HBASE-11062 hbtop

bin/hbase

@@ -120,6 +120,7 @@ if [ $# = 0 ]; then
   echo "  rowcounter       Run RowCounter tool"
   echo "  cellcounter      Run CellCounter tool"
   echo "  pre-upgrade      Run Pre-Upgrade validator tool"
+  echo "  hbtop            Run HBTop tool"
   echo "  CLASSNAME        Run the class named CLASSNAME"
   exit 1
 fi
@@ -223,7 +224,7 @@ if [ "${INTERNAL_CLASSPATH}" != "true" ]; then
   done
 
   # If command can use our shaded client, use it
-  declare -a commands_in_client_jar=("classpath" "version")
+  declare -a commands_in_client_jar=("classpath" "version" "hbtop")
   for c in "${commands_in_client_jar[@]}"; do
     if [ "${COMMAND}" = "${c}" ]; then
       if [ -n "${HADOOP_IN_PATH}" ] && [ -f "${HADOOP_IN_PATH}" ]; then
@@ -656,6 +657,24 @@ elif [ "$COMMAND" = "pre-upgrade" ] ; then
   CLASS='org.apache.hadoop.hbase.tool.PreUpgradeValidator'
 elif [ "$COMMAND" = "completebulkload" ] ; then
   CLASS='org.apache.hadoop.hbase.tool.BulkLoadHFilesTool'
+elif [ "$COMMAND" = "hbtop" ] ; then
+  CLASS='org.apache.hadoop.hbase.hbtop.HBTop'
+  if [ -n "${shaded_jar}" ] ; then
+    for f in "${HBASE_HOME}"/lib/hbase-hbtop*.jar; do
+      if [ -f "${f}" ]; then
+        CLASSPATH="${CLASSPATH}:${f}"
+        break
+      fi
+    done
+    for f in "${HBASE_HOME}"/lib/commons-lang3*.jar; do
+      if [ -f "${f}" ]; then
+        CLASSPATH="${CLASSPATH}:${f}"
+        break
+      fi
+    done
+  fi
+
+  HBASE_OPTS="${HBASE_OPTS} -Dlog4j.configuration=file:${HBASE_HOME}/conf/log4j-hbtop.properties"
 else
   CLASS=$COMMAND
 fi

conf/log4j-hbtop.properties

@@ -0,0 +1,27 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+log4j.rootLogger=WARN,console
+log4j.threshold=WARN
+
+# console
+log4j.appender.console=org.apache.log4j.ConsoleAppender
+log4j.appender.console.target=System.err
+log4j.appender.console.layout=org.apache.log4j.PatternLayout
+log4j.appender.console.layout.ConversionPattern=%d{ISO8601} %-5p [%t] %c{2}: %m%n
+
+# ZooKeeper will still put stuff at WARN
+log4j.logger.org.apache.zookeeper=ERROR

hbase-assembly/pom.xml

@@ -309,6 +309,10 @@
       <groupId>org.apache.hbase</groupId>
       <artifactId>hbase-zookeeper</artifactId>
     </dependency>
+    <dependency>
+      <groupId>org.apache.hbase</groupId>
+      <artifactId>hbase-hbtop</artifactId>
+    </dependency>
     <dependency>
       <groupId>jline</groupId>
       <artifactId>jline</artifactId>

