🎨 Update SAMD51 headers

alrtprogrammer · Dec 16, 2022 · a121c80 · a121c80
1 parent 2778b00
commit a121c80
Show file tree

Hide file tree

Showing 18 changed files with 127 additions and 36 deletions.
diff --git a/Marlin/src/HAL/SAMD51/HAL.cpp b/Marlin/src/HAL/SAMD51/HAL.cpp
@@ -1,8 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,6 +19,10 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
+/**
+ * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ */
 #ifdef __SAMD51__
 
 #include "../../inc/MarlinConfig.h"

diff --git a/Marlin/src/HAL/SAMD51/HAL.h b/Marlin/src/HAL/SAMD51/HAL.h
@@ -1,8 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,6 +21,10 @@
  */
 #pragma once
 
+/**
+ * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ */
+
 #define CPU_32_BIT
 
 #include "../shared/Marduino.h"

diff --git a/Marlin/src/HAL/SAMD51/HAL_SPI.cpp b/Marlin/src/HAL/SAMD51/HAL_SPI.cpp
@@ -1,8 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -19,6 +20,10 @@
  *
  */
 
+/**
+ * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ */
+
 /**
  * Hardware and software SPI implementations are included in this file.
  *

diff --git a/Marlin/src/HAL/SAMD51/MarlinSerial_AGCM4.cpp b/Marlin/src/HAL/SAMD51/MarlinSerial_AGCM4.cpp
@@ -1,8 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,6 +19,10 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
+/**
+ * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ */
 #ifdef ADAFRUIT_GRAND_CENTRAL_M4
 
 /**

diff --git a/Marlin/src/HAL/SAMD51/MarlinSerial_AGCM4.h b/Marlin/src/HAL/SAMD51/MarlinSerial_AGCM4.h
@@ -1,8 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,6 +21,10 @@
  */
 #pragma once
 
+/**
+ * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ */
+
 #include "../../core/serial_hook.h"
 
 typedef Serial1Class<Uart> UartT;

diff --git a/Marlin/src/HAL/SAMD51/SAMD51.h b/Marlin/src/HAL/SAMD51/SAMD51.h
@@ -1,8 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,6 +21,10 @@
  */
 #pragma once
 
+/**
+ * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ */
+
 #define SYNC(sc)    while (sc) {  \
                       asm("");    \
                     }

diff --git a/Marlin/src/HAL/SAMD51/Servo.cpp b/Marlin/src/HAL/SAMD51/Servo.cpp
@@ -1,8 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -19,6 +20,10 @@
  *
  */
 
+/**
+ * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ */
+
 /**
  * This comes from Arduino library which at the moment is buggy and uncompilable
  */

diff --git a/Marlin/src/HAL/SAMD51/ServoTimers.h b/Marlin/src/HAL/SAMD51/ServoTimers.h
@@ -1,8 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,6 +21,10 @@
  */
 #pragma once
 
+/**
+ * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ */
+
 #define _useTimer1
 #define _useTimer2
 

diff --git a/Marlin/src/HAL/SAMD51/eeprom_flash.cpp b/Marlin/src/HAL/SAMD51/eeprom_flash.cpp
@@ -1,8 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,6 +19,10 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
+/**
+ * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ */
 #ifdef __SAMD51__
 
 #include "../../inc/MarlinConfig.h"

diff --git a/Marlin/src/HAL/SAMD51/eeprom_qspi.cpp b/Marlin/src/HAL/SAMD51/eeprom_qspi.cpp
@@ -1,8 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,6 +19,10 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
+/**
+ * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ */
 #ifdef __SAMD51__
 
 #include "../../inc/MarlinConfig.h"

diff --git a/Marlin/src/HAL/SAMD51/eeprom_wired.cpp b/Marlin/src/HAL/SAMD51/eeprom_wired.cpp
@@ -1,8 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,6 +19,10 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
+/**
+ * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ */
 #ifdef __SAMD51__
 
 #include "../../inc/MarlinConfig.h"

diff --git a/Marlin/src/HAL/SAMD51/endstop_interrupts.h b/Marlin/src/HAL/SAMD51/endstop_interrupts.h
@@ -1,8 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,6 +21,10 @@
  */
 #pragma once
 
+/**
+ * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ */
+
 /**
  * Endstop interrupts for ATMEL SAMD51 based targets.
  *

diff --git a/Marlin/src/HAL/SAMD51/fastio.h b/Marlin/src/HAL/SAMD51/fastio.h
@@ -1,8 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,6 +21,10 @@
  */
 #pragma once
 
+/**
+ * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ */
+
 /**
  * Fast IO functions for SAMD51
  */

diff --git a/Marlin/src/HAL/SAMD51/inc/SanityCheck.h b/Marlin/src/HAL/SAMD51/inc/SanityCheck.h
@@ -1,8 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,6 +19,11 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+#pragma once
+
+/**
+ * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ */
 
 /**
  * Test SAMD51 specific configuration values for errors at compile-time.

diff --git a/Marlin/src/HAL/SAMD51/pinsDebug.h b/Marlin/src/HAL/SAMD51/pinsDebug.h
@@ -1,8 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,6 +21,10 @@
  */
 #pragma once
 
+/**
+ * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ */
+
 #define NUMBER_PINS_TOTAL PINS_COUNT
 
 #define digitalRead_mod(p) extDigitalRead(p)

diff --git a/Marlin/src/HAL/SAMD51/spi_pins.h b/Marlin/src/HAL/SAMD51/spi_pins.h
@@ -1,8 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,6 +21,10 @@
  */
 #pragma once
 
+/**
+ * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ */
+
 #ifdef ADAFRUIT_GRAND_CENTRAL_M4
 
  /*

diff --git a/Marlin/src/HAL/SAMD51/timers.cpp b/Marlin/src/HAL/SAMD51/timers.cpp
@@ -1,8 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,6 +19,10 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
+/**
+ * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ */
 #ifdef __SAMD51__
 
 // --------------------------------------------------------------------------