Skip to content

alitas/snowflake-connector-net

 
 

Repository files navigation

Snowflake Connector for .NET

NuGet License

The Snowflake .NET connector supports the the following .NET framework and libraries versions:

  • .NET Framework 4.7.2
  • .NET Framework 4.7.3
  • .NET Core 6.0

Please refer to the Notice section below for information about safe usage of the .NET Driver

Building the Package

Prerequisites

The Snowflake .NET connector supports only Windows.

This project is developed under Visual Studio 2017. Earlier versions of Visual Studio are not supported.

Steps

  1. Check out the source code from GitHub:
git clone [email protected]:snowflakedb/snowflake-connector-net snowflake-connector-net
  1. Pull down the dependency:
cd snowflake-connector-net
nuget restore
  1. Build the solution file
msbuild snowflake-connector-net.sln /p:Configuration=Release

Installing the Package

Package ID for Snowflake Connector for .Net is Snowflake.Data.

Packages can be directly downloaded from nuget.org.

It can also be downloaded using Visual Studio UI (Tools > NuGet Package Manager > Manage NuGet Packages for Solution and search for "Snowflake.Data")

Alternatively, packages can also be downloaded using Package Manager Console:

PM> Install-Package Snowflake.Data

Testing the Connector

Before running tests, create a parameters.json file under Snowflake.Data.Tests\ directory. In this file, specify username, password and account info that tests will run against. Here is a sample parameters.json file

{
  "testconnection": {
    "SNOWFLAKE_TEST_USER": "snowman",
    "SNOWFLAKE_TEST_PASSWORD": "XXXXXXX",
    "SNOWFLAKE_TEST_ACCOUNT": "TESTACCOUNT",
    "SNOWFLAKE_TEST_WAREHOUSE": "TESTWH",
    "SNOWFLAKE_TEST_DATABASE": "TESTDB",
    "SNOWFLAKE_TEST_SCHEMA": "TESTSCHEMA",
    "SNOWFLAKE_TEST_ROLE": "TESTROLE",
    "SNOWFLAKE_TEST_HOST": "testaccount.snowflakecomputing.com"
  }
}

Command Prompt

The build solution file builds the connector and tests binaries. Issue the following command from the command line to run the tests. The test binary is located in the Debug directory if you built the solution file in Debug mode.

cd Snowflake.Data.Tests
dotnet test -f netcoreapp6.0

Tests can also be run under code coverage:

OpenCover.4.6.519\tools\OpenCover.Console.exe -target:"dotnet.exe" -returntargetcode -targetargs:"test -f netcoreapp6.0" -register:user -filter:"+[Snowflake.Data]*" -output:"netcoreapp6.0_coverage.xml" -oldStyle 

Visual Studio 2017

Tests can also be run under Visual Studio 2017. Open the solution file in Visual Studio 2017 and run tests using Test Explorer.

Usage

Create a Connection

To connect to Snowflake, specify a valid connection string composed of key-value pairs separated by semicolons, i.e "<key1>=<value1>;<key2>=<value2>...".

Note: If the keyword or value contains an equal sign (=), you must precede the equal sign with another equal sign. For example, if the keyword is "key" and the value is "value_part1=value_part2", use "key=value_part1==value_part2".

The following table lists all valid connection properties:

