-
|
Hey all and a special shout out to @awawa-dev , thanks for all your hard work on this! I've just rebuilt my Hyperion as the previous setup was quite old and was using sk6812spi and didn't play nicely with the latest update and now looking for some assistance before I go mad and waste even more time troubleshooting something that might be above me. I can't get the new setup to activate my strip, there appears to be no output. I'll attach some pics of my setup.
My HyperHDR backup is here: Here is my latest log below: 2024-04-20T00:31:01.599Z [CORE] TTY is not attached to the log output Any help would be greatly appreciated. |
Beta Was this translation helpful? Give feedback.
Replies: 6 comments 6 replies
-
|
Hey, this is just a guess, as I’m not an expert here at all. But shouldn’t you be using an SD image if you’re on a Pi ? …
<https://github.com/awawa-dev/HyperHDR/releases/download/v20.0.0.0/SD-card-image-64bits-aarch64.img.xz>
github.com<https://github.com/awawa-dev/HyperHDR/releases/download/v20.0.0.0/SD-card-image-64bits-aarch64.img.xz>
[X]<https://github.com/awawa-dev/HyperHDR/releases/download/v20.0.0.0/SD-card-image-64bits-aarch64.img.xz>
…Sent from my iPhone
On 20 Apr 2024, at 04:22, Pilotrysa ***@***.***> wrote:
Hey all and a special shout out to @awawa-dev<https://github.com/awawa-dev> , thanks for all your hard work on this!
I've just rebuilt my Hyperion as the previous setup was quite old and was using sk6812spi and didn't play nicely with the latest update and now looking for some assistance before I go mad and waste even more time troubleshooting something that might be above me.
I can't get the new setup to activate my strip, there appears to be no output.
I have reflashed the ESP32-S2 mini (Multiple times with factory COLD + NEUTRAL / (hyperspi_esp32_s2_mini_SK6812_RGBW_NEUTRAL.factory), re-flashed the PI using (HyperHDR-20.0.0.0-Linux-aarch64.deb), rebuilt an entirely new board to make sure the level shifter wasn't DOA. I've run the traces with a Multimeter and still can't figure out what the issue is.
I'll attach some pics of my setup.
I'm sure it's a pinout/soldering issue, but just can't get my head around it!
Looked at a lot of blog posts and i'll attach the pic of the setup that is basically the same as mine, that I worked off for troubleshooting.
<url>Hyper1.jpg (view on web)<https://github.com/awawa-dev/HyperSPI/assets/65233288/81f030f7-59df-44e9-9e9e-553e0fcddb50>
Hyper2.jpg (view on web)<https://github.com/awawa-dev/HyperSPI/assets/65233288/6e5f97ee-7165-4ddf-a7de-44854525c7f5>
Hyper3.jpg (view on web)<https://github.com/awawa-dev/HyperSPI/assets/65233288/61e2fa87-a7b8-4061-b8c9-17f2bfd8f8ec>
Hyper4.jpg (view on web)<https://github.com/awawa-dev/HyperSPI/assets/65233288/799b0ad3-7d47-4446-8383-ce157476d38a>
Hyper5.jpg (view on web)<https://github.com/awawa-dev/HyperSPI/assets/65233288/a81bad97-246e-434d-a8c9-c8ded4e250fc>
Hyper6.png (view on web)<https://github.com/awawa-dev/HyperSPI/assets/65233288/7a5217d5-1cef-42e2-add5-a46844e65488>
My HyperHDR back is here:
HyperHDR-20.0.0.0-Backup-2024-04-20.json<https://github.com/awawa-dev/HyperSPI/files/15046655/HyperHDR-20.0.0.0-Backup-2024-04-20.json>
Here is my latest log below:
2024-04-20T00:31:01.599Z [CORE] TTY is not attached to the log output
2024-04-20T00:31:01.632Z [MAIN] Database path: '/home/pi/.hyperhdr/db/hyperhdr.db', readonlyMode = disabled
2024-04-20T00:31:01.635Z [MAIN] Starting HyperHdr - 20.0.0.0, (HEAD detached at v20.0.0.0) (awawa-dev-9e960c9/52f12b4-1711236142), built: Mar 23 2024:23:52:04
2024-04-20T00:31:01.635Z [MAIN] Set user data path to '/home/pi/.hyperhdr'
