uapi: add metadata flag to xdp flags #4

mswiatko · 2021-08-09T10:28:56Z

Add this flag to allow user to inform driver that metadata is used.
Set flag is sent to driver via exsisting ndo_bpf call in flag field.

Signed-off-by: Michal Swiatkowski [email protected]

Second approach to inform driver about metadata. Let user decide if metadata should be supported or not. Add this flag to allow user to inform driver that metadata is used. Set flag is sent to driver via exsisting ndo_bpf call in flag field. Signed-off-by: Michal Swiatkowski <[email protected]>

The ordering of MSI-X enable in hardware is dysfunctional: 1) MSI-X is disabled in the control register 2) Various setup functions 3) pci_msi_setup_msi_irqs() is invoked which ends up accessing the MSI-X table entries 4) MSI-X is enabled and masked in the control register with the comment that enabling is required for some hardware to access the MSI-X table Step #4 obviously contradicts #3. The history of this is an issue with the NIU hardware. When #4 was introduced the table access actually happened in msix_program_entries() which was invoked after enabling and masking MSI-X. This was changed in commit d71d643 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts") which removed the table write from msix_program_entries(). Interestingly enough nobody noticed and either NIU still works or it did not get any testing with a kernel 3.19 or later. Nevertheless this is inconsistent and there is no reason why MSI-X can't be enabled and masked in the control register early on, i.e. move step #4 above to step #1. This preserves the NIU workaround and has no side effects on other hardware. Fixes: d71d643 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts") Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Marc Zyngier <[email protected]> Reviewed-by: Ashok Raj <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]

Fix crash on reboot on a system with ASIX AX88178 USB adapter attached to it: | asix 1-1.4:1.0 eth0: unregister 'asix' usb-ci_hdrc.0-1.4, ASIX AX88178 USB 2.0 Ethernet | 8<--- cut here --- | Unable to handle kernel NULL pointer dereference at virtual address 0000028c | pgd = 5ec93aee | [0000028c] *pgd=00000000 | Internal error: Oops: 5 [#1] PREEMPT SMP ARM | Modules linked in: | CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.14.0-rc1-20210811-1 #4 | Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) | PC is at phy_disconnect+0x8/0x48 | LR is at ax88772_unbind+0x14/0x20 | [<80650d04>] (phy_disconnect) from [<80741aa4>] (ax88772_unbind+0x14/0x20) | [<80741aa4>] (ax88772_unbind) from [<8074e250>] (usbnet_disconnect+0x48/0xd8) | [<8074e250>] (usbnet_disconnect) from [<807655e0>] (usb_unbind_interface+0x78/0x25c) | [<807655e0>] (usb_unbind_interface) from [<805b03a0>] (__device_release_driver+0x154/0x20c) | [<805b03a0>] (__device_release_driver) from [<805b0478>] (device_release_driver+0x20/0x2c) | [<805b0478>] (device_release_driver) from [<805af944>] (bus_remove_device+0xcc/0xf8) | [<805af944>] (bus_remove_device) from [<805ab26c>] (device_del+0x178/0x4b0) | [<805ab26c>] (device_del) from [<807634a4>] (usb_disable_device+0xcc/0x178) | [<807634a4>] (usb_disable_device) from [<8075a060>] (usb_disconnect+0xd8/0x238) | [<8075a060>] (usb_disconnect) from [<8075a02c>] (usb_disconnect+0xa4/0x238) | [<8075a02c>] (usb_disconnect) from [<8075a02c>] (usb_disconnect+0xa4/0x238) | [<8075a02c>] (usb_disconnect) from [<80af3520>] (usb_remove_hcd+0xa0/0x198) | [<80af3520>] (usb_remove_hcd) from [<807902e0>] (host_stop+0x38/0xa8) | [<807902e0>] (host_stop) from [<8078d9e4>] (ci_hdrc_remove+0x3c/0x118) | [<8078d9e4>] (ci_hdrc_remove) from [<805b27ec>] (platform_remove+0x20/0x50) | [<805b27ec>] (platform_remove) from [<805b03a0>] (__device_release_driver+0x154/0x20c) | [<805b03a0>] (__device_release_driver) from [<805b0478>] (device_release_driver+0x20/0x2c) | [<805b0478>] (device_release_driver) from [<805af944>] (bus_remove_device+0xcc/0xf8) | [<805af944>] (bus_remove_device) from [<805ab26c>] (device_del+0x178/0x4b0) For this adapter we call ax88178_bind() and ax88772_unbind(), which is related to different chip version and different counter part *bind() function. Since this chip is currently not ported to the PHYLIB, we do not need to call phy_disconnect() here. So, to fix this crash, we need to add ax88178_unbind(). Fixes: e532a09 ("net: usb: asix: ax88772: add phylib support") Reported-by: Robin van der Gracht <[email protected]> Tested-by: Robin van der Gracht <[email protected]> Signed-off-by: Oleksij Rempel <[email protected]> Signed-off-by: David S. Miller <[email protected]>

We update the ctime/mtime of a block device when we remove it so that blkid knows the device changed. However we do this by re-opening the block device and calling filp_update_time. This is more correct because it'll call the inode->i_op->update_time if it exists, but the block dev inodes do not do this. Instead call generic_update_time() on the bd_inode in order to avoid the blkdev_open path and get rid of the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc2+ torvalds#406 Not tainted ------------------------------------------------------ losetup/11596 is trying to acquire lock: ffff939640d2f538 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0 but task is already holding lock: ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&lo->lo_mutex){+.+.}-{3:3}: __mutex_lock+0x7d/0x750 lo_open+0x28/0x60 [loop] blkdev_get_whole+0x25/0xf0 blkdev_get_by_dev.part.0+0x168/0x3c0 blkdev_open+0xd2/0xe0 do_dentry_open+0x161/0x390 path_openat+0x3cc/0xa20 do_filp_open+0x96/0x120 do_sys_openat2+0x7b/0x130 __x64_sys_openat+0x46/0x70 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #3 (&disk->open_mutex){+.+.}-{3:3}: __mutex_lock+0x7d/0x750 blkdev_get_by_dev.part.0+0x56/0x3c0 blkdev_open+0xd2/0xe0 do_dentry_open+0x161/0x390 path_openat+0x3cc/0xa20 do_filp_open+0x96/0x120 file_open_name+0xc7/0x170 filp_open+0x2c/0x50 btrfs_scratch_superblocks.part.0+0x10f/0x170 btrfs_rm_device.cold+0xe8/0xed btrfs_ioctl+0x2a31/0x2e70 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #2 (sb_writers#12){.+.+}-{0:0}: lo_write_bvec+0xc2/0x240 [loop] loop_process_work+0x238/0xd00 [loop] process_one_work+0x26b/0x560 worker_thread+0x55/0x3c0 kthread+0x140/0x160 ret_from_fork+0x1f/0x30 -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}: process_one_work+0x245/0x560 worker_thread+0x55/0x3c0 kthread+0x140/0x160 ret_from_fork+0x1f/0x30 -> #0 ((wq_completion)loop0){+.+.}-{0:0}: __lock_acquire+0x10ea/0x1d90 lock_acquire+0xb5/0x2b0 flush_workqueue+0x91/0x5e0 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x660 [loop] block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lo->lo_mutex); lock(&disk->open_mutex); lock(&lo->lo_mutex); lock((wq_completion)loop0); *** DEADLOCK *** 1 lock held by losetup/11596: #0: ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop] stack backtrace: CPU: 1 PID: 11596 Comm: losetup Not tainted 5.14.0-rc2+ torvalds#406 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack_lvl+0x57/0x72 check_noncircular+0xcf/0xf0 ? stack_trace_save+0x3b/0x50 __lock_acquire+0x10ea/0x1d90 lock_acquire+0xb5/0x2b0 ? flush_workqueue+0x67/0x5e0 ? lockdep_init_map_type+0x47/0x220 flush_workqueue+0x91/0x5e0 ? flush_workqueue+0x67/0x5e0 ? verify_cpu+0xf0/0x100 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x660 [loop] ? blkdev_ioctl+0x8d/0x2a0 block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

When removing the device we call blkdev_put() on the device once we've removed it, and because we have an EXCL open we need to take the ->open_mutex on the block device to clean it up. Unfortunately during device remove we are holding the sb writers lock, which results in the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc2+ torvalds#407 Not tainted ------------------------------------------------------ losetup/11595 is trying to acquire lock: ffff973ac35dd138 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0 but task is already holding lock: ffff973ac9812c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&lo->lo_mutex){+.+.}-{3:3}: __mutex_lock+0x7d/0x750 lo_open+0x28/0x60 [loop] blkdev_get_whole+0x25/0xf0 blkdev_get_by_dev.part.0+0x168/0x3c0 blkdev_open+0xd2/0xe0 do_dentry_open+0x161/0x390 path_openat+0x3cc/0xa20 do_filp_open+0x96/0x120 do_sys_openat2+0x7b/0x130 __x64_sys_openat+0x46/0x70 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #3 (&disk->open_mutex){+.+.}-{3:3}: __mutex_lock+0x7d/0x750 blkdev_put+0x3a/0x220 btrfs_rm_device.cold+0x62/0xe5 btrfs_ioctl+0x2a31/0x2e70 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #2 (sb_writers#12){.+.+}-{0:0}: lo_write_bvec+0xc2/0x240 [loop] loop_process_work+0x238/0xd00 [loop] process_one_work+0x26b/0x560 worker_thread+0x55/0x3c0 kthread+0x140/0x160 ret_from_fork+0x1f/0x30 -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}: process_one_work+0x245/0x560 worker_thread+0x55/0x3c0 kthread+0x140/0x160 ret_from_fork+0x1f/0x30 -> #0 ((wq_completion)loop0){+.+.}-{0:0}: __lock_acquire+0x10ea/0x1d90 lock_acquire+0xb5/0x2b0 flush_workqueue+0x91/0x5e0 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x660 [loop] block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lo->lo_mutex); lock(&disk->open_mutex); lock(&lo->lo_mutex); lock((wq_completion)loop0); *** DEADLOCK *** 1 lock held by losetup/11595: #0: ffff973ac9812c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop] stack backtrace: CPU: 0 PID: 11595 Comm: losetup Not tainted 5.14.0-rc2+ torvalds#407 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack_lvl+0x57/0x72 check_noncircular+0xcf/0xf0 ? stack_trace_save+0x3b/0x50 __lock_acquire+0x10ea/0x1d90 lock_acquire+0xb5/0x2b0 ? flush_workqueue+0x67/0x5e0 ? lockdep_init_map_type+0x47/0x220 flush_workqueue+0x91/0x5e0 ? flush_workqueue+0x67/0x5e0 ? verify_cpu+0xf0/0x100 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x660 [loop] ? blkdev_ioctl+0x8d/0x2a0 block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc21255d4cb So instead save the bdev and do the put once we've dropped the sb writers lock in order to avoid the lockdep recursion. Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

If CONFIG_BLK_DEV_LOOP && CONFIG_MTD (at least; there might be other combinations), lockdep complains circular locking dependency at __loop_clr_fd(), for major_names_lock serves as a locking dependency aggregating hub across multiple block modules. ====================================================== WARNING: possible circular locking dependency detected 5.14.0+ torvalds#757 Tainted: G E ------------------------------------------------------ systemd-udevd/7568 is trying to acquire lock: ffff88800f334d48 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x70/0x560 but task is already holding lock: ffff888014a7d4a0 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x4d/0x400 [loop] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #6 (&lo->lo_mutex){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_killable_nested+0x17/0x20 lo_open+0x23/0x50 [loop] blkdev_get_by_dev+0x199/0x540 blkdev_open+0x58/0x90 do_dentry_open+0x144/0x3a0 path_openat+0xa57/0xda0 do_filp_open+0x9f/0x140 do_sys_openat2+0x71/0x150 __x64_sys_openat+0x78/0xa0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #5 (&disk->open_mutex){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_nested+0x17/0x20 bd_register_pending_holders+0x20/0x100 device_add_disk+0x1ae/0x390 loop_add+0x29c/0x2d0 [loop] blk_request_module+0x5a/0xb0 blkdev_get_no_open+0x27/0xa0 blkdev_get_by_dev+0x5f/0x540 blkdev_open+0x58/0x90 do_dentry_open+0x144/0x3a0 path_openat+0xa57/0xda0 do_filp_open+0x9f/0x140 do_sys_openat2+0x71/0x150 __x64_sys_openat+0x78/0xa0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #4 (major_names_lock){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_nested+0x17/0x20 blkdev_show+0x19/0x80 devinfo_show+0x52/0x60 seq_read_iter+0x2d5/0x3e0 proc_reg_read_iter+0x41/0x80 vfs_read+0x2ac/0x330 ksys_read+0x6b/0xd0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #3 (&p->lock){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_nested+0x17/0x20 seq_read_iter+0x37/0x3e0 generic_file_splice_read+0xf3/0x170 splice_direct_to_actor+0x14e/0x350 do_splice_direct+0x84/0xd0 do_sendfile+0x263/0x430 __se_sys_sendfile64+0x96/0xc0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #2 (sb_writers#3){.+.+}-{0:0}: lock_acquire+0xbe/0x1f0 lo_write_bvec+0x96/0x280 [loop] loop_process_work+0xa68/0xc10 [loop] process_one_work+0x293/0x480 worker_thread+0x23d/0x4b0 kthread+0x163/0x180 ret_from_fork+0x1f/0x30 -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}: lock_acquire+0xbe/0x1f0 process_one_work+0x280/0x480 worker_thread+0x23d/0x4b0 kthread+0x163/0x180 ret_from_fork+0x1f/0x30 -> #0 ((wq_completion)loop0){+.+.}-{0:0}: validate_chain+0x1f0d/0x33e0 __lock_acquire+0x92d/0x1030 lock_acquire+0xbe/0x1f0 flush_workqueue+0x8c/0x560 drain_workqueue+0x80/0x140 destroy_workqueue+0x47/0x4f0 __loop_clr_fd+0xb4/0x400 [loop] blkdev_put+0x14a/0x1d0 blkdev_close+0x1c/0x20 __fput+0xfd/0x220 task_work_run+0x69/0xc0 exit_to_user_mode_prepare+0x1ce/0x1f0 syscall_exit_to_user_mode+0x26/0x60 do_syscall_64+0x4c/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lo->lo_mutex); lock(&disk->open_mutex); lock(&lo->lo_mutex); lock((wq_completion)loop0); *** DEADLOCK *** 2 locks held by systemd-udevd/7568: #0: ffff888012554128 (&disk->open_mutex){+.+.}-{3:3}, at: blkdev_put+0x4c/0x1d0 #1: ffff888014a7d4a0 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x4d/0x400 [loop] stack backtrace: CPU: 0 PID: 7568 Comm: systemd-udevd Tainted: G E 5.14.0+ torvalds#757 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020 Call Trace: dump_stack_lvl+0x79/0xbf print_circular_bug+0x5d6/0x5e0 ? stack_trace_save+0x42/0x60 ? save_trace+0x3d/0x2d0 check_noncircular+0x10b/0x120 validate_chain+0x1f0d/0x33e0 ? __lock_acquire+0x953/0x1030 ? __lock_acquire+0x953/0x1030 __lock_acquire+0x92d/0x1030 ? flush_workqueue+0x70/0x560 lock_acquire+0xbe/0x1f0 ? flush_workqueue+0x70/0x560 flush_workqueue+0x8c/0x560 ? flush_workqueue+0x70/0x560 ? sched_clock_cpu+0xe/0x1a0 ? drain_workqueue+0x41/0x140 drain_workqueue+0x80/0x140 destroy_workqueue+0x47/0x4f0 ? blk_mq_freeze_queue_wait+0xac/0xd0 __loop_clr_fd+0xb4/0x400 [loop] ? __mutex_unlock_slowpath+0x35/0x230 blkdev_put+0x14a/0x1d0 blkdev_close+0x1c/0x20 __fput+0xfd/0x220 task_work_run+0x69/0xc0 exit_to_user_mode_prepare+0x1ce/0x1f0 syscall_exit_to_user_mode+0x26/0x60 do_syscall_64+0x4c/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f0fd4c661f7 Code: 00 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 13 fc ff ff RSP: 002b:00007ffd1c9e9fd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 00007f0fd46be6c8 RCX: 00007f0fd4c661f7 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000006 RBP: 0000000000000006 R08: 000055fff1eaf400 R09: 0000000000000000 R10: 00007f0fd46be6c8 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000002f08 R15: 00007ffd1c9ea050 Commit 1c500ad ("loop: reduce the loop_ctl_mutex scope") is for breaking "loop_ctl_mutex => &lo->lo_mutex" dependency chain. But enabling a different block module results in forming circular locking dependency due to shared major_names_lock mutex. The simplest fix is to call probe function without holding major_names_lock [1], but Christoph Hellwig does not like such idea. Therefore, instead of holding major_names_lock in blkdev_show(), introduce a different lock for blkdev_show() in order to break "sb_writers#$N => &p->lock => major_names_lock" dependency chain. Link: https://lkml.kernel.org/r/[email protected] [1] Signed-off-by: Tetsuo Handa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>

