JBoss Forge 2

The fastest way to build applications, share your software, and enjoy doing it.

What’s new and noteworthy?

• Addons: What were previously called "Plugins" in Forge 1, are now "Addons" in Forge 2. This decision was made to clear up confusing verbiage like, "Plugin X has N Plugins" (due to the org.jboss.forge.plugins.Plugin interface.)

• Modular Container fully rewritten: The Forge runtime is now a fully functional Java module system based on JBoss Modules (The same engine behind JBoss AS 7+ and JBoss EAP). This means you may now pick-and-choose which addons are important for you.

• Smaller, leaner, and faster: Forge 2 now sports a slimmer four megabyte download size, and starts up in under three seconds. (Compared to upwards of 10+ seconds for Forge 1)

• Better IDE Integration: Forge 2 addons have been de-coupled from the command line, meaning you can create addons that run as wizards in the IDE, as well as commands in the shell - the same code works in both environments.

We are currently in the process of migrating Forge 1 to Forge 2, so expect to find some Forge 1 functionality missing in the early versions of Forge 2.

See the JavaDocs here

Download Forge 2:

Forge 2 is packaged inside an Eclipse plugin and also as a standalone ZIP file. They are independent of each other.

• Eclipse Update Site for Eclipse Luna (Eclipse 4.4) - http://download.jboss.org/jbosstools/builds/staging/jbosstools-forge_master/all/repo/

• Command line tools

Get Started with the Command line tools:

Getting started with the command line tools is easy:

• Download a distribution

  1. Download JBoss Forge - Offline (Recommended)

     1. This ZIP contains the Forge runtime + Core Addons

  2. Download JBoss Forge - No Addons

     1. This ZIP contains the Forge runtime only

• Extract the ZIP to a directory and navigate to forge-distribution-VERSION/bin directory

• Execute forge by running

    forge

Forge is now ready to go.

Install addons (not needed if using the offline zip)

Install the required addons by running the following commands:

    forge --install groupId:artifactId,version

• Forge will install the required dependencies for each addon.

Important

Make sure your settings.xml is properly configured to use the Maven central repository or, if you wish to use a SNAPSHOT version from a core addon, the JBoss Nexus Repository, otherwise the installation will fail. Instructions on how to setup your settings.xml can be found on https://community.jboss.org/wiki/MavenGettingStarted-Developers

If you wish to install the core addons including the shell, "Project: New", the "Java EE" commands, and all other provided functionality, you should run the following command:

    forge --install core

If you only wish to install the Forge 2 Shell based on Aesh, run the following command instead:

    forge --install shell

If you wish to remove any addon, you can use the following command:

    forge --remove groupId:artifactId,version

Get Started with the Forge 2 Eclipse Plugin:

Forge 2 is known to work with Eclipse Luna (Eclipse 4.4) or higher versions. Older versions of Eclipse are not supported.

• Install the JBoss Tools Usage Reporting plugin, available in http://download.jboss.org/jbosstools/updates/development/luna/ and restart Eclipse

• Install the Forge 2 Eclipse Plugin from http://download.jboss.org/jbosstools/builds/staging/jbosstools-forge_master/all/repo/ and restart Eclipse

This plugin starts the Forge 2 Container and your installed addons, so you can use them directly in your workspace

• Press Ctrl + 4 to show the installed addons that you may interact with (these addons use the UI addon, hence providing a user interface - see Developing an UI Addon for more details).

Available addons

Addon name	Included in Eclipse Plugin ?
Addon Manager	yes
Addons	yes
Configuration	yes
Convert	yes
Dependencies	yes
Dev Tools - Java	yes
Environment	yes
Facets	yes
Git	yes
Java EE	yes
Maven	yes
Parser Java	yes
Parser Json	yes
Parser XML	yes
Projects	yes
Resources	yes
Scaffold	yes
Shell	yes
Templates	yes
Text	yes
User Interface (UI)	yes

Developing an Addon

Forge addons are simple Maven projects with a special classifier "forge-addon". This classifier is used while installing an addon so the Furnace container can calculate its dependencies, freeing you from Classloader hell.

