RESTruct is a go rest framework based on structs. The goal of this project is to automate routing, request and response based on struct methods.
go get github.com/altlimit/restructExported struct methods will be your handlers and will be routed like the following.
UpperCase turns to upper-case
With_Underscore to with/underscore
HasParam_0 to has-param/{0}
HasParam_0_AndMore_1 to has-param/{0}/and-more/{1}
There are multiple ways to process a request and a response, such as strongly typed parameters and returns or with *http.Request or http.ResponseWriter parameters. You can also use the context.Context parameter. Any other parameters will use the DefaultReader which you can override in your Handler.Reader.
type Calculator struct {
}
func (c *Calculator) Add(r *http.Request) interface{} {
var req struct {
A int64 `json:"a"`
B int64 `json:"b"`
}
if err := restruct.Bind(r, &req, http.MethodPost); err != nil {
return err
}
return req.A + req.B
}
func (c *Calculator) Subtract(a, b int64) int64 {
return a - b
}
func (c *Calculator) Divide(a, b int64) (int64, error) {
if b == 0 {
return 0, errors.New("divide by 0")
}
return a / b, nil
}
func (c *Calculator) Multiply(r struct {
A int64 `json:"a"`
B int64 `json:"b"`
}) int64 {
return r.A * r.B
}
func main() {
restruct.Handle("/api/v1/", &Calculator{})
http.ListenAndServe(":8080", nil)
}We have registered the Calculator struct here as our service and we should now have available endpoints which you can send json request and response to.
// POST http://localhost:8080/api/v1/add
{
"a": 10,
"b": 20
}
// -> 20
// -> or any errors such as 400 {"error": "Bad Request"}
// POST http://localhost:8080/api/v1/subtract
// Since this is a non-request, response, context parameter
// it will be coming from json array request as a default behavior from DefaultReader
[
20,
10
]
// -> 10
// POST http://localhost:8080/api/v1/divide
// You can also have the ability to have a strongly typed handlers in your parameters and return types.
// Default behaviour from DefaultWriter is if multiple returns with last type is an error with value then it writes it.
[
1,
0
]
// -> 500 {"error":"Internal Server Error"}
// POST http://localhost:8080/api/v1/multiply
// With a single struct as a parameter, it will be similar to Add's implementation where it uses Bind internally to populate it. You can change your Bind with DefaultReader{Bind:...} to add your validation library.
{
"a": 2,
"b": 5
}
// -> 10You can override default method named routes using Router interface. Implement Router in your service and return a slice Route.
func (c *Calculator) Routes() []Route {
return []Route{
Route{Handler: "Add", Path:"addition", Methods: []string{http.MethodPost}},
Route{Handler: "Subtract", Path:"subtraction", Methods: []string{http.MethodPost}},
}
}Here are more ways to create handlers.
type Blob struct {
Internal bool
}
func (b *Blob) Routes() []Route {
return []Route{
{Handler: "Download", Path: "blob/{path:.+}", methods: []string{http.MethodGet}}
}
}
// Will be available at /blob/{path:.+} since we overwrite it in Routes
// you can also avoid using regex by naming your handler with Blob_0Path and access with "0Path" params.
func (b *Blob) Download(w http.ResponseWriter, r *http.Request) {
path := restruct.Params(r)["path"]
// handle your struct like normal
}Here we use Router interface to add a regular expression. The path param on the download Route will accept anything even an additional nested paths / and it also has a standard handler definition.
To register the above service:
func main() {
restruct.Handle("/api/v1/", &Blob{})
http.ListenAndServe(":8080", nil)
}You can create additional service with a different prefix by calling NewHandler on your struct then adding it with AddService.
h := restruct.NewHandler(&Blob{})
h.AddService("/internal/{tag}/", &Blob{Internal: true})
restruct.Handle("/api/v1/", h)All your services will now be at /api/v1/internal/{tag}. You can also register the returned Handler in a third party router but make sure you call WithPrefix(...) on it if it's not a root route.
http.Handle("/", h)
// or if it's a not a root route
http.Handle("/api/v1/", h.WithPrefix("/api/v1/"))You can have parameters with method using number and access them using restruct.Params(req) or restruct.Vars(ctx):
// Will be available at /upload/{0}
func (b *Blob) Upload_0(r *http.Request) interface{} {
uploadType := restruct.Params(r)["0"]
// handle your request normally
fileID := ...
return fileID
}Refer to cmd/example for some advance usage.