As previously noted in commit 66e4f4a ("rtc: cmos: Use spin_lock_irqsave() in cmos_interrupt()"): <4>[ 254.192378] WARNING: inconsistent lock state <4>[ 254.192384] 5.12.0-rc1-CI-CI_DRM_9834+ #1 Not tainted <4>[ 254.192396] -------------------------------- <4>[ 254.192400] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. <4>[ 254.192409] rtcwake/5309 [HC0[0]:SC0[0]:HE1:SE1] takes: <4>[ 254.192429] ffffffff8263c5f8 (rtc_lock){?...}-{2:2}, at: cmos_interrupt+0x18/0x100 <4>[ 254.192481] {IN-HARDIRQ-W} state was registered at: <4>[ 254.192488] lock_acquire+0xd1/0x3d0 <4>[ 254.192504] _raw_spin_lock+0x2a/0x40 <4>[ 254.192519] cmos_interrupt+0x18/0x100 <4>[ 254.192536] rtc_handler+0x1f/0xc0 <4>[ 254.192553] acpi_ev_fixed_event_detect+0x109/0x13c <4>[ 254.192574] acpi_ev_sci_xrupt_handler+0xb/0x28 <4>[ 254.192596] acpi_irq+0x13/0x30 <4>[ 254.192620] __handle_irq_event_percpu+0x43/0x2c0 <4>[ 254.192641] handle_irq_event_percpu+0x2b/0x70 <4>[ 254.192661] handle_irq_event+0x2f/0x50 <4>[ 254.192680] handle_fasteoi_irq+0x9e/0x150 <4>[ 254.192693] __common_interrupt+0x76/0x140 <4>[ 254.192715] common_interrupt+0x96/0xc0 <4>[ 254.192732] asm_common_interrupt+0x1e/0x40 <4>[ 254.192750] _raw_spin_unlock_irqrestore+0x38/0x60 <4>[ 254.192767] resume_irqs+0xba/0xf0 <4>[ 254.192786] dpm_resume_noirq+0x245/0x3d0 <4>[ 254.192811] suspend_devices_and_enter+0x230/0xaa0 <4>[ 254.192835] pm_suspend.cold.8+0x301/0x34a <4>[ 254.192859] state_store+0x7b/0xe0 <4>[ 254.192879] kernfs_fop_write_iter+0x11d/0x1c0 <4>[ 254.192899] new_sync_write+0x11d/0x1b0 <4>[ 254.192916] vfs_write+0x265/0x390 <4>[ 254.192933] ksys_write+0x5a/0xd0 <4>[ 254.192949] do_syscall_64+0x33/0x80 <4>[ 254.192965] entry_SYSCALL_64_after_hwframe+0x44/0xae <4>[ 254.192986] irq event stamp: 43775 <4>[ 254.192994] hardirqs last enabled at (43775): [<ffffffff81c00c42>] asm_sysvec_apic_timer_interrupt+0x12/0x20 <4>[ 254.193023] hardirqs last disabled at (43774): [<ffffffff81aa691a>] sysvec_apic_timer_interrupt+0xa/0xb0 <4>[ 254.193049] softirqs last enabled at (42548): [<ffffffff81e00342>] __do_softirq+0x342/0x48e <4>[ 254.193074] softirqs last disabled at (42543): [<ffffffff810b45fd>] irq_exit_rcu+0xad/0xd0 <4>[ 254.193101] other info that might help us debug this: <4>[ 254.193107] Possible unsafe locking scenario: <4>[ 254.193112] CPU0 <4>[ 254.193117] ---- <4>[ 254.193121] lock(rtc_lock); <4>[ 254.193137] <Interrupt> <4>[ 254.193142] lock(rtc_lock); <4>[ 254.193156] *** DEADLOCK *** <4>[ 254.193161] 6 locks held by rtcwake/5309: <4>[ 254.193174] #0: ffff888104861430 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x5a/0xd0 <4>[ 254.193232] #1: ffff88810f823288 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xe7/0x1c0 <4>[ 254.193282] #2: ffff888100cef3c0 (kn->active#285 <7>[ 254.192706] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <4>[ 254.193307] ){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xf0/0x1c0 <4>[ 254.193333] #3: ffffffff82649fa8 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend.cold.8+0xce/0x34a <4>[ 254.193387] #4: ffffffff827a2108 (acpi_scan_lock){+.+.}-{3:3}, at: acpi_suspend_begin+0x47/0x70 <4>[ 254.193433] #5: ffff8881019ea178 (&dev->mutex){....}-{3:3}, at: device_resume+0x68/0x1e0 <4>[ 254.193485] stack backtrace: <4>[ 254.193492] CPU: 1 PID: 5309 Comm: rtcwake Not tainted 5.12.0-rc1-CI-CI_DRM_9834+ #1 <4>[ 254.193514] Hardware name: Google Soraka/Soraka, BIOS MrChromebox-4.10 08/25/2019 <4>[ 254.193524] Call Trace: <4>[ 254.193536] dump_stack+0x7f/0xad <4>[ 254.193567] mark_lock.part.47+0x8ca/0xce0 <4>[ 254.193604] __lock_acquire+0x39b/0x2590 <4>[ 254.193626] ? asm_sysvec_apic_timer_interrupt+0x12/0x20 <4>[ 254.193660] lock_acquire+0xd1/0x3d0 <4>[ 254.193677] ? cmos_interrupt+0x18/0x100 <4>[ 254.193716] _raw_spin_lock+0x2a/0x40 <4>[ 254.193735] ? cmos_interrupt+0x18/0x100 <4>[ 254.193758] cmos_interrupt+0x18/0x100 <4>[ 254.193785] cmos_resume+0x2ac/0x2d0 <4>[ 254.193813] ? acpi_pm_set_device_wakeup+0x1f/0x110 <4>[ 254.193842] ? pnp_bus_suspend+0x10/0x10 <4>[ 254.193864] pnp_bus_resume+0x5e/0x90 <4>[ 254.193885] dpm_run_callback+0x5f/0x240 <4>[ 254.193914] device_resume+0xb2/0x1e0 <4>[ 254.193942] ? pm_dev_err+0x25/0x25 <4>[ 254.193974] dpm_resume+0xea/0x3f0 <4>[ 254.194005] dpm_resume_end+0x8/0x10 <4>[ 254.194030] suspend_devices_and_enter+0x29b/0xaa0 <4>[ 254.194066] pm_suspend.cold.8+0x301/0x34a <4>[ 254.194094] state_store+0x7b/0xe0 <4>[ 254.194124] kernfs_fop_write_iter+0x11d/0x1c0 <4>[ 254.194151] new_sync_write+0x11d/0x1b0 <4>[ 254.194183] vfs_write+0x265/0x390 <4>[ 254.194207] ksys_write+0x5a/0xd0 <4>[ 254.194232] do_syscall_64+0x33/0x80 <4>[ 254.194251] entry_SYSCALL_64_after_hwframe+0x44/0xae <4>[ 254.194274] RIP: 0033:0x7f07d79691e7 <4>[ 254.194293] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 <4>[ 254.194312] RSP: 002b:00007ffd9cc2c768 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 <4>[ 254.194337] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f07d79691e7 <4>[ 254.194352] RDX: 0000000000000004 RSI: 0000556ebfc63590 RDI: 000000000000000b <4>[ 254.194366] RBP: 0000556ebfc63590 R08: 0000000000000000 R09: 0000000000000004 <4>[ 254.194379] R10: 0000556ebf0ec2a6 R11: 0000000000000246 R12: 0000000000000004 which breaks S3-resume on fi-kbl-soraka presumably as that's slow enough to trigger the alarm during the suspend. Fixes: 6950d04 ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ") References: 66e4f4a ("rtc: cmos: Use spin_lock_irqsave() in cmos_interrupt()"): Signed-off-by: Chris Wilson <[email protected]> Cc: Xiaofei Tan <[email protected]> Cc: Alexandre Belloni <[email protected]> Cc: Alessandro Zummo <[email protected]> Cc: Ville Syrjälä <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Alexandre Belloni <[email protected]> Link: https://lore.kernel.org/r/[email protected]

It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <[email protected]> CC: Milian Wolff <[email protected]> Cc: Jiri Olsa <[email protected]> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/[email protected] Reported-by: Juri Lelli <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

FD uses xyarray__entry that may return NULL if an index is out of bounds. If NULL is returned then a segv happens as FD unconditionally dereferences the pointer. This was happening in a case of with perf iostat as shown below. The fix is to make FD an "int*" rather than an int and handle the NULL case as either invalid input or a closed fd. $ sudo gdb --args perf stat --iostat list ... Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 50 { (gdb) bt #0 perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 #1 0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410, threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792 #2 0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0) at util/evsel.c:2045 #3 0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0) at util/evsel.c:2065 #4 0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0, config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590 #5 0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:833 #6 0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:1048 #7 0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534 #8 0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3, argv=0x7fffffffe4a0) at perf.c:313 #9 0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365 #10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409 #11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539 ... (gdb) c Continuing. Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/). /bin/dmesg | grep -i perf may provide additional information. Program received signal SIGSEGV, Segmentation fault. 0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166 166 if (FD(evsel, cpu, thread) >= 0) v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was backward. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

Andrii Nakryiko says: ==================== Implement opt-in stricter BPF program section name (SEC()) handling logic. For a lot of supported ELF section names, enforce exact section name match with no arbitrary characters added at the end. See patch #9 for more details. To allow this, patches #2 through #4 clean up and preventively fix selftests, normalizing existing SEC() usage across multiple selftests. While at it, those patches also reduce the amount of remaining bpf_object__find_program_by_title() uses, which should be completely removed soon, given it's an API with ambiguous semantics and will be deprecated and eventually removed in libbpf 1.0. Patch #1 also introduces SEC("tc") as an alias for SEC("classifier"). "tc" is a better and less misleading name, so patch #3 replaces all classifier* uses with nice and short SEC("tc"). Last patch is also fixing "sk_lookup/" definition to not require and not allow extra "/blah" parts after it, which serve no meaning. All the other patches are gradual internal libbpf changes to: - allow this optional strict logic for ELF section name handling; - allow new use case (for now for "struct_ops", but that could be extended to, say, freplace definitions), in which it can be used stand-alone to specify just type (SEC("struct_ops")), or also accept extra parameters which can be utilized by libbpf to either get more data or double-check valid use (e.g., SEC("struct_ops/dctcp_init") to specify desired struct_ops operation that is supposed to be implemented); - get libbpf's internal logic ready to allow other libraries and applications to specify their custom handlers for ELF section name for BPF programs. All the pieces are in place, the only thing preventing making this as public libbpf API is reliance on internal type for specifying BPF program load attributes. The work is planned to revamp related low-level libbpf APIs, at which point it will be possible to just re-use such new types for coordination between libbpf and custom handlers. These changes are a part of libbpf 1.0 effort ([0]). They are also intended to be applied on top of the previous preparatory series [1], so currently CI will be failing to apply them to bpf-next until that patch set is landed. Once it is landed, kernel-patches daemon will automatically retest this patch set. [0] https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0#stricter-and-more-uniform-bpf-program-section-name-sec-handling [1] https://patchwork.kernel.org/project/netdevbpf/list/?series=547675&state=* v3->v4: - replace SEC("classifier*") with SEC("tc") (Daniel); v2->v3: - applied acks, addressed most feedback, added comments to new flags (Dave); v1->v2: - rebase onto latest bpf-next and resolve merge conflicts w/ Dave's changes. ==================== Signed-off-by: Alexei Starovoitov <[email protected]>

…r-mode' Ido Schimmel says: ==================== ethtool: Add ability to control transceiver modules' power mode This patchset extends the ethtool netlink API to allow user space to control transceiver modules. Two specific APIs are added, but the plan is to extend the interface with more APIs in the future (see "Future plans"). This submission is a complete rework of a previous submission [1] that tried to achieve the same goal by allowing user space to write to the EEPROMs of these modules. It was rejected as it could have enabled user space binary blob drivers. However, the main issue is that by directly writing to some pages of these EEPROMs, we are interfering with the entity that is controlling the modules (kernel / device firmware). In addition, some functionality cannot be implemented solely by writing to the EEPROM, as it requires the assertion / de-assertion of hardware signals (e.g., "ResetL" pin in SFF-8636). Motivation ========== The kernel can currently dump the contents of module EEPROMs to user space via the ethtool legacy ioctl API or the new netlink API. These dumps can then be parsed by ethtool(8) according to the specification that defines the memory map of the EEPROM. For example, SFF-8636 [2] for QSFP and CMIS [3] for QSFP-DD. In addition to read-only elements, these specifications also define writeable elements that can be used to control the behavior of the module. For example, controlling whether the module is put in low or high power mode to limit its power consumption. The CMIS specification even defines a message exchange mechanism (CDB, Command Data Block) on top of the module's memory map. This allows the host to send various commands to the module. For example, to update its firmware. Implementation ============== The ethtool netlink API is extended with two new messages, 'ETHTOOL_MSG_MODULE_SET' and 'ETHTOOL_MSG_MODULE_GET', that allow user space to set and get transceiver module parameters. Specifically, the 'ETHTOOL_A_MODULE_POWER_MODE_POLICY' attribute allows user space to control the power mode policy of the module in order to limit its power consumption. See detailed description in patch #1. The user API is designed to be generic enough so that it could be used for modules with different memory maps (e.g., SFF-8636, CMIS). The only implementation of the device driver API in this series is for a MAC driver (mlxsw) where the module is controlled by the device's firmware, but it is designed to be generic enough so that it could also be used by implementations where the module is controlled by the kernel. Testing and introspection ========================= See detailed description in patches #1 and #5. Patchset overview ================= Patch #1 adds the initial infrastructure in ethtool along with the ability to control transceiver modules' power mode. Patches #2-#3 add required device registers in mlxsw. Patch #4 implements in mlxsw the ethtool operations added in patch #1. Patch #5 adds extended link states in order to allow user space to troubleshoot link down issues related to transceiver modules. Patch #6 adds support for these extended states in mlxsw. Future plans ============ * Extend 'ETHTOOL_MSG_MODULE_SET' to control Tx output among other attributes. * Add new ethtool message(s) to update firmware on transceiver modules. * Extend ethtool(8) to parse more diagnostic information from CMIS modules. No kernel changes required. [1] https://lore.kernel.org/netdev/[email protected]/ [2] https://members.snia.org/document/dl/26418 [3] http://www.qsfp-dd.com/wp-content/uploads/2021/05/CMIS5p0.pdf Previous versions: [4] https://lore.kernel.org/netdev/[email protected]/ [5] https://lore.kernel.org/netdev/[email protected]/ [6] https://lore.kernel.org/netdev/[email protected]/ [7] https://lore.kernel.org/netdev/[email protected]/ ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Pablo Neira Ayuso says: ==================== Netfilter fixes for net (v2) The following patchset contains Netfilter fixes for net: 1) Move back the defrag users fields to the global netns_nf area. Kernel fails to boot if conntrack is builtin and kernel is booted with: nf_conntrack.enable_hooks=1. From Florian Westphal. 2) Rule event notification is missing relevant context such as the position handle and the NLM_F_APPEND flag. 3) Rule replacement is expanded to add + delete using the existing rule handle, reverse order of this operation so it makes sense from rule notification standpoint. 4) Propagate to userspace the NLM_F_CREATE and NLM_F_EXCL flags from the rule notification path. Patches #2, #3 and #4 are used by 'nft monitor' and 'iptables-monitor' userspace utilities which are not correctly representing the following operations through netlink notifications: - rule insertions - rule addition/insertion from position handle - create table/chain/set/map/flowtable/... ==================== Signed-off-by: David S. Miller <[email protected]>

Ido Schimmel says: ==================== selftests: forwarding: Add ip6gre tests This patchset adds forwarding selftests for ip6gre. The tests can be run with veth pairs or with physical loopbacks. Patch #1 adds a new config option to determine if 'skip_sw' / 'skip_hw' flags are used when installing tc filters. By default, it is not set which means the flags are not used. 'skip_sw' is useful to ensure traffic is forwarded by the hardware data path. Patch #2 adds a new helper function. Patches #3-#4 add the forwarding selftests. Patch #5 adds a mlxsw-specific selftest to validate correct behavior of the 'decap_error' trap with IPv6 underlay. Patches #6-#8 align the corresponding IPv4 underlay test to the IPv6 one. ==================== Signed-off-by: David S. Miller <[email protected]>

Ido Schimmel says: ==================== mlxsw: Add support for ECN mirroring Petr says: Patches in this set have been floating around for some time now together with trap_fwd support. That will however need more work, time for which is nowhere to be found, apparently. Instead, this patchset enables offload of only packet mirroring on RED mark qevent, enabling mirroring of ECN-marked packets. Formally it enables offload of filters added to blocks bound to the RED qevent mark if: - The switch ASIC is Spectrum-2 or above. - Only a single filter is attached at the block, at chain 0 (the default), and its classifier is matchall. - The filter has hw_stats set to disabled. - The filter has a single action, which is mirror. This differs from early_drop qevent offload, which supports mirroring and trapping. However trapping in context of ECN-marked packets is not suitable, because the HW does not drop the packet, as the trap action implies. And there is as of now no way to express only the part of trapping that transfers the packet to the SW datapath, sans the HW-datapath drop. The patchset progresses as follows: Patch #1 is an extack propagation. Mirroring of ECN-marked packets is configured in the ASIC through an ECN trigger, which is considered "egress", unlike the EARLY_DROP trigger. In patch #2, add a helper to classify triggers as ingress. As clarified above, traps cannot be offloaded on mark qevent. Similarly, given a trap_fwd action, it would not be offloadable on early_drop qevent. In patch #3, introduce support for tracking actions permissible on a given block. Patch #4 actually adds the mark qevent offload. In patch #5, fix a small style issue in one of the selftests, and in patch #6 add mark offload selftests. ==================== Signed-off-by: David S. Miller <[email protected]>

Ido Schimmel says: ==================== mlxsw: Multi-level qdisc offload Petr says: Currently, mlxsw admits for offload a suitable root qdisc, and its children. Thus up to two levels of hierarchy are offloaded. Often, this is enough: one can configure TCs with RED and TCs with a shaper on, and can even see counters for each TC by looking at a qdisc at a sufficiently shallow position. While simple, the system has obvious shortcomings. It is not possible to configure both RED and shaping on one TC. It is not possible to place a PRIO below root TBF, which would then be offloaded as port shaper. FIFOs are only offloaded at root or directly below, which is confusing to users, because RED and TBF of course have their own FIFO. This patch set lifts assumptions that prevent offloading multi-level qdisc trees. In patch #1, offload of a graft operation is added to TBF. Grafts are issued as another qdisc is linked to the qdisc in question, and give drivers a chance to react to the linking. The absence of this event was not a major issue so far, because TBF was not considered classful, which changes with this patchset. The codebase currently assumes that ETS and PRIO are the only classful qdiscs. The following patches gradually lift this assumption. In patch #2, calculation of traffic class and priomap of a qdisc is fixed. Patch #3 fixes handling of future FIFOs. Child FIFO qdiscs may be created and notified before their parent qdisc exists and therefore need special handling. Patches #4, #5 and #6 unify, respectively, child destruction, child grafting, and cleanup of statistics. Patch #7 adds a function that validates whether a given qdisc topology is offloadable. Finally in patch #8, TBF and RED become classful. At this point, FIFO qdiscs grafted to an offloaded qdisc should always be offloaded. Patch #9 adds a selftest to verify some offloadable and unoffloadable qdisc trees. ==================== Signed-off-by: David S. Miller <[email protected]>

