Enable kernel modules for binfmt-misc #36

digitalsanity · 2018-08-18T19:34:29Z

No description provided.

[ Upstream commit 2c5d5b1 ] syzbot loves to set very small mtu on devices, since it brings joy. We must make llc_ui_sendmsg() fool proof. usercopy: Kernel memory overwrite attempt detected to wrapped address (offset 0, size 18446612139802320068)! kernel BUG at mm/usercopy.c:100! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 17464 Comm: syz-executor1 Not tainted 4.17.0-rc3+ #36 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:usercopy_abort+0xbb/0xbd mm/usercopy.c:88 RSP: 0018:ffff8801868bf800 EFLAGS: 00010282 RAX: 000000000000006c RBX: ffffffff87d2fb00 RCX: 0000000000000000 RDX: 000000000000006c RSI: ffffffff81610731 RDI: ffffed0030d17ef6 RBP: ffff8801868bf858 R08: ffff88018daa4200 R09: ffffed003b5c4fb0 R10: ffffed003b5c4fb0 R11: ffff8801dae27d87 R12: ffffffff87d2f8e0 R13: ffffffff87d2f7a0 R14: ffffffff87d2f7a0 R15: ffffffff87d2f7a0 FS: 00007f56a14ac700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2bc21000 CR3: 00000001abeb1000 CR4: 00000000001426f0 DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000030602 Call Trace: check_bogus_address mm/usercopy.c:153 [inline] __check_object_size+0x5d9/0x5d9 mm/usercopy.c:256 check_object_size include/linux/thread_info.h:108 [inline] check_copy_size include/linux/thread_info.h:139 [inline] copy_from_iter_full include/linux/uio.h:121 [inline] memcpy_from_msg include/linux/skbuff.h:3305 [inline] llc_ui_sendmsg+0x4b1/0x1530 net/llc/af_llc.c:941 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:639 __sys_sendto+0x3d7/0x670 net/socket.c:1789 __do_sys_sendto net/socket.c:1801 [inline] __se_sys_sendto net/socket.c:1797 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x455979 RSP: 002b:00007f56a14abc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f56a14ac6d4 RCX: 0000000000455979 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000018 RBP: 000000000072bea0 R08: 00000000200012c0 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000548 R14: 00000000006fbf60 R15: 0000000000000000 Code: 55 c0 e8 c0 55 bb ff ff 75 c8 48 8b 55 c0 4d 89 f9 ff 75 d0 4d 89 e8 48 89 d9 4c 89 e6 41 56 48 c7 c7 80 fa d2 87 e8 a0 0b a3 ff <0f> 0b e8 95 55 bb ff e8 c0 a8 f7 ff 8b 95 14 ff ff ff 4d 89 e8 RIP: usercopy_abort+0xbb/0xbd mm/usercopy.c:88 RSP: ffff8801868bf800 Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Change-Id: I9f2c1b0d8d56a8d3da1774f51a4701212ac6ffff added IPGRE module to enable: (#18) ip tunnel add grx mode gre Change-Id: I26bda9ece68f9f6be1277da0779076694d5d845c ayufan: rockchip_linux_defconfig compile ZRAM as module Change-Id: I2ee48973cb370130cc5d75008a07d5777c69208a ayufan: rockchip_defconfig: disable CONFIG_SCHED_WALT as it makes system unstable Change-Id: Id2a150311fcaad9f11127320558dc3caafb250e4 config: add more USB wifi chipsets (#19) * Add some more USB wifi chipsets to default config. * Fix typo in default config. Added openvswitch kernel module compilation (#22) ayufan: defconfig: add RK805 pinctrl Change-Id: I9144206544db4e86e73a4d553fb8db3aa194c619 ayufan: enable additional realtek devices Change-Id: Ie3598c47154b648540f161ad4aedd597bc33f83f config: Add support for modules/features requested by issues #24 (AUTOFS4), rockchip-linux#54 (DRBD), rockchip-linux#64 (Multiple Routing Tables), rockchip-linux#87 (RTL8188EU), rockchip-linux#107 (iSCSI), rockchip-linux#148 (1-W GPIO) (#24) ayufan: rtl8812au: add Edimax 600 USB adapter Add requested kernel modules/features for issue rockchip-linux#153 and LIRC, PPS GPIO support, remove wifi staging drivers. (#25) Fix compile error (#26) Multiple definition error due to midgard and bifrost both selected ayufan: defconfig: add a bunch of kernel modules Change-Id: I77f5c4809c35b6c74a3bb668487eba93a0a15169 ayufan: rockchip_wlan: revert changes Change-Id: I6aa0bbc24e2fdfb6da350ed167d59c4eea836c2a ayufan: defconfig: enable CONFIG_MEMTEST Change-Id: I82c3d1b2d35fb10172f891571ef600a692ac4e61 ayufan: defconfig: remove unusued kernel configs Change-Id: I2a4a2e5785dd5796bb7404718898127718b86425 ayufan: defconfig: enable initrd in bzip2/lzma/lzo/lz4 Change-Id: I88ea1f8127d8fdadf90dd4428a51a1582adc2687 ayufan: defconfig: enable PWM FAN Change-Id: I87a364e95d937c354e06eb41fead43d8d5cb0b4a external: defconfig: Add support for f2fs and crc32 (#32) Add support for f2fs and it's dependency crc32 to rock64. This patch may or may not need to be included as well due to this bug https://bugs.debian.org/819725 A official patch was added by Debian https://salsa.debian.org/kernel-team/linux/blob/master/debian/patches/bugfix/all/fs-add-module_softdep-declarations-for-hard-coded-cr.patch external: defconfig: enable kernel modules for RBD and IPVS (#33) external: defconfig: Make crc, crc32, f2fs to be compiled into kernel. (#35) This changes crc, crc32, and f2fs to be compiled into the kernel instead of as module. This also fixes the issue of crc32-arm64 not being compiled due to a incorrect driver name. CONFIG_CRYPTO_CRC32_ARM64 became CONFIG_CRYPTO_CRC32_ARM64_CE in newer kernel sources. That's why I had to change that here. ayufan: defconfig: use CONFIG_HZ=250 Change-Id: I8009db93ee7c5af5e7804a004ab03d0ba97d20e2 CONFIG_SQUASHFS_XZ=y (#41) cyberp: defconfig: squashfs xz for snap support defconfig: enable binfmt-misc (#36) ayufan: defconfig: organize with savedefconfig ayufan: defconfig: support tehuti 10gbps adapter ayufan: defconfig: enable usb gadget via configfs ayufan: dts: compile-in audio codecs Change-Id: I7c70870395a10a0eafff006aabc17faf1d33355e

