Skip to content

Commit

Permalink
Update CMakeLists.txt
Browse files Browse the repository at this point in the history
  • Loading branch information
@awawa-dev
awawa-dev committed Dec 4, 2023
1 parent 09f1180 commit a34f6b3
Showing 1 changed file with 48 additions and 39 deletions.
87 changes: 48 additions & 39 deletions CMakeLists.txt
View file
Original file line number Diff line number Diff line change
@@ -1,27 +1,29 @@
# User configuration section starts here
if (NOT PICO_PROGRAM_MAIN_ENTRY)
# User configuration for HyperSerialPico section starts here

# Some boards, such as the first Adafruit revisions, may have trouble booting properly
# due to bad componets used in the design.
# Turn this setting to ON if your rp2040 is not detected after firmware upload and reset
set(BOOT_WORKAROUND OFF)
# Some boards, such as the first Adafruit revisions, may have trouble booting properly
# due to bad componets used in the design.
# Turn this setting to ON if your rp2040 is not detected after firmware upload and reset
set(BOOT_WORKAROUND OFF)

# Default output data pin for the non-SPI LED strips (only for sk6812/ws2812b)
set(OUTPUT_DATA_PIN 2)
# Default output data pin for the non-SPI LED strips (only for sk6812/ws2812b)
set(OUTPUT_DATA_PIN 2)

# Default output data/clocks pin for the SPI LED strips (only for apa102, not for sk6812/ws2812b)
# only certain pairs of pins are allowed for selected SPI interface (refer to "readme.md")
set(OUTPUT_SPI_DATA_PIN 3)
set(OUTPUT_SPI_CLOCK_PIN 2)
set(OUTPUT_SPI_INTERFACE spi0)
# Default output data/clocks pin for the SPI LED strips (only for apa102, not for sk6812/ws2812b)
# only certain pairs of pins are allowed for selected SPI interface (refer to "readme.md")
set(OUTPUT_SPI_DATA_PIN 3)
set(OUTPUT_SPI_CLOCK_PIN 2)
set(OUTPUT_SPI_INTERFACE spi0)

# Use multi-segment, starting index of second led strip or OFF to disable
set(SECOND_SEGMENT_INDEX OFF)
# Use multi-segment, starting index of second led strip or OFF to disable
set(SECOND_SEGMENT_INDEX OFF)

# If multi-segment is used and it's reversed, set this option to ON to enable reversing
set(SECOND_SEGMENT_REVERSED OFF)
# If multi-segment is used and it's reversed, set this option to ON to enable reversing
set(SECOND_SEGMENT_REVERSED OFF)

# User configuration section ends here
# Usually you don't need to change anything below this section
# User configuration section ends here
# Usually you don't need to change anything below this section
endif()

cmake_minimum_required(VERSION 3.13)

Expand All @@ -30,13 +32,14 @@ add_definitions ( -DPICO_STDIO_USB_ENABLE_RESET_VIA_VENDOR_INTERFACE=0 )

# initialize the SDK based on PICO_SDK_PATH
# note: this must happen before project()
set(PICO_SDK_PATH ${CMAKE_SOURCE_DIR}/sdk/pico)
set(FREERTOS_KERNEL_PATH ${CMAKE_SOURCE_DIR}/sdk/freertos)
set(PICO_SDK_PATH ${CMAKE_CURRENT_SOURCE_DIR}/sdk/pico)
set(FREERTOS_KERNEL_PATH ${CMAKE_CURRENT_SOURCE_DIR}/sdk/freertos)

include(${PICO_SDK_PATH}/external/pico_sdk_import.cmake)
include(${FREERTOS_KERNEL_PATH}/portable/ThirdParty/GCC/RP2040/FreeRTOS_Kernel_import.cmake)

project(HyperSerialPico C CXX ASM)
project("HyperSerialPico" C CXX ASM)

set(CMAKE_C_STANDARD 11)
set(CMAKE_CXX_STANDARD 17)

Expand All @@ -52,9 +55,9 @@ pico_sdk_init()