There is no devfreq on a3xx at the moment since gpu_busy is not implemented. This means that msm_devfreq_init() will return early and the entire devfreq setup is skipped. However, msm_devfreq_active() and msm_devfreq_idle() are still called unconditionally later, causing a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Internal error: Oops: 96000004 [#1] PREEMPT SMP CPU: 0 PID: 133 Comm: ring0 Not tainted 5.15.0-rc1 #4 Hardware name: Longcheer L8150 (DT) pc : mutex_lock_io+0x2bc/0x2f0 lr : msm_devfreq_active+0x3c/0xe0 [msm] Call trace: mutex_lock_io+0x2bc/0x2f0 msm_gpu_submit+0x164/0x180 [msm] msm_job_run+0x54/0xe0 [msm] drm_sched_main+0x2b0/0x4a0 [gpu_sched] kthread+0x154/0x160 ret_from_fork+0x10/0x20 Fix this by adding a check in msm_devfreq_active/idle() which ensures that devfreq was actually initialized earlier. Fixes: 9bc9557 ("drm/msm: Devfreq tuning") Reported-by: Nikita Travkin <[email protected]> Tested-by: Nikita Travkin <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>

Ido Schimmel says: ==================== mlxsw: Support multiple RIF MAC prefixes Currently, mlxsw enforces that all the netdevs used as router interfaces (RIFs) have the same MAC prefix (e.g., same 38 MSBs in Spectrum-1). Otherwise, an error is returned to user space with extack. This patchset relaxes the limitation through the use of RIF MAC profiles. A RIF MAC profile is a hardware entity that represents a particular MAC prefix which multiple RIFs can reference. Therefore, the number of possible MAC prefixes is no longer one, but the number of profiles supported by the device. The ability to change the MAC of a particular netdev is useful, for example, for users who use the netdev to connect to an upstream provider that performs MAC filtering. Currently, such users are either forced to negotiate with the provider or change the MAC address of all other netdevs so that they share the same prefix. Patchset overview: Patches #1-#3 are preparations. Patch #4 adds actual support for RIF MAC profiles. Patch #5 exposes RIF MAC profiles as a devlink resource, so that user space has visibility into the maximum number of profiles and current occupancy. Useful for debugging and testing (next 3 patches). Patches #6-#8 add both scale and functional tests. Patch #9 removes tests that validated the previous limitation. It is now covered by patch #6 for devices that support a single profile. ==================== Signed-off-by: David S. Miller <[email protected]>

We got the following lockdep splat while running fstests (specifically btrfs/003 and btrfs/020 in a row) with the new rc. This was uncovered by 87579e9 ("loop: use worker per cgroup instead of kworker") which converted loop to using workqueues, which comes with lockdep annotations that don't exist with kworkers. The lockdep splat is as follows: WARNING: possible circular locking dependency detected 5.14.0-rc2-custom+ torvalds#34 Not tainted ------------------------------------------------------ losetup/156417 is trying to acquire lock: ffff9c7645b02d38 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x84/0x600 but task is already holding lock: ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #5 (&lo->lo_mutex){+.+.}-{3:3}: __mutex_lock+0xba/0x7c0 lo_open+0x28/0x60 [loop] blkdev_get_whole+0x28/0xf0 blkdev_get_by_dev.part.0+0x168/0x3c0 blkdev_open+0xd2/0xe0 do_dentry_open+0x163/0x3a0 path_openat+0x74d/0xa40 do_filp_open+0x9c/0x140 do_sys_openat2+0xb1/0x170 __x64_sys_openat+0x54/0x90 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #4 (&disk->open_mutex){+.+.}-{3:3}: __mutex_lock+0xba/0x7c0 blkdev_get_by_dev.part.0+0xd1/0x3c0 blkdev_get_by_path+0xc0/0xd0 btrfs_scan_one_device+0x52/0x1f0 [btrfs] btrfs_control_ioctl+0xac/0x170 [btrfs] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #3 (uuid_mutex){+.+.}-{3:3}: __mutex_lock+0xba/0x7c0 btrfs_rm_device+0x48/0x6a0 [btrfs] btrfs_ioctl+0x2d1c/0x3110 [btrfs] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #2 (sb_writers#11){.+.+}-{0:0}: lo_write_bvec+0x112/0x290 [loop] loop_process_work+0x25f/0xcb0 [loop] process_one_work+0x28f/0x5d0 worker_thread+0x55/0x3c0 kthread+0x140/0x170 ret_from_fork+0x22/0x30 -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}: process_one_work+0x266/0x5d0 worker_thread+0x55/0x3c0 kthread+0x140/0x170 ret_from_fork+0x22/0x30 -> #0 ((wq_completion)loop0){+.+.}-{0:0}: __lock_acquire+0x1130/0x1dc0 lock_acquire+0xf5/0x320 flush_workqueue+0xae/0x600 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x650 [loop] lo_ioctl+0x29d/0x780 [loop] block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lo->lo_mutex); lock(&disk->open_mutex); lock(&lo->lo_mutex); lock((wq_completion)loop0); *** DEADLOCK *** 1 lock held by losetup/156417: #0: ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop] stack backtrace: CPU: 8 PID: 156417 Comm: losetup Not tainted 5.14.0-rc2-custom+ torvalds#34 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack_lvl+0x57/0x72 check_noncircular+0x10a/0x120 __lock_acquire+0x1130/0x1dc0 lock_acquire+0xf5/0x320 ? flush_workqueue+0x84/0x600 flush_workqueue+0xae/0x600 ? flush_workqueue+0x84/0x600 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x650 [loop] lo_ioctl+0x29d/0x780 [loop] ? __lock_acquire+0x3a0/0x1dc0 ? update_dl_rq_load_avg+0x152/0x360 ? lock_is_held_type+0xa5/0x120 ? find_held_lock.constprop.0+0x2b/0x80 block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f645884de6b Usually the uuid_mutex exists to protect the fs_devices that map together all of the devices that match a specific uuid. In rm_device we're messing with the uuid of a device, so it makes sense to protect that here. However in doing that it pulls in a whole host of lockdep dependencies, as we call mnt_may_write() on the sb before we grab the uuid_mutex, thus we end up with the dependency chain under the uuid_mutex being added under the normal sb write dependency chain, which causes problems with loop devices. We don't need the uuid mutex here however. If we call btrfs_scan_one_device() before we scratch the super block we will find the fs_devices and not find the device itself and return EBUSY because the fs_devices is open. If we call it after the scratch happens it will not appear to be a valid btrfs file system. We do not need to worry about other fs_devices modifying operations here because we're protected by the exclusive operations locking. So drop the uuid_mutex here in order to fix the lockdep splat. A more detailed explanation from the discussion: We are worried about rm and scan racing with each other, before this change we'll zero the device out under the UUID mutex so when scan does run it'll make sure that it can go through the whole device scan thing without rm messing with us. We aren't worried if the scratch happens first, because the result is we don't think this is a btrfs device and we bail out. The only case we are concerned with is we scratch _after_ scan is able to read the superblock and gets a seemingly valid super block, so lets consider this case. Scan will call device_list_add() with the device we're removing. We'll call find_fsid_with_metadata_uuid() and get our fs_devices for this UUID. At this point we lock the fs_devices->device_list_mutex. This is what protects us in this case, but we have two cases here. 1. We aren't to the device removal part of the RM. We found our device, and device name matches our path, we go down and we set total_devices to our super number of devices, which doesn't affect anything because we haven't done the remove yet. 2. We are past the device removal part, which is protected by the device_list_mutex. Scan doesn't find the device, it goes down and does the if (fs_devices->opened) return -EBUSY; check and we bail out. Nothing about this situation is ideal, but the lockdep splat is real, and the fix is safe, tho admittedly a bit scary looking. Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> [ copy more from the discussion ] Signed-off-by: David Sterba <[email protected]>

For device removal and replace we call btrfs_find_device_by_devspec, which if we give it a device path and nothing else will call btrfs_get_dev_args_from_path, which opens the block device and reads the super block and then looks up our device based on that. However at this point we're holding the sb write "lock", so reading the block device pulls in the dependency of ->open_mutex, which produces the following lockdep splat ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc2+ torvalds#405 Not tainted ------------------------------------------------------ losetup/11576 is trying to acquire lock: ffff9bbe8cded938 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0 but task is already holding lock: ffff9bbe88e4fc68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&lo->lo_mutex){+.+.}-{3:3}: __mutex_lock+0x7d/0x750 lo_open+0x28/0x60 [loop] blkdev_get_whole+0x25/0xf0 blkdev_get_by_dev.part.0+0x168/0x3c0 blkdev_open+0xd2/0xe0 do_dentry_open+0x161/0x390 path_openat+0x3cc/0xa20 do_filp_open+0x96/0x120 do_sys_openat2+0x7b/0x130 __x64_sys_openat+0x46/0x70 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #3 (&disk->open_mutex){+.+.}-{3:3}: __mutex_lock+0x7d/0x750 blkdev_get_by_dev.part.0+0x56/0x3c0 blkdev_get_by_path+0x98/0xa0 btrfs_get_bdev_and_sb+0x1b/0xb0 btrfs_find_device_by_devspec+0x12b/0x1c0 btrfs_rm_device+0x127/0x610 btrfs_ioctl+0x2a31/0x2e70 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #2 (sb_writers#12){.+.+}-{0:0}: lo_write_bvec+0xc2/0x240 [loop] loop_process_work+0x238/0xd00 [loop] process_one_work+0x26b/0x560 worker_thread+0x55/0x3c0 kthread+0x140/0x160 ret_from_fork+0x1f/0x30 -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}: process_one_work+0x245/0x560 worker_thread+0x55/0x3c0 kthread+0x140/0x160 ret_from_fork+0x1f/0x30 -> #0 ((wq_completion)loop0){+.+.}-{0:0}: __lock_acquire+0x10ea/0x1d90 lock_acquire+0xb5/0x2b0 flush_workqueue+0x91/0x5e0 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x660 [loop] block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lo->lo_mutex); lock(&disk->open_mutex); lock(&lo->lo_mutex); lock((wq_completion)loop0); *** DEADLOCK *** 1 lock held by losetup/11576: #0: ffff9bbe88e4fc68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop] stack backtrace: CPU: 0 PID: 11576 Comm: losetup Not tainted 5.14.0-rc2+ torvalds#405 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack_lvl+0x57/0x72 check_noncircular+0xcf/0xf0 ? stack_trace_save+0x3b/0x50 __lock_acquire+0x10ea/0x1d90 lock_acquire+0xb5/0x2b0 ? flush_workqueue+0x67/0x5e0 ? lockdep_init_map_type+0x47/0x220 flush_workqueue+0x91/0x5e0 ? flush_workqueue+0x67/0x5e0 ? verify_cpu+0xf0/0x100 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x660 [loop] ? blkdev_ioctl+0x8d/0x2a0 block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f31b02404cb Instead what we want to do is populate our device lookup args before we grab any locks, and then pass these args into btrfs_rm_device(). From there we can find the device and do the appropriate removal. Suggested-by: Anand Jain <[email protected]> Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Signed-off-by: David Sterba <[email protected]>

Attempting to defragment a Btrfs file containing a transparent huge page immediately deadlocks with the following stack trace: #0 context_switch (kernel/sched/core.c:4940:2) #1 __schedule (kernel/sched/core.c:6287:8) #2 schedule (kernel/sched/core.c:6366:3) #3 io_schedule (kernel/sched/core.c:8389:2) #4 wait_on_page_bit_common (mm/filemap.c:1356:4) #5 __lock_page (mm/filemap.c:1648:2) #6 lock_page (./include/linux/pagemap.h:625:3) #7 pagecache_get_page (mm/filemap.c:1910:4) #8 find_or_create_page (./include/linux/pagemap.h:420:9) #9 defrag_prepare_one_page (fs/btrfs/ioctl.c:1068:9) #10 defrag_one_range (fs/btrfs/ioctl.c:1326:14) #11 defrag_one_cluster (fs/btrfs/ioctl.c:1421:9) #12 btrfs_defrag_file (fs/btrfs/ioctl.c:1523:9) #13 btrfs_ioctl_defrag (fs/btrfs/ioctl.c:3117:9) #14 btrfs_ioctl (fs/btrfs/ioctl.c:4872:10) #15 vfs_ioctl (fs/ioctl.c:51:10) #16 __do_sys_ioctl (fs/ioctl.c:874:11) #17 __se_sys_ioctl (fs/ioctl.c:860:1) #18 __x64_sys_ioctl (fs/ioctl.c:860:1) #19 do_syscall_x64 (arch/x86/entry/common.c:50:14) #20 do_syscall_64 (arch/x86/entry/common.c:80:7) #21 entry_SYSCALL_64+0x7c/0x15b (arch/x86/entry/entry_64.S:113) A huge page is represented by a compound page, which consists of a struct page for each PAGE_SIZE page within the huge page. The first struct page is the "head page", and the remaining are "tail pages". Defragmentation attempts to lock each page in the range. However, lock_page() on a tail page actually locks the corresponding head page. So, if defragmentation tries to lock more than one struct page in a compound page, it tries to lock the same head page twice and deadlocks with itself. Ideally, we should be able to defragment transparent huge pages. However, THP for filesystems is currently read-only, so a lot of code is not ready to use huge pages for I/O. For now, let's just return ETXTBUSY. This can be reproduced with the following on a kernel with CONFIG_READ_ONLY_THP_FOR_FS=y: $ cat create_thp_file.c #include <fcntl.h> #include <stdbool.h> #include <stdio.h> #include <stdint.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> static const char zeroes[1024 * 1024]; static const size_t FILE_SIZE = 2 * 1024 * 1024; int main(int argc, char **argv) { if (argc != 2) { fprintf(stderr, "usage: %s PATH\n", argv[0]); return EXIT_FAILURE; } int fd = creat(argv[1], 0777); if (fd == -1) { perror("creat"); return EXIT_FAILURE; } size_t written = 0; while (written < FILE_SIZE) { ssize_t ret = write(fd, zeroes, sizeof(zeroes) < FILE_SIZE - written ? sizeof(zeroes) : FILE_SIZE - written); if (ret < 0) { perror("write"); return EXIT_FAILURE; } written += ret; } close(fd); fd = open(argv[1], O_RDONLY); if (fd == -1) { perror("open"); return EXIT_FAILURE; } /* * Reserve some address space so that we can align the file mapping to * the huge page size. */ void *placeholder_map = mmap(NULL, FILE_SIZE * 2, PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (placeholder_map == MAP_FAILED) { perror("mmap (placeholder)"); return EXIT_FAILURE; } void *aligned_address = (void *)(((uintptr_t)placeholder_map + FILE_SIZE - 1) & ~(FILE_SIZE - 1)); void *map = mmap(aligned_address, FILE_SIZE, PROT_READ | PROT_EXEC, MAP_SHARED | MAP_FIXED, fd, 0); if (map == MAP_FAILED) { perror("mmap"); return EXIT_FAILURE; } if (madvise(map, FILE_SIZE, MADV_HUGEPAGE) < 0) { perror("madvise"); return EXIT_FAILURE; } char *line = NULL; size_t line_capacity = 0; FILE *smaps_file = fopen("/proc/self/smaps", "r"); if (!smaps_file) { perror("fopen"); return EXIT_FAILURE; } for (;;) { for (size_t off = 0; off < FILE_SIZE; off += 4096) ((volatile char *)map)[off]; ssize_t ret; bool this_mapping = false; while ((ret = getline(&line, &line_capacity, smaps_file)) > 0) { unsigned long start, end, huge; if (sscanf(line, "%lx-%lx", &start, &end) == 2) { this_mapping = (start <= (uintptr_t)map && (uintptr_t)map < end); } else if (this_mapping && sscanf(line, "FilePmdMapped: %ld", &huge) == 1 && huge > 0) { return EXIT_SUCCESS; } } sleep(6); rewind(smaps_file); fflush(smaps_file); } } $ ./create_thp_file huge $ btrfs fi defrag -czstd ./huge Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

Convert the netfs helper library to use folios throughout, convert the 9p and afs filesystems to use folios in their file I/O paths and convert the ceph filesystem to use just enough folios to compile. With these changes, afs passes -g quick xfstests. Changes ======= ver #5: - Got rid of folio_end{io,_read,_write}() and inlined the stuff it does instead (Willy decided he didn't want this after all). ver #4: - Fixed a bug in afs_redirty_page() whereby it didn't set the next page index in the loop and returned too early. - Simplified a check in v9fs_vfs_write_folio_locked()[1]. - Undid a change to afs_symlink_readpage()[1]. - Used offset_in_folio() in afs_write_end()[1]. - Changed from using page_endio() to folio_end{io,_read,_write}()[1]. ver #2: - Add 9p foliation. Signed-off-by: David Howells <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Tested-by: Jeff Layton <[email protected]> Tested-by: Dominique Martinet <[email protected]> Tested-by: [email protected] cc: Matthew Wilcox (Oracle) <[email protected]> cc: Marc Dionne <[email protected]> cc: Ilya Dryomov <[email protected]> cc: Dominique Martinet <[email protected]> cc: [email protected] cc: [email protected] cc: [email protected] cc: [email protected] Link: https://lore.kernel.org/r/YYKa3bfQZxK5/[email protected]/ [1] Link: https://lore.kernel.org/r/[email protected]/ # rfc Link: https://lore.kernel.org/r/162877311459.3085614.10601478228012245108.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/162981153551.1901565.3124454657133703341.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/163005745264.2472992.9852048135392188995.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163584187452.4023316.500389675405550116.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/163649328026.309189.1124218109373941936.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/163657852454.834781.9265101983152100556.stgit@warthog.procyon.org.uk/ # v5

The exit function fixes a memory leak with the src field as detected by leak sanitizer. An example of which is: Indirect leak of 25133184 byte(s) in 207 object(s) allocated from: #0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803 #2 0x55defe6397e4 in symbol__hists util/annotate.c:952 #3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968 #4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119 #5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182 #6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236 #7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315 #8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473 #9 0x55defe731e38 in machines__deliver_event util/session.c:1510 #10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590 #11 0x55defe72951e in ordered_events__deliver_event util/session.c:183 #12 0x55defe740082 in do_flush util/ordered-events.c:244 #13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323 #14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341 #15 0x55defe73837f in __perf_session__process_events util/session.c:2390 #16 0x55defe7385ff in perf_session__process_events util/session.c:2420 ... Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin Liška <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