[ Upstream commit 2da34b7 ] [Why] IGT bypass test will set crc source as DPRX,and display DM didn`t check connection type, it run the test on the HDMI connector ,then the kernel will be crashed because aux->transfer is set null for HDMI connection. This patch will skip the invalid connection test and fix kernel crash issue. [How] Check the connector type while setting the pipe crc source as DPRX or auto,if the type is not DP or eDP, the crtc crc source will not be set and report error code to IGT test,IGT will show the this subtest as no valid crtc/connector combinations found. 116.779714] [IGT] amd_bypass: starting subtest 8bpc-bypass-mode [ 117.730996] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 117.731001] #PF: supervisor instruction fetch in kernel mode [ 117.731003] #PF: error_code(0x0010) - not-present page [ 117.731004] PGD 0 P4D 0 [ 117.731006] Oops: 0010 [#1] SMP NOPTI [ 117.731009] CPU: 11 PID: 2428 Comm: amd_bypass Tainted: G OE 5.11.0-34-generic ayufan-rock64#36~20.04.1-Ubuntu [ 117.731011] Hardware name: AMD CZN/, BIOS AB.FD 09/07/2021 [ 117.731012] RIP: 0010:0x0 [ 117.731015] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 117.731016] RSP: 0018:ffffa8d64225bab8 EFLAGS: 00010246 [ 117.731017] RAX: 0000000000000000 RBX: 0000000000000020 RCX: ffffa8d64225bb5e [ 117.731018] RDX: ffff93151d921880 RSI: ffffa8d64225bac8 RDI: ffff931511a1a9d8 [ 117.731022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 117.731023] CR2: ffffffffffffffd6 CR3: 000000010d5a4000 CR4: 0000000000750ee0 [ 117.731023] PKRU: 55555554 [ 117.731024] Call Trace: [ 117.731027] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper] [ 117.731036] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper] [ 117.731040] drm_dp_start_crc+0x38/0xb0 [drm_kms_helper] [ 117.731047] amdgpu_dm_crtc_set_crc_source+0x1ae/0x3e0 [amdgpu] [ 117.731149] crtc_crc_open+0x174/0x220 [drm] [ 117.731162] full_proxy_open+0x168/0x1f0 [ 117.731165] ? open_proxy_open+0x100/0x100 BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1546 Reviewed-by: Harry Wentland <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Perry Yuan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 1ff3635 ] In ata_tdev_add(), the return value of transport_add_device() is not checked. As a result, it causes null-ptr-deref while removing the module, because transport_remove_device() is called to remove the device that was not added. Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0 CPU: 13 PID: 13603 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ ayufan-rock64#36 pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x48/0x3a0 lr : device_del+0x44/0x3a0 Call trace: device_del+0x48/0x3a0 attribute_container_class_device_del+0x28/0x40 transport_remove_classdev+0x60/0x7c attribute_container_device_trigger+0x118/0x120 transport_remove_device+0x20/0x30 ata_tdev_delete+0x24/0x50 [libata] ata_tlink_delete+0x40/0xa0 [libata] ata_tport_delete+0x2c/0x60 [libata] ata_port_detach+0x148/0x1b0 [libata] ata_pci_remove_one+0x50/0x80 [libata] ahci_remove_one+0x4c/0x8c [ahci] Fix this by checking and handling return value of transport_add_device() in ata_tdev_add(). In the error path, device_del() is called to delete the device which was added earlier in this function, and ata_tdev_free() is called to free ata_dev. Fixes: d902747 ("[libata] Add ATA transport class") Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: Damien Le Moal <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit bcd7026 ] By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255). This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP Btmon log: Bluetooth monitor ver 5.64 = Note: Linux version 6.1.0-rc2 (x86_64) 0.264594 = Note: Bluetooth subsystem version 2.22 0.264636 @ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191 = New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604 @ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741 = Open Index: 00:00:00:00:00:00 [hci0] 13.900426 (...) > ACL Data RX: Handle 200 flags 0x00 dlen 1033 ayufan-rock64#32 [hci0] 14.273106 invalid packet size (12 != 1033) 08 00 01 00 02 01 04 00 01 10 ff ff ............ > ACL Data RX: Handle 200 flags 0x00 dlen 1547 ayufan-rock64#33 [hci0] 14.273561 invalid packet size (14 != 1547) 0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@..... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 ayufan-rock64#34 [hci0] 14.274390 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@....... