Merge branch 'various-mtk_eth_soc-cleanups'

Russell King says:

====================
Various mtk_eth_soc cleanups

Here are a number of patches that do a bit of cleanup to mtk_eth_soc.

The first patch cleans up mtk_gmac0_rgmii_adjust(), which is the
troublesome function preventing the driver becoming a post-March2020
phylink driver. It doesn't solve that problem, merely makes the code
easier to follow by getting rid of repeated tenary operators.

The second patch moves the check for DDR2 memory to the initialisation
of phylink's supported_interfaces - if TRGMII is not possible for some
reason, we should not be erroring out in phylink MAC operations when
that can be determined prior to phylink creation.

The third patch removes checks from mtk_mac_config() that are done
when initialising supported_interfaces - phylink will not call
mtk_mac_config() with an interface that was not marked as supported,
so these checks are redundant.

The last patch removes the remaining vestiges of REVMII and RMII
support, which appears to be entirely unused.

These shouldn't conflict with Daniel's patch set, but if they do I
will rework as appropriate.
====================

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>

drivers/net/ethernet/mediatek/mtk_eth_soc.c

@@ -374,17 +374,6 @@ static int mt7621_gmac0_rgmii_adjust(struct mtk_eth *eth,
 {
 	u32 val;
 
-	/* Check DDR memory type.
-	 * Currently TRGMII mode with DDR2 memory is not supported.
-	 */
-	regmap_read(eth->ethsys, ETHSYS_SYSCFG, &val);
-	if (interface == PHY_INTERFACE_MODE_TRGMII &&
-	    val & SYSCFG_DRAM_TYPE_DDR2) {
-		dev_err(eth->dev,
-			"TRGMII mode with DDR2 memory is not supported!\n");
-		return -EOPNOTSUPP;
-	}
-
 	val = (interface == PHY_INTERFACE_MODE_TRGMII) ?
 		ETHSYS_TRGMII_MT7621_DDR_PLL : 0;
 
@@ -397,38 +386,42 @@ static int mt7621_gmac0_rgmii_adjust(struct mtk_eth *eth,
 static void mtk_gmac0_rgmii_adjust(struct mtk_eth *eth,
 				   phy_interface_t interface, int speed)
 {
-	u32 val;
+	unsigned long rate;
+	u32 tck, rck, intf;
 	int ret;
 
 	if (interface == PHY_INTERFACE_MODE_TRGMII) {
 		mtk_w32(eth, TRGMII_MODE, INTF_MODE);
-		val = 500000000;
-		ret = clk_set_rate(eth->clks[MTK_CLK_TRGPLL], val);
+		ret = clk_set_rate(eth->clks[MTK_CLK_TRGPLL], 500000000);
 		if (ret)
 			dev_err(eth->dev, "Failed to set trgmii pll: %d\n", ret);
 		return;
 	}
 
-	val = (speed == SPEED_1000) ?
-		INTF_MODE_RGMII_1000 : INTF_MODE_RGMII_10_100;
-	mtk_w32(eth, val, INTF_MODE);
+	if (speed == SPEED_1000) {
+		intf = INTF_MODE_RGMII_1000;
+		rate = 250000000;
+		rck = RCK_CTRL_RGMII_1000;
+		tck = TCK_CTRL_RGMII_1000;
+	} else {
+		intf = INTF_MODE_RGMII_10_100;
+		rate = 500000000;
+		rck = RCK_CTRL_RGMII_10_100;
+		tck = TCK_CTRL_RGMII_10_100;
+	}
+
+	mtk_w32(eth, intf, INTF_MODE);
 
 	regmap_update_bits(eth->ethsys, ETHSYS_CLKCFG0,
 			   ETHSYS_TRGMII_CLK_SEL362_5,
 			   ETHSYS_TRGMII_CLK_SEL362_5);
 
-	val = (speed == SPEED_1000) ? 250000000 : 500000000;
-	ret = clk_set_rate(eth->clks[MTK_CLK_TRGPLL], val);
+	ret = clk_set_rate(eth->clks[MTK_CLK_TRGPLL], rate);
 	if (ret)
 		dev_err(eth->dev, "Failed to set trgmii pll: %d\n", ret);
 
