Ensure full functionality of AntreaProxy with proxyAll enabled when k…

…ube-proxy presents To ensure full functionality of AntreaProxy, except for handling ClusterIP from Nodes, even when kube-proxy in iptables mode is present, certain key changes are implemented when proxyAll is enabled: The jump rules for the chains managed by Antrea, `ANTREA-PREROUTING` and `ANTREA-OUTPUT` in nat table, are installed by inserting instead of appending to bypass the chain `KUBE-SERVICES` performing Service DNAT managed by kube-proxy. Antrea ensures that the jump rules take precedence over those managed by kube-proxy. The iptables rules of nat table chain `ANTREA-PREROUTING` are like below, and they are similar in chain `ANTREA-OUTPUT`. ``` -A ANTREA-PREROUTING -m comment --comment "Antrea: DNAT external to NodePort packets" -m set --match-set ANTREA-NODEPORT-IP dst,dst -j DNAT --to-destination 169.254.0.252 ``` The rule is to DNAT NodePort traffic, bypassing chain `KUBE-SERVICES`. The iptables rules of raw table chains ANTREA-PREROUTING / ANTREA-OUTPUT are like below: ``` 1. -A ANTREA-PREROUTING -m comment --comment "Antrea: do not track incoming encapsulation packets" -m udp -p udp --dport 6081 -m addrtype --dst-type LOCAL -j NOTRACK 2. -A ANTREA-PREROUTING -m comment --comment "Antrea: drop Pod multicast traffic forwarded via underlay network" -m set --match-set CLUSTER-NODE-IP src -d 224.0.0.0/4 -j DROP 3. -A ANTREA-PREROUTING -m comment --comment "Antrea: do not track external to external IP request packets" -m set --match-set ANTREA-EXTERNAL-IP dst -j NOTRACK 4. -A ANTREA-PREROUTING -m comment --comment "Antrea: do not track external to external IP reply packets" -m set --match-set ANTREA-EXTERNAL-IP src -j NOTRACK 5. -A ANTREA-OUTPUT -m comment --comment "Antrea: do not track local to external IP request packets" -m set --match-set ANTREA-EXTERNAL-IP dst -j NOTRACK 6. -A ANTREA-OUTPUT -m comment --comment "Antrea: do not track local to external IP reply packets" -m set --match-set ANTREA-EXTERNAL-IP src -j NOTRACK ``` - Rules 1-2 are not new rules. - Rules 3-4 are to bypass conntrack and for LoadBalancerIP/externalIP traffic sourced from external network, which also results in bypassing the chains managed by Antrea Proxy and kube-proxy in nat table. - Rules 5-6 are to bypass conntrack for LoadBalancerIP/externalIP traffic sourced from local Node, which also results in bypassing the chains managed by Antrea Proxy and kube-proxy in nat table. The following are the benchmark results of a LoadBalancer Service configured with DSR mode. The results of TCP_STREAM and TCP_RR (single TCP connection) are almost the same as that before. The result of TCP_CRR (multiple TCP connections) performs better than before. One reason should be that conntrack is skipped for LoadBalancer Services. ``` Test v2.0 proxyAll Dev proxyAll Delta TCP_STREAM 4933.97 4918.35 -0.32% TCP_RR 8095.49 8032.4 -0.78% TCP_CRR 1645.66 1888.93 +14.79% ``` Signed-off-by: Hongliang Liu <[email protected]>
antrea-io · Jul 9, 2024 · 1041cd6 · 1041cd6
1 parent 0d6f201
commit 1041cd6
Show file tree

Hide file tree

Showing 14 changed files with 731 additions and 421 deletions.
diff --git a/.github/workflows/kind.yml b/.github/workflows/kind.yml
@@ -170,6 +170,7 @@ jobs:
           --coverage \
           --encap-mode encap \
           --proxy-all \
+          --no-kube-proxy \
           --feature-gates LoadBalancerModeDSR=true \
           --load-balancer-mode dsr \
           --node-ipam