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 ayufan-rock64#35 [hci0] 14.274932 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@....... = bluetoothd: Bluetooth daemon 5.43 14.401828 > ACL Data RX: Handle 200 flags 0x00 dlen 1033 ayufan-rock64#36 [hci0] 14.275753 invalid packet size (12 != 1033) 08 00 01 00 04 01 04 00 40 00 00 00 ........@... Signed-off-by: Sungwoo Kim <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 1ff3635 ] In ata_tdev_add(), the return value of transport_add_device() is not checked. As a result, it causes null-ptr-deref while removing the module, because transport_remove_device() is called to remove the device that was not added. Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0 CPU: 13 PID: 13603 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ ayufan-rock64#36 pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x48/0x3a0 lr : device_del+0x44/0x3a0 Call trace: device_del+0x48/0x3a0 attribute_container_class_device_del+0x28/0x40 transport_remove_classdev+0x60/0x7c attribute_container_device_trigger+0x118/0x120 transport_remove_device+0x20/0x30 ata_tdev_delete+0x24/0x50 [libata] ata_tlink_delete+0x40/0xa0 [libata] ata_tport_delete+0x2c/0x60 [libata] ata_port_detach+0x148/0x1b0 [libata] ata_pci_remove_one+0x50/0x80 [libata] ahci_remove_one+0x4c/0x8c [ahci] Fix this by checking and handling return value of transport_add_device() in ata_tdev_add(). In the error path, device_del() is called to delete the device which was added earlier in this function, and ata_tdev_free() is called to free ata_dev. Fixes: d902747 ("[libata] Add ATA transport class") Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: Damien Le Moal <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit bcd7026 ] By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255). This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP Btmon log: Bluetooth monitor ver 5.64 = Note: Linux version 6.1.0-rc2 (x86_64) 0.264594 = Note: Bluetooth subsystem version 2.22 0.264636 @ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191 = New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604 @ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741 = Open Index: 00:00:00:00:00:00 [hci0] 13.900426 (...) > ACL Data RX: Handle 200 flags 0x00 dlen 1033 ayufan-rock64#32 [hci0] 14.273106 invalid packet size (12 != 1033) 08 00 01 00 02 01 04 00 01 10 ff ff ............ > ACL Data RX: Handle 200 flags 0x00 dlen 1547 ayufan-rock64#33 [hci0] 14.273561 invalid packet size (14 != 1547) 0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@..... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 ayufan-rock64#34 [hci0] 14.274390 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@....... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 ayufan-rock64#35 [hci0] 14.274932 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@....... = bluetoothd: Bluetooth daemon 5.43 14.401828 > ACL Data RX: Handle 200 flags 0x00 dlen 1033 ayufan-rock64#36 [hci0] 14.275753 invalid packet size (12 != 1033) 08 00 01 00 04 01 04 00 40 00 00 00 ........@... Signed-off-by: Sungwoo Kim <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit bcd7026 ] By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255). This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP Btmon log: Bluetooth monitor ver 5.64 = Note: Linux version 6.1.0-rc2 (x86_64) 0.264594 = Note: Bluetooth subsystem version 2.22 0.264636 @ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191 = New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604 @ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741 = Open Index: 00:00:00:00:00:00 [hci0] 13.900426 (...) > ACL Data RX: Handle 200 flags 0x00 dlen 1033 ayufan-rock64#32 [hci0] 14.273106 invalid packet size (12 != 1033) 08 00 01 00 02 01 04 00 01 10 ff ff ............ > ACL Data RX: Handle 200 flags 0x00 dlen 1547 ayufan-rock64#33 [hci0] 14.273561 invalid packet size (14 != 1547) 0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@..... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 ayufan-rock64#34 [hci0] 14.274390 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@....... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 ayufan-rock64#35 [hci0] 14.274932 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@....... = bluetoothd: Bluetooth daemon 5.43 14.401828 > ACL Data RX: Handle 200 flags 0x00 dlen 1033 ayufan-rock64#36 [hci0] 14.275753 invalid packet size (12 != 1033) 08 00 01 00 04 01 04 00 40 00 00 00 ........@... Change-Id: Id3b87180787bdded28e876ed0500ca6156579fb8 Signed-off-by: Sungwoo Kim <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit f3fe681) Signed-off-by: Greg Kroah-Hartman <[email protected]>