2024-04-20T00:31:01.637Z [INSTANCE_CFG] Loading instance configuration
2024-04-20T00:31:01.685Z [DB] Database opened: /home/pi/.hyperhdr/db/hyperhdr.db
2024-04-20T00:31:01.729Z [INSTANCE_CFG] Settings database initialized
2024-04-20T00:31:01.757Z [SOUND_GRABBER] Sound device is disabled
2024-04-20T00:31:01.824Z [JSONSERVER] (JsonServer.cpp:26) Created new instance
2024-04-20T00:31:01.831Z [JSONSERVER] Started on port 19444
2024-04-20T00:31:01.832Z [SSDP] (SSDPHandler.cpp:31) SSDPHandler is initialized
2024-04-20T00:31:01.783Z [V4L2:auto] (GrabberWrapper.cpp:55) Starting the grabber wrapper
2024-04-20T00:31:01.784Z [V4L2:AUTO] Found capture device: /dev/video15
2024-04-20T00:31:01.784Z [V4L2:AUTO] Found capture device: /dev/video21
2024-04-20T00:31:01.784Z [V4L2:AUTO] Found capture device: /dev/video14
2024-04-20T00:31:01.784Z [V4L2:AUTO] Found capture device: /dev/video22
2024-04-20T00:31:01.786Z [X11_SYSTEM:AUTO] Loaded X11 proxy library for screen capturing
2024-04-20T00:31:01.790Z [HYPERHDR0] Starting the instance
2024-04-20T00:31:01.790Z [DAEMON] The system doesn't support the X11 system grabber
2024-04-20T00:31:01.790Z [INSTANCE_CFG0] Loading instance configuration
2024-04-20T00:31:01.790Z [DAEMON] The system doesn't support the framebuffer system grabber
2024-04-20T00:31:01.790Z [DB] Database opened: /home/pi/.hyperhdr/db/hyperhdr.db
2024-04-20T00:31:01.790Z [X11_SYSTEM:auto] (SystemWrapper.cpp:71) Closing grabber: X11_SYSTEM:auto
2024-04-20T00:31:01.790Z [FRAMEBUF_SYSTEM:auto] (SystemWrapper.cpp:71) Closing grabber: FRAMEBUF_SYSTEM:auto
2024-04-20T00:31:01.841Z [INSTANCE_CFG0] Settings database initialized
2024-04-20T00:31:01.841Z [COMPONENTCTRL0] (ComponentController.cpp:31) ComponentController is initialized. Components are ENABLED
2024-04-20T00:31:01.844Z [MUXER0] (Muxer.cpp:55) Muxer initialized
2024-04-20T00:31:01.845Z [BLACKBORDER] Set mode to: default
2024-04-20T00:31:01.845Z [IMAGETOLED_MNG0] (ImageToLedManager.cpp:192) Set LED mapping type to advanced
2024-04-20T00:31:01.845Z [IMAGETOLED_MNG0] (ImageToLedManager.cpp:176) setSparseProcessing to 0
2024-04-20T00:31:01.845Z [IMAGETOLED_MNG0] (ImageToLedManager.cpp:103) ImageToLedManager initialized
2024-04-20T00:31:01.849Z [COLORSPACE_CALIBRATION0] classicMode: no, gammas:[1.50, 1.50, 1.50], saturation: 1.00, luminance: 1.00, backLight: [enabled, threshold: 1, colored: yes]
2024-04-20T00:31:01.849Z [LED_CALIBRATION0] (LedCalibration.cpp:101) Calibration config '0' for LED segment: [0, 269]
2024-04-20T00:31:01.851Z [HYPERHDR0] Led strip RGB order is: rgb
2024-04-20T00:31:01.852Z [SMOOTHING0] High resolution clock is NOT STEADY!
2024-04-20T00:31:01.852Z [SMOOTHING0] Clearing queued colors before: enabling
2024-04-20T00:31:01.852Z [SMOOTHING0] Smoothing queue is cleared
2024-04-20T00:31:01.852Z [COMPONENTCTRL0] Smoothing: enabled
2024-04-20T00:31:01.852Z [SMOOTHING0] Creating config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 150ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 2, antiFlickTime: 250
2024-04-20T00:31:01.852Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2024-04-20T00:31:01.852Z [SMOOTHING0] Smoothing queue is cleared
2024-04-20T00:31:01.852Z [SMOOTHING0] Selecting config (0) => type: Alternative, directMode: false, pause: false, settlingTime: 150ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 2, antiFlickTime: 250
2024-04-20T00:31:01.852Z [SMOOTHING0] Selecting config (0) => type: Alternative, directMode: false, pause: false, settlingTime: 150ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 2, antiFlickTime: 250
2024-04-20T00:31:01.853Z [LEDDEVICE0_AWA_SPI] Start LedDevice 'awa_spi'.
