EthDKG: An Ethereum-based Distributed Key Generation Protocol

This is the implementation of our corresponding research paper. To familiarize yourself with the implementation run the test cases or execute the protocol by following the instructions below.

Note: An earlier version of the protocol was presented at the CIW'19 workshop at the Financial Cryptography and Data Security 2019 conference. The documentation, paper and slides from the previous version have been moved to the folder ./fc19.

News

Reduction of Gas Costs & Scalability Improvements due to the Implementation of EIP-1108

We just noticed that the next major update for the Ethereum Platform, the Instanbul hardfork planed for October 2019, will implement EIP-1108. The adoption of this improvement proposal, will considerably reduce gas costs for certain elliptic curve operations, used by EthDKG and many other applications, e.g. Matter labs, Aztec, Rollup and Zether.

For example, the gas cost for the ECMUL opcode, we use in our contract for dispute verification is reduced from 40,000 to 6,000 gas. Therefore, we expect a 5 to 6 times reduction in gas costs for handling disputes, which also enables EthDKG to scale beyond 512 nodes. As soon as the Istanbul hardfork is implemented and we are able to rerun our measurements, we will update our evaluation results accordingly.

Getting Started

We provided a docker container (see instruction below) for running the DKG protocol. The docker container can be used to execute the provided test cases as well as the CLI client application. Alternatively, the client application can be run directly on Linux operating systems, we describe both approaches below. Currently, both approaches are tested on Linux only.

It is probably a good idea to read through our paper before going through the instructions below.

Setup using Docker

In the following, we assume basic experience with Docker. To the setup the required dependencies using Docker follow the steps below:

1. Download or clone this repository.
2. Switch to the /scripts folder of this repository.
3. Execute the script docker_init.sh.

The script docker_init.sh first downloads the official docker container for ganache-cli and the Ethereum go client geth. Those are used for running an Ethereum testnet locally or connecting to the ropsten testnet. Second, it builds our ethdkg docker container, by installing the Python 3.7 as well as our Python package with dependencies (see /requirements.txt) inside the container.

Setup without Docker

1. Download or clone this repository.
2. Ensure your have Python 3.7 and pip installed on your system.
3. Switch to the root folder of this repository.
4. Install our ethdkg Python package using the command: python3.7 -m pip install -e .
5. Follow the instructions on https://www.npmjs.com/package/ganache-cli to install ganache-cli locally (or use Ethereum's docker container instead).
6. Optionally, install ganache as graphical alternative to ganache-cli.
7. Optionally, install geth for testing the protocol on the actual Ethereum testnet or mainnet.

Running the Test Cases

In the ./ethdkg folder we provide automated tests for different scenarios, including simulations of adversarial behavior. To execute the test cases perform the following steps:

1. Start a local ganache or ganache-cli instance with appropriate parameters. We recommend that you use either of the pre-configured scripts /scripts/docker_ganache-cli_testing.sh or /scripts/ganache-cli_testing.sh, which both set the parameters for running the test cases correctly.

2. Wait for ganache or ganache-cli to startup.

3. Run the test cases using the command: pytest from the root or /ethdkg folder of the repository. If you using our docker container, you can use the script /scripts/docker_ethdkg.sh to start the docker container to obtain a shell with all required dependencies installed.

The test cases should now execute. Depending on your system running all tests might take a while (approx. 5 min), a the DKG protocol is run multiple times, testing different scenarios and adversarial behavior.

Running the DKG Client Application

The CLI client application dkg.py is located in the /client folder.
Try running python3 dkg.py --help for information more infos on the CLI interface.

1. Start a local ganache or ganache-cli instance with appropriate parameters. We recommend that you use either of the pre-configured scripts /scripts/docker_ganache-cli.sh or /scripts/ganache-cli.sh, which both set the appropriate parameters using for running the DKG protocol, mining is enabled and interval is set to 15 seconds.

2. Wait for ganache or ganache-cli to startup.

3. Deploy the DKG contract using the command python3.7 -m ethdkg deploy. As default the account with index 0 is used for deployment.

4. Run the DKG clients using the commands
   python3.7 -m ethdkg run CONTRACT_ADDRESS --account-index 1,
   python3.7 -m ethdkg run CONTRACT_ADDRESS --account-index 2, ...
   python3.7 -m ethdkg run CONTRACT_ADDRESS --account-index n,
   in separate shells. Again, you can use the script /scripts/docker_ethdkg.sh to start the docker container to obtain a shell with all required dependencies installed, and issue the command within the container.

Now the DKG clients automatically execute the protocol. When the protocol phase changes the DKG client application automatically waits for the next phase to start. If you use ganache or ganache-cli locally you can use you our utilities to speed up the mining process and reduce the waiting time. To immediately mine e.g. 10 new blocks you can use the helper function as follows: python3.7 -c 'from ethdkg import utils; utils.mine_blocks(10)'

To run the protocol in the Ethereum testnet or mainnet use geth instead of ganache-cli. Again we provide helper script for running geth in the /scripts. Additionally, you need to setup and unlock the accounts used for deployment and running the node(s). Take a look at the /evaluation folder for an documented example of the protocol execution in the Ethereum testnet, which also includes a simulation of adversarial behavior.

Helpers

When you modify or experiment with our implementation you might find your helper utilities used within the implementation useful. To use them you can run a interactive Python shell python3.7 -i and import the utilities using from ethdkg import utils.

The you can for example issue the command utils.deploy_contract('ETHDKG') to deploy the contract /contracts/ETHDKG.sol. Or you can use the command utils.mine_block() to instruct ganache to immediately mine a new block, a feature we use extensively to speed up our automated tests. Our utils, automatically handle the connection to the local ganache or geth client and can also be used to interface with deployed contracts (see e.g. the utils.get_contract function).

Donations

If you like the project or want to support its future development, any donations are of course highly appreciated:

Ethereum: 0x8e20877D39AE8Ca118341b1B62787d8e38515e1f
Bitcoin: 1JLLvvrzCYDKyzfpPQo5mjRdfWj8o8Tnq

Security Notice

This software is provided "as is", without warranty of any kind, express or implied (see MIT license). The security of the software critically depends on the choice of various parameters and the correct configuration of the smart contract. The defaults we provide enable simple testing and development but are not suitable for a production deployment. Fell free to contact us if you have additional questions.

List of Dependencies

In the following, we list all dependencies required to run our protocol client with the version number we used. The required python packages are specified in the file /requirements.txt.

• Python (3.7)
• Pip (18.1)
• Solidity compiler solc (0.5.11+commit.22be8592.Linux.g++), provided in the /bin folder
• Ganache (2.1.0)
• Ganache CLI (6.5.1)

Acknowledgements

I would like to express my very great appreciation to my co-authors Aljosha Judmayer and Nicholas Stifter for the excellent collaboration and support throughout the design and implementation of this project, a variety of critical discussions, and their valuable contributions to the paper.