Connection Property Required Comment
ACCOUNT Yes Your full account name might include additional segments that identify the region and cloud platform where your account is hosted
APPLICATION No Snowflake partner use only: Specifies the name of a partner application to connect through .NET. The name must match the following pattern: ^[A-Za-z]([A-Za-z0-9.-]){1,50}$ (one letter followed by 1 to 50 letter, digit, .,- or, _ characters).
DB No
HOST No Specifies the hostname for your account in the following format: <ACCOUNT>.snowflakecomputing.com.
If no value is specified, the driver uses <ACCOUNT>.snowflakecomputing.com.
PASSWORD Depends Required if AUTHENTICATOR is set to snowflake (the default value) or the URL for native SSO through Okta. Ignored for all the other authentication types.
ROLE No
SCHEMA No
USER Yes If AUTHENTICATOR is set to externalbrowser or the URL for native SSO through Okta, set this to the login name for your identity provider (IdP).
WAREHOUSE No
CONNECTION_TIMEOUT No Total timeout in seconds when connecting to Snowflake. The default is 120 seconds
CLIENT_SESSION_KEEP_ALIVE No Whether to keep the current session active after a period of inactivity, or to force the user to login again. If the value is true, Snowflake keeps the session active indefinitely, even if there is no activity from the user. If the value is false, the user must log in again after four hours of inactivity. The default is false. Setting this value overrides the server session property for the current session.
CLIENT_SESSION_KEEP_ALIVE_HEARTBEAT_FREQUENCY No Number of seconds in-between client attempts to update the token for the session.
DISABLERETRY No Set this property to true to prevent the driver from reconnecting automatically when the connection fails or drops. The default value is false.
AUTHENTICATOR No The method of authentication. Currently supports the following values:
- snowflake (default): You must also set USER and PASSWORD.
- the URL for native SSO through Okta: You must also set USER and PASSWORD.
- externalbrowser: You must also set USER.
- snowflake_jwt: You must also set PRIVATE_KEY_FILE or PRIVATE_KEY.
- oauth: You must also set TOKEN.
VALIDATE_DEFAULT_PARAMETERS No Whether DB, SCHEMA and WAREHOUSE should be verified when making connection. Default to be true.
PRIVATE_KEY_FILE Depends The path to the private key file to use for key-pair authentication. Must be used in combination with AUTHENTICATOR=snowflake_jwt
PRIVATE_KEY_PWD No The passphrase to use for decrypting the private key, if the key is encrypted.
PRIVATE_KEY Depends The private key to use for key-pair authentication. Must be used in combination with AUTHENTICATOR=snowflake_jwt.
If the private key value includes any equal signs (=), make sure to replace each equal sign with two signs (==) to ensure that the connection string is parsed correctly.
TOKEN Depends The OAuth token to use for OAuth authentication. Must be used in combination with AUTHENTICATOR=oauth.
INSECUREMODE No Set to true to disable the certificate revocation list check. Default is false.
USEPROXY No Set to true if you need to use a proxy server. The default value is false.

This parameter was introduced in v2.0.4.
PROXYHOST Depends The hostname of the proxy server.

If USEPROXY is set to true, you must set this parameter.

This parameter was introduced in v2.0.4.
PROXYPORT Depends The port number of the proxy server.

If USEPROXY is set to true, you must set this parameter.

This parameter was introduced in v2.0.4.
PROXYUSER No The username for authenticating to the proxy server.

This parameter was introduced in v2.0.4.
PROXYPASSWORD Depends The password for authenticating to the proxy server.

If USEPROXY is true and PROXYUSER is set, you must set this parameter.

This parameter was introduced in v2.0.4.
NONPROXYHOSTS No The list of hosts that the driver should connect to directly, bypassing the proxy server. Separate the hostnames with a pipe symbol (|). You can also use an asterisk (*) as a wildcard.

This parameter was introduced in v2.0.4.

Password-based Authentication

The following example demonstrates how to open a connection to Snowflake. This example uses a password for authentication.

using (IDbConnection conn = new SnowflakeDbConnection())
{
    conn.ConnectionString = "account=testaccount;user=testuser;password=XXXXX;db=testdb;schema=testschema";

    conn.Open();
    
    conn.Close();
}

Beginning with version 2.0.18, the .NET connector uses Microsoft DbConnectionStringBuilder to follow the .NET specification for escaping characters in connection strings.

The following examples show how you can include different types of special characters in a connection string:

  • To include a single quote (') character:

    string connectionString = String.Format(
      "account=testaccount; " +
      "user=testuser; " +
      "password=test'password;"
    );
  • To include a double quote (") character:

    string connectionString = String.Format(
      "account=testaccount; " +
      "user=testuser; " +
      "password=test\"password;"
    );
  • To include a semicolon (;):

    string connectionString = String.Format(
      "account=testaccount; " +
      "user=testuser; " +
      "password=\"test;password\";"
    );
  • To include an equal sign (=):

    string connectionString = String.Format(
      "account=testaccount; " +
      "user=testuser; " +
      "password=test=password;"
    );

    Note that previously you needed to use a double equal sign (==) to escape the character. However, beginning with version 2.0.18, you can use a single equal size.

