Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

usb_otg_register_gadget: device not registered to otg core #65

Closed
asebak opened this issue Feb 1, 2016 · 2 comments
Closed

usb_otg_register_gadget: device not registered to otg core #65

asebak opened this issue Feb 1, 2016 · 2 comments

Comments

@asebak
Copy link

asebak commented Feb 1, 2016

I enabled functionfs for linux kernel 3.14 but on startup I get this error message:

[ 6.626079] g_ffs gadget: g_ffs ready
[ 6.629822] musb-hdrc musb-hdrc.0.auto: otg: usb_otg_register_gadget: device not registered to otg core

Do you know what configuration for the kernel or dts file I need to solve this issue?
@RobertCNelson
Copy link
Member

Please confirm if this is an issue in 4.1/4.4 branches

RobertCNelson pushed a commit that referenced this issue Apr 22, 2016
@gregkh
ipv6: Count in extension headers in skb->network_header
5598928 
[ Upstream commit 3ba3458 ]

When sending a UDPv6 message longer than MTU, account for the length
of fragmentable IPv6 extension headers in skb->network_header offset.
Same as we do in alloc_new_skb path in __ip6_append_data().

This ensures that later on __ip6_make_skb() will make space in
headroom for fragmentable extension headers:

	/* move skb->data to ip header from ext header */
	if (skb->data < skb_network_header(skb))
		__skb_pull(skb, skb_network_offset(skb));

Prevents a splat due to skb_under_panic:

skbuff: skb_under_panic: text:ffffffff8143397b len:2126 put:14 \
head:ffff880005bacf50 data:ffff880005bacf4a tail:0x48 end:0xc0 dev:lo
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:104!
invalid opcode: 0000 [#1] KASAN
CPU: 0 PID: 160 Comm: reproducer Not tainted 4.6.0-rc2 #65
[...]
Call Trace:
 [<ffffffff813eb7b9>] skb_push+0x79/0x80
 [<ffffffff8143397b>] eth_header+0x2b/0x100
 [<ffffffff8141e0d0>] neigh_resolve_output+0x210/0x310
 [<ffffffff814eab77>] ip6_finish_output2+0x4a7/0x7c0
 [<ffffffff814efe3a>] ip6_output+0x16a/0x280
 [<ffffffff815440c1>] ip6_local_out+0xb1/0xf0
 [<ffffffff814f1115>] ip6_send_skb+0x45/0xd0
 [<ffffffff81518836>] udp_v6_send_skb+0x246/0x5d0
 [<ffffffff8151985e>] udpv6_sendmsg+0xa6e/0x1090
[...]

Reported-by: Ji Jianwen <[email protected]>
Signed-off-by: Jakub Sitnicki <[email protected]>
Acked-by: Hannes Frederic Sowa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson pushed a commit that referenced this issue Apr 12, 2018
@gregkh
l2tp: fix races with ipv4-mapped ipv6 addresses
b085060 
commit b954f94 upstream.

The l2tp_tunnel_create() function checks for v4mapped ipv6
sockets and cache that flag, so that l2tp core code can
reusing it at xmit time.

If the socket is provided by the userspace, the connection
status of the tunnel sockets can change between the tunnel
creation and the xmit call, so that syzbot is able to
trigger the following splat:

BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:192
[inline]
BUG: KASAN: use-after-free in ip6_xmit+0x1f76/0x2260
net/ipv6/ip6_output.c:264
Read of size 8 at addr ffff8801bd949318 by task syz-executor4/23448