hbase-hbtop/README.md

@@ -0,0 +1,248 @@
+<!---
+Licensed to the Apache Software Foundation (ASF) under one
+or more contributor license agreements.  See the NOTICE file
+distributed with this work for additional information
+regarding copyright ownership.  The ASF licenses this file
+to you under the Apache License, Version 2.0 (the
+"License"); you may not use this file except in compliance
+with the License.  You may obtain a copy of the License at
+
+  http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing,
+software distributed under the License is distributed on an
+"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+KIND, either express or implied.  See the License for the
+specific language governing permissions and limitations
+under the License.
+-->
+
+# hbtop
+
+## Overview
+
+`hbtop` is a real-time monitoring tool for HBase like Unix's top command.
+It can display summary information as well as metrics per Region/Namespace/Table/RegionServer.
+In this tool, you can see the metrics sorted by a selected field and filter the metrics to see only metrics you really want to see.
+Also, with the drill-down feature, you can find hot regions easily in a top-down manner.
+
+## Usage
+
+You can run hbtop with the following command:
+
+```
+$ hbase hbtop
+```
+
+In this case, the values of `hbase.client.zookeeper.quorum` and `zookeeper.znode.parent` in `hbase-site.xml` in the classpath or the default values of them are used to connect.
+
+Or, you can specify your own zookeeper quorum and znode parent as follows:
+
+```
+$ hbase hbtop -Dhbase.client.zookeeper.quorum=<zookeeper quorum> -Dzookeeper.znode.parent=<znode parent>
+```
+
+![Top screen](img/top_screen.gif "Top screen")
+
+The top screen consists of a summary part and of a metrics part.
+In the summary part, you can see `HBase Version`, `Cluster ID`, `The number of region servers`, `Region count`, `Average Cluster Load` and `Aggregated Request/s`.
+In the metrics part, you can see metrics per Region/Namespace/Table/RegionServer depending on the selected mode.
+The top screen is refreshed in a certain period – 3 seconds by default.
+
+### Scrolling metric records
+
+You can scroll the metric records in the metrics part.
+
+![Scrolling metric records](img/scrolling_metric_records.gif "Scrolling metric records")
+
+### Command line arguments
+
+| Argument | Description |
+|---|---|
+| -delay &lt;arg&gt; | The refresh delay (in seconds); default is 3 seconds |
+| -help | Print usage; for help while the tool is running press `h` key |
+| -mode &lt;arg&gt; | The mode; `n` (Namespace)&#124;`t` (Table)&#124;r (Region)&#124;`s` (RegionServer), default is `r` (Region) |
+
+### Modes
+
+There are the following 4 modes in hbtop:
+
+| Mode | Description |
+|---|---|
+| Region | Showing metric records per region |
+| Namespace | Showing metric records per namespace |
+| Table | Showing metric records per table |
+| RegionServer | Showing metric records per region server |
+
+#### Region mode
+
+In Region mode, the default sort field is `#REQ/S`.
+
+The fields in this mode are as follows:
+
+| Field | Description | Displayed by default |
+|---|---|---|
+| RNAME | Region Name | false |
+| NAMESPACE | Namespace Name | true |
+| TABLE | Table Name | true |
+| SCODE | Start Code | false |
+| REPID | Replica ID | false |
+| REGION | Encoded Region Name | true |
+| RS | Short Region Server Name | true |
+| LRS | Long Region Server Name | false |
+| #REQ/S | Request Count per second | true |
+| #READ/S | Read Request Count per second | true |
+| #FREAD/S | Filtered Read Request Count per second | true |
+| #WRITE/S | Write Request Count per second | true |
+| SF | StoreFile Size | true |
+| USF | Uncompressed StoreFile Size | false |
+| #SF | Number of StoreFiles | true |
+| MEMSTORE | MemStore Size | true |
+| LOCALITY | Block Locality | true |
+| SKEY | Start Key | false |
+| #COMPingCELL | Compacting Cell Count | false |
+| #COMPedCELL | Compacted Cell Count | false |
+| %COMP | Compaction Progress | false |
+| LASTMCOMP | Last Major Compaction Time | false |
+
+#### Namespace mode
+
+In Namespace mode, the default sort field is `#REQ/S`.
+
+The fields in this mode are as follows:
+
+| Field | Description | Displayed by default |
+|---|---|---|
+| NAMESPACE | Namespace Name | true |
+| #REGION | Region Count | true |
+| #REQ/S | Request Count per second | true |
+| #READ/S | Read Request Count per second | true |
+| #FREAD/S | Filtered Read Request Count per second | true |