Other Authentication Methods

If you are using a different method for authentication, see the examples below:

  • Key-pair authentication

    After setting up key-pair authentication, you can specify the private key for authentication in one of the following ways:

    • Specify the file containing an unencrypted private key:

      using (IDbConnection conn = new SnowflakeDbConnection())
      {
          conn.ConnectionString = "account=testaccount;authenticator=snowflake_jwt;user=testuser;private_key_file={pathToThePrivateKeyFile};db=testdb;schema=testschema";
      
          conn.Open();
      
          conn.Close();
      }

      where:

      • {pathToThePrivateKeyFile} is the path to the file containing the unencrypted private key.
    • Specify the file containing an encrypted private key:

      using (IDbConnection conn = new SnowflakeDbConnection())
      {
          conn.ConnectionString = "account=testaccount;authenticator=snowflake_jwt;user=testuser;private_key_file={pathToThePrivateKeyFile};private_key_pwd={passwordForDecryptingThePrivateKey};db=testdb;schema=testschema";
      
          conn.Open();
      
          conn.Close();
      }

      where:

      • {pathToThePrivateKeyFile} is the path to the file containing the unencrypted private key.
      • {passwordForDecryptingThePrivateKey} is the password for decrypting the private key.
    • Specify an unencrypted private key (read from a file):

      using (IDbConnection conn = new SnowflakeDbConnection())
      {
          string privateKeyContent = File.ReadAllText({pathToThePrivateKeyFile}).Replace("=", "==");
      
          conn.ConnectionString = String.Format("account=testaccount;authenticator=snowflake_jwt;user=testuser;private_key={0};db=testdb;schema=testschema", privateKeyContent);
      
          conn.Open();
      
          conn.Close();
      }

      where:

      • {pathToThePrivateKeyFile} is the path to the file containing the unencrypted private key.
  • OAuth

    After setting up OAuth, set AUTHENTICATOR=oauth and TOKEN to the OAuth token in the connection string.

    using (IDbConnection conn = new SnowflakeDbConnection())
    {
        conn.ConnectionString = "account=testaccount;user=testuser;authenticator=oauth;token={oauthTokenValue};db=testdb;schema=testschema";
    
        conn.Open();
      
        conn.Close();
    }

    where:

    • {oauthTokenValue} is the oauth token to use for authentication.
  • Browser-based SSO

    In the connection string, set AUTHENTICATOR=externalbrowser, and set USER to the login name for your IdP.

    using (IDbConnection conn = new SnowflakeDbConnection())
    {
        conn.ConnectionString = "account=testaccount;authenticator=externalbrowser;user={login_name_for_IdP};db=testdb;schema=testschema";
    
        conn.Open();
    
        conn.Close();
    }

    where:

    • {login_name_for_IdP} is your login name for your IdP.
  • Native SSO through Okta

    In the connection string, set AUTHENTICATOR to the URL of the endpoint for your Okta account, and set USER to the login name for your IdP.

    using (IDbConnection conn = new SnowflakeDbConnection())
    {
        conn.ConnectionString = "account=testaccount;authenticator={okta_url_endpoint};user={login_name_for_IdP};db=testdb;schema=testschema";
    
        conn.Open();
    
        conn.Close();
    }

    where:

    • {okta_url_endpoint} is the URL for the endpoint for your Okta account (e.g. https://<okta_account_name>.okta.com).
    • {login_name_for_IdP} is your login name for your IdP.

In v2.0.4 and later releases, you can configure the driver to connect through a proxy server. The following example configures the driver to connect through the proxy server myproxyserver on port 8888. The driver authenticates to the proxy server as the user test with the password test:

using (IDbConnection conn = new SnowflakeDbConnection())
{
    conn.ConnectionString = "account=testaccount;user=testuser;password=XXXXX;db=testdb;schema=testschema;useProxy=true;proxyHost=myproxyserver;proxyPort=8888;proxyUser=test;proxyPassword=test";

    conn.Open();
    
    conn.Close();
}

Using Connection Pools

Instead of creating a connection each time your client application needs to access Snowflake, you can define a cache of Snowflake connections that can be reused as needed. Connection pooling usually reduces the lag time to make a connection. However, it can slow down client failover to an alternative DNS when a DNS problem occurs.

The Snowflake .NET driver provides the following functions for managing connection pools.

Function Description
SnowflakeDbConnectionPool.ClearAllPools() Removes all connections from the connection pool.
SnowflakeDbConnection.SetMaxPoolSize(n) Sets the maximum number of connections for the connection pool, where n is the number of connections.
SnowflakeDBConnection.SetTimeout(n) Sets the number of seconds to keep an unresponsive connection in the connection pool.
SnowflakeDbConnectionPool.GetCurrentPoolSize() Returns the number of connections currently in the connection pool.
SnowflakeDbConnectionPool.SetPooling() Determines whether to enable (true) or disable (false) connecing pooling. Default: true.