[BUG] The following script can cause btrfs to crash: $ mount -o compress-force=lzo $DEV /mnt $ dd if=/dev/urandom of=/mnt/foo bs=4k count=1 $ sync The call trace looks like this: general protection fault, probably for non-canonical address 0xe04b37fccce3b000: 0000 [#1] PREEMPT SMP NOPTI CPU: 5 PID: 164 Comm: kworker/u20:3 Not tainted 5.15.0-rc7-custom+ #4 Workqueue: btrfs-delalloc btrfs_work_helper [btrfs] RIP: 0010:__memcpy+0x12/0x20 Call Trace: lzo_compress_pages+0x236/0x540 [btrfs] btrfs_compress_pages+0xaa/0xf0 [btrfs] compress_file_range+0x431/0x8e0 [btrfs] async_cow_start+0x12/0x30 [btrfs] btrfs_work_helper+0xf6/0x3e0 [btrfs] process_one_work+0x294/0x5d0 worker_thread+0x55/0x3c0 kthread+0x140/0x170 ret_from_fork+0x22/0x30 ---[ end trace 63c3c0f131e61982 ]--- [CAUSE] In lzo_compress_pages(), parameter @out_pages is not only an output parameter (for the number of compressed pages), but also an input parameter, as the upper limit of compressed pages we can utilize. In commit d408880 ("btrfs: subpage: make lzo_compress_pages() compatible"), the refactoring doesn't take @out_pages as an input, thus completely ignoring the limit. And for compress-force case, we could hit incompressible data that compressed size would go beyond the page limit, and cause the above crash. [FIX] Save @out_pages as @max_nr_page, and pass it to lzo_compress_pages(), and check if we're beyond the limit before accessing the pages. Note: this also fixes crash on 32bit architectures that was suspected to be caused by merge of btrfs patches to 5.16-rc1. Reported in https://lore.kernel.org/all/[email protected]/ . Reported-by: Omar Sandoval <[email protected]> Fixes: d408880 ("btrfs: subpage: make lzo_compress_pages() compatible") Reviewed-by: Omar Sandoval <[email protected]> Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> [ add note ] Signed-off-by: David Sterba <[email protected]>

Line 1169 (#3) allocates a memory chunk for victim_name by kmalloc(), but when the function returns in line 1184 (#4) victim_name allocated by line 1169 (#3) is not freed, which will lead to a memory leak. There is a similar snippet of code in this function as allocating a memory chunk for victim_name in line 1104 (#1) as well as releasing the memory in line 1116 (#2). We should kfree() victim_name when the return value of backref_in_log() is less than zero and before the function returns in line 1184 (#4). 1057 static inline int __add_inode_ref(struct btrfs_trans_handle *trans, 1058 struct btrfs_root *root, 1059 struct btrfs_path *path, 1060 struct btrfs_root *log_root, 1061 struct btrfs_inode *dir, 1062 struct btrfs_inode *inode, 1063 u64 inode_objectid, u64 parent_objectid, 1064 u64 ref_index, char *name, int namelen, 1065 int *search_done) 1066 { 1104 victim_name = kmalloc(victim_name_len, GFP_NOFS); // #1: kmalloc (victim_name-1) 1105 if (!victim_name) 1106 return -ENOMEM; 1112 ret = backref_in_log(log_root, &search_key, 1113 parent_objectid, victim_name, 1114 victim_name_len); 1115 if (ret < 0) { 1116 kfree(victim_name); // #2: kfree (victim_name-1) 1117 return ret; 1118 } else if (!ret) { 1169 victim_name = kmalloc(victim_name_len, GFP_NOFS); // #3: kmalloc (victim_name-2) 1170 if (!victim_name) 1171 return -ENOMEM; 1180 ret = backref_in_log(log_root, &search_key, 1181 parent_objectid, victim_name, 1182 victim_name_len); 1183 if (ret < 0) { 1184 return ret; // #4: missing kfree (victim_name-2) 1185 } else if (!ret) { 1241 return 0; 1242 } Fixes: d3316c8 ("btrfs: Properly handle backref_in_log retval") CC: [email protected] # 5.10+ Reviewed-by: Qu Wenruo <[email protected]> Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Jianglei Nie <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

The fixed commit attempts to close inject.output even if it was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 48 iofclose.c: No such file or directory. (gdb) bt #0 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 #1 0x0000557fc7b74f92 in perf_data__close (data=data@entry=0x7ffcdafa6578) at util/data.c:376 #2 0x0000557fc7a6b807 in cmd_inject (argc=<optimized out>, argv=<optimized out>) at builtin-inject.c:1085 #3 0x0000557fc7ac4783 in run_builtin (p=0x557fc8074878 <commands+600>, argc=4, argv=0x7ffcdafb6a60) at perf.c:313 #4 0x0000557fc7a25d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #5 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #6 main (argc=4, argv=0x7ffcdafb6a60) at perf.c:539 (gdb) Fixes: 02e6246 ("perf inject: Close inject.output on exit") Signed-off-by: Adrian Hunter <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The fixed commit attempts to get the output file descriptor even if the file was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. __GI___fileno (fp=0x0) at fileno.c:35 35 fileno.c: No such file or directory. (gdb) bt #0 __GI___fileno (fp=0x0) at fileno.c:35 #1 0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72 #2 perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69 #3 cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017 #4 0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313 #5 0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #6 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #7 main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539 (gdb) Fixes: 0ae0389 ("perf tools: Pass a fd to perf_file_header__read_pipe()") Signed-off-by: Adrian Hunter <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

Ido Schimmel says: ==================== mlxsw: devlink health reporter extensions This patchset extends the devlink health reporter registered by mlxsw to report new health events and their related parameters. These are meant to aid in debugging hardware and firmware issues. Patches #1-#2 are preparations. Patch #3 adds the definitions of the new events and parameters. Patch #4 extends the health reporter to report the new events and parameters. ==================== Signed-off-by: David S. Miller <[email protected]>

Amit Cohen says: ==================== Add tests for VxLAN with IPv6 underlay mlxsw driver lately added support for VxLAN with IPv6 underlay. This set adds the relevant tests for IPv6, most of them are same to IPv4 tests with the required changes. Patch set overview: Patch #1 relaxes requirements for offloading TC filters that match on 802.1q fields. The following selftests make use of these newly-relaxed filters. Patch #2 adds preparation as part of selftests API, which will be used later. Patches #3-#4 add tests for VxLAN with bridge aware and unaware. Patche #5 cleans unused function. Patches #6-#7 add tests for VxLAN symmetric and asymmetric. Patch #8 adds test for Q-in-VNI. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Petr Machata says: ==================== Allow configuration of multipath hash seed Let me just quote the commit message of patch #2 here to inform the motivation and some of the implementation: When calculating hashes for the purpose of multipath forwarding, both IPv4 and IPv6 code currently fall back on flow_hash_from_keys(). That uses a randomly-generated seed. That's a fine choice by default, but unfortunately some deployments may need a tighter control over the seed used. In this patchset, make the seed configurable by adding a new sysctl key, net.ipv4.fib_multipath_hash_seed to control the seed. This seed is used specifically for multipath forwarding and not for the other concerns that flow_hash_from_keys() is used for, such as queue selection. Expose the knob as sysctl because other such settings, such as headers to hash, are also handled that way. Despite being placed in the net.ipv4 namespace, the multipath seed sysctl is used for both IPv4 and IPv6, similarly to e.g. a number of TCP variables. Like those, the multipath hash seed is a per-netns variable. The seed used by flow_hash_from_keys() is a 128-bit quantity. However it seems that usually the seed is a much more modest value. 32 bits seem typical (Cisco, Cumulus), some systems go even lower. For that reason, and to decouple the user interface from implementation details, go with a 32-bit quantity, which is then quadruplicated to form the siphash key. One example of use of this interface is avoiding hash polarization, where two ECMP routers, one behind the other, happen to make consistent hashing decisions, and as a result, part of the ECMP space of the latter router is never used. Another is a load balancer where several machines forward traffic to one of a number of leaves, and the forwarding decisions need to be made consistently. (This is a case of a desired hash polarization, mentioned e.g. in chapter 6.3 of [0].) There has already been a proposal to include a hash seed control interface in the past[1]. - Patches #1-#2 contain the substance of the work - Patch #3 is an mlxsw offload - Patches #4 and #5 are a selftest [0] https://www.usenix.org/system/files/conference/nsdi18/nsdi18-araujo.pdf [1] https://lore.kernel.org/netdev/YIlVpYMCn%2F8WfE1P@rnd/ ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

With commit c4cb231 ("iommu/amd: Add support for enable/disable IOPF") we are hitting below issue. This happens because in IOPF enablement path it holds spin lock with irq disable and then tries to take mutex lock. dmesg: ----- [ 0.938739] ============================= [ 0.938740] [ BUG: Invalid wait context ] [ 0.938742] 6.10.0-rc1+ #1 Not tainted [ 0.938745] ----------------------------- [ 0.938746] swapper/0/1 is trying to lock: [ 0.938748] ffffffff8c9f01d8 (&port_lock_key){....}-{3:3}, at: serial8250_console_write+0x78/0x4a0 [ 0.938767] other info that might help us debug this: [ 0.938768] context-{5:5} [ 0.938769] 7 locks held by swapper/0/1: [ 0.938772] #0: ffff888101a91310 (&group->mutex){+.+.}-{4:4}, at: bus_iommu_probe+0x70/0x160 [ 0.938790] #1: ffff888101d1f1b8 (&domain->lock){....}-{3:3}, at: amd_iommu_attach_device+0xa5/0x700 [ 0.938799] #2: ffff888101cc3d18 (&dev_data->lock){....}-{3:3}, at: amd_iommu_attach_device+0xc5/0x700 [ 0.938806] #3: ffff888100052830 (&iommu->lock){....}-{2:2}, at: amd_iommu_iopf_add_device+0x3f/0xa0 [ 0.938813] #4: ffffffff8945a340 (console_lock){+.+.}-{0:0}, at: _printk+0x48/0x50 [ 0.938822] #5: ffffffff8945a390 (console_srcu){....}-{0:0}, at: console_flush_all+0x58/0x4e0 [ 0.938867] #6: ffffffff82459f80 (console_owner){....}-{0:0}, at: console_flush_all+0x1f0/0x4e0 [ 0.938872] stack backtrace: [ 0.938874] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc1+ #1 [ 0.938877] Hardware name: HP HP EliteBook 745 G3/807E, BIOS N73 Ver. 01.39 04/16/2019 Fix above issue by re-arranging code in attach device path: - move device PASID/IOPF enablement outside lock in AMD IOMMU driver. This is safe as core layer holds group->mutex lock before calling iommu_ops->attach_dev. Reported-by: Borislav Petkov <[email protected]> Reported-by: Mikhail Gavrilov <[email protected]> Reported-by: Chris Bainbridge <[email protected]> Fixes: c4cb231 ("iommu/amd: Add support for enable/disable IOPF") Tested-by: Borislav Petkov <[email protected]> Tested-by: Chris Bainbridge <[email protected]> Tested-by: Mikhail Gavrilov <[email protected]> Signed-off-by: Vasant Hegde <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>

…PLES event" This reverts commit 7d1405c. This causes segfaults in some cases, as reported by Milian: ``` sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e raw_syscalls:sys_enter ls ... [ perf record: Woken up 3 times to write data ] malloc(): invalid next size (unsorted) Aborted ``` Backtrace with GDB + debuginfod: ``` malloc(): invalid next size (unsorted) Thread 1 "perf" received signal SIGABRT, Aborted. __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c 44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO (ret) : 0; (gdb) bt #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 #1 0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>, signo=6) at pthread_kill.c:78 #2 0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/ raise.c:26 #3 0x00007ffff6e384c3 in __GI_abort () at abort.c:79 #4 0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea "%s\n") at ../sysdeps/posix/libc_fatal.c:132 #5 0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850 "malloc(): invalid next size (unsorted)") at malloc.c:5772 #6 0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0 <main_arena>, bytes=bytes@entry=368) at malloc.c:4081 #7 0x00007ffff6eb877e in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3754 #8 0x000055555569bdb6 in perf_session.do_write_header () #9 0x00005555555a373a in __cmd_record.constprop.0 () #10 0x00005555555a6846 in cmd_record () #11 0x000055555564db7f in run_builtin () #12 0x000055555558ed77 in main () ``` Valgrind memcheck: ``` ==45136== Invalid write of size 8 ==45136== at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf) ==45136== by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ==45136== Syscall param write(buf) points to unaddressable byte(s) ==45136== at 0x575953D: __libc_write (write.c:26) ==45136== by 0x575953D: write (write.c:24) ==45136== by 0x35761F: ion (in /usr/bin/perf) ==45136== by 0x357778: writen (in /usr/bin/perf) ==45136== by 0x1548F7: record__write (in /usr/bin/perf) ==45136== by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ----- Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/ Reported-by: Milian Wolff <[email protected]> Tested-by: Milian Wolff <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] # 6.8+ Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1 Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Signed-off-by: David Sterba <[email protected]>

The frame pointer unwinder relies on a standard layout of the stack frame, consisting of (in downward order) Calling frame: PC <---------+ LR | SP | FP | .. locals .. | Callee frame: | PC | LR | SP | FP ----------+ where after storing its previous value on the stack, FP is made to point at the location of PC in the callee stack frame, using the canonical prologue: mov ip, sp stmdb sp!, {fp, ip, lr, pc} sub fp, ip, #4 The ftrace code assumes that this activation record is pushed first, and that any stack space for locals is allocated below this. Strict adherence to this would imply that the caller's value of SP at the time of the function call can always be obtained by adding 4 to FP (which points to PC in the callee frame). However, recent versions of GCC appear to deviate from this rule, and so the only reliable way to obtain the caller's value of SP is to read it from the activation record. Since this involves a read from memory rather than simple arithmetic, we need to use the uaccess API here which protects against inadvertent data aborts resulting from attempts to dereference bogus FP values. The plain uaccess API is ftrace instrumented itself, so to avoid unbounded recursion, use the __get_kernel_nofault() primitive directly. Closes: https://lore.kernel.org/all/alp44tukzo6mvcwl4ke4ehhmojrqnv6xfcdeuliybxfjfvgd3e@gpjvwj33cc76 Closes: https://lore.kernel.org/all/[email protected]/ Reported-by: Uwe Kleine-König <[email protected]> Reported-by: Justin Chen <[email protected]> Tested-by: Thorsten Scherer <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Russell King (Oracle) <[email protected]>

Petr Machata says: ==================== mlxsw: Handle MTU values Amit Cohen writes: The driver uses two values for maximum MTU, but neither is accurate. In addition, the value which is configured to hardware is not calculated correctly. Handle these issues and expose accurate values for minimum and maximum MTU per netdevice. Add test cases to check that the exposed values are really supported. Patch set overview: Patches #1-#3 set the driver to use accurate values for MTU Patch #4 aligns the driver to always use the same value for maximum MTU Patch #5 adds a test ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Petr Machata says: ==================== mlxsw: Use page pool for Rx buffers allocation Amit Cohen writes: After using NAPI to process events from hardware, the next step is to use page pool for Rx buffers allocation, which is also enhances performance. To simplify this change, first use page pool to allocate one continuous buffer for each packet, later memory consumption can be improved by using fragmented buffers. This set significantly enhances mlxsw driver performance, CPU can handle about 370% of the packets per second it previously handled. The next planned improvement is using XDP to optimize telemetry. Patch set overview: Patches #1-#2 are small preparations for page pool usage Patch #3 initializes page pool, but do not use it Patch #4 converts the driver to use page pool for buffers allocations Patch #5 is an optimization for buffer access Patch #6 cleans up an unused structure Patch #7 uses napi_consume_skb() as part of Tx completion ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). Signed-off-by: Alan Stern <[email protected]> Suggested-by: Greg KH <[email protected]> Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Fixes: 9908a32 ("USB: remove err() macro from usb class drivers") Link: https://lore.kernel.org/linux-usb/[email protected]/ Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 fixes the suspicious RCU usage warning that resulted from the recent fix for the race between namespace cleanup and gc in ipset left out checking the pernet exit phase when calling rcu_dereference_protected(), from Jozsef Kadlecsik. Patch #2 fixes incorrect input and output netdevice in SRv6 prerouting hooks, from Jianguo Wu. Patch #3 moves nf_hooks_lwtunnel sysctl toggle to the netfilter core. The connection tracking system is loaded on-demand, this ensures availability of this knob regardless. Patch #4-#5 adds selftests for SRv6 netfilter hooks also from Jianguo Wu. netfilter pull request 24-06-19 * tag 'nf-24-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: add selftest for the SRv6 End.DX6 behavior with netfilter selftests: add selftest for the SRv6 End.DX4 behavior with netfilter netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors netfilter: ipset: Fix suspicious rcu_dereference_protected() ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

Shin'ichiro reported that when he's running fstests' test-case btrfs/167 on emulated zoned devices, he's seeing the following NULL pointer dereference in 'btrfs_zone_finish_endio()': Oops: general protection fault, probably for non-canonical address 0xdffffc0000000011: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f] CPU: 4 PID: 2332440 Comm: kworker/u80:15 Tainted: G W 6.10.0-rc2-kts+ #4 Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] RSP: 0018:ffff88867f107a90 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff893e5534 RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088 RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed1081696028 R10: ffff88840b4b0143 R11: ffff88834dfff600 R12: ffff88840b4b0000 R13: 0000000000020000 R14: 0000000000000000 R15: ffff888530ad5210 FS: 0000000000000000(0000) GS:ffff888e3f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f87223fff38 CR3: 00000007a7c6a002 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die_addr+0x46/0x70 ? exc_general_protection+0x14f/0x250 ? asm_exc_general_protection+0x26/0x30 ? do_raw_read_unlock+0x44/0x70 ? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] btrfs_finish_one_ordered+0x5d9/0x19a0 [btrfs] ? __pfx_lock_release+0x10/0x10 ? do_raw_write_lock+0x90/0x260 ? __pfx_do_raw_write_lock+0x10/0x10 ? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs] ? _raw_write_unlock+0x23/0x40 ? btrfs_finish_ordered_zoned+0x5a9/0x850 [btrfs] ? lock_acquire+0x435/0x500 btrfs_work_helper+0x1b1/0xa70 [btrfs] ? __schedule+0x10a8/0x60b0 ? __pfx___might_resched+0x10/0x10 process_one_work+0x862/0x1410 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5e6/0x1010 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c3/0x3a0 ? trace_irq_enable.constprop.0+0xce/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Enabling CONFIG_BTRFS_ASSERT revealed the following assertion to trigger: assertion failed: !list_empty(&ordered->list), in fs/btrfs/zoned.c:1815 This indicates, that we're missing the checksums list on the ordered_extent. As btrfs/167 is doing a NOCOW write this is to be expected. Further analysis with drgn confirmed the assumption: >>> inode = prog.crashed_thread().stack_trace()[11]['ordered'].inode >>> btrfs_inode = drgn.container_of(inode, "struct btrfs_inode", \ "vfs_inode") >>> print(btrfs_inode.flags) (u32)1 As zoned emulation mode simulates conventional zones on regular devices, we cannot use zone-append for writing. But we're only attaching dummy checksums if we're doing a zone-append write. So for NOCOW zoned data writes on conventional zones, also attach a dummy checksum. Reported-by: Shinichiro Kawasaki <[email protected]> Fixes: cbfce4c ("btrfs: optimize the logical to physical mapping for zoned writes") CC: Naohiro Aota <[email protected]> # 6.6+ Tested-by: Shin'ichiro Kawasaki <[email protected]> Reviewed-by: Naohiro Aota <[email protected]> Signed-off-by: Johannes Thumshirn <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