diff --git a/ci/kind/test-e2e-kind.sh b/ci/kind/test-e2e-kind.sh
@@ -28,6 +28,7 @@ _usage="Usage: $0 [--encap-mode <mode>] [--ip-family <v4|v6|dual>] [--coverage]
         --feature-gates               A comma-separated list of key=value pairs that describe feature gates, e.g. AntreaProxy=true,Egress=false.
         --run                         Run only tests matching the regexp.
         --proxy-all                   Enables Antrea proxy with all Service support.
+        --no-kube-proxy               Don't deploy kube-proxy.
         --load-balancer-mode          LoadBalancer mode.
         --node-ipam                   Enables Antrea NodeIPAM.
         --multicast                   Enables Multicast.
@@ -72,6 +73,7 @@ mode=""
 ipfamily="v4"
 feature_gates=""
 proxy_all=false
+no_kube_proxy=false
 load_balancer_mode=""
 node_ipam=false
 multicast=false
@@ -106,6 +108,10 @@ case $key in
     proxy_all=true
     shift
     ;;
+    --no-kube-proxy)
+    no_kube_proxy=true
+    shift
+    ;;
     --load-balancer-mode)
     load_balancer_mode="$2"
     shift 2
@@ -299,7 +305,7 @@ function setup_cluster {
     echoerr "invalid value for --ip-family \"$ipfamily\", expected \"v4\" or \"v6\""
     exit 1
   fi
-  if $proxy_all; then
+  if $no_kube_proxy; then
     args="$args --no-kube-proxy"
   fi
   if $node_ipam; then
@@ -353,7 +359,7 @@ function run_test {
       cat $CH_OPERATOR_YML | docker exec -i kind-control-plane dd of=/root/clickhouse-operator-install-bundle.yml
   fi
 
-  if $proxy_all; then
+  if $no_kube_proxy; then
       apiserver=$(docker exec -i kind-control-plane kubectl get endpoints kubernetes --no-headers | awk '{print $2}')
       if $coverage; then
         docker exec -i kind-control-plane sed -i.bak -E "s/^[[:space:]]*[#]?kubeAPIServerOverride[[:space:]]*:[[:space:]]*[a-z\"]+[[:space:]]*$/    kubeAPIServerOverride: \"$apiserver\"/" /root/antrea-coverage.yml /root/antrea-ipsec-coverage.yml

diff --git a/docs/antrea-proxy.md b/docs/antrea-proxy.md
@@ -42,13 +42,21 @@ the introduction of `proxyAll`, Antrea relied on userspace kube-proxy, which is
 no longer actively maintained by the K8s community and is slower than other
 kube-proxy backends.
 
-Note that on Linux, even when `proxyAll` is enabled, kube-proxy will usually
-take priority and will keep handling NodePort Service traffic (unless the source
-is a Pod, which is pretty unusual as Pods typically access Services by
-ClusterIP). This is because kube-proxy rules typically come before the rules
-installed by AntreaProxy to redirect traffic to OVS. When kube-proxy is not
-deployed or is removed from the cluster, AntreaProxy will then handle all
-Service traffic.
+Note that on Linux, before Antrea v2.1, when `proxyAll` is enabled, kube-proxy
+will usually take priority over AntreaProxy and will keep handling all kinds of
+Service traffic (unless the source is a Pod, which is pretty unusual as Pods
+typically access Services by ClusterIP). This is because kube-proxy rules typically
+come before the rules installed by AntreaProxy to redirect traffic to OVS. When
+kube-proxy is not deployed or is removed from the cluster, AntreaProxy will then
+handle all Service traffic.
+
+Starting with Antrea v2.1, when only `proxyAll` is enabled, AntreaProxy is capable
+of handling all kinds of Service traffic except ClusterIP, even if kube-proxy in
+iptables mode is present. This is accomplished by prioritizing the rules installed
+by AntreaProxy redirecting Service traffic to OVS over those installed by kube-proxy.
+
+For kube-proxy in IPVS mode, you can either configure it to use iptables mode or
+remove it.
 
 ### Removing kube-proxy
 

diff --git a/pkg/agent/proxy/proxier.go b/pkg/agent/proxy/proxier.go
@@ -32,7 +32,6 @@ import (
 	"k8s.io/apimachinery/pkg/runtime"
 	"k8s.io/apimachinery/pkg/selection"
 	apimachinerytypes "k8s.io/apimachinery/pkg/types"
-	"k8s.io/apimachinery/pkg/util/sets"
 	coreinformers "k8s.io/client-go/informers/core/v1"
 	discoveryinformers "k8s.io/client-go/informers/discovery/v1"
 	clientset "k8s.io/client-go/kubernetes"
@@ -121,13 +120,6 @@ type proxier struct {
 	serviceHealthServer healthcheck.ServiceHealthServer
 	numLocalEndpoints   map[apimachinerytypes.NamespacedName]int
 