CPU: 0 PID: 23448 Comm: syz-executor4 Not tainted 4.16.0-rc4+ #65
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:17 [inline]
  dump_stack+0x194/0x24d lib/dump_stack.c:53
  print_address_description+0x73/0x250 mm/kasan/report.c:256
  kasan_report_error mm/kasan/report.c:354 [inline]
  kasan_report+0x23c/0x360 mm/kasan/report.c:412
  __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
  ip6_dst_idev include/net/ip6_fib.h:192 [inline]
  ip6_xmit+0x1f76/0x2260 net/ipv6/ip6_output.c:264
  inet6_csk_xmit+0x2fc/0x580 net/ipv6/inet6_connection_sock.c:139
  l2tp_xmit_core net/l2tp/l2tp_core.c:1053 [inline]
  l2tp_xmit_skb+0x105f/0x1410 net/l2tp/l2tp_core.c:1148
  pppol2tp_sendmsg+0x470/0x670 net/l2tp/l2tp_ppp.c:341
  sock_sendmsg_nosec net/socket.c:630 [inline]
  sock_sendmsg+0xca/0x110 net/socket.c:640
  ___sys_sendmsg+0x767/0x8b0 net/socket.c:2046
  __sys_sendmsg+0xe5/0x210 net/socket.c:2080
  SYSC_sendmsg net/socket.c:2091 [inline]
  SyS_sendmsg+0x2d/0x50 net/socket.c:2087
  do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x453e69
RSP: 002b:00007f819593cc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f819593d6d4 RCX: 0000000000453e69
RDX: 0000000000000081 RSI: 000000002037ffc8 RDI: 0000000000000004
RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000004c3 R14: 00000000006f72e8 R15: 0000000000000000

This change addresses the issues:
* explicitly checking for TCP_ESTABLISHED for user space provided sockets
* dropping the v4mapped flag usage - it can become outdated - and
  explicitly invoking ipv6_addr_v4mapped() instead

The issue is apparently there since ancient times.

v1 -> v2: (many thanks to Guillaume)
 - with csum issue introduced in v1
 - replace pr_err with pr_debug
 - fix build issue with IPV6 disabled
 - move l2tp_sk_is_v4mapped in l2tp_core.c

v2 -> v3:
 - don't update inet_daddr for v4mapped address, unneeded
 - drop rendundant check at creation time

Reported-and-tested-by: [email protected]
Fixes: 3557baa ("[L2TP]: PPP over L2TP driver core")
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
crow-misia pushed a commit to crow-misia/linux that referenced this issue Mar 3, 2019
@paulburton @gregkh
MIPS: eBPF: Always return sign extended 32b values
4db02ac 
commit 1344315 upstream.

The function prototype used to call JITed eBPF code (ie. the type of the
struct bpf_prog bpf_func field) returns an unsigned int. The MIPS n64
ABI that MIPS64 kernels target defines that 32 bit integers should
always be sign extended when passed in registers as either arguments or
return values.

This means that when returning any value which may not already be sign
extended (ie. of type REG_64BIT or REG_32BIT_ZERO_EX) we need to perform
that sign extension in order to comply with the n64 ABI. Without this we
see strange looking test failures from test_bpf.ko, such as:

  test_bpf: beagleboard#65 ALU64_MOV_X:
    dst = 4294967295 jited:1 ret -1 != -1 FAIL (1 times)

Although the return value printed matches the expected value, this is
only because printf is only examining the least significant 32 bits of
the 64 bit register value we returned. The register holding the expected
value is sign extended whilst the v0 register was set to a zero extended
value by our JITed code, so when compared by a conditional branch
instruction the values are not equal.

We already handle this when the return value register is of type
REG_32BIT_ZERO_EX, so simply extend this to also cover REG_64BIT.

Signed-off-by: Paul Burton <[email protected]>
Fixes: b6bd53f ("MIPS: Add missing file for eBPF JIT.")
Cc: [email protected] # v4.13+
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson pushed a commit that referenced this issue Mar 27, 2019
@paulburton @gregkh
MIPS: eBPF: Always return sign extended 32b values
b3f5fbb 
commit 1344315 upstream.

The function prototype used to call JITed eBPF code (ie. the type of the
struct bpf_prog bpf_func field) returns an unsigned int. The MIPS n64
ABI that MIPS64 kernels target defines that 32 bit integers should
always be sign extended when passed in registers as either arguments or
return values.

