Skip to content

arachmani/ovirt-ansible-hosted-engine-setup

 
 

Repository files navigation

ovirt-ansible-hosted-engine-setup

This role has been migrated to oVirt Ansible Collection, please use latest version from there. This repository is now readonly and no longer used for active development.

Ansible role for deploying oVirt Hosted-Engine

Requirements

  • Ansible version 2.9.11 or higher
  • Python SDK version 4.2 or higher
  • Python netaddr library on the ansible controller node

Dependencies

No.

Prerequisites

  • A fully qualified domain name prepared for your Engine and the host. Forward and reverse lookup records must both be set in the DNS.

  • /var/tmp has at least 5 GB of free space.

  • Unless you are using Gluster, you must have prepared storage for your Hosted-Engine environment (choose one):

  • Install additional oVirt ansible role:

    $ ansible-galaxy install ovirt.engine-setup # case-sensitive

Role variables

General Variables

Name Default value Description
he_bridge_if eth0 The network interface ovirt management bridge will be configured on
he_fqdn null The engine FQDN as it configured on the DNS
he_mem_size_MB max The amount of memory used on the engine VM
he_reserved_memory_MB 512 The amount of memory reserved for the host
he_vcpus max The amount of CPUs used on the engine VM
he_disk_size_GB 61 Disk size of the engine VM
he_vm_mac_addr null MAC address of the engine vm network interface.
he_domain_type null Storage domain type. available options: nfs, iscsi, glusterfs, fc
he_storage_domain_addr null Storage domain IP/DNS address
he_ansible_host_name localhost hostname in use on the first HE host (not necessarily the Ansible controller one)
he_restore_from_file null a backup file created with engine-backup to be restored on the fly
he_pki_renew_on_restore false Renew engine PKI on restore if needed
he_cluster Default name of the cluster with hosted-engine hosts
he_cluster_cpu_type null cluster CPU type to be used in hosted-engine cluster (the same as HE host or lower)
he_cluster_comp_version null Compatibility version of the hosted-engine cluster. Default value is the latest compatibility version
he_data_center Default name of the datacenter with hosted-engine hosts
he_data_center_comp_version null Compatibility version of the hosted-engine data center. Default value is the latest compatibility version
he_host_name $(hostname -f) name used by the engine for the first host
he_host_address $(hostname -f) address used by the engine for the first host
he_bridge_if null interface used for the management bridge
he_apply_openscap_profile false apply a default OpenSCAP security profile on HE VM
he_network_test dns the way of the network connectivity check performed by ovirt-hosted-engine-ha and ovirt-hosted-engine-setup, available options: dns, ping, tcp or none.
he_tcp_t_address null hostname to connect if he_network_test is tcp
he_tcp_t_port null port to connect if he_network_test is tcp
he_pause_host false Pause the execution to let the user interactively fix host configuration
he_offline_deployment false If True, updates for all packages will be disabled
he_additional_package_list [] List of additional packages to be installed on engine VM apart from ovirt-engine package
he_debug_mode false If True, HE deployment will execute additional tasks for debug
he_db_password UNDEF Engine database password
he_dwh_db_password UNDEF DWH database password

NFS / Gluster Variables

Name Default value Description
he_mount_options '' NFS mount options
he_storage_domain_path null shared folder path on NFS server
he_nfs_version auto NFS version. available options: auto, v4, v3, v4_0, v4_1, v4_2
he_storage_if null the network interface name that is connected to the storage network, assumed to be pre-configured

ISCSI Variables

Name Default value Description
he_iscsi_username null iscsi username
he_iscsi_password null iscsi password
he_iscsi_target null iscsi target
he_lun_id null Lun ID
he_iscsi_portal_port null iscsi portal port
he_iscsi_portal_addr null iscsi portal address (just for interactive iSCSI discovery, use he_storage_domain_addr for the deployment)
he_iscsi_tpgt null iscsi tpgt
he_discard false Discard the whole disk space when removed. more info here

Static IP configuration Variables

DHCP configuration is used on the engine VM by default. However, if you would like to use static ip instead, define the following variables:

Name Default value Description
he_vm_ip_addr null engine VM ip address
he_vm_ip_prefix null engine VM ip prefix
he_dns_addr null engine VM DNS server
he_default_gateway null engine VM default gateway
he_vm_etc_hosts false Add engine VM ip and fqdn to /etc/hosts on the host

Example Playbook

This is a simple example for deploying Hosted-Engine with NFS storage domain.

