Error #31 after auto-generating the configuartion

[TheKilroy]

I have just installed Jarvis 2.2.2 on a Raspberry Pi4
Install was OK and while generating an automatic configuration the error message #31 appeared (see attached screenshot)

Important might be the fact that the server and the devices are in a remote network. The browser with the desktop is located in a local network.

Remote network: 192.168.1.0/24
Local network: 192.168.99.0/24
The connection between both networks is not very fast. It is a WiFi connection between to buildings. The remote network must route all traffic to the internet via the local network.

I will try to remove the adapter and will NOT generate an automatic configuration.

[TheKilroy]

Re-installed the instance and used manual creation and now I got a step further.
Clicking the continue button now brought another error.

[TheKilroy]

Works when adding devices manually.

I also have a Raspberry Pi4 for testing in the local network. Here it worked fine and generated a usable configuration.

[Zefau]

Probably best if you start with v3

[TheKilroy]

OK ... will give it a try.

[Zefau]

please move to v3