To support kubernetes and bring more Networking feature， Need to open more Network supports. NETFILTER sets、MT_TCP、TLS、TCPacc、802.1d Fix issue : rockchip-linux#273 # Network packet filtering framework (Netfilter) CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m CONFIG_NETFILTER_XT_MATCH_CGROUP=m CONFIG_NETFILTER_XT_MATCH_IPCOMP=m CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m CONFIG_NF_LOG_NETDEV=m CONFIG_NF_CT_NETLINK_HELPER=m CONFIG_IP_SET_HASH_IPMARK=m CONFIG_IP_SET_HASH_IPMAC=m CONFIG_IP_SET_HASH_MAC=m CONFIG_IP_SET_HASH_NETPORTNET=m CONFIG_IP_SET_HASH_NETNET=m CONFIG_IP_VS_IPV6=y CONFIG_IP_VS_PROTO_TCP=y CONFIG_IP_VS_PROTO_UDP=y CONFIG_IP_VS_PROTO_ESP=y CONFIG_IP_VS_PROTO_AH=y CONFIG_IP_VS_PROTO_SCTP=y CONFIG_NF_LOG_ARP=m CONFIG_NFT_DUP_IPV6=m CONFIG_NFT_FIB_IPV6=m CONFIG_NF_FLOW_TABLE_IPV6=m CONFIG_NF_TABLES_BRIDGE=m CONFIG_NFT_BRIDGE_META=m CONFIG_NFT_BRIDGE_REJECT=m CONFIG_NF_LOG_BRIDGE=m # Packet: sockets monitoring interface CONFIG_PACKET_DIAG=m # Transport Layer Security support CONFIG_TLS=m CONFIG_TLS_DEVICE=y CONFIG_TLS_TOE=y # Transformation virtual interface CONFIG_XFRM_INTERFACE=m # UDP、RAW: socket monitoring interface CONFIG_INET_UDP_DIAG=m CONFIG_INET_RAW_DIAG=m # TCP: advanced congestion control CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=m CONFIG_TCP_CONG_NV=m CONFIG_TCP_CONG_SCALABLE=m CONFIG_TCP_CONG_LP=m CONFIG_TCP_CONG_VENO=m CONFIG_TCP_CONG_YEAH=m CONFIG_TCP_CONG_ILLINOIS=m CONFIG_TCP_CONG_DCTCP=m CONFIG_TCP_CONG_CDG=m CONFIG_TCP_CONG_BBR=m # MPTCP: Multipath TCP CONFIG_MPTCP=y # 802.1d Ethernet Bridging CONFIG_BRIDGE_VLAN_FILTERING=y