-	val = (speed == SPEED_1000) ?
-		RCK_CTRL_RGMII_1000 : RCK_CTRL_RGMII_10_100;
-	mtk_w32(eth, val, TRGMII_RCK_CTRL);
-
-	val = (speed == SPEED_1000) ?
-		TCK_CTRL_RGMII_1000 : TCK_CTRL_RGMII_10_100;
-	mtk_w32(eth, val, TRGMII_TCK_CTRL);
+	mtk_w32(eth, rck, TRGMII_RCK_CTRL);
+	mtk_w32(eth, tck, TRGMII_TCK_CTRL);
 }
 
 static struct phylink_pcs *mtk_mac_select_pcs(struct phylink_config *config,
@@ -465,19 +458,11 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
 		/* Setup soc pin functions */
 		switch (state->interface) {
 		case PHY_INTERFACE_MODE_TRGMII:
-			if (mac->id)
-				goto err_phy;
-			if (!MTK_HAS_CAPS(mac->hw->soc->caps,
-					  MTK_GMAC1_TRGMII))
-				goto err_phy;
-			fallthrough;
 		case PHY_INTERFACE_MODE_RGMII_TXID:
 		case PHY_INTERFACE_MODE_RGMII_RXID:
 		case PHY_INTERFACE_MODE_RGMII_ID:
 		case PHY_INTERFACE_MODE_RGMII:
 		case PHY_INTERFACE_MODE_MII:
-		case PHY_INTERFACE_MODE_REVMII:
-		case PHY_INTERFACE_MODE_RMII:
 			if (MTK_HAS_CAPS(eth->soc->caps, MTK_RGMII)) {
 				err = mtk_gmac_rgmii_path_setup(eth, mac->id);
 				if (err)
@@ -487,11 +472,9 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
 		case PHY_INTERFACE_MODE_1000BASEX:
 		case PHY_INTERFACE_MODE_2500BASEX:
 		case PHY_INTERFACE_MODE_SGMII:
-			if (MTK_HAS_CAPS(eth->soc->caps, MTK_SGMII)) {
-				err = mtk_gmac_sgmii_path_setup(eth, mac->id);
-				if (err)
-					goto init_err;
-			}
+			err = mtk_gmac_sgmii_path_setup(eth, mac->id);
+			if (err)
+				goto init_err;
 			break;
 		case PHY_INTERFACE_MODE_GMII:
 			if (MTK_HAS_CAPS(eth->soc->caps, MTK_GEPHY)) {
@@ -539,21 +522,13 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
 			}
 		}
 
-		ge_mode = 0;
 		switch (state->interface) {
 		case PHY_INTERFACE_MODE_MII:
 		case PHY_INTERFACE_MODE_GMII:
 			ge_mode = 1;
 			break;
-		case PHY_INTERFACE_MODE_REVMII:
-			ge_mode = 2;
-			break;
-		case PHY_INTERFACE_MODE_RMII:
-			if (mac->id)
-				goto err_phy;
-			ge_mode = 3;
-			break;
 		default:
+			ge_mode = 0;
 			break;
 		}
 
@@ -4329,6 +4304,7 @@ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
 	struct mtk_mac *mac;
 	int id, err;
 	int txqs = 1;
+	u32 val;
 
 	if (!_id) {
 		dev_err(eth->dev, "missing mac id\n");
@@ -4405,6 +4381,15 @@ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
 		__set_bit(PHY_INTERFACE_MODE_TRGMII,
 			  mac->phylink_config.supported_interfaces);
 
+	/* TRGMII is not permitted on MT7621 if using DDR2 */
+	if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_GMAC1_TRGMII) &&
+	    MTK_HAS_CAPS(mac->hw->soc->caps, MTK_TRGMII_MT7621_CLK)) {
+		regmap_read(eth->ethsys, ETHSYS_SYSCFG, &val);
+		if (val & SYSCFG_DRAM_TYPE_DDR2)
+			__clear_bit(PHY_INTERFACE_MODE_TRGMII,
+				    mac->phylink_config.supported_interfaces);
+	}
+
 	if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_SGMII)) {
 		__set_bit(PHY_INTERFACE_MODE_SGMII,
 			  mac->phylink_config.supported_interfaces);