This means that when returning any value which may not already be sign
extended (ie. of type REG_64BIT or REG_32BIT_ZERO_EX) we need to perform
that sign extension in order to comply with the n64 ABI. Without this we
see strange looking test failures from test_bpf.ko, such as:

  test_bpf: #65 ALU64_MOV_X:
    dst = 4294967295 jited:1 ret -1 != -1 FAIL (1 times)

Although the return value printed matches the expected value, this is
only because printf is only examining the least significant 32 bits of
the 64 bit register value we returned. The register holding the expected
value is sign extended whilst the v0 register was set to a zero extended
value by our JITed code, so when compared by a conditional branch
instruction the values are not equal.

We already handle this when the return value register is of type
REG_32BIT_ZERO_EX, so simply extend this to also cover REG_64BIT.

Signed-off-by: Paul Burton <[email protected]>
Fixes: b6bd53f ("MIPS: Add missing file for eBPF JIT.")
Cc: [email protected] # v4.13+
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson pushed a commit that referenced this issue Sep 25, 2019
@LorenzoBianconi @gregkh
net: neigh: fix multiple neigh timer scheduling
257441a 
[ Upstream commit 071c379 ]

Neigh timer can be scheduled multiple times from userspace adding
multiple neigh entries and forcing the neigh timer scheduling passing
NTF_USE in the netlink requests.
This will result in a refcount leak and in the following dump stack:

[   32.465295] NEIGH: BUG, double timer add, state is 8
[   32.465308] CPU: 0 PID: 416 Comm: double_timer_ad Not tainted 5.2.0+ #65
[   32.465311] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014
[   32.465313] Call Trace:
[   32.465318]  dump_stack+0x7c/0xc0
[   32.465323]  __neigh_event_send+0x20c/0x880
[   32.465326]  ? ___neigh_create+0x846/0xfb0
[   32.465329]  ? neigh_lookup+0x2a9/0x410
[   32.465332]  ? neightbl_fill_info.constprop.0+0x800/0x800
[   32.465334]  neigh_add+0x4f8/0x5e0
[   32.465337]  ? neigh_xmit+0x620/0x620
[   32.465341]  ? find_held_lock+0x85/0xa0
[   32.465345]  rtnetlink_rcv_msg+0x204/0x570
[   32.465348]  ? rtnl_dellink+0x450/0x450
[   32.465351]  ? mark_held_locks+0x90/0x90
[   32.465354]  ? match_held_lock+0x1b/0x230
[   32.465357]  netlink_rcv_skb+0xc4/0x1d0
[   32.465360]  ? rtnl_dellink+0x450/0x450
[   32.465363]  ? netlink_ack+0x420/0x420
[   32.465366]  ? netlink_deliver_tap+0x115/0x560
[   32.465369]  ? __alloc_skb+0xc9/0x2f0
[   32.465372]  netlink_unicast+0x270/0x330
[   32.465375]  ? netlink_attachskb+0x2f0/0x2f0
[   32.465378]  netlink_sendmsg+0x34f/0x5a0
[   32.465381]  ? netlink_unicast+0x330/0x330
[   32.465385]  ? move_addr_to_kernel.part.0+0x20/0x20
[   32.465388]  ? netlink_unicast+0x330/0x330
[   32.465391]  sock_sendmsg+0x91/0xa0
[   32.465394]  ___sys_sendmsg+0x407/0x480
[   32.465397]  ? copy_msghdr_from_user+0x200/0x200
[   32.465401]  ? _raw_spin_unlock_irqrestore+0x37/0x40
[   32.465404]  ? lockdep_hardirqs_on+0x17d/0x250
[   32.465407]  ? __wake_up_common_lock+0xcb/0x110
[   32.465410]  ? __wake_up_common+0x230/0x230
[   32.465413]  ? netlink_bind+0x3e1/0x490
[   32.465416]  ? netlink_setsockopt+0x540/0x540
[   32.465420]  ? __fget_light+0x9c/0xf0
[   32.465423]  ? sockfd_lookup_light+0x8c/0xb0
[   32.465426]  __sys_sendmsg+0xa5/0x110
[   32.465429]  ? __ia32_sys_shutdown+0x30/0x30
[   32.465432]  ? __fd_install+0xe1/0x2c0
[   32.465435]  ? lockdep_hardirqs_off+0xb5/0x100
[   32.465438]  ? mark_held_locks+0x24/0x90
[   32.465441]  ? do_syscall_64+0xf/0x270
[   32.465444]  do_syscall_64+0x63/0x270
[   32.465448]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix the issue unscheduling neigh_timer if selected entry is in 'IN_TIMER'
receiving a netlink request with NTF_USE flag set