2024-04-20T00:31:01.853Z [V4L2:AUTO] Found capture device: /dev/video0
2024-04-20T00:31:01.853Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:337) deviceConfig: [{"colorOrder":"rgb","currentLedCount":270,"invert":false,"output":"/dev/spidev0.0","rate":25000000,"refreshTime":20,"smoothingRefreshTime":20,"spitype":"esp32","type":"awa_spi","white_channel_calibration":false}]
2024-04-20T00:31:01.853Z [LEDDEVICE0_AWA_SPI] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 50.00 Hz
2024-04-20T00:31:01.853Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:423) Refresh rate = 50.00 Hz
2024-04-20T00:31:01.853Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:373) Device is not ready to start a timer
2024-04-20T00:31:01.853Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:433) Refresh interval updated to 20ms
2024-04-20T00:31:01.853Z [LEDDEVICE0_AWA_SPI] (ProviderSpi.cpp:52) Speed: 25000000, Type: esp32
2024-04-20T00:31:01.853Z [LEDDEVICE0_AWA_SPI] (ProviderSpi.cpp:53) Inverted: no, Mode: 0
2024-04-20T00:31:01.853Z [LEDDEVICE0_AWA_SPI] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it).
2024-04-20T00:31:01.853Z [LEDDEVICE0_AWA_SPI] (LedDeviceAWA_spi.cpp:52) SPI driver with data integration check AWA protocol
2024-04-20T00:31:01.853Z [LEDDEVICE0_AWA_SPI] (LedDeviceAWA_spi.cpp:60) SPI header for 270 leds: Awa 0x01 0x0d 0x59
2024-04-20T00:31:01.853Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:247) Enable the device
2024-04-20T00:31:01.853Z [V4L2:AUTO] (V4L2Grabber.cpp:406) Device has 'brightness' control => min: -128, max: 127, default: -11
2024-04-20T00:31:01.854Z [V4L2:AUTO] (V4L2Grabber.cpp:412) Device has 'contrast' control => min: 0, max: 255, default: 148
2024-04-20T00:31:01.854Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:64) Switch on
2024-04-20T00:31:01.854Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:140) Power On
2024-04-20T00:31:01.854Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:367) Starting timer with interval = 20ms
2024-04-20T00:31:01.854Z [HYPER_MANAGER] HyperHDR instance 'Hyperion' has been started
2024-04-20T00:31:01.854Z [HYPERHDR0] The instance is running
2024-04-20T00:31:01.854Z [MUXER0] Register new input 'System/VIDEOGRABBER' with priority 240 as inactive
2024-04-20T00:31:01.854Z [COMPONENTCTRL0] Video capture device: enabled
2024-04-20T00:31:01.854Z [COMPONENTCTRL0] LED device: enabled
2024-04-20T00:31:01.854Z [V4L2:AUTO] (V4L2Grabber.cpp:418) Device has 'saturation' control => min: 0, max: 255, default: 180
2024-04-20T00:31:01.854Z [SMOOTHING0] Using alternative smoothing input (0)
2024-04-20T00:31:01.854Z [EFFECTENGINE0] Run effect "Rainbow swirl fast" on channel 0
2024-04-20T00:31:01.855Z [V4L2:AUTO] (V4L2Grabber.cpp:424) Device has 'hue' control => min: -128, max: 127, default: 0
2024-04-20T00:31:01.855Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1920 x 1080 @ 60 fps mjpeg input 0
2024-04-20T00:31:01.855Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1920 x 1080 @ 30 fps mjpeg input 0
2024-04-20T00:31:01.855Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1920 x 1080 @ 25 fps mjpeg input 0
2024-04-20T00:31:01.855Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1920 x 1080 @ 20 fps mjpeg input 0
2024-04-20T00:31:01.855Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1920 x 1080 @ 10 fps mjpeg input 0
2024-04-20T00:31:01.855Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1600 x 1200 @ 60 fps mjpeg input 0
2024-04-20T00:31:01.855Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1600 x 1200 @ 30 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1600 x 1200 @ 25 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1600 x 1200 @ 20 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1600 x 1200 @ 10 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1360 x 768 @ 60 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1360 x 768 @ 30 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1360 x 768 @ 25 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1360 x 768 @ 20 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1360 x 768 @ 10 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1280 x 1024 @ 60 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1280 x 1024 @ 30 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1280 x 1024 @ 25 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1280 x 1024 @ 20 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1280 x 1024 @ 10 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1280 x 960 @ 60 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1280 x 960 @ 30 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1280 x 960 @ 25 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1280 x 960 @ 20 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1280 x 960 @ 10 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1280 x 720 @ 60 