The following sample demonstrates how to monitor the size of a connection pool as connections are added and dropped from the pool.

public void TestConnectionPoolClean()
{
  SnowflakeDbConnectionPool.ClearAllPools();
  SnowflakeDbConnectionPool.SetMaxPoolSize(2);
  var conn1 = new SnowflakeDbConnection();
  conn1.ConnectionString = ConnectionString;
  conn1.Open();
  Assert.AreEqual(ConnectionState.Open, conn1.State);

  var conn2 = new SnowflakeDbConnection();
  conn2.ConnectionString = ConnectionString + " retryCount=1";
  conn2.Open();
  Assert.AreEqual(ConnectionState.Open, conn2.State);
  Assert.AreEqual(0, SnowflakeDbConnectionPool.GetCurrentPoolSize());
  conn1.Close();
  conn2.Close();
  Assert.AreEqual(2, SnowflakeDbConnectionPool.GetCurrentPoolSize());
  var conn3 = new SnowflakeDbConnection();
  conn3.ConnectionString = ConnectionString + "  retryCount=2";
  conn3.Open();
  Assert.AreEqual(ConnectionState.Open, conn3.State);

  var conn4 = new SnowflakeDbConnection();
  conn4.ConnectionString = ConnectionString + "  retryCount=3";
  conn4.Open();
  Assert.AreEqual(ConnectionState.Open, conn4.State);

  conn3.Close();
  Assert.AreEqual(2, SnowflakeDbConnectionPool.GetCurrentPoolSize());
  conn4.Close();
  Assert.AreEqual(2, SnowflakeDbConnectionPool.GetCurrentPoolSize());

  Assert.AreEqual(ConnectionState.Closed, conn1.State);
  Assert.AreEqual(ConnectionState.Closed, conn2.State);
  Assert.AreEqual(ConnectionState.Closed, conn3.State);
  Assert.AreEqual(ConnectionState.Closed, conn4.State);
}

Mapping .NET and Snowflake Data Types

The .NET driver supports the following mappings from .NET to Snowflake data types.

.NET Framekwork Data Type Data Type in Snowflake
int, long NUMBER(38, 0)
decimal NUMBER(38, <scale>)
double REAL
string TEXT
bool BOOLEAN
byte BINARY
datetime DATE

Run a Query and Read Data

using (IDbConnection conn = new SnowflakeDbConnection())
{
    conn.ConnectionString = connectionString;
    conn.Open();

    IDbCommand cmd = conn.CreateCommand();
    cmd.CommandText = "select * from t";
    IDataReader reader = cmd.ExecuteReader();

    while(reader.Read())
    {
        Console.WriteLine(reader.GetString(0));
    }

    conn.Close();
}

Note that for a TIME column, the reader returns a System.DateTime value. If you need a System.TimeSpan column, call the getTimeSpan method in SnowflakeDbDataReader. This method was introduced in the v2.0.4 release.

Note that because this method is not available in the generic IDataReader interface, you must cast the object as SnowflakeDbDataReader before calling the method. For example:

TimeSpan timeSpanTime = ((SnowflakeDbDataReader)reader).GetTimeSpan(13);

Bind Parameter

This example shows how bound parameters are converted from C# data types to Snowflake data types. For example, if the data type of the Snowflake column is INTEGER, then you can bind C# data types Int32 or Int16.

This example inserts 3 rows into a table with one column.

using (IDbConnection conn = new SnowflakeDbConnection())
{
    conn.ConnectionString = connectionString;
    conn.Open();

    IDbCommand cmd = conn.CreateCommand();
    cmd.CommandText = "create or replace table T(cola int)";
    int count = cmd.ExecuteNonQuery();
    Assert.AreEqual(0, count);

    IDbCommand cmd = conn.CreateCommand();
    cmd.CommandText = "insert into t values (?), (?), (?)";

    var p1 = cmd.CreateParameter();
    p1.ParameterName = "1";
    p1.Value = 10;
    p1.DbType = DbType.Int32;
    cmd.Parameters.Add(p1);

    var p2 = cmd.CreateParameter();
    p2.ParameterName = "2";
    p2.Value = 10000L;
    p2.DbType = DbType.Int32;
    cmd.Parameters.Add(p2);

    var p3 = cmd.CreateParameter();
    p3.ParameterName = "3";
    p3.Value = (short)1;
    p3.DbType = DbType.Int16;
    cmd.Parameters.Add(p3);

    var count = cmd.ExecuteNonQuery();
    Assert.AreEqual(3, count);

    cmd.CommandText = "drop table if exists T";
    count = cmd.ExecuteNonQuery();
    Assert.AreEqual(0, count);

    conn.Close();
}

Bind Array Variables

The sample code creates a table with a single integer column and then uses array binding to populate the table with values 0 to 70000.