The default ResponseWriter is DefaultWriter which uses json.Encoder().Encode to write outputs. This also handles errors and status codes. You can modify the output by implementing the ResponseWriter interface and set it in your Handler.Writer.
type TextWriter struct {}
func (tw *TextWriter) Write(w http.ResponseWriter, r *http.Request, types []reflect.Type, vals []reflect.Value) {
// types - slice of return types
// vals - slice of actual returned values
// this writer we simply write anything returned as text
var out []interface{}
for _, val := range vals {
out = append(out, val.Interface())
}
w.WriteHeader(http.StatusOK)
w.Header().Set("Content-Type", "text/plain")
w.Write([]byte(fmt.Sprintf("%v", out)))
}
h := restruct.NewHandler(&Blob{})
h.Writer = &TextWriter{}A handler can have any or no parameters, but the default parameters that doesn't go through request reader are: context.Context, *http.Request and http.ResponseWriter, these parameters will not be passed in RequestReader.Read interface.
// use form for urlencoded post
type login struct {
Username string `json:"username" form:"username"`
Password string `json:"password" from:"password"`
}
func (b *Blob) Login(l *login) interface{} {
log.Println("Login", l.Username, l.Password)
return "OK"
}This uses the DefaultReader which by default can unmarshal single struct and use default bind(restruct.Bind), you can use your own Bind with DefaultReader{Bind:yourBinder} if you want to add validation libraries. The Bind reads the body with json.Encoder, or form values. If you have multiple parameters you will need to send a json array body.
[
"FirstParam",
2,
{"third":"param"}
]This is the default behaviour of DefaultReader. You can implement RequestReader interface which will allow you to control your own parameter parsing.
type CustomReader struct {}
func (cr *CustomReader) Read(r *http.Request, types []reflect.Type) (vals []reflect.Value, err error) {
// types are the parameter types in order of your handler you must return equal number of vals to types.
// You'll only get types that is not *http.Request, http.ResponseWriter, context.Context
// You can return Error{} type here to return ResponseWriter errors/response and wrap your errors inside Error{Err:...}
return
}Uses standard middleware and add by handler.Use(...) or you can add it under Route when using the Router interface.
func auth(next http.Handler) http.Handler {
// you can use your h.Writer here if it's accessible somewhere
wr := rs.DefaultWriter{}
return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
if r.Header.Get("Authorization") != "abc" {
wr.WriteJSON(w, rs.Error{Status: http.StatusUnauthorized})
return
}
next.ServeHTTP(w, r)
})
}
h := restruct.NewHandler(&Blob{})
h.Use(auth)Nested structs are automatically routed. You can use route tag to customize or add route:"-" to skip exported structs.
type (
V1 struct {
Users User
DB DB `route:"-"`
}
User struct {
}
)
func (v *V1) Drop() {}
func (u *User) SendEmail() {}
func main() {
restruct.Handle("/api/v1/", &V1{})
http.ListenAndServe(":8080", nil)
}Will generate route: /api/v1/drop and /api/v1/users/send-email
Available helper utilities for processing requests and response.
// Adding context values in middleware such as logged in userID
auth := r.Header.Get("Authorization") == "some-key-or-jwt"
if userID, ok := UserIDFromAuth(auth); ok {
r = restruct.SetValue(r, "userID", userID)
}
// then access it from anywhere or a private method for getting your user record
if userID, ok := restruct.GetValue(r, "userID").(int64); ok {
user, err := DB.GetUserByID(ctx, userID)
// do something with user
}
// Bind helps read your json and form requests into a struct, you can add tag "query"
// to bind query strings at the same time. You can also add tag "form" to bind form posts from
// urlencoded or multipart. You can also use explicit functions BindQuery or BindForm.
var loginReq struct {
Username string `json:"username"`
Password string `json:"password"`
}
if err := restruct.Bind(r, &loginReq, http.MethodPost); err != nil {
return err
}
// Reading path parameters with Params /products/{0}
params := restruct.Params(r)
productID := params["0"]MIT