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1280 x 720 @ 50 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1280 x 720 @ 30 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1280 x 720 @ 20 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1280 x 720 @ 10 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1024 x 768 @ 60 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1024 x 768 @ 50 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1024 x 768 @ 30 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1024 x 768 @ 20 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1024 x 768 @ 10 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 800 x 600 @ 60 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 800 x 600 @ 50 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 800 x 600 @ 30 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 800 x 600 @ 20 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 800 x 600 @ 10 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 720 x 576 @ 60 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 720 x 576 @ 50 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 720 x 576 @ 30 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 720 x 576 @ 20 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 720 x 576 @ 10 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 720 x 480 @ 60 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 720 x 480 @ 50 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 720 x 480 @ 30 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 720 x 480 @ 20 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 720 x 480 @ 10 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 640 x 480 @ 60 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 640 x 480 @ 50 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 640 x 480 @ 30 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 640 x 480 @ 20 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 640 x 480 @ 10 fps mjpeg input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1920 x 1080 @ 5 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1600 x 1200 @ 5 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1360 x 768 @ 8 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1280 x 1024 @ 8 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1280 x 960 @ 8 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1280 x 720 @ 10 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 1024 x 768 @ 10 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 800 x 600 @ 20 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 800 x 600 @ 10 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 800 x 600 @ 5 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 720 x 576 @ 25 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 720 x 576 @ 20 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 720 x 576 @ 10 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 720 x 576 @ 5 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 720 x 480 @ 30 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 720 x 480 @ 20 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 720 x 480 @ 10 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 720 x 480 @ 5 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 640 x 480 @ 30 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 640 x 480 @ 20 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 640 x 480 @ 10 fps yuyv input 0
2024-04-20T00:31:01.856Z [V4L2:AUTO] USB Video: USB Video (video0) [/dev/video0] 640 x 480 @ 5 fps yuyv input 0
2024-04-20T00:31:01.857Z [V4L2:AUTO] Restarting video grabber is now blocked due to reloading of the configuration
2024-04-20T00:31:01.857Z [V4L2:AUTO] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0
2024-04-20T00:31:01.857Z [V4L2:auto] (GrabberWrapper.cpp:126) CEC keycode. Start: 0, stop: 0
2024-04-20T00:31:01.857Z [V4L2:AUTO] (Grabber.cpp:273) setBrightnessContrastSaturationHue nothing changed
2024-04-20T00:31:01.857Z [V4L2:AUTO] (V4L2Grabber.cpp:125) setHdrToneMappingMode to: Disabled
2024-04-20T00:31:01.857Z [V4L2:AUTO] (Grabber.cpp:182) setFpsSoftwareDecimation to: 1
2024-04-20T00:31:01.857Z [SIGNAL_OLD] (DetectionManual.cpp:84) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2024-04-20T00:31:01.857Z [SIGNAL_OLD] (DetectionManual.cpp:74) Signal threshold set to: {12, 12, 12} and frames: 200
2024-04-20T00:31:01.857Z [SIGNAL_AUTO] (DetectionAutomatic.cpp:375) Automatic signal detection -> errorTolerance: 9, modelTolerance: 90, sleepTime: 5000, wakeTime: 1000
2024-04-20T00:31:01.857Z [V4L2:AUTO] (Grabber.cpp:380) setDeviceVideoStandard preparing to restart video grabber. Old: '' new: 'auto'
2024-04-20T00:31:01.857Z [V4L2:AUTO] Delayed restart of the grabber due to change of selected device
2024-04-20T00:31:01.857Z [V4L2:AUTO] (Grabber.cpp:200) Force encoding to: NO_CHANGE (old: NO_CHANGE)