[ Upstream commit bcd7026 ] By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255). This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP Btmon log: Bluetooth monitor ver 5.64 = Note: Linux version 6.1.0-rc2 (x86_64) 0.264594 = Note: Bluetooth subsystem version 2.22 0.264636 @ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191 = New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604 @ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741 = Open Index: 00:00:00:00:00:00 [hci0] 13.900426 (...) > ACL Data RX: Handle 200 flags 0x00 dlen 1033 ayufan-rock64#32 [hci0] 14.273106 invalid packet size (12 != 1033) 08 00 01 00 02 01 04 00 01 10 ff ff ............ > ACL Data RX: Handle 200 flags 0x00 dlen 1547 ayufan-rock64#33 [hci0] 14.273561 invalid packet size (14 != 1547) 0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@..... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 ayufan-rock64#34 [hci0] 14.274390 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@....... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 ayufan-rock64#35 [hci0] 14.274932 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@....... = bluetoothd: Bluetooth daemon 5.43 14.401828 > ACL Data RX: Handle 200 flags 0x00 dlen 1033 ayufan-rock64#36 [hci0] 14.275753 invalid packet size (12 != 1033) 08 00 01 00 04 01 04 00 40 00 00 00 ........@... Signed-off-by: Sungwoo Kim <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 5fd9e45 upstream. 829 if (request->complete) { 830 spin_unlock(&priv_dev->lock); 831 usb_gadget_giveback_request(&priv_ep->endpoint, 832 request); 833 spin_lock(&priv_dev->lock); 834 } 835 836 if (request->buf == priv_dev->zlp_buf) 837 cdns3_gadget_ep_free_request(&priv_ep->endpoint, request); Driver append an additional zero packet request when queue a packet, which length mod max packet size is 0. When transfer complete, run to line 831, usb_gadget_giveback_request() will free this requestion. 836 condition is true, so cdns3_gadget_ep_free_request() free this request again. Log: [ 1920.140696][ T150] BUG: KFENCE: use-after-free read in cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.140696][ T150] [ 1920.151837][ T150] Use-after-free read at 0x000000003d1cd10b (in kfence-ayufan-rock64#36): [ 1920.159082][ T150] cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.164988][ T150] cdns3_transfer_completed+0x438/0x5f8 [cdns3] Add check at line 829, skip call usb_gadget_giveback_request() if it is additional zero length packet request. Needn't call usb_gadget_giveback_request() because it is allocated in this driver. Cc: [email protected] Fixes: 7733f6c ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <[email protected]> Reviewed-by: Roger Quadros <[email protected]> Acked-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit adf0398 ] There is a race condition between l2cap_chan_timeout() and l2cap_chan_del(). When we use l2cap_chan_del() to delete the channel, the chan->conn will be set to null. But the conn could be dereferenced again in the mutex_lock() of l2cap_chan_timeout(). As a result the null pointer dereference bug will happen. The KASAN report triggered by POC is shown below: [ 472.074580] ================================================================== [ 472.075284] BUG: KASAN: null-ptr-deref in mutex_lock+0x68/0xc0 [ 472.075308] Write of size 8 at addr 0000000000000158 by task kworker/0:0/7 [ 472.075308] [ 472.075308] CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.9.0-rc5-00356-g78c0094a146b ayufan-rock64#36 [ 472.075308] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.075308] Workqueue: events l2cap_chan_timeout [ 472.075308] Call Trace: [ 472.075308] <TASK> [ 472.075308] dump_stack_lvl+0x137/0x1a0 [ 472.075308] print_report+0x101/0x250 [ 472.075308] ? __virt_addr_valid+0x77/0x160 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_report+0x139/0x170 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_check_range+0x2c3/0x2e0 [ 472.075308] mutex_lock+0x68/0xc0 [ 472.075308] l2cap_chan_timeout+0x181/0x300 [ 472.075308] process_one_work+0x5d2/0xe00 [ 472.075308] worker_thread+0xe1d/0x1660 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] kthread+0x2b7/0x350 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork+0x4d/0x80 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork_asm+0x11/0x20 [ 472.075308] </TASK> [ 472.075308] ================================================================== [ 472.094860] Disabling lock debugging due to kernel taint [ 472.096136] BUG: kernel NULL pointer dereference, address: 0000000000000158 [ 472.096136] #PF: supervisor write access in kernel mode [ 472.096136] #PF: error_code(0x0002) - not-present page [ 472.096136] PGD 0 P4D 0 [ 472.096136] Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI [ 472.096136] CPU: 0 PID: 7 Comm: kworker/0:0 Tainted: G B 6.9.0-rc5-00356-g78c0094a146b ayufan-rock64#36 [ 472.096136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.096136] Workqueue: events l2cap_chan_timeout [ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0 [ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88 [ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246 [ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865 [ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78 [ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f [ 