Some commands don't work #31

ClassyCircuit · 2020-02-09T17:59:47Z

err: bash: -c: line 3: syntax error near unexpected token `('
2020/02/09 17:57:24 Process exited with status 1
err: bash: -c: line 3: `sudo rm -r /usr/dotnetapps/bugsincluded/!(*.db*)'

This is a valid linux command that removes all files and folders that don't match the pattern, it works when I run it manually on my server, but it doesn't work using this ssh-action tool.

The text was updated successfully, but these errors were encountered:

appleboy · 2020-04-30T08:03:45Z

Another approach is to put your command into the shell script file and execute sh xxxx.sh.

palashCItobuz · 2020-05-07T15:42:31Z

@appleboy

Another approach is to put your command into the shell script file and execute sh xxxx.sh.

The shell script is being able to run node js or npm commands. How can they be executed? Tried loading . /etc/profile in the shell script.

mittalyashu · 2020-07-07T11:18:39Z

Any suggestions?

      - name: Executing remote command
        uses: appleboy/[email protected]
        with:
          host: ${{ secrets.hosts }}
          USERNAME: ${{ secrets.USERNAME }}
          PORT: ${{ secrets.PORT }}
          KEY: ${{ secrets.SSHKEY }}
          script: sh ../../scripts/deploy.sh

If we try to execute sh ../../scripts/deploy.sh wouldn't it will try running inside the server where we're trying SSH into.

mojo706 · 2020-07-07T18:23:20Z

I think it will try to execute inside the vps you're trying to ssh into. You could use run instead like this

- name: Executing remote command
        uses: appleboy/[email protected]
        run: sh ../../scripts/deploy.sh
        with:
          host: ${{ secrets.hosts }}
          USERNAME: ${{ secrets.USERNAME }}
          PORT: ${{ secrets.PORT }}
          KEY: ${{ secrets.SSHKEY }}

I think that should work

mittalyashu · 2020-07-08T03:35:50Z

@mojo706 It shows an error:

a step cannot have both the `uses` and `run` keys

mojo706 · 2020-07-08T04:01:15Z

@mittalyashu could you show me your whole discord job?

mittalyashu · 2020-07-08T04:26:34Z

@mojo706

- name: Executing remote command
  uses: appleboy/[email protected]
  env:
    BACKEND_APP_PORT: 8080
    NODE_ENV: "production"
  with:
    host: ${{ secrets.IP }}
    USERNAME: ${{ secrets.USERNAME }}
    PORT: ${{ secrets.PORT }}
    KEY: ${{ secrets.SSHKEY }}
    envs: BACKEND_APP_PORT, NODE_ENV
    script: ls

mojo706 · 2020-07-08T04:38:28Z

  steps:
    - name: Executing remote command
      uses: appleboy/[email protected]
      env:
        BACKEND_APP_PORT: 8080
        NODE_ENV: "production"
      with:
        host: ${{ secrets.IP }}
        USERNAME: ${{ secrets.USERNAME }}
        PORT: ${{ secrets.PORT }}
        KEY: ${{ secrets.SSHKEY }}
        envs: BACKEND_APP_PORT, NODE_ENV
        script: ls

@mittalyashu try that

mittalyashu · 2020-07-08T06:09:13Z

Isn't it the exact same code which I have shared.

#31 (comment)

mojo706 · 2020-07-08T15:36:10Z

Lol shit I forgot to change it. I guess I was tired, I wanted you to add run under uses it should work now.

mittalyashu · 2020-07-09T01:07:26Z

You mean something like this?

- name: Executing remote command
  uses: appleboy/[email protected]
  run: echo "Running this in GitHub Action"
  env:
    BACKEND_APP_PORT: 8080
    NODE_ENV: "production"
  with:
    host: ${{ secrets.IP }}
    USERNAME: ${{ secrets.USERNAME }}
    PORT: ${{ secrets.PORT }}
    KEY: ${{ secrets.SSHKEY }}
    envs: BACKEND_APP_PORT, NODE_ENV
    script: ls

appleboy · 2020-07-09T01:37:26Z

  with:
    host: ${{ secrets.IP }}
    username: ${{ secrets.USERNAME }}
    port: ${{ secrets.PORT }}
    key: ${{ secrets.SSHKEY }}
    envs: BACKEND_APP_PORT, NODE_ENV
    script: ls

mojo706 · 2020-07-09T02:37:07Z

you need to have the steps keyword @mittalyashu

bnbrndn · 2021-01-02T20:11:40Z

Along the same lines, does anyone have a solution for cd not working? thanks

appleboy · 2021-01-03T01:17:16Z

@bnbrndn Post your config.

nick339s · 2021-02-01T13:05:59Z

I had some problem when i use root user access

ShravaniRoy · 2021-02-22T19:46:32Z

Along the same lines, does anyone have a solution for cd not working? thanks

Did you find a solution @bnbrndn

ShravaniRoy · 2021-02-22T19:48:51Z

Only the first command works from script:

Am I missing something?? @appleboy -- thank you!!

bnbrndn · 2021-02-22T21:18:58Z

Along the same lines, does anyone have a solution for cd not working? thanks

Did you find a solution @bnbrndn

The problem I was having was I needed to CD into a directory to run composer install. The work around I found was to run "composer install -d public_html"

Not the cleanest, but it did what I needed

suxiaolong · 2021-07-28T08:28:17Z

第一次同步时安装git, 第二次就可以把 yum -y install git 去掉了

jgilm · 2021-10-19T18:50:59Z

Only the first command works from script:

Am I missing something?? @appleboy -- thank you!!

