no DisplayModel 2 (Oled)

[ChrisVonFrosta]

How to acticate while compiling?

I did with 1 ,2 or 3 of the following lines:

#define USE_DISPLAY
//#define USE_DISPLAY_MODES1TO5
//#define USE_DISPLAY_SSD1306  

00:00:00.132 BRY: Berry initialized, RAM used 5205 bytes
00:00:00.142 I2C: LCD found at 0x71
00:00:01.151 DSP: LCD
....
22:48:47.861 CMD: Display
22:48:47.864 RSL: RESULT = {"Display":{"Model":1,"Type":0,"Width":16,"Height":2,"Mode":0,"Dimmer":50,"Size":1,"Font":1,"Rotate":0,"Invert":0,"Refresh":2,"Cols":[16,8],"Rows":2}}
22:48:50.912 CMD: Displaymodel 2
22:48:50.917 RSL: RESULT = {"DisplayModel":1}
22:48:53.667 CMD: Displaymodel 7
22:48:53.672 RSL: RESULT = {"DisplayModel":1}
22:49:59.425 CMD: i2cscan
22:49:59.459 RSL: RESULT = {"I2CScan":"Device(s) found on bus1 at 0x3c"}

display.ini

:H,SSD1306,240,240,1,I2C,3c,*,*,*
:S,0,2,1,0,30,20
:I
AE
D5,80
A8,3F
D3,00
40
8D,14
20,00
A1
C8
DA,12
81,9F
D9,F1
DB,40
A4
A6
AF
:o,AE
:O,AF
:A,00,10,40,00,00
:i,A6,A7
#

Option A 3 is set.

[Jason2866]

The driver define for the Universal Display Driver is missing

#define USE_UNIVERSAL_DISPLAY

[ChrisVonFrosta]

thx, i try it imediatly.

but i wonder why it found something on 0x71 after reboot.

00:00:00.072 I2C: LCD found at 0x71
00:00:01.118 DSP: LCD
...
23:08:16.974 CMD: i2cdriver
23:08:16.982 RSL: RESULT = {"I2CDriver":"3,!5,7,8,9,10,11,12,13,14,15,17,18,20,24,29,31,36,41,42,44,46,!47,48,58,62,65,69,76,77,82,89"}
23:08:21.766 CMD: i2cscan
23:08:21.800 RSL: RESULT = {"I2CScan":"Device(s) found on bus1 at 0x3c"}

[ChrisVonFrosta]

Thx, it woks. but no splash screen doesn't

[sfromis]

Splash screen depends on #define SHOW_SPLASH and SetOption135

[ChrisVonFrosta]

how to send text to nextline (from berry?) i get text only in first row.
\n not working.Or how to set position?

tasmota.cmd(f'DisplayText Counter: {cnt} RSSI= {msg["RSSI"]} SNR= {msg["SNR"]}')

[ChrisVonFrosta]

i found it here

DisplayText [s1l1c1]TEST