472.096136] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000 [ 472.096136] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00 [ 472.096136] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000 [ 472.096136] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 472.096136] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0 [ 472.096136] Call Trace: [ 472.096136] <TASK> [ 472.096136] ? __die_body+0x8d/0xe0 [ 472.096136] ? page_fault_oops+0x6b8/0x9a0 [ 472.096136] ? kernelmode_fixup_or_oops+0x20c/0x2a0 [ 472.096136] ? do_user_addr_fault+0x1027/0x1340 [ 472.096136] ? _printk+0x7a/0xa0 [ 472.096136] ? mutex_lock+0x68/0xc0 [ 472.096136] ? add_taint+0x42/0xd0 [ 472.096136] ? exc_page_fault+0x6a/0x1b0 [ 472.096136] ? asm_exc_page_fault+0x26/0x30 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] ? mutex_lock+0x88/0xc0 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] l2cap_chan_timeout+0x181/0x300 [ 472.096136] process_one_work+0x5d2/0xe00 [ 472.096136] worker_thread+0xe1d/0x1660 [ 472.096136] ? pr_cont_work+0x5e0/0x5e0 [ 472.096136] kthread+0x2b7/0x350 [ 472.096136] ? pr_cont_work+0x5e0/0x5e0 [ 472.096136] ? kthread_blkcg+0xd0/0xd0 [ 472.096136] ret_from_fork+0x4d/0x80 [ 472.096136] ? kthread_blkcg+0xd0/0xd0 [ 472.096136] ret_from_fork_asm+0x11/0x20 [ 472.096136] </TASK> [ 472.096136] Modules linked in: [ 472.096136] CR2: 0000000000000158 [ 472.096136] ---[ end trace 0000000000000000 ]--- [ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0 [ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88 [ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246 [ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865 [ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78 [ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f [ 472.132932] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000 [ 472.132932] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00 [ 472.132932] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000 [ 472.132932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 472.132932] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0 [ 472.132932] Kernel panic - not syncing: Fatal exception [ 472.132932] Kernel Offset: disabled [ 472.132932] ---[ end Kernel panic - not syncing: Fatal exception ]--- Add a check to judge whether the conn is null in l2cap_chan_timeout() in order to mitigate the bug. Fixes: 3df91ea ("Bluetooth: Revert to mutexes from RCU list") Signed-off-by: Duoming Zhou <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 5fd9e45 upstream. 829 if (request->complete) { 830 spin_unlock(&priv_dev->lock); 831 usb_gadget_giveback_request(&priv_ep->endpoint, 832 request); 833 spin_lock(&priv_dev->lock); 834 } 835 836 if (request->buf == priv_dev->zlp_buf) 837 cdns3_gadget_ep_free_request(&priv_ep->endpoint, request); Driver append an additional zero packet request when queue a packet, which length mod max packet size is 0. When transfer complete, run to line 831, usb_gadget_giveback_request() will free this requestion. 836 condition is true, so cdns3_gadget_ep_free_request() free this request again. Log: [ 1920.140696][ T150] BUG: KFENCE: use-after-free read in cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.140696][ T150] [ 1920.151837][ T150] Use-after-free read at 0x000000003d1cd10b (in kfence-ayufan-rock64#36): [ 1920.159082][ T150] cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.164988][ T150] cdns3_transfer_completed+0x438/0x5f8 [cdns3] Add check at line 829, skip call usb_gadget_giveback_request() if it is additional zero length packet request. Needn't call usb_gadget_giveback_request() because it is allocated in this driver. Cc: [email protected] Fixes: 7733f6c ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <[email protected]> Reviewed-by: Roger Quadros <[email protected]> Acked-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit adf0398 ] There is a race condition between l2cap_chan_timeout() and l2cap_chan_del(). When we use l2cap_chan_del() to delete the channel, the chan->conn will be set to null. But the conn could be dereferenced again in the mutex_lock() of l2cap_chan_timeout(). As a result the null pointer dereference bug will happen. The KASAN report triggered by POC is shown below: [ 472.074580] ================================================================== [ 472.075284] BUG: KASAN: null-ptr-deref in mutex_lock+0x68/0xc0 [ 472.075308] Write of size 8 at addr 0000000000000158 by task kworker/0:0/7 [ 472.075308] [ 472.075308] CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.9.0-rc5-00356-g78c0094a146b ayufan-rock64#36 [ 472.075308] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.075308] Workqueue: events l2cap_chan_timeout [ 472.075308] Call Trace: [ 472.075308] <TASK> [ 472.075308] dump_stack_lvl+0x137/0x1a0 [ 472.075308] print_report+0x101/0x250 [ 472.075308] ? __virt_addr_valid+0x77/0x160 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_report+0x139/0x170 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_check_range+0x2c3/0x2e0 [ 472.075308] mutex_lock+0x68/0xc0 [ 472.075308] l2cap_chan_timeout+0x181/0x300 [ 472.075308] process_one_work+0x5d2/0xe00 [ 472.075308] worker_thread+0xe1d/0x1660 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] kthread+0x2b7/0x350 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork+0x4d/0x80 