2024-04-20T00:31:01.857Z [V4L2:AUTO] setQFrameDecimation is now: disabled
2024-04-20T00:31:01.857Z [V4L2:AUTO] Multithreading for V4L2 is enabled. Available thread's count 3
2024-04-20T00:31:01.857Z [V4L2:AUTO] Found capture device: /dev/video15
2024-04-20T00:31:01.858Z [V4L2:AUTO] Found capture device: /dev/video21
2024-04-20T00:31:01.858Z [WEBSERVER] Initialize Webserver
2024-04-20T00:31:01.858Z [V4L2:AUTO] Found capture device: /dev/video14
2024-04-20T00:31:01.858Z [V4L2:AUTO] Found capture device: /dev/video22
2024-04-20T00:31:01.858Z [V4L2:AUTO] Found capture device: /dev/video0
2024-04-20T00:31:01.858Z [V4L2:AUTO] (V4L2Grabber.cpp:406) Device has 'brightness' control => min: -128, max: 127, default: -11
2024-04-20T00:31:01.858Z [V4L2:AUTO] (V4L2Grabber.cpp:412) Device has 'contrast' control => min: 0, max: 255, default: 148
2024-04-20T00:31:01.859Z [V4L2:AUTO] (V4L2Grabber.cpp:418) Device has 'saturation' control => min: 0, max: 255, default: 180
2024-04-20T00:31:01.859Z [V4L2:AUTO] (V4L2Grabber.cpp:424) Device has 'hue' control => min: -128, max: 127, default: 0
2024-04-20T00:31:01.859Z [FLATBUFSERVER] Started on port 19400
2024-04-20T00:31:01.859Z [FLATBUFSERVER] Started local domain socket server: 'hyperhdr-domain'
2024-04-20T00:31:01.859Z [V4L2:AUTO] (V4L2Grabber.cpp:193) Forcing auto discovery device
2024-04-20T00:31:01.859Z [V4L2:AUTO] (V4L2Grabber.cpp:199) Auto discovery set to USB Video: USB Video (video0)
2024-04-20T00:31:01.859Z [V4L2:AUTO] (V4L2Grabber.cpp:213) Searching for USB Video: USB Video (video0) 0 x 0 @ 0 fps, input: -1 (NO_CHANGE)
2024-04-20T00:31:01.859Z [V4L2:AUTO] Forcing best guess
2024-04-20T00:31:01.859Z [V4L2:AUTO] *************************************************************************************************
2024-04-20T00:31:01.859Z [V4L2:AUTO] Starting V4L2 grabber. Selected: USB Video: USB Video (video0) [/dev/video0] 800 x 600 @ 60 fps mjpeg input -1
2024-04-20T00:31:01.859Z [V4L2:AUTO] *************************************************************************************************
2024-04-20T00:31:01.859Z [V4L2:AUTO] (V4L2Grabber.cpp:826) Hardware cropping is not supported: ignoring
2024-04-20T00:31:01.859Z [V4L2:AUTO] Set device input to: Camera 1
2024-04-20T00:31:01.860Z [V4L2:AUTO] Set resolution to: 800 x 600
2024-04-20T00:31:01.861Z [V4L2:AUTO] Set framerate to 60 FPS
2024-04-20T00:31:01.861Z [V4L2:AUTO] Brightness set to: -11 (default)
2024-04-20T00:31:01.862Z [V4L2:AUTO] Contrast set to: 148 (default)
2024-04-20T00:31:01.862Z [V4L2:AUTO] Saturation set to: 180 (default)
2024-04-20T00:31:01.862Z [V4L2:AUTO] Hue set to: 0 (default)
2024-04-20T00:31:01.862Z [V4L2:AUTO] (V4L2Grabber.cpp:105) LUT folder location: '/usr/share/hyperhdr/lut'
2024-04-20T00:31:01.862Z [V4L2:AUTO] LUT file is not found here: /home/pi/.hyperhdr/lut_lin_tables.3d
2024-04-20T00:31:01.867Z [V4L2:AUTO] (Grabber.cpp:458) LUT file found: /usr/share/hyperhdr/lut/lut_lin_tables.3d
2024-04-20T00:31:01.867Z [V4L2:AUTO] (Grabber.cpp:473) Index 2 for YUV
2024-04-20T00:31:01.894Z [SMOOTHING0] Using alternative smoothing procedure (0)
2024-04-20T00:31:01.962Z [EFFECTENGINE0] (EffectEngine.cpp:92) Start the effect: name [Rainbow swirl fast]
2024-04-20T00:31:01.962Z [MUXER0] Register new input 'System/EFFECT' with priority 0 as inactive
2024-04-20T00:31:02.044Z [HYPERHDR0] Boot effect: animation set to 'Rainbow swirl fast' [started]
2024-04-20T00:31:02.044Z [NETFORWARDER] Forwarder has changed state to disabled
2024-04-20T00:31:02.099Z [EFFECT0(Rainbo...)] Begin playing the effect with priority: 0
2024-04-20T00:31:02.107Z [MUXER0] Set visible priority to 255
2024-04-20T00:31:02.107Z [HYPERHDR0] New priority[255], previous [255]
2024-04-20T00:31:02.107Z [HYPERHDR0] No source left -> switch LED-Device off
2024-04-20T00:31:02.107Z [SMOOTHING0] Clearing queued colors before: disabling
2024-04-20T00:31:02.107Z [SMOOTHING0] Smoothing queue is cleared
2024-04-20T00:31:02.107Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:297) Disable the device
2024-04-20T00:31:02.107Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:381) Stopping refresh timer
2024-04-20T00:31:02.107Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:225) setBackLightEnabled: 0
2024-04-20T00:31:02.107Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:90) Switch off
2024-04-20T00:31:02.107Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:126) Power Off
2024-04-20T00:31:02.107Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:544) Set LED strip to black/power off
2024-04-20T00:31:02.108Z [LEDDEVICE0_AWA_SPI] (ProviderSpi.cpp:135) Closing SPI interface
2024-04-20T00:31:02.108Z [COMPONENTCTRL0] LED device: disabled
2024-04-20T00:31:02.153Z [MUXER0] Priority 0 is now active
2024-04-20T00:31:02.153Z [MUXER0] Set visible priority to 0
2024-04-20T00:31:02.153Z [HYPERHDR0] New priority[0], previous [255]
