This extension uses WeeWX Xtypes capability to dynamically calculate AQI. Currently it only supports pm 2.5 and pm 10. For supported pollutants, mutiple sensors are supported. Currently only the US EPA algorithm is supported.
Because there are multiple methods to install WeeWX, location of files can vary. See where to find things in the WeeWX User's Guide for the definitive information. The following symbolic names are used to define the various locations:
- $DOWNLOAD_ROOT - The directory containing the downloaded weewx-aqi-xtype extension.
- $BIN_ROOT - The directory where WeeWX executables are located.
- $CONFIG_ROOT - The directory where the configuration (typically, weewx.conf) is located.
The notation vX.Y.Z designates the version being installed. X.Y.Z is the release.
Prior to making any updates/changes, always make a backup.
| WeeWX version | Python version |
|---|---|
| 4.6.0 or greater | Python 3.6 or greater |
-
Download weewx-aqi-xtype
wget -P $DOWNLOAD_ROOT https://github.com/bellrichm/weewx-aqi-ztype/archive/vX.Y.Z.tar.gzAll of the releases can be found here and this is the latest.
-
Install weewx-aqi-xtype
wee_extension --install=$DOWNLOAD_DIR/vX.Y.Z.tar.gz -
Restart WeeWX
sudo /etc/init.d/weewx restartor
sudo sudo service restart weewxor
sudo systemctl restart weewx
The installation of weewx-aqi-xtype configures it so that will work with the WeeWX 'extended schema.'
It will calculate the Instacast AQI and Nowcast AQI for the value of pm 2.5.
To do this three sections of weewx configuration are updated.
The first is [[[Generic]]] section of [StdReport][[Labels]].
Here the default label is added.
[StdReport]
[[Labels]]
[[[Generic]]]
.
.
.
pm2_5_aqi = AQI
pm2_5_aqi_nowcast = AQI (Nowcast)
The second is the [[Calculations]] section of [StdWXCalculate].
Here, the calculated AQI field is added.
Doing this adds it to the WeeWX loop packets and archive records.
[StdWXCalculate]
[[Calculations]]
.
.
.
pm2_5_aqi = prefer_hardware
# Since this requires a database look up, by default do not populate loop packets
pm2_5_aqi_nowcast = prefer_hardware, archive
The third update is an additional section, [aqitype].
This is where the information needed to calculate the AQI is configured.
[aqitype]
# The name of AQI field.
# Create a section for each field to be calculated.
[[pm2_5_aqi]]
# The name of the WeeWX observation to be used in the calculation.
input = pm2_5
# The name of the algorithm.
# Supported values: EPAAQI
algorithm = EPAAQI
# If the algorithm supports different pollutants(pm 2.5, pm 10, etc)
# Supported values: pm2_5, pm10
type = pm2_5
[[pm2_5_aqi_nowcast]]
# The name of the WeeWX observation to be used in the calculation.
input = pm2_5
# The name of the algorithm.
# Supported values: EPAAQI, NOWCAST
algorithm = NOWCAST
# If the algorithm supports different pollutants(pm 2.5, pm 10, etc)
# Supported values: pm2_5, pm10
type = pm2_5
Suppose one has a second air quality sensor and WeeWX has been configured to store it in pm2_51.
To calculate the AQI value for this sensor, both the [[Calculations]] section and [aqitype] section need to be updated.
The result should look something like this.
[StdReport]
[[Labels]]
[[[Generic]]]
.
.
.
pm2_5_aqi = Inside AQI
pm2_5_aqi = Outside AQI
pm2_5_aqi_nowcast = Inside AQI (Nowcast)
pm2_51_aqi_nowcast = Outside AQI (Nowcast)
[StdWXCalculate]
[[Calculations]]
.
.
.
pm2_5_aqi = prefer_hardware
pm2_51_aqi = prefer_hardware
# Since this requires a database look up, by default do not populate loop packets
pm2_5_aqi_nowcast = prefer_hardware, archive
pm2_51_aqi_nowcast = prefer_hardware, archive
[aqitype]
# The name of AQI field.
# Create a section for each field to be calculated.
[[pm2_5_aqi]]
# The name of the WeeWX observation to be used in the calculation.
input = pm2_5
# The name of the algorithm.
# Supported values: EPAAQI
algorithm = EPAAQI
# If the algorithm supports different pollutants(pm 2.5, pm 10, etc)
# Supported values: pm2_5, pm10
type = pm2_5
[[pm2_51_aqi]]
# The name of the WeeWX observation to be used in the calculation.
input = pm2_51
# The name of the algorithm.
# Supported values: EPAAQI
algorithm = EPAAQI
# If the algorithm supports different pollutants(pm 2.5, pm 10, etc)
# Supported values: pm2_5, pm10
type = pm2_5
[[pm2_51_aqi_nowcast]]
# The name of the WeeWX observation to be used in the calculation.
input = pm2_51
# The name of the algorithm.
# Supported values: EPAAQI, NOWCAST
algorithm = NOWCAST
# If the algorithm supports different pollutants(pm 2.5, pm 10, etc)
# Supported values: pm2_5, pm10
type = pm2_5
By default aqi_xtype is added to the beginning of the list of xtypes.
This has the effect of overriding other xtypes (except for any added to the beginning after aqi-xtype).
If for some reason it is desired to add it to the end, set prepend = False
[aqitype]
# Add aqi-xtype to the end of the list of xtypes.
prepend = False
Now the calculated value, pm2_5_aqi can be used like any built-in WeeWX type.
Note: Nowcast values are only available with the $current and $latest tags. It does not support aggregation nor series.
For example, in a Cheetah template
| Desired display | Cheetah code |
|---|---|
| Current value | $current.pm2_5_aqi |
| Maximum value for the year | $year.pm2_5_aqi.max |
| A json series of maximum values for the days of the current year | $year.pm2_5_aqi.series(aggregate_type='max', aggregate_interval='day').json |
The values are also available to the builtin WeeWX charting subsystem Here are two charts. One of the calculated pm 2.5 AQI. The scond of the pm 2.5 values.
[[year_images]]
aggregate_type = max
aggregate_interval = 86400
[[[yearaqi]]]
yscale = 0, None, None
[[[[pm2_5_aqi]]]]
[[[yearpm2_5]]]
yscale = 0, None, None
[[[[pm2_5]]]]
The values are also available to user extensions. For exanmple a graph in the weewx-jas would look like this
[[jas]]
[[[Extras]]]
[[[[chart_definitions]]]]
[[[[[pm]]]]]
[[[[[[series]]]]]]
[[[[[[[pm2_5]]]]]]]
yAxisIndex = 0
[[[[[[[pm2_5_aqi]]]]]]]
yAxisIndex = 1
[[[[[[[pm10_0]]]]]]]
In addition to the XTtype to calculate the AQI, WeeWX-aqi-xtype has a WeeWX SearchList extension which given an AQI value and standard/algorithm will return the associated color hex value. It also can look up the AQI label for a given AQI value and standard/algorithm.
This is called like, $AQIColor(value, standard).
This is called like, $AQIDescription(value, standard).
Feel free to open an issue, start a discussion in github, or post on WeeWX google group. When doing so, see Help! Posting to weewx user for information on capturing the log. And yes, capturing the log from WeeWX startup makes debugging much easeier.