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork_asm+0x11/0x20 [ 472.075308] </TASK> [ 472.075308] ================================================================== [ 472.094860] Disabling lock debugging due to kernel taint [ 472.096136] BUG: kernel NULL pointer dereference, address: 0000000000000158 [ 472.096136] #PF: supervisor write access in kernel mode [ 472.096136] #PF: error_code(0x0002) - not-present page [ 472.096136] PGD 0 P4D 0 [ 472.096136] Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI [ 472.096136] CPU: 0 PID: 7 Comm: kworker/0:0 Tainted: G B 6.9.0-rc5-00356-g78c0094a146b ayufan-rock64#36 [ 472.096136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.096136] Workqueue: events l2cap_chan_timeout [ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0 [ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88 [ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246 [ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865 [ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78 [ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f [ 472.096136] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000 [ 472.096136] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00 [ 472.096136] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000 [ 472.096136] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 472.096136] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0 [ 472.096136] Call Trace: [ 472.096136] <TASK> [ 472.096136] ? __die_body+0x8d/0xe0 [ 472.096136] ? page_fault_oops+0x6b8/0x9a0 [ 472.096136] ? kernelmode_fixup_or_oops+0x20c/0x2a0 [ 472.096136] ? do_user_addr_fault+0x1027/0x1340 [ 472.096136] ? _printk+0x7a/0xa0 [ 472.096136] ? mutex_lock+0x68/0xc0 [ 472.096136] ? add_taint+0x42/0xd0 [ 472.096136] ? exc_page_fault+0x6a/0x1b0 [ 472.096136] ? asm_exc_page_fault+0x26/0x30 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] ? mutex_lock+0x88/0xc0 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] l2cap_chan_timeout+0x181/0x300 [ 472.096136] process_one_work+0x5d2/0xe00 [ 472.096136] worker_thread+0xe1d/0x1660 [ 472.096136] ? pr_cont_work+0x5e0/0x5e0 [ 472.096136] kthread+0x2b7/0x350 [ 472.096136] ? pr_cont_work+0x5e0/0x5e0 [ 472.096136] ? kthread_blkcg+0xd0/0xd0 [ 472.096136] ret_from_fork+0x4d/0x80 [ 472.096136] ? kthread_blkcg+0xd0/0xd0 [ 472.096136] ret_from_fork_asm+0x11/0x20 [ 472.096136] </TASK> [ 472.096136] Modules linked in: [ 472.096136] CR2: 0000000000000158 [ 472.096136] ---[ end trace 0000000000000000 ]--- [ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0 [ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88 [ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246 [ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865 [ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78 [ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f [ 472.132932] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000 [ 472.132932] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00 [ 472.132932] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000 [ 472.132932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 472.132932] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0 [ 472.132932] Kernel panic - not syncing: Fatal exception [ 472.132932] Kernel Offset: disabled [ 472.132932] ---[ end Kernel panic - not syncing: Fatal exception ]--- Add a check to judge whether the conn is null in l2cap_chan_timeout() in order to mitigate the bug. Fixes: 3df91ea ("Bluetooth: Revert to mutexes from RCU list") Signed-off-by: Duoming Zhou <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 5fd9e45 upstream. 829 if (request->complete) { 830 spin_unlock(&priv_dev->lock); 831 usb_gadget_giveback_request(&priv_ep->endpoint, 832 request); 833 spin_lock(&priv_dev->lock); 834 } 835 836 if (request->buf == priv_dev->zlp_buf) 837 cdns3_gadget_ep_free_request(&priv_ep->endpoint, request); Driver append an additional zero packet request when queue a packet, which length mod max packet size is 0. When transfer complete, run to line 831, usb_gadget_giveback_request() will free this requestion. 836 condition is true, so cdns3_gadget_ep_free_request() free this request again. Log: [ 1920.140696][ T150] BUG: KFENCE: use-after-free read in cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.140696][ T150] [ 1920.151837][ T150] Use-after-free read at 0x000000003d1cd10b (in kfence-ayufan-rock64#36): [ 1920.159082][ T150] cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.164988][ T150] cdns3_transfer_completed+0x438/0x5f8 [cdns3] Add check at line 829, skip call usb_gadget_giveback_request() if it is additional zero length packet request. Needn't call usb_gadget_giveback_request() because it is allocated in this driver. Cc: [email protected] Fixes: 7733f6c ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <[email protected]> Reviewed-by: Roger Quadros <[email protected]> Acked-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit adf0398 ] There is a race condition between l2cap_chan_timeout() and l2cap_chan_del(). When we use l2cap_chan_del() to delete the channel, the chan->conn will be set to null. But the conn could be dereferenced again in the mutex_lock() of l2cap_chan_timeout(). As a result the null pointer dereference bug will happen. The KASAN report triggered by POC is shown below: [ 