Luis has been reporting an assert failure when freeing an inode cluster during inode inactivation for a while. The assert looks like: XFS: Assertion failed: bp->b_flags & XBF_DONE, file: fs/xfs/xfs_trans_buf.c, line: 241 ------------[ cut here ]------------ kernel BUG at fs/xfs/xfs_message.c:102! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 4 PID: 73 Comm: kworker/4:1 Not tainted 6.10.0-rc1 #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: xfs-inodegc/loop5 xfs_inodegc_worker [xfs] RIP: 0010:assfail (fs/xfs/xfs_message.c:102) xfs RSP: 0018:ffff88810188f7f0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff88816e748250 RCX: 1ffffffff844b0e7 RDX: 0000000000000004 RSI: ffff88810188f558 RDI: ffffffffc2431fa0 RBP: 1ffff11020311f01 R08: 0000000042431f9f R09: ffffed1020311e9b R10: ffff88810188f4df R11: ffffffffac725d70 R12: ffff88817a3f4000 R13: ffff88812182f000 R14: ffff88810188f998 R15: ffffffffc2423f80 FS: 0000000000000000(0000) GS:ffff8881c8400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fe9d0f109c CR3: 000000014426c002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> xfs_trans_read_buf_map (fs/xfs/xfs_trans_buf.c:241 (discriminator 1)) xfs xfs_imap_to_bp (fs/xfs/xfs_trans.h:210 fs/xfs/libxfs/xfs_inode_buf.c:138) xfs xfs_inode_item_precommit (fs/xfs/xfs_inode_item.c:145) xfs xfs_trans_run_precommits (fs/xfs/xfs_trans.c:931) xfs __xfs_trans_commit (fs/xfs/xfs_trans.c:966) xfs xfs_inactive_ifree (fs/xfs/xfs_inode.c:1811) xfs xfs_inactive (fs/xfs/xfs_inode.c:2013) xfs xfs_inodegc_worker (fs/xfs/xfs_icache.c:1841 fs/xfs/xfs_icache.c:1886) xfs process_one_work (kernel/workqueue.c:3231) worker_thread (kernel/workqueue.c:3306 (discriminator 2) kernel/workqueue.c:3393 (discriminator 2)) kthread (kernel/kthread.c:389) ret_from_fork (arch/x86/kernel/process.c:147) ret_from_fork_asm (arch/x86/entry/entry_64.S:257) </TASK> And occurs when the the inode precommit handlers is attempt to look up the inode cluster buffer to attach the inode for writeback. The trail of logic that I can reconstruct is as follows. 1. the inode is clean when inodegc runs, so it is not attached to a cluster buffer when precommit runs. 2. #1 implies the inode cluster buffer may be clean and not pinned by dirty inodes when inodegc runs. 3. #2 implies that the inode cluster buffer can be reclaimed by memory pressure at any time. 4. The assert failure implies that the cluster buffer was attached to the transaction, but not marked done. It had been accessed earlier in the transaction, but not marked done. 5. #4 implies the cluster buffer has been invalidated (i.e. marked stale). 6. #5 implies that the inode cluster buffer was instantiated uninitialised in the transaction in xfs_ifree_cluster(), which only instantiates the buffers to invalidate them and never marks them as done. Given factors 1-3, this issue is highly dependent on timing and environmental factors. Hence the issue can be very difficult to reproduce in some situations, but highly reliable in others. Luis has an environment where it can be reproduced easily by g/531 but, OTOH, I've reproduced it only once in ~2000 cycles of g/531. I think the fix is to have xfs_ifree_cluster() set the XBF_DONE flag on the cluster buffers, even though they may not be initialised. The reasons why I think this is safe are: 1. A buffer cache lookup hit on a XBF_STALE buffer will clear the XBF_DONE flag. Hence all future users of the buffer know they have to re-initialise the contents before use and mark it done themselves. 2. xfs_trans_binval() sets the XFS_BLI_STALE flag, which means the buffer remains locked until the journal commit completes and the buffer is unpinned. Hence once marked XBF_STALE/XFS_BLI_STALE by xfs_ifree_cluster(), the only context that can access the freed buffer is the currently running transaction. 3. #2 implies that future buffer lookups in the currently running transaction will hit the transaction match code and not the buffer cache. Hence XBF_STALE and XFS_BLI_STALE will not be cleared unless the transaction initialises and logs the buffer with valid contents again. At which point, the buffer will be marked marked XBF_DONE again, so having XBF_DONE already set on the stale buffer is a moot point. 4. #2 also implies that any concurrent access to that cluster buffer will block waiting on the buffer lock until the inode cluster has been fully freed and is no longer an active inode cluster buffer. 5. #4 + #1 means that any future user of the disk range of that buffer will always see the range of disk blocks covered by the cluster buffer as not done, and hence must initialise the contents themselves. 6. Setting XBF_DONE in xfs_ifree_cluster() then means the unlinked inode precommit code will see a XBF_DONE buffer from the transaction match as it expects. It can then attach the stale but newly dirtied inode to the stale but newly dirtied cluster buffer without unexpected failures. The stale buffer will then sail through the journal and do the right thing with the attached stale inode during unpin. Hence the fix is just one line of extra code. The explanation of why we have to set XBF_DONE in xfs_ifree_cluster, OTOH, is long and complex.... Fixes: 82842fe ("xfs: fix AGF vs inode cluster buffer deadlock") Signed-off-by: Dave Chinner <[email protected]> Tested-by: Luis Chamberlain <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Chandan Babu R <[email protected]>

The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

Danielle Ratson says: ==================== Add ability to flash modules' firmware CMIS compliant modules such as QSFP-DD might be running a firmware that can be updated in a vendor-neutral way by exchanging messages between the host and the module as described in section 7.2.2 of revision 4.0 of the CMIS standard. According to the CMIS standard, the firmware update process is done using a CDB commands sequence. CDB (Command Data Block Message Communication) reads and writes are performed on memory map pages 9Fh-AFh according to the CMIS standard, section 8.12 of revision 4.0. Add a pair of new ethtool messages that allow: * User space to trigger firmware update of transceiver modules * The kernel to notify user space about the progress of the process The user interface is designed to be asynchronous in order to avoid RTNL being held for too long and to allow several modules to be updated simultaneously. The interface is designed with CMIS compliant modules in mind, but kept generic enough to accommodate future use cases, if these arise. The kernel interface that will implement the firmware update using CDB command will include 2 layers that will be added under ethtool: * The upper layer that will be triggered from the module layer, is cmis_ fw_update. * The lower one is cmis_cdb. In the future there might be more operations to implement using CDB commands. Therefore, the idea is to keep the cmis_cdb interface clean and the cmis_fw_update specific to the cdb commands handling it. The communication between the kernel and the driver will be done using two ethtool operations that enable reading and writing the transceiver module EEPROM. The operation ethtool_ops::get_module_eeprom_by_page, that is already implemented, will be used for reading from the EEPROM the CDB reply, e.g. reading module setting, state, etc. The operation ethtool_ops::set_module_eeprom_by_page, that is added in the current patchset, will be used for writing to the EEPROM the CDB command such as start firmware image, run firmware image, etc. Therefore in order for a driver to implement module flashing, that driver needs to implement the two functions mentioned above. Patchset overview: Patch #1-#2: Implement the EEPROM writing in mlxsw. Patch #3: Define the interface between the kernel and user space. Patch #4: Add ability to notify the flashing firmware progress. Patch #5: Veto operations during flashing. Patch #6: Add extended compliance codes. Patch #7: Add the cdb layer. Patch #8: Add the fw_update layer. Patch #9: Add ability to flash transceiver modules' firmware. v8: Patch #7: * In the ethtool_cmis_wait_for_cond() evaluate the condition once more to decide if the error code should be -ETIMEDOUT or something else. * s/netdev_err/netdev_err_once. v7: Patch #4: * Return -ENOMEM instead of PTR_ERR(attr) on ethnl_module_fw_flash_ntf_put_err(). Patch #9: * Fix Warning for not unlocking the spin_lock in the error flow on module_flash_fw_work_list_add(). * Avoid the fall-through on ethnl_sock_priv_destroy(). v6: * Squash some of the last patch to patch #5 and patch #9. Patch #3: * Add paragraph in .rst file. Patch #4: * Reserve '1' more place on SKB for NUL terminator in the error message string. * Add more prints on error flow, re-write the printing function and add ethnl_module_fw_flash_ntf_put_err(). * Change the communication method so notification will be sent in unicast instead of multicast. * Add new 'struct ethnl_module_fw_flash_ntf_params' that holds the relevant info for unicast communication and use it to send notification to the specific socket. * s/nla_put_u64_64bit/nla_put_uint/ Patch #7: * In ethtool_cmis_cdb_init(), Use 'const' for the 'params' parameter. Patch #8: * Add a list field to struct ethtool_module_fw_flash for module_fw_flash_work_list that will be presented in the next patch. * Move ethtool_cmis_fw_update() cleaning to a new function that will be represented in the next patch. * Move some of the fields in struct ethtool_module_fw_flash to a separate struct, so ethtool_cmis_fw_update() will get only the relevant parameters for it. * Edit the relevant functions to get the relevant params for them. * s/CMIS_MODULE_READY_MAX_DURATION_USEC/CMIS_MODULE_READY_MAX_DURATION_MSEC Patch #9: * Add a paragraph in the commit message. * Rename labels in module_flash_fw_schedule(). * Add info to genl_sk_priv_*() and implement the relevant callbacks, in order to handle properly a scenario of closing the socket from user space before the work item was ended. * Add a list the holds all the ethtool_module_fw_flash struct that corresponds to the in progress work items. * Add a new enum for the socket types. * Use both above to identify a flashing socket, add it to the list and when closing socket affect only the flashing type. * Create a new function that will get the work item instead of ethtool_cmis_fw_update(). * Edit the relevant functions to get the relevant params for them. * The new function will call the old ethtool_cmis_fw_update(), and do the cleaning, so the existence of the list should be completely isolated in module.c. =================== Signed-off-by: David S. Miller <[email protected]>

Petr Machata says: ==================== selftest: Clean-up and stabilize mirroring tests The mirroring selftests work by sending ICMP traffic between two hosts. Along the way, this traffic is mirrored to a gretap netdevice, and counter taps are then installed strategically along the path of the mirrored traffic to verify the mirroring took place. The problem with this is that besides mirroring the primary traffic, any other service traffic is mirrored as well. At the same time, because the tests need to work in HW-offloaded scenarios, the ability of the device to do arbitrary packet inspection should not be taken for granted. Most tests therefore simply use matchall, one uses flower to match on IP address. As a result, the selftests are noisy. mirror_test() accommodated this noisiness by giving the counters an allowance of several packets. But that only works up to a point, and on busy systems won't be always enough. In this patch set, clean up and stabilize the mirroring selftests. The original intention was to port the tests over to UDP, but the logic of ICMP ends up being so entangled in the mirroring selftests that the changes feel overly invasive. Instead, ICMP is kept, but where possible, we match on ICMP message type, thus filtering out hits by other ICMP messages. Where this is not practical (where the counter tap is put on a device that carries encapsulated packets), switch the counter condition to _at least_ X observed packets. This is less robust, but barely so -- probably the only scenario that this would not catch is something like erroneous packet duplication, which would hopefully get caught by the numerous other tests in this extensive suite. - Patches #1 to #3 clean up parameters at various helpers. - Patches #4 to #6 stabilize the mirroring selftests as described above. - Mirroring tests currently allow testing SW datapath even on HW netdevices by trapping traffic to the SW datapath. This complicates the tests a bit without a good reason: to test SW datapath, just run the selftests on the veth topology. Thus in patch #7, drop support for this dual SW/HW testing. - At this point, some cleanups were either made possible by the previous patches, or were always possible. In patches #8 to #11, realize these cleanups. - In patch #12, fix mlxsw mirror_gre selftest to respect setting TESTS. ==================== Signed-off-by: David S. Miller <[email protected]>

Michael Chan says: ==================== bnxt_en: PTP updates for net-next The first 5 patches implement the PTP feature on the new BCM5760X chips. The main new hardware feature is the new TX timestamp completion which enables the driver to retrieve the TX timestamp in NAPI without deferring to the PTP worker. The last 5 patches increase the number of TX PTP packets in-flight from 1 to 4 on the older BCM5750X chips. On these older chips, we need to call firmware in the PTP worker to retrieve the timestamp. We use an arry to keep track of the in-flight TX PTP packets. v2: Patch #2: Fix the unwind of txr->is_ts_pkt when bnxt_start_xmit() aborts. Patch #4: Set the SKBTX_IN_PROGRESS flag for timestamp packets. ==================== Signed-off-by: David S. Miller <[email protected]>