Reported-by: Marek Majkowski <[email protected]>
Fixes: 0c5c2d3 ("neigh: Allow for user space users of the neighbour table")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
@pdp7
Copy link
Contributor

pdp7 commented Jun 10, 2020

Please re-open if still an issue

@pdp7 pdp7 closed this as completed Jun 10, 2020
RobertCNelson pushed a commit that referenced this issue Dec 8, 2022
@gregkh
x86/unwind/orc: Fix unreliable stack dump with gcov
b55d6ea 
[ Upstream commit 230db82 ]

When a console stack dump is initiated with CONFIG_GCOV_PROFILE_ALL
enabled, show_trace_log_lvl() gets out of sync with the ORC unwinder,
causing the stack trace to show all text addresses as unreliable:

  # echo l > /proc/sysrq-trigger
  [  477.521031] sysrq: Show backtrace of all active CPUs
  [  477.523813] NMI backtrace for cpu 0
  [  477.524492] CPU: 0 PID: 1021 Comm: bash Not tainted 6.0.0 #65
  [  477.525295] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014
  [  477.526439] Call Trace:
  [  477.526854]  <TASK>
  [  477.527216]  ? dump_stack_lvl+0xc7/0x114
  [  477.527801]  ? dump_stack+0x13/0x1f
  [  477.528331]  ? nmi_cpu_backtrace.cold+0xb5/0x10d
  [  477.528998]  ? lapic_can_unplug_cpu+0xa0/0xa0
  [  477.529641]  ? nmi_trigger_cpumask_backtrace+0x16a/0x1f0
  [  477.530393]  ? arch_trigger_cpumask_backtrace+0x1d/0x30
  [  477.531136]  ? sysrq_handle_showallcpus+0x1b/0x30
  [  477.531818]  ? __handle_sysrq.cold+0x4e/0x1ae
  [  477.532451]  ? write_sysrq_trigger+0x63/0x80
  [  477.533080]  ? proc_reg_write+0x92/0x110
  [  477.533663]  ? vfs_write+0x174/0x530
  [  477.534265]  ? handle_mm_fault+0x16f/0x500
  [  477.534940]  ? ksys_write+0x7b/0x170
  [  477.535543]  ? __x64_sys_write+0x1d/0x30
  [  477.536191]  ? do_syscall_64+0x6b/0x100
  [  477.536809]  ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
  [  477.537609]  </TASK>

This happens when the compiled code for show_stack() has a single word
on the stack, and doesn't use a tail call to show_stack_log_lvl().
(CONFIG_GCOV_PROFILE_ALL=y is the only known case of this.)  Then the
__unwind_start() skip logic hits an off-by-one bug and fails to unwind
all the way to the intended starting frame.

Fix it by reverting the following commit:

  f1d9a2a ("x86/unwind/orc: Don't skip the first frame for inactive tasks")

The original justification for that commit no longer exists.  That
original issue was later fixed in a different way, with the following
commit:

  f2ac57a ("x86/unwind/orc: Fix inactive tasks with stack pointer in %sp on GCC 10 compiled kernels")

Fixes: f1d9a2a ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
Signed-off-by: Chen Zhongjin <[email protected]>
[jpoimboe: rewrite commit log]
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Peter Zijlstra <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
3 participants
@RobertCNelson @pdp7 @asebak