# generic HyperSerialPico settings
set(HyperSerialPicoCompanionLibs FreeRTOS-Kernel FreeRTOS-Kernel-Heap1 pico_stdlib pico_multicore hardware_pio hardware_dma hardware_spi)
set(HyperSerialPicoCompanionIncludes ${CMAKE_SOURCE_DIR}/include ${CMAKE_SOURCE_DIR}/sdk/config)
file(MAKE_DIRECTORY ${CMAKE_SOURCE_DIR}/generated)
file(MAKE_DIRECTORY ${CMAKE_SOURCE_DIR}/firmware)
set(HyperSerialPicoCompanionIncludes ${CMAKE_CURRENT_SOURCE_DIR}/include ${CMAKE_CURRENT_SOURCE_DIR}/sdk/config)
file(MAKE_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/generated)
file(MAKE_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/firmware)

if(NOT CMAKE_HOST_WIN32)
string(ASCII 27 EscChar)
Expand Down Expand Up @@ -99,7 +102,11 @@ message( STATUS "---------------------------")
add_compile_options(-ftrack-macro-expansion=0 -fno-diagnostics-show-caret -fdiagnostics-color=auto)

macro(HyperSerialPicoTarget HyperSerialPicoTargetName)
add_executable(${HyperSerialPicoTargetName} ${CMAKE_SOURCE_DIR}/source/main.cpp)
if (PICO_PROGRAM_MAIN_ENTRY)
add_executable(${HyperSerialPicoTargetName} ${PICO_PROGRAM_MAIN_ENTRY})
else()
add_executable(${HyperSerialPicoTargetName} ${CMAKE_CURRENT_SOURCE_DIR}/source/main.cpp)
endif()
if (BOOT_WORKAROUND)
target_compile_definitions(${HyperSerialPicoTargetName} PUBLIC -DBOOT_WORKAROUND -DPICO_XOSC_STARTUP_DELAY_MULTIPLIER=64)
endif()
Expand All @@ -108,35 +115,37 @@ macro(HyperSerialPicoTarget HyperSerialPicoTargetName)
pico_add_extra_outputs(${HyperSerialPicoTargetName})
pico_enable_stdio_usb(${HyperSerialPicoTargetName} 1)
pico_enable_stdio_uart(${HyperSerialPicoTargetName} 0)
pico_generate_pio_header(${HyperSerialPicoTargetName} ${CMAKE_SOURCE_DIR}/pio/neopixel.pio OUTPUT_DIR ${CMAKE_SOURCE_DIR}/generated)
pico_generate_pio_header(${HyperSerialPicoTargetName} ${CMAKE_SOURCE_DIR}/pio/neopixel_ws2812b.pio OUTPUT_DIR ${CMAKE_SOURCE_DIR}/generated)
add_custom_command(TARGET ${HyperSerialPicoTargetName} POST_BUILD COMMAND ${CMAKE_COMMAND} -E copy ${CMAKE_BINARY_DIR}/${HyperSerialPicoTargetName}.uf2 ${CMAKE_SOURCE_DIR}/firmware)
pico_generate_pio_header(${HyperSerialPicoTargetName} ${CMAKE_CURRENT_SOURCE_DIR}/pio/neopixel.pio OUTPUT_DIR ${CMAKE_CURRENT_SOURCE_DIR}/generated)
pico_generate_pio_header(${HyperSerialPicoTargetName} ${CMAKE_CURRENT_SOURCE_DIR}/pio/neopixel_ws2812b.pio OUTPUT_DIR ${CMAKE_CURRENT_SOURCE_DIR}/generated)
add_custom_command(TARGET ${HyperSerialPicoTargetName} POST_BUILD COMMAND ${CMAKE_COMMAND} -E copy ${CMAKE_CURRENT_BINARY_DIR}/${HyperSerialPicoTargetName}.uf2 ${CMAKE_CURRENT_SOURCE_DIR}/firmware)
endmacro()