I'm having the same issue. SSH to Windows Server only runs a single comand @ShravaniRoy did you ever solve this?

MahbbRah · 2021-11-23T04:11:37Z

This is crazy! the issue is yet not solved! I tried all different commands to run my sh file on remote local But it's not working, I guess it's running on a virtual docker environment. How could I run this on my remote machine?

@appleboy Please can you help.

kocyigityunus · 2022-01-06T12:54:18Z

@MahbbRah

this issue is about interactive vs non interactive shell.

you can check this at:
https://askubuntu.com/questions/247738/why-is-etc-profile-not-invoked-for-non-login-shells

basically, if you are running a command in a non interactive shell, like ssh-action, on many linux distros,

"/etc/bash.bashrc" file has a specific command that returns only, so some of the files didn't run and some specific commands doesn't add to path,

# /etc/bash.bashrc
# System-wide .bashrc file for interactive bash(1) shells.

# To enable the settings / commands in this file for login shells as well,
# this file has to be sourced in /etc/profile.

# If not running interactively, don't do anything
[ -z "$PS1" ] && return`

just comment out the line that returns early and everything should work fine, or you can use the real paths of the commands that you would like to use.

ronatory · 2022-02-07T21:16:17Z

Thanks @kocyigityunus. The hint for using the real paths

or you can use the real paths of the commands that you would like to use.

works for me

MageshSrinivasulu · 2022-10-10T05:28:48Z

@ShravaniRoy @jgilm Were you able to overcome the issue? I am too facing a similar problem where I am not able to run multiple commands on the windows server

ShravaniRoy · 2022-10-10T05:50:04Z

@ShravaniRoy @jgilm Were you able to overcome the issue? I am too facing a similar problem where I am not able to run multiple commands on the windows server

Hey Magesh, We actually moved to the ubuntu server. This worked fine on Ubuntu.

MageshSrinivasulu · 2022-10-10T06:04:51Z

@ShravaniRoy Thanks for the quick response. Created a separate issue for the same #189

mkosir · 2022-10-20T11:38:12Z

Hey, went through the answers and tried different approaches but nothing worked.
My question is how it would be possible to run my shell/bash script in separate file (my-script.sh), which is located on ext to github action file CI.yml?

 - name: Executing remote command
        uses: appleboy/[email protected]
        with:
          ...
          script: sh ./my-script.sh

In other CIs or terminal where this nice appleboy/ssh-action doesnt exist, to make it work you pass your own shell script as:

ssh root@${server} 'bash -s' < ./my-script.sh

marqueetest · 2023-07-12T09:15:02Z

Here is my config

      - name: Deploy source-code
        uses: appleboy/ssh-action@master
        with:
          HOST: ${{ secrets.HOST }}
          USERNAME: ${{ secrets.USER }}
          PORT: ${{ secrets.PORRT }}
          PASSWORD: ${{ secrets.PASSWORD }}
          script: |
            sh /var/www/automation/rerun-project.sh

Below is my sh file

cd /var/www/html/my-project
git pull
npm install
forever restart project

But while action run on git hub, it is giving below error

err: /var/www/automation/rerun-project.sh: 3: /var/www/automation/rerun-project.sh: npm: not found
err: /var/www/automation/rerun-project.sh: 4: /var/www/automation/rerun-project.sh: forever: not found

Below first two command working perfectly fine but not sure why npm and forever not working. npm & forever command I am able to execute from putty.

cd /var/www/html/my-project
git pull

Jkarage · 2023-07-21T12:22:44Z

Using the full path of the binary in the script worked for me. I believe the non interactive shell obtained from appleboy does not load the correct profiles.

// Example
/usr/local/go/bin/go build -o ./bin/client
/usr/bin/npm install

Hope using this or other tools would work.

MarcellHarmaci · 2023-09-05T11:12:20Z

The full path didn't work for me, but I found a solution. I realized that if I run echo $PATH in in a normal SSH session, I get a longer $PATH compared to what I get if I run the same command with the this GH Action workflow.

