.min_lr
@@ -161,4 +185,6 @@ def load_state_dict(self, sd):
             num_steps = sd['num_iters']
         else:
             num_steps = sd['num_steps']
-        self.step(increment=num_steps)
+        self.warmup_tokens = sd['warmup_tokens']
+        self.num_tokens = sd['num_tokens']
+        self.step(num_steps, self.num_tokens)

megatron/model/gpt_model.py

@@ -102,8 +102,20 @@ def set_input_tensor(self, input_tensor):
 
     def forward(self, input_ids, position_ids, attention_mask, labels=None,
                 tokentype_ids=None, layer_past=None, get_key_value=False,
-                forward_method_parallel_output=None):
-
+                forward_method_parallel_output=None, curriculum_seqlen=None):
+        if curriculum_seqlen is not None:
+            args = get_args()
+            args.curriculum_seqlen = curriculum_seqlen
+            if curriculum_seqlen < input_ids.size()[1]:
+                # seqlen-based curriculum learning
+                # input_ids, position_ids, labels have size [batch size, seqlen]
+                input_ids = input_ids[:, :curriculum_seqlen].contiguous()
+                position_ids = position_ids[:, :curriculum_seqlen].contiguous()
+                labels = labels[:, :curriculum_seqlen].contiguous()
+
+                # attention_mask has size [1, 1, seqlen, seqlen]
+                attention_mask = attention_mask[:, :, :curriculum_seqlen, :curriculum_seqlen].contiguous()
+
         lm_output = self.language_model(
             input_ids,
             position_ids,