# targets for different LED strips
IF(NOT SECOND_SEGMENT_INDEX)
HyperSerialPicoTarget("${CMAKE_PROJECT_NAME}_Spi")
target_compile_definitions("${CMAKE_PROJECT_NAME}_Spi" PRIVATE -DSPILED_APA102 -DSPI_INTERFACE=${OUTPUT_SPI_INTERFACE} -DDATA_PIN=${OUTPUT_SPI_DATA_PIN} -DCLOCK_PIN=${OUTPUT_SPI_CLOCK_PIN})
IF(NOT DISABLE_SPI_LEDS)
HyperSerialPicoTarget("${CMAKE_PROJECT_NAME}_Spi")
target_compile_definitions("${CMAKE_PROJECT_NAME}_Spi" PRIVATE -DSPILED_APA102 -DSPI_INTERFACE=${OUTPUT_SPI_INTERFACE} -DDATA_PIN=${OUTPUT_SPI_DATA_PIN} -DCLOCK_PIN=${OUTPUT_SPI_CLOCK_PIN})
endif()
HyperSerialPicoTarget("${CMAKE_PROJECT_NAME}_sk6812Cold")
target_compile_definitions("${CMAKE_PROJECT_NAME}_sk6812Cold" PRIVATE -DNEOPIXEL_RGBW -DCOLD_WHITE -DDATA_PIN=${OUTPUT_DATA_PIN})
target_compile_definitions("${CMAKE_PROJECT_NAME}_sk6812Cold" PRIVATE -DNEOPIXEL_RGBW -DCOLD_WHITE -DDATA_PIN=${OUTPUT_DATA_PIN}) -DSPI_INTERFACE=${OUTPUT_SPI_INTERFACE} -DCLOCK_PIN=${OUTPUT_SPI_CLOCK_PIN}
HyperSerialPicoTarget("${CMAKE_PROJECT_NAME}_sk6812Neutral")
target_compile_definitions("${CMAKE_PROJECT_NAME}_sk6812Neutral" PRIVATE -DNEOPIXEL_RGBW -DDATA_PIN=${OUTPUT_DATA_PIN})
target_compile_definitions("${CMAKE_PROJECT_NAME}_sk6812Neutral" PRIVATE -DNEOPIXEL_RGBW -DDATA_PIN=${OUTPUT_DATA_PIN}) -DSPI_INTERFACE=${OUTPUT_SPI_INTERFACE} -DCLOCK_PIN=${OUTPUT_SPI_CLOCK_PIN}
HyperSerialPicoTarget("${CMAKE_PROJECT_NAME}_ws2812")
target_compile_definitions("${CMAKE_PROJECT_NAME}_ws2812" PRIVATE -DNEOPIXEL_RGB -DDATA_PIN=${OUTPUT_DATA_PIN})
target_compile_definitions("${CMAKE_PROJECT_NAME}_ws2812" PRIVATE -DNEOPIXEL_RGB -DDATA_PIN=${OUTPUT_DATA_PIN}) -DSPI_INTERFACE=${OUTPUT_SPI_INTERFACE} -DCLOCK_PIN=${OUTPUT_SPI_CLOCK_PIN}
ELSE()
IF(NOT SECOND_SEGMENT_REVERSED)
HyperSerialPicoTarget("${CMAKE_PROJECT_NAME}_sk6812Cold_multisegment_at_${SECOND_SEGMENT_INDEX}")
target_compile_definitions("${CMAKE_PROJECT_NAME}_sk6812Cold_multisegment_at_${SECOND_SEGMENT_INDEX}" PRIVATE -DNEOPIXEL_RGBW -DCOLD_WHITE -DDATA_PIN=${OUTPUT_DATA_PIN} -DSECOND_SEGMENT_START_INDEX=${SECOND_SEGMENT_INDEX})
target_compile_definitions("${CMAKE_PROJECT_NAME}_sk6812Cold_multisegment_at_${SECOND_SEGMENT_INDEX}" PRIVATE -DNEOPIXEL_RGBW -DCOLD_WHITE -DDATA_PIN=${OUTPUT_DATA_PIN} -DSPI_INTERFACE=${OUTPUT_SPI_INTERFACE} -DCLOCK_PIN=${OUTPUT_SPI_CLOCK_PIN} -DSECOND_SEGMENT_START_INDEX=${SECOND_SEGMENT_INDEX})
HyperSerialPicoTarget("${CMAKE_PROJECT_NAME}_sk6812Neutral_multisegment_at_${SECOND_SEGMENT_INDEX}")
target_compile_definitions("${CMAKE_PROJECT_NAME}_sk6812Neutral_multisegment_at_${SECOND_SEGMENT_INDEX}" PRIVATE -DNEOPIXEL_RGBW -DDATA_PIN=${OUTPUT_DATA_PIN} -DSECOND_SEGMENT_START_INDEX=${SECOND_SEGMENT_INDEX})