One of the most important things to know about developing a Forge addon, is that the Furnace runtime container (the core of Forge), is actually an embeddable, modular Java container. This means that each addon has its own ClassLoader and that addons share classes from each other, in addition to supplying their own local classes. Furnace builds a graph of addon dependencies at runtime, and automatically calculates which addons should see classes from other addons.

For now, however, just treat your first addon as if it were any other Java project. The differences between a "modular" and "traditional" environment are not as great as you might think, and the Furnace development model has been created in a way that should make these differences seem natural, almost transparent.

Create a Maven project

Forge Addons must be JARs published with a 'forge-addon' classifier. Add this plugin configuration to your pom.xml:

<build>
   <plugins>
      <plugin>
         <groupId>org.apache.maven.plugins</groupId>
         <artifactId>maven-jar-plugin</artifactId>
         <executions>
            <execution>
               <id>create-forge-addon</id>
               <phase>package</phase>
               <goals>
                  <goal>jar</goal>
               </goals>
               <inherited>false</inherited>
               <configuration>
                  <classifier>forge-addon</classifier>
               </configuration>
            </execution>
         </executions>
      </plugin>
   </plugins>
</build>

In order to use CDI and services from other addons in your addon, you’ll need to reference the Furnace CDI container addon as a dependency your pom.xml file:

<dependency>
   <groupId>org.jboss.forge.furnace.container</groupId>
   <artifactId>cdi</artifactId>
   <classifier>forge-addon</classifier>
   <scope>provided</scope>
</dependency>

Caution

Addon dependencies MUST be declared in the Maven pom.xml that produces your forge-addon classified artifact; otherwise, Furnace will NOT use this dependency as a forge-addon. Instead, addon dependencies declared via transitive dependencies will be included as local JAR files and re-bundled with your addon. More than likely, re-bundling a forge-addon in your Addon is NOT what you want.

Your complete POM should now look something like this:

<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
   <modelVersion>4.0.0</modelVersion>

   <groupId>com.example</groupId>
   <artifactId>example</artifactId>
   <version>0.0.1-SNAPSHOT</version>

   <name>My First Addon</name>

   <dependencies>
      <dependency>
         <groupId>org.jboss.forge.furnace.container</groupId>
         <artifactId>cdi</artifactId>
         <classifier>forge-addon</classifier>
         <scope>provided</scope>
      </dependency>
   </dependencies>

   <build>
      <plugins>
         <plugin>
            <groupId>org.apache.maven.plugins</groupId>
            <artifactId>maven-jar-plugin</artifactId>
            <executions>
               <execution>
                  <id>create-forge-addon</id>
                  <phase>package</phase>
                  <goals>
                     <goal>jar</goal>
                  </goals>
                  <inherited>false</inherited>
                  <configuration>
                     <classifier>forge-addon</classifier>
                  </configuration>
               </execution>
            </executions>
         </plugin>
      </plugins>
   </build>
</project>

Add behavior to your addon

A service is implemented as a POJO (Plain Old Java Object):

public class ExampleServiceImpl
{
   public String doSomething() {
        // Do stuff...
   }
}

However, best practices favor creating a service interface, otherwise consumers will be required to request your specific service implementation. For example:

public interface ExampleService
{
   public String doSomething();
}

Then simply implement the service interface:

public class ExampleServiceImpl implements ExampleService
{
   public String doSomething() {
        // Do stuff...
   }
}

Re-use functionality from other addons:

Forge has a modular architecture that enables you to re-use functionality from other addons, directly in your own addon code. In order to achieve this, you must add addon-dependencies in your pom.xml file.

<project>
   ...

   <dependencies>
      <!-- Addon Dependencies -->
      <dependency>
         <groupId>org.jboss.forge.addon</groupId>
         <artifactId>resources</artifactId>
         <classifier>forge-addon</classifier>
         <scope>provided</scope>
      </dependency>
      <dependency>
         <groupId>org.jboss.forge.addon</groupId>
         <artifactId>ui</artifactId>
         <classifier>forge-addon</classifier>
         <scope>provided</scope>
      </dependency>

      <!-- Furnace Container -->
      <dependency>
         <groupId>org.jboss.forge.furnace.container</groupId>
         <artifactId>cdi</artifactId>
         <classifier>forge-addon</classifier>
         <scope>provided</scope>
      </dependency>
   </dependencies>

   ...
</project>

What scope should my addon dependencies be?