+| #WRITE/S | Write Request Count per second | true |
+| SF | StoreFile Size | true |
+| USF | Uncompressed StoreFile Size | false |
+| #SF | Number of StoreFiles | true |
+| MEMSTORE | MemStore Size | true |
+
+#### Table mode
+
+In Table mode, the default sort field is `#REQ/S`.
+
+The fields in this mode are as follows:
+
+| Field | Description | Displayed by default |
+|---|---|---|
+| NAMESPACE | Namespace Name | true |
+| TABLE | Table Name | true |
+| #REGION | Region Count | true |
+| #REQ/S | Request Count per second | true |
+| #READ/S | Read Request Count per second | true |
+| #FREAD/S | Filtered Read Request Count per second | true |
+| #WRITE/S | Write Request Count per second | true |
+| SF | StoreFile Size | true |
+| USF | Uncompressed StoreFile Size | false |
+| #SF | Number of StoreFiles | true |
+| MEMSTORE | MemStore Size | true |
+
+#### RegionServer mode
+
+In RegionServer mode, the default sort field is `#REQ/S`.
+
+The fields in this mode are as follows:
+
+| Field | Description | Displayed by default |
+|---|---|---|
+| RS | Short Region Server Name | true |
+| LRS | Long Region Server Name | false |
+| #REGION | Region Count | true |
+| #REQ/S | Request Count per second | true |
+| #READ/S | Read Request Count per second | true |
+| #FREAD/S | Filtered Read Request Count per second | true |
+| #WRITE/S | Write Request Count per second | true |
+| SF | StoreFile Size | true |
+| USF | Uncompressed StoreFile Size | false |
+| #SF | Number of StoreFiles | true |
+| MEMSTORE | MemStore Size | true |
+| UHEAP | Used Heap Size | true |
+| MHEAP | Max Heap Size | true |
+
+### Changing mode
+
+You can change mode by pressing `m` key in the top screen.
+
+![Changing mode](img/changing_mode.gif "Changing mode")
+
+### Changing the refresh delay
+
+You can change the refresh by pressing `d` key in the top screen.
+
+![Changing the refresh delay](img/changing_refresh_delay.gif "Changing the refresh delay")
+
+### Changing the displayed fields
+
+You can move to the field screen by pressing `f` key in the top screen. In the fields screen, you can change the displayed fields by choosing a field and pressing `d` key or `space` key.
+
+![Changing the displayed fields](img/changing_displayed_fields.gif "Changing the displayed fields")
+
+### Changing the sort field
+
+You can move to the fields screen by pressing `f` key in the top screen. In the field screen, you can change the sort field by choosing a field and pressing `s`. Also, you can change the sort order (ascending or descending) by pressing `R` key.
+
+![Changing the sort field](img/changing_sort_field.gif "Changing the sort field")
+
+
+### Changing the order of the fields
+
+You can move to the fields screen by pressing `f` key in the top screen. In the field screen, you can change the order of the fields.
+
+![Changing the order of the fields](img/changing_order_of_fields.gif "Changing the sort field")
+
+### Filters
+
+You can filter the metric records with the filter feature. We can add filters by pressing `o` key for ignoring case or `O` key for case sensitive.
+
+![Adding filters](img/adding_filters.gif "Adding filters")
+
+The syntax is as follows:
+```
+<Field><Operator><Value>
+```
+
+For example, we can add filters like the following:
+```
+NAMESPACE==default
+REQ/S>1000
+```
+
+The operators we can specify are as follows:
+
+| Operator | Description |
+|---|---|
+| = | Partial match |
+| == | Exact match |
+| > | Greater than |
+| >= | Greater than or equal to |
+| < | Less than |
+| <= | Less than and equal to |
+
+You can see the current filters by pressing `^o` key and clear them by pressing `=` key.
+
+![Showing and clearing filters](img/showing_and_clearing_filters.gif "Showing and clearing filters")
+
+### Drilling down
+
+You can drill down the metric record by choosing a metric record that you want to drill down and pressing `i` key in the top screen. With this feature, you can find hot regions easily in a top-down manner.
+
+![Drilling down](img/driling_down.gif "Drilling down")
+
+### Help screen
+
+You can see the help screen by pressing `h` key in the top screen.
+
+![Help screen](img/help_screen.gif "Help screen")
+
+## Others
+
+### How hbtop gets the metrics data
+
+hbtop gets the metrics from ClusterMetrics which is returned as the result of a call to Admin#getClusterMetrics() on the current HMaster. To add metrics to hbtop, they will need to be exposed via ClusterMetrics.