target_compile_definitions("${CMAKE_PROJECT_NAME}_sk6812Neutral_multisegment_at_${SECOND_SEGMENT_INDEX}" PRIVATE -DNEOPIXEL_RGBW -DDATA_PIN=${OUTPUT_DATA_PIN} -DSPI_INTERFACE=${OUTPUT_SPI_INTERFACE} -DCLOCK_PIN=${OUTPUT_SPI_CLOCK_PIN} -DSECOND_SEGMENT_START_INDEX=${SECOND_SEGMENT_INDEX})
HyperSerialPicoTarget("${CMAKE_PROJECT_NAME}_ws2812_multisegment_at_${SECOND_SEGMENT_INDEX}")
target_compile_definitions("${CMAKE_PROJECT_NAME}_ws2812_multisegment_at_${SECOND_SEGMENT_INDEX}" PRIVATE -DNEOPIXEL_RGB -DDATA_PIN=${OUTPUT_DATA_PIN} -DSECOND_SEGMENT_START_INDEX=${SECOND_SEGMENT_INDEX})
target_compile_definitions("${CMAKE_PROJECT_NAME}_ws2812_multisegment_at_${SECOND_SEGMENT_INDEX}" PRIVATE -DNEOPIXEL_RGB -DDATA_PIN=${OUTPUT_DATA_PIN} -DSPI_INTERFACE=${OUTPUT_SPI_INTERFACE} -DCLOCK_PIN=${OUTPUT_SPI_CLOCK_PIN} -DSECOND_SEGMENT_START_INDEX=${SECOND_SEGMENT_INDEX})
ELSE()
HyperSerialPicoTarget("${CMAKE_PROJECT_NAME}_sk6812Cold_rev_multisegment_at_${SECOND_SEGMENT_INDEX}")
target_compile_definitions("${CMAKE_PROJECT_NAME}_sk6812Cold_rev_multisegment_at_${SECOND_SEGMENT_INDEX}" PRIVATE -DNEOPIXEL_RGBW -DCOLD_WHITE -DDATA_PIN=${OUTPUT_DATA_PIN} -DSECOND_SEGMENT_START_INDEX=${SECOND_SEGMENT_INDEX} -DSECOND_SEGMENT_REVERSED)
target_compile_definitions("${CMAKE_PROJECT_NAME}_sk6812Cold_rev_multisegment_at_${SECOND_SEGMENT_INDEX}" PRIVATE -DNEOPIXEL_RGBW -DCOLD_WHITE -DDATA_PIN=${OUTPUT_DATA_PIN} -DSPI_INTERFACE=${OUTPUT_SPI_INTERFACE} -DCLOCK_PIN=${OUTPUT_SPI_CLOCK_PIN} -DSECOND_SEGMENT_START_INDEX=${SECOND_SEGMENT_INDEX} -DSECOND_SEGMENT_REVERSED)
HyperSerialPicoTarget("${CMAKE_PROJECT_NAME}_sk6812Neutral_rev_multisegment_at_${SECOND_SEGMENT_INDEX}")
target_compile_definitions("${CMAKE_PROJECT_NAME}_sk6812Neutral_rev_multisegment_at_${SECOND_SEGMENT_INDEX}" PRIVATE -DNEOPIXEL_RGBW -DDATA_PIN=${OUTPUT_DATA_PIN} -DSECOND_SEGMENT_START_INDEX=${SECOND_SEGMENT_INDEX} -DSECOND_SEGMENT_REVERSED)
target_compile_definitions("${CMAKE_PROJECT_NAME}_sk6812Neutral_rev_multisegment_at_${SECOND_SEGMENT_INDEX}" PRIVATE -DNEOPIXEL_RGBW -DDATA_PIN=${OUTPUT_DATA_PIN} -DSPI_INTERFACE=${OUTPUT_SPI_INTERFACE} -DCLOCK_PIN=${OUTPUT_SPI_CLOCK_PIN} -DSECOND_SEGMENT_START_INDEX=${SECOND_SEGMENT_INDEX} -DSECOND_SEGMENT_REVERSED)
HyperSerialPicoTarget("${CMAKE_PROJECT_NAME}_ws2812_rev_multisegment_at_${SECOND_SEGMENT_INDEX}")
target_compile_definitions("${CMAKE_PROJECT_NAME}_ws2812_rev_multisegment_at_${SECOND_SEGMENT_INDEX}" PRIVATE -DNEOPIXEL_RGB -DDATA_PIN=${OUTPUT_DATA_PIN} -DSECOND_SEGMENT_START_INDEX=${SECOND_SEGMENT_INDEX} -DSECOND_SEGMENT_REVERSED)
target_compile_definitions("${CMAKE_PROJECT_NAME}_ws2812_rev_multisegment_at_${SECOND_SEGMENT_INDEX}" PRIVATE -DNEOPIXEL_RGB -DDATA_PIN=${OUTPUT_DATA_PIN} -DSPI_INTERFACE=${OUTPUT_SPI_INTERFACE} -DCLOCK_PIN=${OUTPUT_SPI_CLOCK_PIN} -DSECOND_SEGMENT_START_INDEX=${SECOND_SEGMENT_INDEX} -DSECOND_SEGMENT_REVERSED)
ENDIF()
ENDIF()

0 comments on commit a34f6b3

Please sign in to comment.