Reason: interactive vs non-interactive shell see → #31 (comment)

basically, if you are running a command in a non interactive shell, like ssh-action, on many linux distros,
"/etc/bash.bashrc" file has a specific command that returns only, so some of the files didn't run and some specific commands doesn't add to path,

Solution for npm: #21 (comment)

script: |
  export NVM_DIR=~/.nvm
  source ~/.nvm/nvm.sh
  npm --help

General solution:

Run the action like so to see what is on the $PATH when the action runs

script: |
  echo $PATH

A soft link inside one of the $PATH directories to the thing you are trying to use will probably solve the issue.

ondanieldev · 2024-05-04T00:19:01Z

@MahbbRah

this issue is about interactive vs non interactive shell.

you can check this at: https://askubuntu.com/questions/247738/why-is-etc-profile-not-invoked-for-non-login-shells

basically, if you are running a command in a non interactive shell, like ssh-action, on many linux distros,

"/etc/bash.bashrc" file has a specific command that returns only, so some of the files didn't run and some specific commands doesn't add to path,
# /etc/bash.bashrc
# System-wide .bashrc file for interactive bash(1) shells.

# To enable the settings / commands in this file for login shells as well,
# this file has to be sourced in /etc/profile.

# If not running interactively, don't do anything
[ -z "$PS1" ] && return`
just comment out the line that returns early and everything should work fine, or you can use the real paths of the commands that you would like to use.

Thanks @kocyigityunus. Commenting the .bashrc line solved my issue. As my workflow runs nvm, yarn and docker scripts, that was the easiest way to handle

appleboy · 2024-05-04T11:45:43Z

I will update the README to address the @kocyigityunus solution.

appleboy · 2024-05-04T11:53:30Z

See the document: https://github.com/appleboy/ssh-action#command-not-found-npm-or-other-command

quilicicf · 2024-07-12T09:34:14Z

Another solution that works (only for node global modules):

script: |
  PATH="$PATH:$(npm get prefix)/bin" # Adds global node modules to the PATH
  pm2 list # Uses a global node module, now in the PATH

dingshaohua-com · 2024-10-13T00:29:48Z

/etc/bash.bashrc

no file /etc/bash.bashrc in centos9

ondanieldev · 2024-10-13T00:45:44Z

Currently I do not have issues with that, but I do not use bash on my servers anymore. Instead, I use zsh.

dingshaohua-com · 2024-10-13T03:30:23Z

I have found a good solution, just add a line to your script, eg：

script: |
     source /etc/profile
     java -version

the /etc/profile is working for ssh remote command user, refer to this article

appleboy added bug Something isn't working question Further information is requested labels Apr 30, 2020

stepanjakl mentioned this issue Feb 1, 2023

npm command not found #21

Closed

appleboy mentioned this issue May 4, 2024

ci: refactor CI workflow and improve robustness #320

Merged

appleboy closed this as completed May 4, 2024

Some commands don't work #31

Some commands don't work #31

Comments

ClassyCircuit commented Feb 9, 2020

appleboy commented Apr 30, 2020

palashCItobuz commented May 7, 2020 • edited Loading

mittalyashu commented Jul 7, 2020

mojo706 commented Jul 7, 2020 • edited Loading

mittalyashu commented Jul 8, 2020 • edited Loading

mojo706 commented Jul 8, 2020 • edited Loading

mittalyashu commented Jul 8, 2020

mojo706 commented Jul 8, 2020

mittalyashu commented Jul 8, 2020

mojo706 commented Jul 8, 2020

mittalyashu commented Jul 9, 2020

appleboy commented Jul 9, 2020

mojo706 commented Jul 9, 2020

bnbrndn commented Jan 2, 2021

appleboy commented Jan 3, 2021

nick339s commented Feb 1, 2021

ShravaniRoy commented Feb 22, 2021

ShravaniRoy commented Feb 22, 2021 • edited Loading

bnbrndn commented Feb 22, 2021

suxiaolong commented Jul 28, 2021

jgilm commented Oct 19, 2021

MahbbRah commented Nov 23, 2021

kocyigityunus commented Jan 6, 2022 • edited Loading

ronatory commented Feb 7, 2022

MageshSrinivasulu commented Oct 10, 2022

ShravaniRoy commented Oct 10, 2022

MageshSrinivasulu commented Oct 10, 2022

mkosir commented Oct 20, 2022

marqueetest commented Jul 12, 2023

Jkarage commented Jul 21, 2023

MarcellHarmaci commented Sep 5, 2023

ondanieldev commented May 4, 2024 • edited Loading

appleboy commented May 4, 2024

appleboy commented May 4, 2024

quilicicf commented Jul 12, 2024

dingshaohua-com commented Oct 13, 2024

ondanieldev commented Oct 13, 2024

dingshaohua-com commented Oct 13, 2024

palashCItobuz commented May 7, 2020 •

edited

Loading

mojo706 commented Jul 7, 2020 •

edited

Loading

mittalyashu commented Jul 8, 2020 •

edited

Loading

mojo706 commented Jul 8, 2020 •

edited

Loading

ShravaniRoy commented Feb 22, 2021 •

edited

Loading

kocyigityunus commented Jan 6, 2022 •

edited

Loading

ondanieldev commented May 4, 2024 •

edited

Loading