using (IDbConnection conn = new SnowflakeDbConnection())
{
	conn.ConnectionString = ConnectionString;
	conn.Open();

	using (IDbCommand cmd = conn.CreateCommand())
	{
		cmd.CommandText = "create or replace table putArrayBind(colA integer)";
		cmd.ExecuteNonQuery();

		string insertCommand = "insert into putArrayBind values (?)";
		cmd.CommandText = insertCommand;

		int total = 70000;

		List<int> arrint = new List<int>();
		for (int i = 0; i < total; i++)
		{
			arrint.Add(i);
		}
		var p1 = cmd.CreateParameter();
		p1.ParameterName = "1";
		p1.DbType = DbType.Int16;
		p1.Value = arrint.ToArray();
		cmd.Parameters.Add(p1);

		count = cmd.ExecuteNonQuery(); // count = 70000
	}

	conn.Close();
}

Close the Connection

To close the connection, call the Close method of SnowflakeDbConnection.

If you want to avoid blocking threads while the connection is closing, call the CloseAsync method instead, passing in a CancellationToken. This method was introduced in the v2.0.4 release.

Note that because this method is not available in the generic IDbConnection interface, you must cast the object as SnowflakeDbConnection before calling the method. For example:

CancellationTokenSource cancellationTokenSource  = new CancellationTokenSource();
// Close the connection
((SnowflakeDbConnection)conn).CloseAsync(cancellationTokenSource.Token);

Logging

The Snowflake Connector for .NET uses log4net as the logging framework.

Here is a sample app.config file that uses log4net

  <configSections>
    <section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler, log4net"/>
  </configSections>

  <log4net>
    <appender name="MyRollingFileAppender" type="log4net.Appender.RollingFileAppender">
      <file value="snowflake_dotnet.log" />
      <appendToFile value="true"/>
      <rollingStyle value="Size" />
      <maximumFileSize value="10MB" />
      <staticLogFileName value="true" />
      <maxSizeRollBackups value="10" />
      <layout type="log4net.Layout.PatternLayout">
        <!-- <header value="[DateTime]  [Thread]  [Level]  [ClassName] Message&#13;&#10;" /> -->
        <conversionPattern value="[%date] [%t] [%-5level] [%logger] %message%newline" />
      </layout>
    </appender>

    <root>
      <level value="ALL" />
      <appender-ref ref="MyRollingFileAppender" />
    </root>
  </log4net>

Notice

  1. CVE-2019-0820 -
    This CVE has been reported in systems.text.regularexpressions.dll which is used by the regular expressions packages - systems.text.regularexpressions.4.3.1.nupkg. This vulnerability manifests itself ONLY when the following .NET runtime environments are being used:
  • v1.0 branch: 1.0 - 1.0.16 (exclusive)

  • v1.1 branch: 1.1 - 1.1.13 (exclusive)

  • v2.1 branch: 2.1 - 2.1.11 (exclusive)

  • v2.2 branch: 2.2 - 2.2.5 (exclusive)

    In order to mitigate this vulnerability, we recommend to update to higher Runtime versions. If you're already running on a .NET Runtime version higher than the ones listed above, you're not going to be affected by this vulnerability.

  1. Logging -
    Snowflake has identified an issue on Feb 20, 2020, with our logging code for the .NET drivers in which we write Master and Session tokens in the clear to the debug logs. The debug logs are collected locally on the drive where your programs are running. This issue impacts only those instances where the programs are run with debug flags enabled, i.e. setting the log level value= "Debug” or “All" in the log4Net config

    Under normal conditions, the Master and Session tokens captured in the log files are short-lived for about 4 and 1 hours, respectively. They will expire after the 4-hour window unless explicitly refreshed, in which case they could be refreshed indefinitely.

    If you are using the .NET driver please take the following action:

  • Upgrade to the latest version(v1.1.0) as soon as possible.
  • Remove all “Debugging” options for any existing .NET drivers in use.
  • Delete any logs collected thus far and make sure that all copies are deleted.
  • If you cannot upgrade for any reason, please ensure all debugging is disabled
  • If you are concerned about a potential compromise, contact Snowflake Customer Support for assistance with invalidating all active sessions/tokens.
  1. Global HTTP connection settings -
    Snowflake has identified an issue where the driver is globally enforcing TLS 1.2 and certificate revocation checks with the .NET Driver v1.2.1 and earlier versions.
    Starting with v2.0.0, the driver will set these locally.

Note that the driver is now targeting .NET 6.0. When upgrading, you might also need to run “Update-Package -reinstall” to update the dependencies.

About

Snowflake Connector for .NET

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C# 100.0%