472.074580] ================================================================== [ 472.075284] BUG: KASAN: null-ptr-deref in mutex_lock+0x68/0xc0 [ 472.075308] Write of size 8 at addr 0000000000000158 by task kworker/0:0/7 [ 472.075308] [ 472.075308] CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.9.0-rc5-00356-g78c0094a146b ayufan-rock64#36 [ 472.075308] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.075308] Workqueue: events l2cap_chan_timeout [ 472.075308] Call Trace: [ 472.075308] <TASK> [ 472.075308] dump_stack_lvl+0x137/0x1a0 [ 472.075308] print_report+0x101/0x250 [ 472.075308] ? __virt_addr_valid+0x77/0x160 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_report+0x139/0x170 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_check_range+0x2c3/0x2e0 [ 472.075308] mutex_lock+0x68/0xc0 [ 472.075308] l2cap_chan_timeout+0x181/0x300 [ 472.075308] process_one_work+0x5d2/0xe00 [ 472.075308] worker_thread+0xe1d/0x1660 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] kthread+0x2b7/0x350 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork+0x4d/0x80 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork_asm+0x11/0x20 [ 472.075308] </TASK> [ 472.075308] ================================================================== [ 472.094860] Disabling lock debugging due to kernel taint [ 472.096136] BUG: kernel NULL pointer dereference, address: 0000000000000158 [ 472.096136] #PF: supervisor write access in kernel mode [ 472.096136] #PF: error_code(0x0002) - not-present page [ 472.096136] PGD 0 P4D 0 [ 472.096136] Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI [ 472.096136] CPU: 0 PID: 7 Comm: kworker/0:0 Tainted: G B 6.9.0-rc5-00356-g78c0094a146b ayufan-rock64#36 [ 472.096136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.096136] Workqueue: events l2cap_chan_timeout [ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0 [ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88 [ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246 [ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865 [ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78 [ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f [ 472.096136] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000 [ 472.096136] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00 [ 472.096136] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000 [ 472.096136] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 472.096136] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0 [ 472.096136] Call Trace: [ 472.096136] <TASK> [ 472.096136] ? __die_body+0x8d/0xe0 [ 472.096136] ? page_fault_oops+0x6b8/0x9a0 [ 472.096136] ? kernelmode_fixup_or_oops+0x20c/0x2a0 [ 472.096136] ? do_user_addr_fault+0x1027/0x1340 [ 472.096136] ? _printk+0x7a/0xa0 [ 472.096136] ? mutex_lock+0x68/0xc0 [ 472.096136] ? add_taint+0x42/0xd0 [ 472.096136] ? exc_page_fault+0x6a/0x1b0 [ 472.096136] ? asm_exc_page_fault+0x26/0x30 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] ? mutex_lock+0x88/0xc0 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] l2cap_chan_timeout+0x181/0x300 [ 472.096136] process_one_work+0x5d2/0xe00 [ 472.096136] worker_thread+0xe1d/0x1660 [ 472.096136] ? pr_cont_work+0x5e0/0x5e0 [ 472.096136] kthread+0x2b7/0x350 [ 472.096136] ? pr_cont_work+0x5e0/0x5e0 [ 472.096136] ? kthread_blkcg+0xd0/0xd0 [ 472.096136] ret_from_fork+0x4d/0x80 [ 472.096136] ? kthread_blkcg+0xd0/0xd0 [ 472.096136] ret_from_fork_asm+0x11/0x20 [ 472.096136] </TASK> [ 472.096136] Modules linked in: [ 472.096136] CR2: 0000000000000158 [ 472.096136] ---[ end trace 0000000000000000 ]--- [ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0 [ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88 [ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246 [ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865 [ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78 [ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f [ 472.132932] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000 [ 472.132932] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00 [ 472.132932] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000 [ 472.132932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 472.132932] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0 [ 472.132932] Kernel panic - not syncing: Fatal exception [ 472.132932] Kernel Offset: disabled [ 472.132932] ---[ end Kernel panic - not syncing: Fatal exception ]--- Add a check to judge whether the conn is null in l2cap_chan_timeout() in order to mitigate the bug. Fixes: 3df91ea ("Bluetooth: Revert to mutexes from RCU list") Signed-off-by: Duoming Zhou <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Enable kernel modules for binfmt-misc

a2a86c1

ayufan merged commit 963067e into ayufan-rock64:release-4.4 Sep 29, 2018

ayufan pushed a commit that referenced this pull request Sep 29, 2018

defconfig: enable binfmt-misc (#36)

5616be7

ayufan pushed a commit that referenced this pull request Dec 11, 2018

defconfig: enable binfmt-misc (#36)

53bf802

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Enable kernel modules for binfmt-misc #36

Enable kernel modules for binfmt-misc #36

digitalsanity commented Aug 18, 2018

Enable kernel modules for binfmt-misc #36

Enable kernel modules for binfmt-misc #36

Conversation

digitalsanity commented Aug 18, 2018