-	// serviceIPRouteReferences tracks the references of Service IP routes. The key is the Service IP and the value is
-	// the set of ServiceInfo strings. Because a Service could have multiple ports and each port will generate a
-	// ServicePort (which is the unit of the processing), a Service IP route may be required by several ServicePorts.
-	// With the references, we install a route exactly once as long as it's used by any ServicePorts and uninstall it
-	// exactly once when it's no longer used by any ServicePorts.
-	// It applies to ClusterIP and LoadBalancerIP.
-	serviceIPRouteReferences map[string]sets.Set[string]
 	// syncedOnce returns true if the proxier has synced rules at least once.
 	syncedOnce      bool
 	syncedOnceMutex sync.RWMutex
@@ -569,10 +561,10 @@ func (p *proxier) installNodePortService(localGroupID, clusterGroupID binding.Gr
 		IsNested:           false, // Unsupported for NodePort
 		IsDSR:              false, // Unsupported because external traffic has been DNAT'd in host network before it's forwarded to OVS.
 	}); err != nil {
-		return fmt.Errorf("failed to install NodePort load balancing flows: %w", err)
+		return fmt.Errorf("failed to install NodePort load balancing OVS flows: %w", err)
 	}
-	if err := p.routeClient.AddNodePort(p.nodePortAddresses, svcPort, protocol); err != nil {
-		return fmt.Errorf("failed to install NodePort traffic redirecting rules: %w", err)
+	if err := p.routeClient.AddNodePortConfigs(p.nodePortAddresses, svcPort, protocol); err != nil {
+		return fmt.Errorf("failed to install NodePort traffic redirecting routing configurations: %w", err)
 	}
 	return nil
 }
@@ -588,8 +580,8 @@ func (p *proxier) uninstallNodePortService(svcPort uint16, protocol binding.Prot
 	if err := p.ofClient.UninstallServiceFlows(svcIP, svcPort, protocol); err != nil {
 		return fmt.Errorf("failed to remove NodePort load balancing flows: %w", err)
 	}
-	if err := p.routeClient.DeleteNodePort(p.nodePortAddresses, svcPort, protocol); err != nil {
-		return fmt.Errorf("failed to remove NodePort traffic redirecting rules: %w", err)
+	if err := p.routeClient.DeleteNodePortConfigs(p.nodePortAddresses, svcPort, protocol); err != nil {
+		return fmt.Errorf("failed to remove NodePort traffic redirecting routing configurations: %w", err)
 	}
 	return nil
 }
@@ -618,10 +610,10 @@ func (p *proxier) installExternalIPService(svcInfoStr string,
 			IsNested:           false, // Unsupported for ExternalIP
 			IsDSR:              features.DefaultFeatureGate.Enabled(features.LoadBalancerModeDSR) && loadBalancerMode == agentconfig.LoadBalancerModeDSR,
 		}); err != nil {
-			return fmt.Errorf("failed to install ExternalIP load balancing flows: %w", err)
+			return fmt.Errorf("failed to install ExternalIP load balancing OVS flows: %w", err)
 		}
-		if err := p.addRouteForServiceIP(svcInfoStr, ip, p.routeClient.AddExternalIPRoute); err != nil {
-			return fmt.Errorf("failed to install ExternalIP traffic redirecting routes: %w", err)
+		if err := p.routeClient.AddExternalIPConfigs(svcInfoStr, ip); err != nil {
+			return fmt.Errorf("failed to install ExternalIP load balancing routing configurations: %w", err)
 		}
 	}
 	return nil
@@ -631,10 +623,10 @@ func (p *proxier) uninstallExternalIPService(svcInfoStr string, externalIPString
 	for _, externalIP := range externalIPStrings {
 		ip := net.ParseIP(externalIP)
 		if err := p.ofClient.UninstallServiceFlows(ip, svcPort, protocol); err != nil {
-			return fmt.Errorf("failed to remove ExternalIP load balancing flows: %w", err)
+			return fmt.Errorf("failed to remove ExternalIP load balancing OVS flows: %w", err)
 		}
-		if err := p.deleteRouteForServiceIP(svcInfoStr, ip, p.routeClient.DeleteExternalIPRoute); err != nil {
-			return fmt.Errorf("failed to remove ExternalIP traffic redirecting routes: %w", err)
+		if err := p.routeClient.DeleteExternalIPConfigs(svcInfoStr, ip); err != nil {
+			return fmt.Errorf("failed to remove ExternalIP traffic redirecting routing configurations: %w", err)
 		}
 	}
 	return nil
@@ -665,71 +657,35 @@ func (p *proxier) installLoadBalancerService(svcInfoStr string,
 				IsNested:           false, // Unsupported for LoadBalancerIP
 				IsDSR:              features.DefaultFeatureGate.Enabled(features.LoadBalancerModeDSR) && loadBalancerMode == agentconfig.LoadBalancerModeDSR,
 			}); err != nil {
-				return fmt.Errorf("failed to install LoadBalancer load balancing flows: %w", err)
+				return fmt.Errorf("failed to install LoadBalancerIP load balancing OVS flows: %w", err)
 			}
 			if p.proxyAll {
-				if err := p.addRouteForServiceIP(svcInfoStr, ip, p.routeClient.AddExternalIPRoute); err != nil {
-					return fmt.Errorf("failed to install LoadBalancer traffic redirecting routes: %w", err)
+				if err := p.routeClient.AddExternalIPConfigs(svcInfoStr, ip); err != nil {
+					return fmt.Errorf("failed to install LoadBalancerIP traffic redirecting routing configurations: %w", err)
 				}
 			}
 		}
 	}
 	return nil
 }
 
