Adding NanoXplore NG-Ultra support (#1397)

* ng-ultra: new architecture * Implementation as in D2 deliverable * Support for nxdesignsuite-24.0.0.0-20240429T102300 * Save memory by directly outputing json * Add support for bidirectional IOs * cleanup * Create BFRs properly * Add IOM insertion * Cleanup * Block certain pips depending of DDFR mode * Add LUT bypass to improve routability * Add bypass for CSC mode of GCK * Fix IOM case * Initial memory support * Better RF/XRF handling * fix * RF placement and legalization * Disconnect non available ports for NX_RAM * cleanup * Add RFB/RAM context support for latest release * Remove ports that must not be used * Proper port used only on RFB * Add structure for clock sinks * Use cell type where applicable * Add clock sinks for other cell types * Validation check fixes * Commented too restrictive placement * Added more crossbar wire type * Hande IO termination input * Fail early due to NX tools limitation for now * Validations and fixes for RAM I/Os * Fix for latest version of tools * Use ctx->idf where applicable * warn if RAM ports are not actually used * Fix IOM packing * Fix CY packing * Change how constants are handled on CY * Post placement optimization for CY * Address comments for PR * pack and export GCK, WFG and PLL * Cover more global routing cases * Constraing to location if provided * Place at LOC * Pack and export DSP * wip * wip * notes * wip * wip * Validate DSPs * DSP cascading * Check mandatory parameters for DSP * existing gck * wip * export all the rest for bitstream * CDC packing * add more sinks * place FIFO * map rest of FIFO ports * enable pll by default * cleanup * Initial XLUT support * Fix statistics * Properly duplicate GCKs * RRSTO and WRSTO are not used on XFIFO * Fix for latest version of JSON format * Implement GCK limitations * cleanup * cleanup * Add more signals and use lowskew name * cleanup code a bit * Fix wfb * detect cascaded GCKs * Handle DFR * Route dfr clock properly * Cleanup * Cleanup bitstream code * Review issues addressed * Move helper routines * Expose private members for unit tests * cleanup * remove scale factor * make all location helper arrays static * Addressed review comments * Support post-routing CSC and SCC * Support NX_BFF * Place CSS and SCC only on allowed locations * Support latest Impulse * ng_ultra: Expand bounding box further for left-edge IO Signed-off-by: gatecat <[email protected]> * Export all IO parameters in bitstream * Handle new CSV order or parameters and additional validation * Add some more undocumented values for CSV * Support for old and new CSV formats * Initial DDFR support * Display warning message once per file * Address review issues * Fix crash on memory access * Make boundbox fit NG-Ultra internal design * Update attributes after dff rewrite * Implement basic NG-Ultra LUT-DFF unit tests * Always use first seen xbar input Signed-off-by: gatecat <[email protected]> * Simplified crossbar pip detection * Change order to prevent issues with some unconnected constants * Pack LUT and multiple DFF in stripe * Place DFF chains * Improve large DFF chains * Rename to pack_dff_chains * Better use XLUTs when possible * pack output DFF together with XLUT * option to disable XLUT optimiziations * Make more optimizations optional * fix to use pre-increment * GCK for lowskew signals * Bugfix for nets that are not part of lowskew network * Fix bitstream export for PLL cell * Remove separate route lowskew * Allow WFG mode 2 * Merge inverter into GCK * Add CSC per TILE when needed * Improve reusage of existing cell for CSC * Take preferred CSC * Cleanup * When in place CSC size not important * Cleanup * Reset and Load restriction * make csc optimisation optional * Proper count for IO resources * Detect when there is no next cell for DSP chain * Do not incorporate loops in XLUT * Check if output exists * Update copyright for delivery * Make building NG-Ultra chip database optional, follow filename convention * Ported drawing code to new API * Update expandBoundingBox for NG-Ultra * Copyright and license update * Add README information * cleanup and constids * Using ctx->idf where applicable * remove if_using_basecluster * refactor extra data usage * refactor to use create_cell_ptr only * optimized getCSC * optimize critical path a bit * clangformat * disable clangformat where applicable --------- Signed-off-by: gatecat <[email protected]> Co-authored-by: Lofty <[email protected]> Co-authored-by: gatecat <[email protected]>
YosysHQ · Dec 4, 2024 · 5a80711 · 5a80711
1 parent 5eaa1b3
commit 5a80711
Show file tree

Hide file tree

Showing 18 changed files with 13,038 additions and 1 deletion.
diff --git a/CMakeLists.txt b/CMakeLists.txt
@@ -334,6 +334,7 @@ foreach (family ${ARCH})
 
     if (BUILD_TESTS)
         set(family_targets ${family_targets} ${PROGRAM_PREFIX}nextpnr-${family}-test)
+        set(family_test_targets ${PROGRAM_PREFIX}nextpnr-${family}-test)
     endif()
 
     # Include the family-specific CMakeFile

diff --git a/README.md b/README.md
@@ -9,6 +9,7 @@ Currently nextpnr supports:
  * Lattice ECP5 devices supported by [Project Trellis](https://github.com/YosysHQ/prjtrellis)
  * Lattice Nexus devices supported by [Project Oxide](https://github.com/gatecat/prjoxide)
  * Gowin LittleBee devices supported by [Project Apicula](https://github.com/YosysHQ/apicula)
+ * NanoXplore NG-Ultra devices supported by [Project Beyond](https://github.com/yosyshq-GmbH/prjbeyond-db)
  * *(experimental)* Cyclone V devices supported by [Mistral](https://github.com/Ravenslofty/mistral)
  * *(experimental)* Lattice MachXO2 devices supported by [Project Trellis](https://github.com/YosysHQ/prjtrellis)
  * *(experimental)* a "generic" back-end for user-defined architectures
@@ -146,6 +147,18 @@ sudo make install
 
  - Examples of the Gowin flow for a range of boards can be found in the [Project Apicula Examples](https://github.com/YosysHQ/apicula/tree/master/examples).
 