…play During inode logging (and log replay too), we are holding a transaction handle and we often need to call btrfs_iget(), which will read an inode from its subvolume btree if it's not loaded in memory and that results in allocating an inode with GFP_KERNEL semantics at the btrfs_alloc_inode() callback - and this may recurse into the filesystem in case we are under memory pressure and attempt to commit the current transaction, resulting in a deadlock since the logging (or log replay) task is holding a transaction handle open. Syzbot reported this with the following stack traces: WARNING: possible circular locking dependency detected 6.10.0-rc2-syzkaller-00361-g061d1af7b030 #0 Not tainted ------------------------------------------------------ syz-executor.1/9919 is trying to acquire lock: ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: might_alloc include/linux/sched/mm.h:334 [inline] ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: slab_pre_alloc_hook mm/slub.c:3891 [inline] ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: slab_alloc_node mm/slub.c:3981 [inline] ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020 but task is already holding lock: ffff88804b569358 (&ei->log_mutex){+.+.}-{3:3}, at: btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&ei->log_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x175/0x9c0 kernel/locking/mutex.c:752 btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481 btrfs_log_inode_parent+0x8cb/0x2a90 fs/btrfs/tree-log.c:7079 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180 btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959 vfs_fsync_range+0x141/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2794 [inline] btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705 new_sync_write fs/read_write.c:497 [inline] vfs_write+0x6b6/0x1140 fs/read_write.c:590 ksys_write+0x12f/0x260 fs/read_write.c:643 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e -> #2 (btrfs_trans_num_extwriters){++++}-{0:0}: join_transaction+0x164/0xf40 fs/btrfs/transaction.c:315 start_transaction+0x427/0x1a70 fs/btrfs/transaction.c:700 btrfs_commit_super+0xa1/0x110 fs/btrfs/disk-io.c:4170 close_ctree+0xcb0/0xf90 fs/btrfs/disk-io.c:4324 generic_shutdown_super+0x159/0x3d0 fs/super.c:642 kill_anon_super+0x3a/0x60 fs/super.c:1226 btrfs_kill_super+0x3b/0x50 fs/btrfs/super.c:2096 deactivate_locked_super+0xbe/0x1a0 fs/super.c:473 deactivate_super+0xde/0x100 fs/super.c:506 cleanup_mnt+0x222/0x450 fs/namespace.c:1267 task_work_run+0x14e/0x250 kernel/task_work.c:180 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x278/0x2a0 kernel/entry/common.c:218 __do_fast_syscall_32+0x80/0x120 arch/x86/entry/common.c:389 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e -> #1 (btrfs_trans_num_writers){++++}-{0:0}: __lock_release kernel/locking/lockdep.c:5468 [inline] lock_release+0x33e/0x6c0 kernel/locking/lockdep.c:5774 percpu_up_read include/linux/percpu-rwsem.h:99 [inline] __sb_end_write include/linux/fs.h:1650 [inline] sb_end_intwrite include/linux/fs.h:1767 [inline] __btrfs_end_transaction+0x5ca/0x920 fs/btrfs/transaction.c:1071 btrfs_commit_inode_delayed_inode+0x228/0x330 fs/btrfs/delayed-inode.c:1301 btrfs_evict_inode+0x960/0xe80 fs/btrfs/inode.c:5291 evict+0x2ed/0x6c0 fs/inode.c:667 iput_final fs/inode.c:1741 [inline] iput.part.0+0x5a8/0x7f0 fs/inode.c:1767 iput+0x5c/0x80 fs/inode.c:1757 dentry_unlink_inode+0x295/0x480 fs/dcache.c:400 __dentry_kill+0x1d0/0x600 fs/dcache.c:603 dput.part.0+0x4b1/0x9b0 fs/dcache.c:845 dput+0x1f/0x30 fs/dcache.c:835 ovl_stack_put+0x60/0x90 fs/overlayfs/util.c:132 ovl_destroy_inode+0xc6/0x190 fs/overlayfs/super.c:182 destroy_inode+0xc4/0x1b0 fs/inode.c:311 iput_final fs/inode.c:1741 [inline] iput.part.0+0x5a8/0x7f0 fs/inode.c:1767 iput+0x5c/0x80 fs/inode.c:1757 dentry_unlink_inode+0x295/0x480 fs/dcache.c:400 __dentry_kill+0x1d0/0x600 fs/dcache.c:603 shrink_kill fs/dcache.c:1048 [inline] shrink_dentry_list+0x140/0x5d0 fs/dcache.c:1075 prune_dcache_sb+0xeb/0x150 fs/dcache.c:1156 super_cache_scan+0x32a/0x550 fs/super.c:221 do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435 shrink_slab_memcg mm/shrinker.c:548 [inline] shrink_slab+0xa87/0x1310 mm/shrinker.c:626 shrink_one+0x493/0x7c0 mm/vmscan.c:4790 shrink_many mm/vmscan.c:4851 [inline] lru_gen_shrink_node+0x89f/0x1750 mm/vmscan.c:4951 shrink_node mm/vmscan.c:5910 [inline] kswapd_shrink_node mm/vmscan.c:6720 [inline] balance_pgdat+0x1105/0x1970 mm/vmscan.c:6911 kswapd+0x5ea/0xbf0 mm/vmscan.c:7180 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 -> #0 (fs_reclaim){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain kernel/locking/lockdep.c:3869 [inline] __lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719 __fs_reclaim_acquire mm/page_alloc.c:3801 [inline] fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3815 might_alloc include/linux/sched/mm.h:334 [inline] slab_pre_alloc_hook mm/slub.c:3891 [inline] slab_alloc_node mm/slub.c:3981 [inline] kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020 btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411 alloc_inode+0x5d/0x230 fs/inode.c:261 iget5_locked fs/inode.c:1235 [inline] iget5_locked+0x1c9/0x2c0 fs/inode.c:1228 btrfs_iget_locked fs/btrfs/inode.c:5590 [inline] btrfs_iget_path fs/btrfs/inode.c:5607 [inline] btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636 add_conflicting_inode fs/btrfs/tree-log.c:5657 [inline] copy_inode_items_to_log+0x1039/0x1e30 fs/btrfs/tree-log.c:5928 btrfs_log_inode+0xa48/0x4660 fs/btrfs/tree-log.c:6592 log_new_delayed_dentries fs/btrfs/tree-log.c:6363 [inline] btrfs_log_inode+0x27dd/0x4660 fs/btrfs/tree-log.c:6718 btrfs_log_all_parents fs/btrfs/tree-log.c:6833 [inline] btrfs_log_inode_parent+0x22ba/0x2a90 fs/btrfs/tree-log.c:7141 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180 btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959 vfs_fsync_range+0x141/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2794 [inline] btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705 do_iter_readv_writev+0x504/0x780 fs/read_write.c:741 vfs_writev+0x36f/0xde0 fs/read_write.c:971 do_pwritev+0x1b2/0x260 fs/read_write.c:1072 __do_compat_sys_pwritev2 fs/read_write.c:1218 [inline] __se_compat_sys_pwritev2 fs/read_write.c:1210 [inline] __ia32_compat_sys_pwritev2+0x121/0x1b0 fs/read_write.c:1210 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e other info that might help us debug this: Chain exists of: fs_reclaim --> btrfs_trans_num_extwriters --> &ei->log_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->log_mutex); lock(btrfs_trans_num_extwriters); lock(&ei->log_mutex); lock(fs_reclaim); *** DEADLOCK *** 7 locks held by syz-executor.1/9919: #0: ffff88802be20420 (sb_writers#23){.+.+}-{0:0}, at: do_pwritev+0x1b2/0x260 fs/read_write.c:1072 #1: ffff888065c0f8f0 (&sb->s_type->i_mutex_key#33){++++}-{3:3}, at: inode_lock include/linux/fs.h:791 [inline] #1: ffff888065c0f8f0 (&sb->s_type->i_mutex_key#33){++++}-{3:3}, at: btrfs_inode_lock+0xc8/0x110 fs/btrfs/inode.c:385 #2: ffff888065c0f778 (&ei->i_mmap_lock){++++}-{3:3}, at: btrfs_inode_lock+0xee/0x110 fs/btrfs/inode.c:388 #3: ffff88802be20610 (sb_internal#4){.+.+}-{0:0}, at: btrfs_sync_file+0x95b/0xe10 fs/btrfs/file.c:1952 #4: ffff8880546323f0 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x430/0xf40 fs/btrfs/transaction.c:290 #5: ffff888054632418 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x430/0xf40 fs/btrfs/transaction.c:290 #6: ffff88804b569358 (&ei->log_mutex){+.+.}-{3:3}, at: btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481 stack backtrace: CPU: 2 PID: 9919 Comm: syz-executor.1 Not tainted 6.10.0-rc2-syzkaller-00361-g061d1af7b030 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 check_noncircular+0x31a/0x400 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain kernel/locking/lockdep.c:3869 [inline] __lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719 __fs_reclaim_acquire mm/page_alloc.c:3801 [inline] fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3815 might_alloc include/linux/sched/mm.h:334 [inline] slab_pre_alloc_hook mm/slub.c:3891 [inline] slab_alloc_node mm/slub.c:3981 [inline] kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020 btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411 alloc_inode+0x5d/0x230 fs/inode.c:261 iget5_locked fs/inode.c:1235 [inline] iget5_locked+0x1c9/0x2c0 fs/inode.c:1228 btrfs_iget_locked fs/btrfs/inode.c:5590 [inline] btrfs_iget_path fs/btrfs/inode.c:5607 [inline] btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636 add_conflicting_inode fs/btrfs/tree-log.c:5657 [inline] copy_inode_items_to_log+0x1039/0x1e30 fs/btrfs/tree-log.c:5928 btrfs_log_inode+0xa48/0x4660 fs/btrfs/tree-log.c:6592 log_new_delayed_dentries fs/btrfs/tree-log.c:6363 [inline] btrfs_log_inode+0x27dd/0x4660 fs/btrfs/tree-log.c:6718 btrfs_log_all_parents fs/btrfs/tree-log.c:6833 [inline] btrfs_log_inode_parent+0x22ba/0x2a90 fs/btrfs/tree-log.c:7141 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180 btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959 vfs_fsync_range+0x141/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2794 [inline] btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705 do_iter_readv_writev+0x504/0x780 fs/read_write.c:741 vfs_writev+0x36f/0xde0 fs/read_write.c:971 do_pwritev+0x1b2/0x260 fs/read_write.c:1072 __do_compat_sys_pwritev2 fs/read_write.c:1218 [inline] __se_compat_sys_pwritev2 fs/read_write.c:1210 [inline] __ia32_compat_sys_pwritev2+0x121/0x1b0 fs/read_write.c:1210 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e RIP: 0023:0xf7334579 Code: b8 01 10 06 03 (...) RSP: 002b:00000000f5f265ac EFLAGS: 00000292 ORIG_RAX: 000000000000017b RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000200002c0 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000292 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Fix this by ensuring we are under a NOFS scope whenever we call btrfs_iget() during inode logging and log replay. Reported-by: [email protected] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Fixes: 712e36c ("btrfs: use GFP_KERNEL in btrfs_alloc_inode") Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Josef Bacik <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

Since f663a03 ("bpf, x64: Remove tail call detection"), tail_call_reachable won't be detected in x86 JIT. And, tail_call_reachable is provided by verifier. Therefore, in test_bpf, the tail_call_reachable must be provided in test cases before running. Fix and test: [ 174.828662] test_bpf: #0 Tail call leaf jited:1 170 PASS [ 174.829574] test_bpf: #1 Tail call 2 jited:1 244 PASS [ 174.830363] test_bpf: #2 Tail call 3 jited:1 296 PASS [ 174.830924] test_bpf: #3 Tail call 4 jited:1 719 PASS [ 174.831863] test_bpf: #4 Tail call load/store leaf jited:1 197 PASS [ 174.832240] test_bpf: #5 Tail call load/store jited:1 326 PASS [ 174.832240] test_bpf: #6 Tail call error path, max count reached jited:1 2214 PASS [ 174.835713] test_bpf: #7 Tail call count preserved across function calls jited:1 609751 PASS [ 175.446098] test_bpf: #8 Tail call error path, NULL target jited:1 472 PASS [ 175.447597] test_bpf: #9 Tail call error path, index out of range jited:1 206 PASS [ 175.448833] test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed] Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-lkp/[email protected] Fixes: f663a03 ("bpf, x64: Remove tail call detection") Signed-off-by: Leon Hwang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>

Bos can be put with multiple unrelated dma-resv locks held. But imported bos attempt to grab the bo dma-resv during dma-buf detach that typically happens during cleanup. That leads to lockde splats similar to the below and a potential ABBA deadlock. Fix this by always taking the delayed workqueue cleanup path for imported bos. Requesting stable fixes from when the Xe driver was introduced, since its usage of drm_exec and wide vm dma_resvs appear to be the first reliable trigger of this. [22982.116427] ============================================ [22982.116428] WARNING: possible recursive locking detected [22982.116429] 6.10.0-rc2+ #10 Tainted: G U W [22982.116430] -------------------------------------------- [22982.116430] glxgears:sh0/5785 is trying to acquire lock: [22982.116431] ffff8c2bafa539a8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_detach+0x3b/0xf0 [22982.116438] but task is already holding lock: [22982.116438] ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec] [22982.116442] other info that might help us debug this: [22982.116442] Possible unsafe locking scenario: [22982.116443] CPU0 [22982.116444] ---- [22982.116444] lock(reservation_ww_class_mutex); [22982.116445] lock(reservation_ww_class_mutex); [22982.116447] *** DEADLOCK *** [22982.116447] May be due to missing lock nesting notation [22982.116448] 5 locks held by glxgears:sh0/5785: [22982.116449] #0: ffff8c2d9aba58c8 (&xef->vm.lock){+.+.}-{3:3}, at: xe_file_close+0xde/0x1c0 [xe] [22982.116507] #1: ffff8c2e28cc8480 (&vm->lock){++++}-{3:3}, at: xe_vm_close_and_put+0x161/0x9b0 [xe] [22982.116578] #2: ffff8c2e31982970 (&val->lock){.+.+}-{3:3}, at: xe_validation_ctx_init+0x6d/0x70 [xe] [22982.116647] #3: ffffacdc469478a8 (reservation_ww_class_acquire){+.+.}-{0:0}, at: xe_vma_destroy_unlocked+0x7f/0xe0 [xe] [22982.116716] #4: ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec] [22982.116719] stack backtrace: [22982.116720] CPU: 8 PID: 5785 Comm: glxgears:sh0 Tainted: G U W 6.10.0-rc2+ #10 [22982.116721] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023 [22982.116723] Call Trace: [22982.116724] <TASK> [22982.116725] dump_stack_lvl+0x77/0xb0 [22982.116727] __lock_acquire+0x1232/0x2160 [22982.116730] lock_acquire+0xcb/0x2d0 [22982.116732] ? dma_buf_detach+0x3b/0xf0 [22982.116734] ? __lock_acquire+0x417/0x2160 [22982.116736] __ww_mutex_lock.constprop.0+0xd0/0x13b0 [22982.116738] ? dma_buf_detach+0x3b/0xf0 [22982.116741] ? dma_buf_detach+0x3b/0xf0 [22982.116743] ? ww_mutex_lock+0x2b/0x90 [22982.116745] ww_mutex_lock+0x2b/0x90 [22982.116747] dma_buf_detach+0x3b/0xf0 [22982.116749] drm_prime_gem_destroy+0x2f/0x40 [drm] [22982.116775] xe_ttm_bo_destroy+0x32/0x220 [xe] [22982.116818] ? __mutex_unlock_slowpath+0x3a/0x290 [22982.116821] drm_exec_unlock_all+0xa1/0xd0 [drm_exec] [22982.116823] drm_exec_fini+0x12/0xb0 [drm_exec] [22982.116824] xe_validation_ctx_fini+0x15/0x40 [xe] [22982.116892] xe_vma_destroy_unlocked+0xb1/0xe0 [xe] [22982.116959] xe_vm_close_and_put+0x41a/0x9b0 [xe] [22982.117025] ? xa_find+0xe3/0x1e0 [22982.117028] xe_file_close+0x10a/0x1c0 [xe] [22982.117074] drm_file_free+0x22a/0x280 [drm] [22982.117099] drm_release_noglobal+0x22/0x70 [drm] [22982.117119] __fput+0xf1/0x2d0 [22982.117122] task_work_run+0x59/0x90 [22982.117125] do_exit+0x330/0xb40 [22982.117127] do_group_exit+0x36/0xa0 [22982.117129] get_signal+0xbd2/0xbe0 [22982.117131] arch_do_signal_or_restart+0x3e/0x240 [22982.117134] syscall_exit_to_user_mode+0x1e7/0x290 [22982.117137] do_syscall_64+0xa1/0x180 [22982.117139] ? lock_acquire+0xcb/0x2d0 [22982.117140] ? __set_task_comm+0x28/0x1e0 [22982.117141] ? find_held_lock+0x2b/0x80 [22982.117144] ? __set_task_comm+0xe1/0x1e0 [22982.117145] ? lock_release+0xca/0x290 [22982.117147] ? __do_sys_prctl+0x245/0xab0 [22982.117149] ? lockdep_hardirqs_on_prepare+0xde/0x190 [22982.117150] ? syscall_exit_to_user_mode+0xb0/0x290 [22982.117152] ? do_syscall_64+0xa1/0x180 [22982.117154] ? __lock_acquire+0x417/0x2160 [22982.117155] ? reacquire_held_locks+0xd1/0x1f0 [22982.117156] ? do_user_addr_fault+0x30c/0x790 [22982.117158] ? lock_acquire+0xcb/0x2d0 [22982.117160] ? find_held_lock+0x2b/0x80 [22982.117162] ? do_user_addr_fault+0x357/0x790 [22982.117163] ? lock_release+0xca/0x290 [22982.117164] ? do_user_addr_fault+0x361/0x790 [22982.117166] ? trace_hardirqs_off+0x4b/0xc0 [22982.117168] ? clear_bhb_loop+0x45/0xa0 [22982.117170] ? clear_bhb_loop+0x45/0xa0 [22982.117172] ? clear_bhb_loop+0x45/0xa0 [22982.117174] entry_SYSCALL_64_after_hwframe+0x76/0x7e [22982.117176] RIP: 0033:0x7f943d267169 [22982.117192] Code: Unable to access opcode bytes at 0x7f943d26713f. [22982.117193] RSP: 002b:00007f9430bffc80 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca [22982.117195] RAX: fffffffffffffe00 RBX: 0000000000000000 RCX: 00007f943d267169 [22982.117196] RDX: 0000000000000000 RSI: 0000000000000189 RDI: 00005622f89579d0 [22982.117197] RBP: 00007f9430bffcb0 R08: 0000000000000000 R09: 00000000ffffffff [22982.117198] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [22982.117199] R13: 0000000000000000 R14: 0000000000000000 R15: 00005622f89579d0 [22982.117202] </TASK> Fixes: dd08ebf ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Christian König <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: [email protected] Cc: <[email protected]> # v6.8+ Signed-off-by: Thomas Hellström <[email protected]> Reviewed-by: Matthew Brost <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Reviewed-by: Christian König <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

If the driver uses a page pool, it creates a page pool with page_pool_create(). The reference count of page pool is 1 as default. A page pool will be destroyed only when a reference count reaches 0. page_pool_destroy() is used to destroy page pool, it decreases a reference count. When a page pool is destroyed, ->disconnect() is called, which is mem_allocator_disconnect(). This function internally acquires mutex_lock(). If the driver uses XDP, it registers a memory model with xdp_rxq_info_reg_mem_model(). The xdp_rxq_info_reg_mem_model() internally increases a page pool reference count if a memory model is a page pool. Now the reference count is 2. To destroy a page pool, the driver should call both page_pool_destroy() and xdp_unreg_mem_model(). The xdp_unreg_mem_model() internally calls page_pool_destroy(). Only page_pool_destroy() decreases a reference count. If a driver calls page_pool_destroy() then xdp_unreg_mem_model(), we will face an invalid wait context warning. Because xdp_unreg_mem_model() calls page_pool_destroy() with rcu_read_lock(). The page_pool_destroy() internally acquires mutex_lock(). Splat looks like: ============================= [ BUG: Invalid wait context ] 6.10.0-rc6+ #4 Tainted: G W ----------------------------- ethtool/1806 is trying to lock: ffffffff90387b90 (mem_id_lock){+.+.}-{4:4}, at: mem_allocator_disconnect+0x73/0x150 other info that might help us debug this: context-{5:5} 3 locks held by ethtool/1806: stack backtrace: CPU: 0 PID: 1806 Comm: ethtool Tainted: G W 6.10.0-rc6+ #4 f916f41f172891c800f2fed Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 Call Trace: <TASK> dump_stack_lvl+0x7e/0xc0 __lock_acquire+0x1681/0x4de0 ? _printk+0x64/0xe0 ? __pfx_mark_lock.part.0+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 lock_acquire+0x1b3/0x580 ? mem_allocator_disconnect+0x73/0x150 ? __wake_up_klogd.part.0+0x16/0xc0 ? __pfx_lock_acquire+0x10/0x10 ? dump_stack_lvl+0x91/0xc0 __mutex_lock+0x15c/0x1690 ? mem_allocator_disconnect+0x73/0x150 ? __pfx_prb_read_valid+0x10/0x10 ? mem_allocator_disconnect+0x73/0x150 ? __pfx_llist_add_batch+0x10/0x10 ? console_unlock+0x193/0x1b0 ? lockdep_hardirqs_on+0xbe/0x140 ? __pfx___mutex_lock+0x10/0x10 ? tick_nohz_tick_stopped+0x16/0x90 ? __irq_work_queue_local+0x1e5/0x330 ? irq_work_queue+0x39/0x50 ? __wake_up_klogd.part.0+0x79/0xc0 ? mem_allocator_disconnect+0x73/0x150 mem_allocator_disconnect+0x73/0x150 ? __pfx_mem_allocator_disconnect+0x10/0x10 ? mark_held_locks+0xa5/0xf0 ? rcu_is_watching+0x11/0xb0 page_pool_release+0x36e/0x6d0 page_pool_destroy+0xd7/0x440 xdp_unreg_mem_model+0x1a7/0x2a0 ? __pfx_xdp_unreg_mem_model+0x10/0x10 ? kfree+0x125/0x370 ? bnxt_free_ring.isra.0+0x2eb/0x500 ? bnxt_free_mem+0x5ac/0x2500 xdp_rxq_info_unreg+0x4a/0xd0 bnxt_free_mem+0x1356/0x2500 bnxt_close_nic+0xf0/0x3b0 ? __pfx_bnxt_close_nic+0x10/0x10 ? ethnl_parse_bit+0x2c6/0x6d0 ? __pfx___nla_validate_parse+0x10/0x10 ? __pfx_ethnl_parse_bit+0x10/0x10 bnxt_set_features+0x2a8/0x3e0 __netdev_update_features+0x4dc/0x1370 ? ethnl_parse_bitset+0x4ff/0x750 ? __pfx_ethnl_parse_bitset+0x10/0x10 ? __pfx___netdev_update_features+0x10/0x10 ? mark_held_locks+0xa5/0xf0 ? _raw_spin_unlock_irqrestore+0x42/0x70 ? __pm_runtime_resume+0x7d/0x110 ethnl_set_features+0x32d/0xa20 To fix this problem, it uses rhashtable_lookup_fast() instead of rhashtable_lookup() with rcu_read_lock(). Using xa without rcu_read_lock() here is safe. xa is freed by __xdp_mem_allocator_rcu_free() and this is called by call_rcu() of mem_xa_remove(). The mem_xa_remove() is called by page_pool_destroy() if a reference count reaches 0. The xa is already protected by the reference count mechanism well in the control plane. So removing rcu_read_lock() for page_pool_destroy() is safe. Fixes: c3f812c ("page_pool: do not release pool until inflight == 0.") Signed-off-by: Taehee Yoo <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