This role can be used to deploy on localhost (the ansible controller one) or on a remote host (please correctly set he_ansible_host_name). All the playbooks can be found inside the examples/ folder.

hosted_engine_deploy_localhost.yml

---
- name: Deploy oVirt hosted engine
  hosts: localhost
  connection: local
  roles:
    - role: ovirt.hosted_engine_setup

hosted_engine_deploy_remotehost.yml

---
- name: Deploy oVirt hosted engine
  hosts: host123.localdomain
  roles:
    - role: ovirt.hosted_engine_setup

passwords.yml

---
# As an example this file is keep in plaintext, if you want to
# encrypt this file, please execute following command:
#
# $ ansible-vault encrypt passwords.yml
#
# It will ask you for a password, which you must then pass to
# ansible interactively when executing the playbook.
#
# $ ansible-playbook myplaybook.yml --ask-vault-pass
#
he_appliance_password: 123456
he_admin_password: 123456

Example 1: extra vars for NFS deployment with DHCP - he_deployment.json

{
    "he_bridge_if": "eth0",
    "he_fqdn": "he-engine.example.com",
    "he_vm_mac_addr": "00:a5:3f:66:ba:12",
    "he_domain_type": "nfs",
    "he_storage_domain_addr": "192.168.100.50",
    "he_storage_domain_path": "/var/nfs_folder"
}

Example 2: extra vars for iSCSI deployment with static IP, remote host - he_deployment_remote.json

{
    "he_bridge_if": "eth0",
    "he_fqdn": "he-engine.example.com",
    "he_vm_ip_addr": "192.168.1.214",
    "he_vm_ip_prefix": "24",
    "he_gateway": "192.168.1.1",
    "he_dns_addr": "192.168.1.1",
    "he_vm_etc_hosts": true,
    "he_vm_mac_addr": "00:a5:3f:66:ba:12",
    "he_domain_type": "iscsi",
    "he_storage_domain_addr": "192.168.1.125",
    "he_iscsi_portal_port": "3260",
    "he_iscsi_tpgt": "1",
    "he_iscsi_target": "iqn.2017-10.com.redhat.stirabos:he",
    "he_lun_id": "36589cfc000000e8a909165bdfb47b3d9",
    "he_mem_size_MB": "4096",
    "he_ansible_host_name": "host123.localdomain"
}

Test iSCSI connectivity and get LUN WWID before deploying

[root@c75he20180820h1 ~]# iscsiadm -m node --targetname iqn.2017-10.com.redhat.stirabos:he -p 192.168.1.125:3260 -l
[root@c75he20180820h1 ~]# iscsiadm -m session -P3
iSCSI Transport Class version 2.0-870
version 6.2.0.874-7
Target: iqn.2017-10.com.redhat.stirabos:data (non-flash)
	Current Portal: 192.168.1.125:3260,1
	Persistent Portal: 192.168.1.125:3260,1
		**********
		Interface:
		**********
		Iface Name: default
		Iface Transport: tcp
		Iface Initiatorname: iqn.1994-05.com.redhat:6a4517b3773a
		Iface IPaddress: 192.168.1.14
		Iface HWaddress: <empty>
		Iface Netdev: <empty>
		SID: 1
		iSCSI Connection State: LOGGED IN
		iSCSI Session State: LOGGED_IN
		Internal iscsid Session State: NO CHANGE
		*********
		Timeouts:
		*********
		Recovery Timeout: 5
		Target Reset Timeout: 30
		LUN Reset Timeout: 30
		Abort Timeout: 15
		*****
		CHAP:
		*****
		username: <empty>
		password: ********
		username_in: <empty>
		password_in: ********
		************************
		Negotiated iSCSI params:
		************************
		HeaderDigest: None
		DataDigest: None
		MaxRecvDataSegmentLength: 262144
		MaxXmitDataSegmentLength: 131072
		FirstBurstLength: 131072
		MaxBurstLength: 16776192
		ImmediateData: Yes
		InitialR2T: Yes
		MaxOutstandingR2T: 1
		************************
		Attached SCSI devices:
		************************
		Host Number: 3	State: running
		scsi3 Channel 00 Id 0 Lun: 2
			Attached scsi disk sdb		State: running
		scsi3 Channel 00 Id 0 Lun: 3
			Attached scsi disk sdc		State: running
Target: iqn.2017-10.com.redhat.stirabos:he (non-flash)
	Current Portal: 192.168.1.125:3260,1
	Persistent Portal: 192.168.1.125:3260,1
		**********
		Interface:
		**********
		Iface Name: default
		Iface Transport: tcp
		Iface Initiatorname: iqn.1994-05.com.redhat:6a4517b3773a
		Iface IPaddress: 192.168.1.14
		Iface HWaddress: <empty>
		Iface Netdev: <empty>
		SID: 4
		iSCSI Connection State: LOGGED IN
		iSCSI Session State: LOGGED_IN
		Internal iscsid Session State: NO CHANGE
		*********
		Timeouts:
		*********
		Recovery Timeout: 5
		Target Reset Timeout: 30
		LUN Reset Timeout: 30
		Abort Timeout: 15
		*****
		CHAP:
		*****
		username: <empty>
		password: ********
		username_in: <empty>
		password_in: ********
		************************
		Negotiated iSCSI params:
		************************
		HeaderDigest: None
		DataDigest: None
		MaxRecvDataSegmentLength: 262144
		MaxXmitDataSegmentLength: 131072
		FirstBurstLength: 131072
		MaxBurstLength: 16776192
		ImmediateData: Yes
		InitialR2T: Yes
		MaxOutstandingR2T: 1
		************************
		Attached SCSI devices:
		************************
		Host Number: 6	State: running
		scsi6 Channel 00 Id 0 Lun: 0
			Attached scsi disk sdd		State: running
		scsi6 Channel 00 Id 0 Lun: 1
			Attached scsi disk sde		State: running
[root@c75he20180820h1 ~]# lsblk /dev/sdd
NAME                                MAJ:MIN RM  SIZE RO TYPE  MOUNTPOINT
sdd                                   8:48   0  100G  0 disk
└─36589cfc000000e8a909165bdfb47b3d9 253:10   0  100G  0 mpath
[root@c75he20180820h1 ~]# lsblk /dev/sde
NAME                                MAJ:MIN RM SIZE RO TYPE  MOUNTPOINT
sde                                   8:64   0  10G  0 disk
└─36589cfc000000ab67ee1427370d68436 253:0    0  10G  0 mpath
[root@c75he20180820h1 ~]# /lib/udev/scsi_id --page=0x83 --whitelisted --device=/dev/sdd
36589cfc000000e8a909165bdfb47b3d9
[root@c75he20180820h1 ~]# iscsiadm -m node --targetname iqn.2017-10.com.redhat.stirabos:he -p 192.168.1.125:3260 -u
Logging out of session [sid: 4, target: iqn.2017-10.com.redhat.stirabos:he, portal: 192.168.1.125,3260]
Logout of [sid: 4, target: iqn.2017-10.com.redhat.stirabos:he, portal: 192.168.1.125,3260] successful.