-func (p *proxier) addRouteForServiceIP(svcInfoStr string, ip net.IP, addRouteFn func(net.IP) error) error {
-	ipStr := ip.String()
-	references, exists := p.serviceIPRouteReferences[ipStr]
-	// If the IP was not referenced by any Service port, install a route for it.
-	// Otherwise, just reference it.
-	if !exists {
-		if err := addRouteFn(ip); err != nil {
-			return err
-		}
-		references = sets.New[string](svcInfoStr)
-		p.serviceIPRouteReferences[ipStr] = references
-	} else {
-		references.Insert(svcInfoStr)
-	}
-	return nil
-}
-
 func (p *proxier) uninstallLoadBalancerService(svcInfoStr string, loadBalancerIPStrings []string, svcPort uint16, protocol binding.Protocol) error {
 	for _, ingress := range loadBalancerIPStrings {
 		if ingress != "" {
 			ip := net.ParseIP(ingress)
 			if err := p.ofClient.UninstallServiceFlows(ip, svcPort, protocol); err != nil {
-				return fmt.Errorf("failed to remove LoadBalancer load balancing flows: %w", err)
+				return fmt.Errorf("failed to remove LoadBalancerIP load balancing OVS flows: %w", err)
 			}
 			if p.proxyAll {
-				if err := p.deleteRouteForServiceIP(svcInfoStr, ip, p.routeClient.DeleteExternalIPRoute); err != nil {
-					return fmt.Errorf("failed to remove LoadBalancer traffic redirecting routes: %w", err)
+				if err := p.routeClient.DeleteExternalIPConfigs(svcInfoStr, ip); err != nil {
+					return fmt.Errorf("failed to remove LoadBalancerIP traffic redirecting routing configurations: %w", err)
 				}
 			}
 		}
 	}
 	return nil
 }
 
-func (p *proxier) deleteRouteForServiceIP(svcInfoStr string, ip net.IP, deleteRouteFn func(net.IP) error) error {
-	ipStr := ip.String()
-	references, exists := p.serviceIPRouteReferences[ipStr]
-	// If the IP was not referenced by this Service port, skip it.
-	if exists && references.Has(svcInfoStr) {
-		// Delete the IP only if this Service port is the last one referencing it.
-		// Otherwise, just dereference it.
-		if references.Len() == 1 {
-			if err := deleteRouteFn(ip); err != nil {
-				return err
-			}
-			delete(p.serviceIPRouteReferences, ipStr)
-		} else {
-			references.Delete(svcInfoStr)
-		}
-	}
-	return nil
-}
-
 func (p *proxier) installServices() {
 	for svcPortName, svcPort := range p.serviceMap {
 		svcInfo := svcPort.(*types.ServiceInfo)
@@ -1454,7 +1410,6 @@ func newProxier(
 		endpointsInstalledMap:       types.EndpointsMap{},
 		endpointsMap:                types.EndpointsMap{},
 		endpointReferenceCounter:    map[string]int{},
-		serviceIPRouteReferences:    map[string]sets.Set[string]{},
 		nodeLabels:                  map[string]string{},
 		serviceStringMap:            map[string]k8sproxy.ServicePortName{},
 		groupCounter:                groupCounter,