There is a simple rule that will make this an easy decision:

"`compile` if everyone knows, provided if I know, runtime if nobody knows."

To explain, if you never publicly expose types (classes, interfaces, etc…​) from another addon in the outward-facing APIs of your addon, then you should include that addon as provided scope. If you do, however, expose classes from that addon in the public APIs of your code, then that addon should be labeled as compile scope (default,) which means that this dependency will be 'exported' to consumers that depend on your addon.

Addon dependencies may also be made optional if consumers of your addon should be able to choose whether or not certain functionality is enabled, or if your addon behaves differently when other addons are already deployed to the container.

The following chart explains this in detail. Assume that our addon depends on the resources addon, which provides the ResourceFactory and FileResource classes:

Example	Scope should be	Explanation
The Resource<?> and ResourceFactory types are provided by the resources addon. Your addon defines InternalExample. public class InternalExample { @Inject private ResourceFactory factory; public void doSomething(File file) { Resource<?> r = factory.create(file); System.out.println("New resource: " + r)a } }	provided	Consumers of your addon never see classes or interfaces from the resources addon; it is only used internally as an implementation detail and is not exposed in your public API. Your addon should depend on the resources addon at provided scope.
The Resource<?> and ResourceFactory types are provided by the resources addon. Your addon defines ExposedExample. public class ExposedExample { @Inject private ResourceFactory factory; public Resource<?> doSomething(File file) { Resource<?> r = factory.create(file); return r; } }	compile	Consumers of your addon require classes from the resources addon to interact with your code, since it has been referenced in the your addon’s public API. Your addon should depend on the resources addon at compile scope.
The type LockCreator is defined by addon X. public class LockCreator { public void createFile( @Observes PostStartup event) { File lock = new File("lockfile"); lock.createNewFile(); } } Your addon defines LockConsumer, which requires that a file "lockfile" be available when it runs. This file is created by addon X. public class LockConsumer { public void deleteLock() { File lock = new File("lockfile"); Assert.assertTrue(lock.exists()); } }	runtime	Your addon makes assumptions about the runtime environment that are satisfied by the presence of addon X, but your addon does not depend on or expose types from addon X in its APIs. Your addon should include addon X at runtime scope.
The type Logger is defined by addon X, but addon X does not include an implementation of its own logging interface. public interface Logger { public void log(String message) } Your addon defines LoggerConsumer, which depends on addon X in order to use Logger, but requires that another addon (addon Y) actually provide an logging implementation. public class LoggerConsumer { @Inject private Imported<Logger> loggers; public void logEverything() { for( Logger log : loggers { log.log("Log for you!"); } } }	provided / runtime	Your addon requires instances of Logger, which is defined in addon X, but provided by addon Y (for instance), thus your addon requires addon Y to provide an instance of Logger, but does not need to import or compile against addon Y’s types directly (they are provided by Furnace). Your addon does not expose the Logger type from addon X in its APIs. Your addon should include addon X at provided scope, and addon Y at runtime scope.

Test your addon

One of the most important concepts of writing a Forge addon is writing tests using the Furnace test harness. This allows you to test your code in an actual Furnace environment, and verify that things are behaving as expected. Typically we suggest using a separate project to test your addon in order to keep concerns separate, which tends to lead to cleaner code and fewer surprises.

For simplicity’s sake, we’ll assume that your addon uses the default Furnace container (org.jboss.forge.furnace.container:cdi).

Set up the test-harness in your build descriptor (pom.xml)

Add the following dependencies to your pom.xml file if they are not already there. Make sure that the Furnace versions are the same as the rest of your project.