Usage

  1. Check all the prerequisites and requirements are met.
  2. Encrypt passwords.yml
$ ansible-vault encrypt passwords.yml
  1. Execute the playbook

Local deployment:

$ ansible-playbook hosted_engine_deploy.yml --extra-vars='@he_deployment.json' --extra-vars='@passwords.yml' --ask-vault-pass

Deployment over a remote host:

ansible-playbook -i host123.localdomain, hosted_engine_deploy.yml --extra-vars='@he_deployment.json' --extra-vars='@passwords.yml' --ask-vault-pass

Deploy over a remote host from Ansible AWX/Tower

The flow creates a temporary VM with a running engine to use for configuring and bootstrapping the whole environment. The bootstrap engine VM runs over libvirt natted network so, in that stage, is not reachable from outside the host where it's running on.

When the role dynamically adds the freshly created engine VM to the inventory, it also configures the host to be used as an ssh proxy and this perfectly works directly running the playbook with ansible-playbook. On the other side, Ansible AWX/Tower by defaults relies on PRoot to isolate jobs and so the credentials supplied by AWX/Tower will not flow to the jump host configured with ProxyCommand.

This can be avoided disabling job isolation in AWX/Tower

Please notice that job isolation can be configured system wise but not only for the HE deploy job and so it's not a recommended practice on production environments.

Deployment time improvements

To significantly reduce the amount of time it takes to deploy a hosted engine over a remote host, add the following lines to /etc/ansible/ansible.cfg under the [ssh_connection] section:

ssh_args = -C -o ControlMaster=auto -o ControlPersist=30m
control_path_dir = /root/cp
control_path = %(directory)s/%%h-%%r
pipelining = True

Make changes in the engine VM during the deployment

In some cases, a user may want to make adjustments to the engine VM during the deployment process. There are 2 ways to do that:

Automatic:

Write ansible playbooks that will run on the engine VM before or after the engine VM installation.

Add the playbooks that will run before the engine setup to hooks/enginevm_before_engine_setup and the playbooks that will run after the engine setup to hooks/enginevm_after_engine_setup.

These playbooks will be consumed automatically by the role when you execute it.

Manual:

To make manual adjustments you can set the variable he_pause_host to true. This will pause the deployment after the engine has been setup and create a lock-file at /tmp that ends with _he_setup_lock on the machine the role was executed on. The deployment will continue after deleting the lock-file, or after 24 hours ( if the lock-file hasn't been removed ).

In order to proceed with the deployment, before deleting the lock-file, make sure that the host is on 'up' state at the engine's URL.

Both of the lock-file path and the engine's URL will be presented during the role execution.

Demo

Here a demo showing a deployment on NFS configuring the engine VM with static IP. asciicast

License

Apache License 2.0

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • HTML 68.6%
  • Shell 20.9%
  • Python 10.5%