2024-04-20T00:31:02.153Z [HYPERHDR0] New source available -> switch LED-Device on
2024-04-20T00:31:02.153Z [SMOOTHING0] Clearing queued colors before: enabling
2024-04-20T00:31:02.153Z [SMOOTHING0] Smoothing queue is cleared
2024-04-20T00:31:02.154Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:247) Enable the device
2024-04-20T00:31:02.154Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:225) setBackLightEnabled: 0
2024-04-20T00:31:02.154Z [IMAGETOLED_MNG0] Total index number is: 1080 (memory: 1080). User sparse processing is: disabled, image size: 80 x 45, area number: 270
2024-04-20T00:31:02.154Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:64) Switch on
2024-04-20T00:31:02.154Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:140) Power On
2024-04-20T00:31:02.154Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:367) Starting timer with interval = 20ms
2024-04-20T00:31:02.154Z [COMPONENTCTRL0] LED device: enabled
2024-04-20T00:31:02.155Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2024-04-20T00:31:02.155Z [SMOOTHING0] Smoothing queue is cleared
2024-04-20T00:31:02.155Z [SMOOTHING0] Selecting config (2) => type: Linear, directMode: false, pause: false, settlingTime: 200ms, interval: 40ms (25Hz), antiFlickTres: 0, antiFlickStep: 0, antiFlickTime: 0
2024-04-20T00:31:02.155Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:381) Stopping refresh timer
2024-04-20T00:31:02.155Z [SMOOTHING0] Using linear smoothing input (2)
2024-04-20T00:31:02.155Z [LEDDEVICE0_AWA_SPI] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 25.00 Hz
2024-04-20T00:31:02.155Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:423) Refresh rate = 25.00 Hz
2024-04-20T00:31:02.155Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:367) Starting timer with interval = 40ms
2024-04-20T00:31:02.155Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:433) Refresh interval updated to 40ms
2024-04-20T00:31:02.155Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:448) LED refresh interval adjustment caused by smoothing configuration change to 40ms (proposed: 40ms)
2024-04-20T00:31:02.235Z [SMOOTHING0] Using linear smoothing procedure (2)
2024-04-20T00:31:02.542Z [WEBSERVER] Apply Webserver settings
2024-04-20T00:31:02.542Z [WEBSERVER] Set document root to: :/www
2024-04-20T00:31:02.542Z [WEBSERVER] Started: 'HyperHDR WebServer (HTTP)' on port: 8090
2024-04-20T00:31:02.542Z [SSDP] (SSDPHandler.cpp:93) The local address is empty
2024-04-20T00:31:02.542Z [WEBSERVER] Initialize Webserver
2024-04-20T00:31:02.542Z [WEBSERVER] Apply Webserver settings
2024-04-20T00:31:02.542Z [WEBSERVER] Set document root to: :/www
2024-04-20T00:31:02.815Z [WEBSERVER] Setup SSL certificate
2024-04-20T00:31:02.815Z [WEBSERVER] Setup private SSL key
2024-04-20T00:31:02.816Z [WEBSERVER] Started: 'HyperHDR WebServer (HTTPS)' on port: 8092
2024-04-20T00:31:02.816Z [SSDP] (SSDPHandler.cpp:42) SSDPHandler is initializing
2024-04-20T00:31:02.816Z [SSDP] Could not obtain the local address. Retry later (1/10)
2024-04-20T00:31:02.816Z [SSDP] (SSDPServer.cpp:95) Initialize the SSDP server
2024-04-20T00:31:02.816Z [SSDP] (SSDPHandler.cpp:93) The local address is empty
2024-04-20T00:31:03.106Z [V4L2:AUTO] Found and loaded LUT: '/usr/share/hyperhdr/lut/lut_lin_tables.3d'
2024-04-20T00:31:03.106Z [V4L2:AUTO] Video pixel format is set to: MJPEG
2024-04-20T00:31:03.110Z [V4L2:AUTO] Started
2024-04-20T00:31:03.159Z [V4L2:AUTO] (V4L2Grabber.cpp:1164) Worker's thread count = 3
2024-04-20T00:31:03.169Z [MUXER0] Priority 240 is now active
2024-04-20T00:31:04.068Z [NET_DISCOVERY] Found ESP32-S2 at ttyACM0:-1 (LOLIN-S2-MINI)
2024-04-20T00:31:04.044Z [SERVICE_mDNS] Failed to open any client sockets
2024-04-20T00:31:05.099Z [EFFECT0(Rainbo...)] The effect quits with priority: 0
2024-04-20T00:31:05.099Z [MUXER0] Removed source priority 0
2024-04-20T00:31:05.099Z [MUXER0] Set visible priority to 240
2024-04-20T00:31:05.099Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2024-04-20T00:31:05.099Z [SMOOTHING0] Smoothing queue is cleared
2024-04-20T00:31:05.099Z [SMOOTHING0] Selecting config (0) => type: Alternative, directMode: false, pause: false, settlingTime: 150ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 2, antiFlickTime: 250
2024-04-20T00:31:05.099Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:381) Stopping refresh timer
2024-04-20T00:31:05.099Z [SMOOTHING0] Using alternative smoothing input (0)
2024-04-20T00:31:05.100Z [HYPERHDR0] New priority[240], previous [0]
2024-04-20T00:31:05.100Z [LEDDEVICE0_AWA_SPI] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 50.00 Hz
2024-04-20T00:31:05.100Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:423) Refresh rate = 50.00 Hz
2024-04-20T00:31:05.100Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:225) setBackLightEnabled: 1
2024-04-20T00:31:05.100Z [EFFECTENGINE0] Effect 'Rainbow swirl fast' has finished.