When using cachefiles, lockdep may emit something similar to the circular locking dependency notice below. The problem appears to stem from the following: (1) Cachefiles manipulates xattrs on the files in its cache when called from ->writepages(). (2) The setxattr() and removexattr() system call handlers get the name (and value) from userspace after taking the sb_writers lock, putting accesses of the vma->vm_lock and mm->mmap_lock inside of that. (3) The afs filesystem uses a per-inode lock to prevent multiple revalidation RPCs and in writeback vs truncate to prevent parallel operations from deadlocking against the server on one side and local page locks on the other. Fix this by moving the getting of the name and value in {get,remove}xattr() outside of the sb_writers lock. This also has the minor benefits that we don't need to reget these in the event of a retry and we never try to take the sb_writers lock in the event we can't pull the name and value into the kernel. Alternative approaches that might fix this include moving the dispatch of a write to the cache off to a workqueue or trying to do without the validation lock in afs. Note that this might also affect other filesystems that use netfslib and/or cachefiles. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-build2+ torvalds#956 Not tainted ------------------------------------------------------ fsstress/6050 is trying to acquire lock: ffff888138fd82f0 (mapping.invalidate_lock#3){++++}-{3:3}, at: filemap_fault+0x26e/0x8b0 but task is already holding lock: ffff888113f26d18 (&vma->vm_lock->lock){++++}-{3:3}, at: lock_vma_under_rcu+0x165/0x250 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&vma->vm_lock->lock){++++}-{3:3}: __lock_acquire+0xaf0/0xd80 lock_acquire.part.0+0x103/0x280 down_write+0x3b/0x50 vma_start_write+0x6b/0xa0 vma_link+0xcc/0x140 insert_vm_struct+0xb7/0xf0 alloc_bprm+0x2c1/0x390 kernel_execve+0x65/0x1a0 call_usermodehelper_exec_async+0x14d/0x190 ret_from_fork+0x24/0x40 ret_from_fork_asm+0x1a/0x30 -> #3 (&mm->mmap_lock){++++}-{3:3}: __lock_acquire+0xaf0/0xd80 lock_acquire.part.0+0x103/0x280 __might_fault+0x7c/0xb0 strncpy_from_user+0x25/0x160 removexattr+0x7f/0x100 __do_sys_fremovexattr+0x7e/0xb0 do_syscall_64+0x9f/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (sb_writers#14){.+.+}-{0:0}: __lock_acquire+0xaf0/0xd80 lock_acquire.part.0+0x103/0x280 percpu_down_read+0x3c/0x90 vfs_iocb_iter_write+0xe9/0x1d0 __cachefiles_write+0x367/0x430 cachefiles_issue_write+0x299/0x2f0 netfs_advance_write+0x117/0x140 netfs_write_folio.isra.0+0x5ca/0x6e0 netfs_writepages+0x230/0x2f0 afs_writepages+0x4d/0x70 do_writepages+0x1e8/0x3e0 filemap_fdatawrite_wbc+0x84/0xa0 __filemap_fdatawrite_range+0xa8/0xf0 file_write_and_wait_range+0x59/0x90 afs_release+0x10f/0x270 __fput+0x25f/0x3d0 __do_sys_close+0x43/0x70 do_syscall_64+0x9f/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&vnode->validate_lock){++++}-{3:3}: __lock_acquire+0xaf0/0xd80 lock_acquire.part.0+0x103/0x280 down_read+0x95/0x200 afs_writepages+0x37/0x70 do_writepages+0x1e8/0x3e0 filemap_fdatawrite_wbc+0x84/0xa0 filemap_invalidate_inode+0x167/0x1e0 netfs_unbuffered_write_iter+0x1bd/0x2d0 vfs_write+0x22e/0x320 ksys_write+0xbc/0x130 do_syscall_64+0x9f/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (mapping.invalidate_lock#3){++++}-{3:3}: check_noncircular+0x119/0x160 check_prev_add+0x195/0x430 __lock_acquire+0xaf0/0xd80 lock_acquire.part.0+0x103/0x280 down_read+0x95/0x200 filemap_fault+0x26e/0x8b0 __do_fault+0x57/0xd0 do_pte_missing+0x23b/0x320 __handle_mm_fault+0x2d4/0x320 handle_mm_fault+0x14f/0x260 do_user_addr_fault+0x2a2/0x500 exc_page_fault+0x71/0x90 asm_exc_page_fault+0x22/0x30 other info that might help us debug this: Chain exists of: mapping.invalidate_lock#3 --> &mm->mmap_lock --> &vma->vm_lock->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- rlock(&vma->vm_lock->lock); lock(&mm->mmap_lock); lock(&vma->vm_lock->lock); rlock(mapping.invalidate_lock#3); *** DEADLOCK *** 1 lock held by fsstress/6050: #0: ffff888113f26d18 (&vma->vm_lock->lock){++++}-{3:3}, at: lock_vma_under_rcu+0x165/0x250 stack backtrace: CPU: 0 PID: 6050 Comm: fsstress Not tainted 6.10.0-build2+ torvalds#956 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Call Trace: <TASK> dump_stack_lvl+0x57/0x80 check_noncircular+0x119/0x160 ? queued_spin_lock_slowpath+0x4be/0x510 ? __pfx_check_noncircular+0x10/0x10 ? __pfx_queued_spin_lock_slowpath+0x10/0x10 ? mark_lock+0x47/0x160 ? init_chain_block+0x9c/0xc0 ? add_chain_block+0x84/0xf0 check_prev_add+0x195/0x430 __lock_acquire+0xaf0/0xd80 ? __pfx___lock_acquire+0x10/0x10 ? __lock_release.isra.0+0x13b/0x230 lock_acquire.part.0+0x103/0x280 ? filemap_fault+0x26e/0x8b0 ? __pfx_lock_acquire.part.0+0x10/0x10 ? rcu_is_watching+0x34/0x60 ? lock_acquire+0xd7/0x120 down_read+0x95/0x200 ? filemap_fault+0x26e/0x8b0 ? __pfx_down_read+0x10/0x10 ? __filemap_get_folio+0x25/0x1a0 filemap_fault+0x26e/0x8b0 ? __pfx_filemap_fault+0x10/0x10 ? find_held_lock+0x7c/0x90 ? __pfx___lock_release.isra.0+0x10/0x10 ? __pte_offset_map+0x99/0x110 __do_fault+0x57/0xd0 do_pte_missing+0x23b/0x320 __handle_mm_fault+0x2d4/0x320 ? __pfx___handle_mm_fault+0x10/0x10 handle_mm_fault+0x14f/0x260 do_user_addr_fault+0x2a2/0x500 exc_page_fault+0x71/0x90 asm_exc_page_fault+0x22/0x30 Signed-off-by: David Howells <[email protected]> Link: https://lore.kernel.org/r/[email protected] cc: Alexander Viro <[email protected]> cc: Christian Brauner <[email protected]> cc: Jan Kara <[email protected]> cc: Jeff Layton <[email protected]> cc: Gao Xiang <[email protected]> cc: Matthew Wilcox <[email protected]> cc: [email protected] cc: [email protected] cc: [email protected] [brauner: fix minor issues] Signed-off-by: Christian Brauner <[email protected]>

When l2tp tunnels use a socket provided by userspace, we can hit lockdep splats like the below when data is transmitted through another (unrelated) userspace socket which then gets routed over l2tp. This issue was previously discussed here: https://lore.kernel.org/netdev/[email protected]/ The solution is to have lockdep treat socket locks of l2tp tunnel sockets separately than those of standard INET sockets. To do so, use a different lockdep subclass where lock nesting is possible. ============================================ WARNING: possible recursive locking detected 6.10.0+ torvalds#34 Not tainted -------------------------------------------- iperf3/771 is trying to acquire lock: ffff8881027601d8 (slock-AF_INET/1){+.-.}-{2:2}, at: l2tp_xmit_skb+0x243/0x9d0 but task is already holding lock: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_INET/1); lock(slock-AF_INET/1); *** DEADLOCK *** May be due to missing lock nesting notation 10 locks held by iperf3/771: #0: ffff888102650258 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x1a/0x40 #1: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #2: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #3: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x28b/0x9f0 #4: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0xf9/0x260 #5: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 #6: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #7: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #8: ffffffff822ac1e0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0xcc/0x1450 #9: ffff888101f33258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock#2){+...}-{2:2}, at: __dev_queue_xmit+0x513/0x1450 stack backtrace: CPU: 2 UID: 0 PID: 771 Comm: iperf3 Not tainted 6.10.0+ torvalds#34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x69/0xa0 dump_stack+0xc/0x20 __lock_acquire+0x135d/0x2600 ? srso_alias_return_thunk+0x5/0xfbef5 lock_acquire+0xc4/0x2a0 ? l2tp_xmit_skb+0x243/0x9d0 ? __skb_checksum+0xa3/0x540 _raw_spin_lock_nested+0x35/0x50 ? l2tp_xmit_skb+0x243/0x9d0 l2tp_xmit_skb+0x243/0x9d0 l2tp_eth_dev_xmit+0x3c/0xc0 dev_hard_start_xmit+0x11e/0x420 sch_direct_xmit+0xc3/0x640 __dev_queue_xmit+0x61c/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 __tcp_send_ack+0x1b8/0x340 tcp_send_ack+0x23/0x30 __tcp_ack_snd_check+0xa8/0x530 ? srso_alias_return_thunk+0x5/0xfbef5 tcp_rcv_established+0x412/0xd70 tcp_v4_do_rcv+0x299/0x420 tcp_v4_rcv+0x1991/0x1e10 ip_protocol_deliver_rcu+0x50/0x220 ip_local_deliver_finish+0x158/0x260 ip_local_deliver+0xc8/0xe0 ip_rcv+0xe5/0x1d0 ? __pfx_ip_rcv+0x10/0x10 __netif_receive_skb_one_core+0xce/0xe0 ? process_backlog+0x28b/0x9f0 __netif_receive_skb+0x34/0xd0 ? process_backlog+0x28b/0x9f0 process_backlog+0x2cb/0x9f0 __napi_poll.constprop.0+0x61/0x280 net_rx_action+0x332/0x670 ? srso_alias_return_thunk+0x5/0xfbef5 ? find_held_lock+0x2b/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 handle_softirqs+0xda/0x480 ? __dev_queue_xmit+0xa2c/0x1450 do_softirq+0xa1/0xd0 </IRQ> <TASK> __local_bh_enable_ip+0xc8/0xe0 ? __dev_queue_xmit+0xa2c/0x1450 __dev_queue_xmit+0xa48/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 tcp_write_xmit+0x766/0x2fb0 ? __entry_text_end+0x102ba9/0x102bad ? srso_alias_return_thunk+0x5/0xfbef5 ? __might_fault+0x74/0xc0 ? srso_alias_return_thunk+0x5/0xfbef5 __tcp_push_pending_frames+0x56/0x190 tcp_push+0x117/0x310 tcp_sendmsg_locked+0x14c1/0x1740 tcp_sendmsg+0x28/0x40 inet_sendmsg+0x5d/0x90 sock_write_iter+0x242/0x2b0 vfs_write+0x68d/0x800 ? __pfx_sock_write_iter+0x10/0x10 ksys_write+0xc8/0xf0 __x64_sys_write+0x3d/0x50 x64_sys_call+0xfaf/0x1f50 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f4d143af992 Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> e9 01 cc ff ff 41 54 b8 02 00 00 0 RSP: 002b:00007ffd65032058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f4d143af992 RDX: 0000000000000025 RSI: 00007f4d143f3bcc RDI: 0000000000000005 RBP: 00007f4d143f2b28 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4d143f3bcc R13: 0000000000000005 R14: 0000000000000000 R15: 00007ffd650323f0 </TASK> Fixes: 0b2c597 ("l2tp: close all race conditions in l2tp_tunnel_register()") Suggested-by: Eric Dumazet <[email protected]> Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=6acef9e0a4d1f46c83d4 CC: [email protected] CC: [email protected] Signed-off-by: James Chapman <[email protected]> Signed-off-by: Tom Parkin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Tariq Toukan says: ==================== mlx5 misc patches 2024-08-08 This patchset contains multiple enhancements from the team to the mlx5 core and Eth drivers. Patch #1 by Chris bumps a defined value to permit more devices doing TC offloads. Patch #2 by Jianbo adds an IPsec fast-path optimization to replace the slow async handling. Patches #3 and #4 by Jianbo add TC offload support for complicated rules to overcome firmware limitation. Patch #5 by Gal unifies the access macro to advertised/supported link modes. Patches #6 to #9 by Gal adds extack messages in ethtool ops to replace prints to the kernel log. Patch #10 by Cosmin switches to using 'update' verb instead of 'replace' to better reflect the operation. Patch #11 by Cosmin exposes an update connection tracking operation to replace the assumed delete+add implementaiton. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Lockdep reported a warning in Linux version 6.6: [ 414.344659] ================================ [ 414.345155] WARNING: inconsistent lock state [ 414.345658] 6.6.0-07439-gba2303cacfda #6 Not tainted [ 414.346221] -------------------------------- [ 414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes: [ 414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.351204] {IN-SOFTIRQ-W} state was registered at: [ 414.351751] lock_acquire+0x18d/0x460 [ 414.352218] _raw_spin_lock_irqsave+0x39/0x60 [ 414.352769] __wake_up_common_lock+0x22/0x60 [ 414.353289] sbitmap_queue_wake_up+0x375/0x4f0 [ 414.353829] sbitmap_queue_clear+0xdd/0x270 [ 414.354338] blk_mq_put_tag+0xdf/0x170 [ 414.354807] __blk_mq_free_request+0x381/0x4d0 [ 414.355335] blk_mq_free_request+0x28b/0x3e0 [ 414.355847] __blk_mq_end_request+0x242/0xc30 [ 414.356367] scsi_end_request+0x2c1/0x830 [ 414.345155] WARNING: inconsistent lock state [ 414.345658] 6.6.0-07439-gba2303cacfda #6 Not tainted [ 414.346221] -------------------------------- [ 414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes: [ 414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.351204] {IN-SOFTIRQ-W} state was registered at: [ 414.351751] lock_acquire+0x18d/0x460 [ 414.352218] _raw_spin_lock_irqsave+0x39/0x60 [ 414.352769] __wake_up_common_lock+0x22/0x60 [ 414.353289] sbitmap_queue_wake_up+0x375/0x4f0 [ 414.353829] sbitmap_queue_clear+0xdd/0x270 [ 414.354338] blk_mq_put_tag+0xdf/0x170 [ 414.354807] __blk_mq_free_request+0x381/0x4d0 [ 414.355335] blk_mq_free_request+0x28b/0x3e0 [ 414.355847] __blk_mq_end_request+0x242/0xc30 [ 414.356367] scsi_end_request+0x2c1/0x830 [ 414.356863] scsi_io_completion+0x177/0x1610 [ 414.357379] scsi_complete+0x12f/0x260 [ 414.357856] blk_complete_reqs+0xba/0xf0 [ 414.358338] __do_softirq+0x1b0/0x7a2 [ 414.358796] irq_exit_rcu+0x14b/0x1a0 [ 414.359262] sysvec_call_function_single+0xaf/0xc0 [ 414.359828] asm_sysvec_call_function_single+0x1a/0x20 [ 414.360426] default_idle+0x1e/0x30 [ 414.360873] default_idle_call+0x9b/0x1f0 [ 414.361390] do_idle+0x2d2/0x3e0 [ 414.361819] cpu_startup_entry+0x55/0x60 [ 414.362314] start_secondary+0x235/0x2b0 [ 414.362809] secondary_startup_64_no_verify+0x18f/0x19b [ 414.363413] irq event stamp: 428794 [ 414.363825] hardirqs last enabled at (428793): [<ffffffff816bfd1c>] ktime_get+0x1dc/0x200 [ 414.364694] hardirqs last disabled at (428794): [<ffffffff85470177>] _raw_spin_lock_irq+0x47/0x50 [ 414.365629] softirqs last enabled at (428444): [<ffffffff85474780>] __do_softirq+0x540/0x7a2 [ 414.366522] softirqs last disabled at (428419): [<ffffffff813f65ab>] irq_exit_rcu+0x14b/0x1a0 [ 414.367425] other info that might help us debug this: [ 414.368194] Possible unsafe locking scenario: [ 414.368900] CPU0 [ 414.369225] ---- [ 414.369548] lock(&sbq->ws[i].wait); [ 414.370000] <Interrupt> [ 414.370342] lock(&sbq->ws[i].wait); [ 414.370802] *** DEADLOCK *** [ 414.371569] 5 locks held by kworker/u10:3/1152: [ 414.372088] #0: ffff88810130e938 ((wq_completion)writeback){+.+.}-{0:0}, at: process_scheduled_works+0x357/0x13f0 [ 414.373180] #1: ffff88810201fdb8 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x3a3/0x13f0 [ 414.374384] #2: ffffffff86ffbdc0 (rcu_read_lock){....}-{1:2}, at: blk_mq_run_hw_queue+0x637/0xa00 [ 414.375342] #3: ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.376377] #4: ffff888106205a08 (&hctx->dispatch_wait_lock){+.-.}-{2:2}, at: blk_mq_dispatch_rq_list+0x1337/0x1ee0 [ 414.378607] stack backtrace: [ 414.379177] CPU: 0 PID: 1152 Comm: kworker/u10:3 Not tainted 6.6.0-07439-gba2303cacfda #6 [ 414.380032] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 414.381177] Workqueue: writeback wb_workfn (flush-253:0) [ 414.381805] Call Trace: [ 414.382136] <TASK> [ 414.382429] dump_stack_lvl+0x91/0xf0 [ 414.382884] mark_lock_irq+0xb3b/0x1260 [ 414.383367] ? __pfx_mark_lock_irq+0x10/0x10 [ 414.383889] ? stack_trace_save+0x8e/0xc0 [ 414.384373] ? __pfx_stack_trace_save+0x10/0x10 [ 414.384903] ? graph_lock+0xcf/0x410 [ 414.385350] ? save_trace+0x3d/0xc70 [ 414.385808] mark_lock.part.20+0x56d/0xa90 [ 414.386317] mark_held_locks+0xb0/0x110 [ 414.386791] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 414.387320] lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.387901] ? _raw_spin_unlock_irq+0x28/0x50 [ 414.388422] trace_hardirqs_on+0x58/0x100 [ 414.388917] _raw_spin_unlock_irq+0x28/0x50 [ 414.389422] __blk_mq_tag_busy+0x1d6/0x2a0 [ 414.389920] __blk_mq_get_driver_tag+0x761/0x9f0 [ 414.390899] blk_mq_dispatch_rq_list+0x1780/0x1ee0 [ 414.391473] ? __pfx_blk_mq_dispatch_rq_list+0x10/0x10 [ 414.392070] ? sbitmap_get+0x2b8/0x450 [ 414.392533] ? __blk_mq_get_driver_tag+0x210/0x9f0 [ 414.393095] __blk_mq_sched_dispatch_requests+0xd99/0x1690 [ 414.393730] ? elv_attempt_insert_merge+0x1b1/0x420 [ 414.394302] ? __pfx___blk_mq_sched_dispatch_requests+0x10/0x10 [ 414.394970] ? lock_acquire+0x18d/0x460 [ 414.395456] ? blk_mq_run_hw_queue+0x637/0xa00 [ 414.395986] ? __pfx_lock_acquire+0x10/0x10 [ 414.396499] blk_mq_sched_dispatch_requests+0x109/0x190 [ 414.397100] blk_mq_run_hw_queue+0x66e/0xa00 [ 414.397616] blk_mq_flush_plug_list.part.17+0x614/0x2030 [ 414.398244] ? __pfx_blk_mq_flush_plug_list.part.17+0x10/0x10 [ 414.398897] ? writeback_sb_inodes+0x241/0xcc0 [ 414.399429] blk_mq_flush_plug_list+0x65/0x80 [ 414.399957] __blk_flush_plug+0x2f1/0x530 [ 414.400458] ? __pfx___blk_flush_plug+0x10/0x10 [ 414.400999] blk_finish_plug+0x59/0xa0 [ 414.401467] wb_writeback+0x7cc/0x920 [ 414.401935] ? __pfx_wb_writeback+0x10/0x10 [ 414.402442] ? mark_held_locks+0xb0/0x110 [ 414.402931] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 414.403462] ? lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.404062] wb_workfn+0x2b3/0xcf0 [ 414.404500] ? __pfx_wb_workfn+0x10/0x10 [ 414.404989] process_scheduled_works+0x432/0x13f0 [ 414.405546] ? __pfx_process_scheduled_works+0x10/0x10 [ 414.406139] ? do_raw_spin_lock+0x101/0x2a0 [ 414.406641] ? assign_work+0x19b/0x240 [ 414.407106] ? lock_is_held_type+0x9d/0x110 [ 414.407604] worker_thread+0x6f2/0x1160 [ 414.408075] ? __kthread_parkme+0x62/0x210 [ 414.408572] ? lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.409168] ? __kthread_parkme+0x13c/0x210 [ 414.409678] ? __pfx_worker_thread+0x10/0x10 [ 414.410191] kthread+0x33c/0x440 [ 414.410602] ? __pfx_kthread+0x10/0x10 [ 414.411068] ret_from_fork+0x4d/0x80 [ 414.411526] ? __pfx_kthread+0x10/0x10 [ 414.411993] ret_from_fork_asm+0x1b/0x30 [ 414.412489] </TASK> When interrupt is turned on while a lock holding by spin_lock_irq it throws a warning because of potential deadlock. blk_mq_prep_dispatch_rq blk_mq_get_driver_tag __blk_mq_get_driver_tag __blk_mq_alloc_driver_tag blk_mq_tag_busy -> tag is already busy // failed to get driver tag blk_mq_mark_tag_wait spin_lock_irq(&wq->lock) -> lock A (&sbq->ws[i].wait) __add_wait_queue(wq, wait) -> wait queue active blk_mq_get_driver_tag __blk_mq_tag_busy -> 1) tag must be idle, which means there can't be inflight IO spin_lock_irq(&tags->lock) -> lock B (hctx->tags) spin_unlock_irq(&tags->lock) -> unlock B, turn on interrupt accidentally -> 2) context must be preempt by IO interrupt to trigger deadlock. As shown above, the deadlock is not possible in theory, but the warning still need to be fixed. Fix it by using spin_lock_irqsave to get lockB instead of spin_lock_irq. Fixes: 4f1731d ("blk-mq: fix potential io hang by wrong 'wake_batch'") Signed-off-by: Li Lingfeng <[email protected]> Reviewed-by: Ming Lei <[email protected]> Reviewed-by: Yu Kuai <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>