+#### ng-ultra
+
+For NanoXplore NG-Ultra support, clone [Project Beyond DB](https://github.com/yosyshq-GmbH/prjbeyond-db) repo
+
+```
+cmake . -DARCH="himbaechel" -DHIMBAECHEL_PRJBEYOND_DB=/path/to/prjbeyond-db -DHIMBAECHEL_NGULTRA_DEVICES=ng-ultra
+make -j$(nproc)
+sudo make install
+```
+
+*Please note that binary bitstream creation requires Impulse tool from NanoXplore.*
+
 ### GUI
 
 The nextpnr GUI is not built by default, to reduce the number of dependencies for a standard headless build. To enable it, add `-DBUILD_GUI=ON` to the CMake command line and ensure that Qt5 and OpenGL are available:

diff --git a/himbaechel/family.cmake b/himbaechel/family.cmake
@@ -1,8 +1,14 @@
-set(HIMBAECHEL_UARCHES "example;gowin;xilinx")
+set(HIMBAECHEL_UARCHES "example;gowin;xilinx;ng-ultra")
 foreach(uarch ${HIMBAECHEL_UARCHES})
 	add_subdirectory(${family}/uarch/${uarch})
     aux_source_directory(${family}/uarch/${uarch} HM_UARCH_FILES)
     foreach(target ${family_targets})
         target_sources(${target} PRIVATE ${HM_UARCH_FILES})
     endforeach()
+    if (BUILD_TESTS)
+        foreach(target ${family_test_targets})
+            aux_source_directory(${family}/uarch/${uarch}/tests/ HM_UARCH_TEST_FILES)
+            target_sources(${target} PRIVATE ${HM_UARCH_TEST_FILES})
+        endforeach()
+    endif()
 endforeach(uarch)
diff --git a/himbaechel/uarch/ng-ultra/CMakeLists.txt b/himbaechel/uarch/ng-ultra/CMakeLists.txt
@@ -0,0 +1,38 @@
+message(STATUS "Configuring Himbaechel-NG-ULTRA uarch")
+cmake_minimum_required(VERSION 3.5)
+project(himbaechel-ng-ultra-chipdb NONE)
+
+set(ALL_HIMBAECHEL_NGULTRA_DEVICES ng-ultra)
+set(HIMBAECHEL_NGULTRA_DEVICES "" CACHE STRING
+    "Include support for these NG-Ultra devices (available: ${ALL_HIMBAECHEL_NGULTRA_DEVICES})")
+message(STATUS "Enabled Himbaechel-NG-Ultra devices: ${HIMBAECHEL_NGULTRA_DEVICES}")
+set(HIMBAECHEL_PRJBEYOND_DB "" CACHE STRING
+    "Path to a Project Beyond database")
+
+set(chipdb_binaries)
+file(MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/share/himbaechel/ng-ultra)
+foreach(device ${HIMBAECHEL_NGULTRA_DEVICES})
+	if("${HIMBAECHEL_PRJBEYOND_DB}" STREQUAL "")
+		message(SEND_ERROR "HIMBAECHEL_PRJBEYOND_DB must be set to a prjbeyond database checkout")
+	endif()
+
+	set(device_bba ${CMAKE_BINARY_DIR}/share/himbaechel/ng-ultra/chipdb-${device}.bba)
+	set(device_bin ${CMAKE_BINARY_DIR}/share/himbaechel/ng-ultra/chipdb-${device}.bin)
+	string(TOUPPER ${device} upcase_device)
+	add_custom_command(
+		OUTPUT ${device_bin}
+		COMMAND ${Python3_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/gen/arch_gen.py --db ${HIMBAECHEL_PRJBEYOND_DB} --device ${upcase_device} --bba ${device_bba}
+		COMMAND bbasm ${BBASM_ENDIAN_FLAG} ${device_bba} ${device_bin}.new
+        # atomically update
+        COMMAND ${CMAKE_COMMAND} -E rename ${device_bin}.new ${device_bin}
+		DEPENDS
+			bbasm
+			${CMAKE_CURRENT_SOURCE_DIR}/gen/arch_gen.py
+			${CMAKE_CURRENT_SOURCE_DIR}/constids.inc
+		VERBATIM)
+	list(APPEND chipdb_binaries ${device_bin})
+endforeach()
+
+add_custom_target(chipdb-himbaechel-ng-ultra ALL DEPENDS ${chipdb_binaries})
+install(DIRECTORY ${CMAKE_BINARY_DIR}/share/himbaechel/ng-ultra/ DESTINATION share/nextpnr/himbaechel/ng-ultra
+	    PATTERN "*.bba" EXCLUDE)