2024-04-20T00:31:05.100Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:367) Starting timer with interval = 20ms
2024-04-20T00:31:05.100Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:433) Refresh interval updated to 20ms
2024-04-20T00:31:05.100Z [LEDDEVICE0_AWA_SPI] (LedDevice.cpp:448) LED refresh interval adjustment caused by smoothing configuration change to 20ms (proposed: 20ms)
2024-04-20T00:31:05.100Z [EFFECT0(Rainbo...)] Effect named: 'Rainbow swirl fast' is deleted
2024-04-20T00:31:05.118Z [IMAGETOLED_MNG0] Total index number is: 124800 (memory: 124800). User sparse processing is: disabled, image size: 800 x 600, area number: 270
2024-04-20T00:31:05.140Z [SMOOTHING0] Using alternative smoothing procedure (0)
2024-04-20T00:31:18.706Z [SERVICE_mDNS] Starting the network discovery thread
2024-04-20T00:31:19.122Z [NET_DISCOVERY] Found WLED at 192.168.1.236:80 (wled-6bc7aa.local)
2024-04-20T00:31:25.885Z [JSONSERVER] (JsonServer.cpp:91) New connection from: ::ffff:192.168.1.160
2024-04-20T00:31:25.930Z [JSONSERVER] (JsonServer.cpp:91) New connection from: ::ffff:192.168.1.160
2024-04-20T11:46:38.954Z [SSDP] (SSDPHandler.cpp:42) SSDPHandler is initializing
2024-04-20T11:46:38.955Z [SSDP] (SSDPHandler.cpp:183) The local address is: 192.168.1.160
2024-04-20T11:46:38.955Z [SSDP] (SSDPServer.cpp:95) Initialize the SSDP server
2024-04-20T11:46:38.955Z [WEBSERVER] (StaticFileServing.cpp:68) SSDP description is set up
2024-04-20T11:46:38.955Z [SSDP] Starting the SSDP server
2024-04-20T11:47:55.744Z [WEBSOCKET] (WebSocketClient.cpp:39) New connection from ::ffff:192.168.1.192
2024-04-20T11:48:02.069Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client ::ffff:192.168.1.192
2024-04-20T11:48:07.761Z [V4L2:AUTO] Video cache: size: 1, hits: 7103, needed: 1, cleanup: 0, limit: 8
2024-04-20T11:48:07.770Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 5ms, frames = 3601, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T11:49:07.775Z [PERFORMANCE] [USB: FPS = 60.04, decoding = 6ms, frames = 3603, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.04, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T11:50:07.770Z [PERFORMANCE] [USB: FPS = 60.04, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.04, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T11:51:07.770Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T11:52:07.770Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.04, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T11:53:07.770Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T11:54:07.771Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T11:55:07.767Z [PERFORMANCE] [USB: FPS = 60.04, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.04, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T11:56:07.767Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T11:57:07.767Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T11:58:07.767Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T11:59:07.776Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3603], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:00:07.769Z [PERFORMANCE] [USB: FPS = 60.04, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.04, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:01:07.772Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:02:07.772Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 5ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:03:07.773Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:04:07.772Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:05:07.770Z [PERFORMANCE] [USB: FPS = 60.04, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.04, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:06:07.768Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.04, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:07:07.768Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:08:07.765Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 5ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.04, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:09:07.775Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3603, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.04, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:10:07.772Z [PERFORMANCE] [USB: FPS = 60.04, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:11:07.772Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:12:07.772Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:13:07.772Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 5ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:14:07.772Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.04, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:15:07.768Z [PERFORMANCE] [USB: FPS = 60.04, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:16:07.774Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 5ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.04, processed = 3603], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:17:07.769Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3601], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:18:07.775Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.04, processed = 3603], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:19:07.774Z [PERFORMANCE] [USB: FPS = 60.04, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:20:07.774Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:20:10.884Z [WEBSOCKET] (HyperAPI.cpp:966) log streaming deactivated for client ::ffff:192.168.1.192
2024-04-20T12:20:11.311Z [WEBSOCKET] (HyperAPI.cpp:1109) message: [{"command":"leddevice","ledDeviceType":"awa_spi","subcommand":"discover","tan":647}]
2024-04-20T12:20:11.312Z [LEDDEVICE_AWA_SPI] (ProviderSpi.cpp:319) SPI devices discovered: [{"devices":[{"name":"/dev/spidev0.0","value":"/dev/spidev0.0"},{"name":"/dev/spidev0.1","value":"/dev/spidev0.1"}],"ledDeviceType":"awa_spi"}]
2024-04-20T12:20:11.313Z [WEBSOCKET] (HyperAPI.cpp:1133) response: [{"devices":[{"name":"/dev/spidev0.0","value":"/dev/spidev0.0"},{"name":"/dev/spidev0.1","value":"/dev/spidev0.1"}],"ledDeviceType":"awa_spi"}]
2024-04-20T12:21:07.775Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:22:07.774Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:23:07.772Z [PERFORMANCE] [USB: FPS = 60.04, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.04, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:24:07.771Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:25:07.770Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:26:07.767Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.04, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:27:07.770Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:28:07.777Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3603, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.04, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:29:07.773Z [PERFORMANCE] [USB: FPS = 60.04, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-04-20T12:29:42.929Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client ::ffff:192.168.1.192
2024-04-20T12:30:07.773Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 6ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
Any help would be greatly appreciated.