…rnel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following batch contains Netfilter updates for net-next: Patch #1 fix checksum calculation in nfnetlink_queue with SCTP, segment GSO packet since skb_zerocopy() does not support GSO_BY_FRAGS, from Antonio Ojea. Patch #2 extend nfnetlink_queue coverage to handle SCTP packets, from Antonio Ojea. Patch #3 uses consume_skb() instead of kfree_skb() in nfnetlink, from Donald Hunter. Patch #4 adds a dedicate commit list for sets to speed up intra-transaction lookups, from Florian Westphal. Patch #5 skips removal of element from abort path for the pipapo backend, ditching the shadow copy of this datastructure is sufficient. Patch #6 moves nf_ct_netns_get() out of nf_conncount_init() to let users of conncoiunt decide when to enable conntrack, this is needed by openvswitch, from Xin Long. Patch #7 pass context to all nft_parse_register_load() in preparation for the next patch. Patches #8 and #9 reject loads from uninitialized registers from control plane to remove register initialization from datapath. From Florian Westphal. * tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: don't initialize registers in nft_do_chain() netfilter: nf_tables: allow loads only when register is initialized netfilter: nf_tables: pass context structure to nft_parse_register_load netfilter: move nf_ct_netns_get out of nf_conncount_init netfilter: nf_tables: do not remove elements if set backend implements .abort netfilter: nf_tables: store new sets in dedicated list netfilter: nfnetlink: convert kfree_skb to consume_skb selftests: netfilter: nft_queue.sh: sctp coverage netfilter: nfnetlink_queue: unbreak SCTP traffic ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

UBSAN reports the following 'subtraction overflow' error when booting in a virtual machine on Android: | Internal error: UBSAN: integer subtraction overflow: 00000000f2005515 [#1] PREEMPT SMP | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-00006-g3cbe9e5abd46-dirty #4 | Hardware name: linux,dummy-virt (DT) | pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : cancel_delayed_work+0x34/0x44 | lr : cancel_delayed_work+0x2c/0x44 | sp : ffff80008002ba60 | x29: ffff80008002ba60 x28: 0000000000000000 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 | x23: 0000000000000000 x22: 0000000000000000 x21: ffff1f65014cd3c0 | x20: ffffc0e84c9d0da0 x19: ffffc0e84cab3558 x18: ffff800080009058 | x17: 00000000247ee1f8 x16: 00000000247ee1f8 x15: 00000000bdcb279d | x14: 0000000000000001 x13: 0000000000000075 x12: 00000a0000000000 | x11: ffff1f6501499018 x10: 00984901651fffff x9 : ffff5e7cc35af000 | x8 : 0000000000000001 x7 : 3d4d455453595342 x6 : 000000004e514553 | x5 : ffff1f6501499265 x4 : ffff1f650ff60b10 x3 : 0000000000000620 | x2 : ffff80008002ba78 x1 : 0000000000000000 x0 : 0000000000000000 | Call trace: | cancel_delayed_work+0x34/0x44 | deferred_probe_extend_timeout+0x20/0x70 | driver_register+0xa8/0x110 | __platform_driver_register+0x28/0x3c | syscon_init+0x24/0x38 | do_one_initcall+0xe4/0x338 | do_initcall_level+0xac/0x178 | do_initcalls+0x5c/0xa0 | do_basic_setup+0x20/0x30 | kernel_init_freeable+0x8c/0xf8 | kernel_init+0x28/0x1b4 | ret_from_fork+0x10/0x20 | Code: f9000fbf 97fffa2f 39400268 37100048 (d42aa2a0) | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: UBSAN: integer subtraction overflow: Fatal exception This is due to shift_and_mask() using a signed immediate to construct the mask and being called with a shift of 31 (WORK_OFFQ_POOL_SHIFT) so that it ends up decrementing from INT_MIN. Use an unsigned constant '1U' to generate the mask in shift_and_mask(). Cc: Tejun Heo <[email protected]> Cc: Lai Jiangshan <[email protected]> Fixes: 1211f3b ("workqueue: Preserve OFFQ bits in cancel[_sync] paths") Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Tejun Heo <[email protected]>

Ido Schimmel says: ==================== Unmask upper DSCP bits - part 2 tl;dr - This patchset continues to unmask the upper DSCP bits in the IPv4 flow key in preparation for allowing IPv4 FIB rules to match on DSCP. No functional changes are expected. Part 1 was merged in commit ("Merge branch 'unmask-upper-dscp-bits-part-1'"). The TOS field in the IPv4 flow key ('flowi4_tos') is used during FIB lookup to match against the TOS selector in FIB rules and routes. It is currently impossible for user space to configure FIB rules that match on the DSCP value as the upper DSCP bits are either masked in the various call sites that initialize the IPv4 flow key or along the path to the FIB core. In preparation for adding a DSCP selector to IPv4 and IPv6 FIB rules, we need to make sure the entire DSCP value is present in the IPv4 flow key. This patchset continues to unmask the upper DSCP bits, but this time in the output route path. Patches #1-#3 unmask the upper DSCP bits in the various places that invoke the core output route lookup functions directly. Patches #4-#6 do the same in three helpers that are widely used in the output path to initialize the TOS field in the IPv4 flow key. The rest of the patches continue to unmask these bits in call sites that invoke the following wrappers around the core lookup functions: Patch #7 - __ip_route_output_key() Patches #8-#12 - ip_route_output_flow() The next patchset will handle the callers of ip_route_output_ports() and ip_route_output_key(). No functional changes are expected as commit 1fa3314 ("ipv4: Centralize TOS matching") moved the masking of the upper DSCP bits to the core where 'flowi4_tos' is matched against the TOS selector. Changes since v1 [1]: * Remove IPTOS_RT_MASK in patch #7 instead of in patch #6 [1] https://lore.kernel.org/netdev/[email protected]/ ==================== Signed-off-by: David S. Miller <[email protected]>

Tariq Toukan says: ==================== net/mlx5: hw counters refactor This is a patchset re-post, see: https://lore.kernel.org/[email protected] In this patchset, Cosmin refactors hw counters and solves perf scaling issue. Series generated against: commit c824deb ("cxgb4: clip_tbl: Fix spelling mistake "wont" -> "won't"") HW counters are central to mlx5 driver operations. They are hardware objects created and used alongside most steering operations, and queried from a variety of places. Most counters are queried in bulk from a periodic task in fs_counters.c. Counter performance is important and as such, a variety of improvements have been done over the years. Currently, counters are allocated from pools, which are bulk allocated to amortize the cost of firmware commands. Counters are managed through an IDR, a doubly linked list and two atomic single linked lists. Adding/removing counters is a complex dance between user contexts requesting it and the mlx5_fc_stats_work task which does most of the work. Under high load (e.g. from connection tracking flow insertion/deletion), the counter code becomes a bottleneck, as seen on flame graphs. Whenever a counter is deleted, it gets added to a list and the wq task is scheduled to run immediately to actually delete it. This is done via mod_delayed_work which uses an internal spinlock. In some tests, waiting for this spinlock took up to 66% of all samples. This series refactors the counter code to use a more straight-forward approach, avoiding the mod_delayed_work problem and making the code easier to understand. For that: - patch #1 moves counters data structs to a more appropriate place. - patch #2 simplifies the bulk query allocation scheme by using vmalloc. - patch #3 replaces the IDR+3 lists with an xarray. This is the main patch of the series, solving the spinlock congestion issue. - patch #4 removes an unnecessary cacheline alignment causing a lot of memory to be wasted. - patches #5 and #6 are small cleanups enabled by the refactoring. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Edward Cree says: ==================== sfc: per-queue stats This series implements the netdev_stat_ops interface for per-queue statistics in the sfc driver, partly using existing counters that were originally added for ethtool -S output. Changed in v4: * remove RFC tags Changed in v3: * make TX stats count completions rather than enqueues * add new patch #4 to account for XDP TX separately from netdev traffic and include it in base_stats * move the tx_queue->old_* members out of the fastpath cachelines * note on patch #6 that our hw_gso stats still count enqueues * RFC since net-next is closed right now Changed in v2: * exclude (dedicated) XDP TXQ stats from per-queue TX stats * explain patch #3 better ==================== Signed-off-by: David S. Miller <[email protected]>

Daniel Machon says: ==================== net: sparx5: prepare for lan969x switch driver == Description: This series is the first of a multi-part series, that prepares and adds support for the new lan969x switch driver. The upstreaming efforts is split into multiple series (might change a bit as we go along): 1) Prepare the Sparx5 driver for lan969x (this series) 2) Add support lan969x (same basic features as Sparx5 provides + RGMII, excl. FDMA and VCAP) 3) Add support for lan969x FDMA 4) Add support for lan969x VCAP == Lan969x in short: The lan969x Ethernet switch family [1] provides a rich set of switching features and port configurations (up to 30 ports) from 10Mbps to 10Gbps, with support for RGMII, SGMII, QSGMII, USGMII, and USXGMII, ideal for industrial & process automation infrastructure applications, transport, grid automation, power substation automation, and ring & intra-ring topologies. The LAN969x family is hardware and software compatible and scalable supporting 46Gbps to 102Gbps switch bandwidths. == Preparing Sparx5 for lan969x: The lan969x switch chip reuses many of the IP's of the Sparx5 switch chip, therefore it has been decided to add support through the existing Sparx5 driver, in order to avoid a bunch of duplicate code. However, in order to reuse the Sparx5 switch driver, we have to introduce some mechanisms to handle the chip differences that are there. These mechanisms are: - Platform match data to contain all the differences that needs to be handled (constants, ops etc.) - Register macro indirection layer so that we can reuse the existing register macros. - Function for branching out on platform type where required. In some places we ops out functions and in other places we branch on the chip type. Exactly when we choose one over the other, is an estimate in each case. After this series is applied, the Sparx5 driver will be prepared for lan969x and still function exactly as before. == Patch breakdown: Patch #1 adds private match data Patch #2 adds register macro indirection layer Patch #3-#4 does some preparation work Patch #5-#7 adds chip constants and updates the code to use them Patch #8-#13 adds and uses ops for handling functions differently on the two platforms. Patch #14 adds and uses a macro for branching out on the chip type. Patch #15 (NEW) redefines macros for internal ports and PGID's. [1] https://www.microchip.com/en-us/product/lan9698 To: David S. Miller <[email protected]> To: Eric Dumazet <[email protected]> To: Jakub Kicinski <[email protected]> To: Paolo Abeni <[email protected]> To: Lars Povlsen <[email protected]> To: Steen Hegelund <[email protected]> To: [email protected] To: [email protected] To: [email protected] To: Richard Cochran <[email protected]> To: [email protected] To: [email protected] To: [email protected] To: [email protected] To: [email protected] To: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Daniel Machon <[email protected]> ==================== Link: https://patch.msgid.link/20241004-b4-sparx5-lan969x-switch-driver-v2-0-d3290f581663@microchip.com Signed-off-by: Paolo Abeni <[email protected]>

Eric Dumazet says: ==================== net: remove RTNL from fib_seq_sum() This series is inspired by a syzbot report showing rtnl contention and one thread blocked in: 7 locks held by syz-executor/10835: #0: ffff888033390420 (sb_writers#8){.+.+}-{0:0}, at: file_start_write include/linux/fs.h:2931 [inline] #0: ffff888033390420 (sb_writers#8){.+.+}-{0:0}, at: vfs_write+0x224/0xc90 fs/read_write.c:679 #1: ffff88806df6bc88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x1ea/0x500 fs/kernfs/file.c:325 #2: ffff888026fcf3c8 (kn->active#50){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x20e/0x500 fs/kernfs/file.c:326 #3: ffffffff8f56f848 (nsim_bus_dev_list_lock){+.+.}-{3:3}, at: new_device_store+0x1b4/0x890 drivers/net/netdevsim/bus.c:166 #4: ffff88805e0140e8 (&dev->mutex){....}-{3:3}, at: device_lock include/linux/device.h:1014 [inline] #4: ffff88805e0140e8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x8e/0x520 drivers/base/dd.c:1005 #5: ffff88805c5fb250 (&devlink->lock_key#55){+.+.}-{3:3}, at: nsim_drv_probe+0xcb/0xb80 drivers/net/netdevsim/dev.c:1534 #6: ffffffff8fcd1748 (rtnl_mutex){+.+.}-{3:3}, at: fib_seq_sum+0x31/0x290 net/core/fib_notifier.c:46 ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

mswiatko merged commit 7a1a7af into generic-metadata Aug 9, 2021

mswiatko deleted the generic-metadata-xdp-flags branch August 9, 2021 10:30

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

uapi: add metadata flag to xdp flags #4

uapi: add metadata flag to xdp flags #4

mswiatko commented Aug 9, 2021

uapi: add metadata flag to xdp flags #4

uapi: add metadata flag to xdp flags #4

Conversation

mswiatko commented Aug 9, 2021