<dependency>
   <groupId>org.jboss.forge.furnace.test</groupId>
   <artifactId>furnace-test-harness</artifactId>
   <version>FURNACE_VERSION</version>
   <scope>test</scope>
</dependency>
<dependency>
   <groupId>org.jboss.forge.furnace.test</groupId>
   <artifactId>arquillian-furnace-classpath</artifactId>
   <version>FURNACE_VERSION</version>
   <scope>test</scope>
</dependency>

If you are writing tests in a separate project or sub-project, you should also add a dependency to your addon, or to the addon you wish to test (you can test anything you like.)

<dependency>
   <groupId>com.example</groupId>
   <artifactId>example</artifactId>
   <classifier>forge-addon</classifier>
   <version>YOUR_VERSION</version>
   <scope>test</scope>
</dependency>

Write your first test

Now, you’ll need to create a test class with the following layout, using the standard JUnit test APIs:

package org.example;

import org.jboss.arquillian.container.test.api.Deployment;
import org.jboss.arquillian.junit.Arquillian;
import org.jboss.forge.arquillian.archive.ForgeArchive;
import org.jboss.shrinkwrap.api.ShrinkWrap;
import org.junit.Assert;
import org.junit.Test;
import org.junit.runner.RunWith;

@RunWith(Arquillian.class)
public class ExampleFurnaceTest {

   @Deployment
   public static ForgeArchive getDeployment() {
      ForgeArchive archive = ShrinkWrap.create(ForgeArchive.class);
      return archive;
   }

   @Test
   public void testSomething() throws Exception {
      Assert.fail("Not implemented");
   }
}

Then you’ll need to add some configuration so that your addon will be deployed to the test environment. This is done using the @AddonDependency annotation. You’ll also need to add an addon dependency link from your test case to your addon (otherwise the test case will not be able to use any of your addon’s classes or services.)

@RunWith(Arquillian.class)
public class ExampleFurnaceTest {

   @Deployment
   @Dependencies({
       @AddonDependency(name = "org.example:example", version = "YOUR_VERSION")
   })
   public static ForgeArchive getDeployment() {
      ForgeArchive archive = ShrinkWrap.create(ForgeArchive.class)
         .addBeansXML()
         .addAsAddonDependencies(
            AddonDependencyEntry.create("org.example:example", "YOUR_VERSION"),
         );
      return archive;
   }

   @Test
   public void testSomething() throws Exception {
      Assert.fail("Not implemented");
   }
}

Note	The @Dependencies annotation is used to specify addons that must be deployed before the Addon-Under-Test is deployed in Furnace. The AddonDependencyEntry.create(…​) method is used to specify addons that the Addon-Under-Test depends on.

Now that the test case deploys and depends on your addon, you may access services from it via injection:

@RunWith(Arquillian.class)
public class ExampleFurnaceTest {

   @Deployment
   @Dependencies({
       @AddonDependency(name = "org.example:example", version = "YOUR_VERSION")
   })
   public static ForgeArchive getDeployment() {
      ForgeArchive archive = ShrinkWrap.create(ForgeArchive.class)
         .addBeansXML()
         .addAsAddonDependencies(
            AddonDependencyEntry.create("org.example:example", "YOUR_VERSION"),
         );
      return archive;
   }

   @Inject
   private ExampleService service;

   @Test
   public void testSomething() throws Exception {
      Assert.assertNotNull(service);
      Assert.assertNotNull(service.doSomething());
   }
}

This is the basic premise of using the test-harness. For detailed examples, take a look at some of the existing Forge test cases in our github repository.

Note

The version parameter in @AddonDependency and in the AddonDependencyEntry.create(…​) method are optional. By not specifying them means that the test harness will attempt to find the version based on the tests' build descriptor (pom.xml). In this case, if the dependent addon is not present in the tests' build descriptor, the test execution should fail.

Install your addon in the local maven repository:

Depending on the Forge environment in which you are running, installation steps will differ.

For Eclipse

Open the Forge quick-assist menu, select either "Build and install an Addon" or "Install an addon" to build and install your project, or install a pre-built maven artifact.

For the Shell

    mvn clean install

Run

    ./forge --install yourgroupId:artifactId,version

Warning

This coordinate is NOT the same as Maven’s. You MUST use a comma (,) between the artifactId and the version.