Thanks!!!!
—
Reply to this email directly, view it on GitHub<#44>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AOMGY26EIOAET5NEGSHBRJ3Y6HNO5AVCNFSM6AAAAABGQEIFEGVHI2DSMVQWIX3LMV43ERDJONRXK43TNFXW4OZWGUZTCMRSGE>.
You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Hi |
Beta Was this translation helpful? Give feedback.
-
|
BTW esp32-s2 boards often come without bootloader so make sure your board exposes COM port. Otherwise you need to restore esp32-s2 bootloader using recovery procedure. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks again for your time and energy on this one! HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, mem1: 0, mem2: 0, heap: 193280 Also rechecked my flash: Verified it also: With the Bootloader, basically you're just confirming I can get a comm port when connected to the device doing the flash? Hope we're getting closer! |
Beta Was this translation helpful? Give feedback.
-
|
If you receive something like that: we can assume that esp32 is working properly, but there is no communication. The question is, did you follow exactly the guidelines described in this test (HyperHDR settings)? You can observe the |
Beta Was this translation helpful? Give feedback.
-
|
I believe I did, followed your instructions as best I could. Went to the remote tab and activated an effect: Observed the output, then deactivated it: Output is below (Cutdown version as the bigger one had no changes): So the issue is the communication between the Pi and the ESP? |
Beta Was this translation helpful? Give feedback.
-
|
No, there is no communication (FPS:0) and the test procedure is different regarding HyperHDR, if it's not clear take a look on the blog. You should also disable LED component in the remote tab, not the video source. |
Beta Was this translation helpful? Give feedback.
-
|
Ok apologies about that, I think the blog was a little clearer for me. I think my log outputs looked similar to yours though: |
Beta Was this translation helpful? Give feedback.
-
|
If you enabled continues output in the smoothing, tested using color not effect and disabled LED device then it's fine now. The I used second pinout next to the esp32 (not s2) board to make a solid connection: |
Beta Was this translation helpful? Give feedback.
-
|
It ended up being the unsoldered ESP32 of all things, it was a really tight fit on the pins and this has worked in some other projects I did, but this time it was something so simple! Also with the Loopback test, the one on the one in the official Rpi docs doesn't print an output as per their instructions: The one I used below instead, works a treat! Thanks again for all your help, been amazing! |
Beta Was this translation helpful? Give feedback.
-
|
I've just sent some $$ your way for all the work you do on this project and the amount of time you put in helping people out like me, you should be very proud of yourself! One last question hopefully! I'm now at that stage! I did purchase one of your recommended 2130 grabbers, would you recommend I use this instead? Thanks again! |
Beta Was this translation helpful? Give feedback.
-
|
Thank you for your support! These logs arouse my suspicions:
this suggests the presence of the MS2109 grabber, which is a USB2.0 grabber and not USB3.0 as the inscription on the casing claims. Use the Usually grabbers with a loop cause big problems, e.g. they do not allow HDR or Dolby Vision passthrough, they do not support HDCP or they limit the colorspace to what they can handle (but I don't know the model you use, maybe it's different) .Therefore, although this means more cables, a solution with greater possibilities is to use an HDMI splitter (e.g. Ezcoo) and a separate grabber such as MS2130. |
Beta Was this translation helpful? Give feedback.
If you enabled continues output in the smoothing, tested using color not effect and disabled LED device then it's fine now. The
screenoutput didn't stop/resume/change during the procedure? That's not a good sign as there is no communication between Rpi and Esp for some reason. Did you finally solder pins or use soldered female jumpers for your esp32-s2 board or it's in the 'air' like on the picture? You can perform loopback test to confirm your Rpi SPI interface is working correctly https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#troubleshooting-spi-hardwareI used second pinout next to the esp32 (not s2) board to make a solid connection: