Skip to content

Commit

Permalink
✨ Malyan M180 (MarlinFirmware#21992)
Browse files Browse the repository at this point in the history
  • Loading branch information
McNugget6750 authored and thinkyhead committed May 29, 2021
1 parent 493eb44 commit a739af8
Show file tree
Hide file tree
Showing 3 changed files with 103 additions and 0 deletions.
1 change: 1 addition & 0 deletions Marlin/src/core/boards.h
Original file line number Diff line number Diff line change
Expand Up @@ -159,6 +159,7 @@
#define BOARD_PICA_REVB 1324 // PICA Shield (original version)
#define BOARD_PICA 1325 // PICA Shield (rev C or later)
#define BOARD_INTAMSYS40 1326 // Intamsys 4.0 (Funmat HT)
#define BOARD_MALYAN_M180 1327 // Malyan M180 Mainboard Version 2 (no display function, direct gcode only)

//
// ATmega1281, ATmega2561
Expand Down
100 changes: 100 additions & 0 deletions Marlin/src/pins/mega/pins_MALYAN_M180.h
Original file line number Diff line number Diff line change
@@ -0,0 +1,100 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

/**
* Malyan M180 pin assignments
* Contributed by Timo Birnschein ([email protected])
*/

#include "env_validate.h"

#define BOARD_INFO_NAME "Malyan M180 v.2"
//
// Limit Switches
//
#define X_STOP_PIN 48
#define Y_STOP_PIN 46
#define Z_STOP_PIN 42

//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN -1
#endif

//
// Steppers
//
#define X_STEP_PIN 55
#define X_DIR_PIN 54
#define X_ENABLE_PIN 56

#define Y_STEP_PIN 59
#define Y_DIR_PIN 58
#define Y_ENABLE_PIN 60

#define Z_STEP_PIN 63
#define Z_DIR_PIN 62
#define Z_ENABLE_PIN 64

#define E0_STEP_PIN 25
#define E0_DIR_PIN 24
#define E0_ENABLE_PIN 26

#define E1_STEP_PIN 29
#define E1_DIR_PIN 28
#define E1_ENABLE_PIN 39

//
// Temperature Sensors
//
#define TEMP_BED_PIN 15 // Analog Input

// Extruder thermocouples 0 and 1 are read out by two separate ICs using
// SPI for Max6675 Thermocouple
// Uses a separate SPI bus
#define THERMO_SCK_PIN 78 // E2 - SCK
#define THERMO_DO_PIN 3 // E5 - DO
#define THERMO_CS1_PIN 5 // E3 - CS0
#define THERMO_CS2_PIN 2 // E4 - CS1

#define MAX6675_SS_PIN THERMO_CS1_PIN
#define MAX6675_SS2_PIN THERMO_CS2_PIN
#define MAX6675_SCK_PIN THERMO_SCK_PIN
#define MAX6675_DO_PIN THERMO_DO_PIN

//
// Heaters / Fans
//
#define HEATER_0_PIN 6
#define HEATER_1_PIN 11
#define HEATER_BED_PIN 45

#ifndef FAN_PIN
#define FAN_PIN 7 // M106 Sxxx command supported and tested. M107 as well.
#endif

#ifndef FAN_PIN1
#define FAN_PIN1 12 // Currently Unsupported by Marlin
#endif
2 changes: 2 additions & 0 deletions Marlin/src/pins/pins.h
Original file line number Diff line number Diff line change
Expand Up @@ -270,6 +270,8 @@
#include "mega/pins_PICAOLD.h" // ATmega2560 env:mega2560
#elif MB(INTAMSYS40)
#include "mega/pins_INTAMSYS40.h" // ATmega2560 env:mega2560
#elif MB(MALYAN_M180)
#include "mega/pins_MALYAN_M180.h" // ATmega2560 env:mega2560

//
// ATmega1281, ATmega2561
Expand Down

0 comments on commit a739af8

Please sign in to comment.