zynqmp-generic.conf: add boot.bin for wks #43
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
To populate the QEMU binaries into sysroot the populate_sysroot task isn't enough for qemu-xilinx-helper-native, we need to use addto_recipe_sysroot task. This patch will correct the mapping. u-boot-zynq-uenv failing to add DEPENDS when EXTRA_IMAGEDEPENDS has recipe:task. This patch will split the recipe name and add it to DEPENDS. Signed-off-by: Raju Kumar Pothuraju <[email protected]> While unusual, the PR is updated, as the qemu and qemu helper need to have the same version/pr or the path logic doesn't work properly. Signed-off-by: Mark Hatle <[email protected]>
Board specific u-boot defconfigs are deprecated from u-boot source, hence remove deprecated defconfigs from u-boot recipes. Signed-off-by: Sandeep Gundlupet Raju <[email protected]> Signed-off-by: Mark Hatle <[email protected]>
qemu-sd: Qemu 6.X onwards SD image should be of power of 2, this patch will read the generate qemu-sd image and find out its next power of 2 and adjust the size using qemu-img resize command. qemu-sd-fatimg: Due to circular dependencies in yocto when we enable INITRAMFS_IMAGE + wic and we need SD fat image to boot versal on qemu. For this added new image conversion type qemu-sd-fatimg, it will generate the sd fatimg containing boot.bin,boot.scr,rootfs.cpio.gz.u-boot files. Usage: IMAGE_FSTYPES += "cpio.gz.u-boot.qemu-sd-fatimg" NOTE: qemu-sd-fatimg creation is a workaround fix for circular dependencies. Signed-off-by: Raju Kumar Pothuraju <[email protected]> Signed-off-by: Mark Hatle <[email protected]>
For zynq,microblaze qemu supports direct kernel boot by specifying kernel image name to QB_DEFAULT_KERNEL. Adjusting the kernel image based on the bundle image selection. Signed-off-by: Raju Kumar Pothuraju <[email protected]> Signed-off-by: Mark Hatle <[email protected]>
This patch will add generic fuctions to add qemu args as per the
configuration set and soc_family.
Ex: - Adding Image, rootfs and boot.scr files for zynqmp if in case of
IMAGE_INITRAMFS set.
- Add boot mode as 5 for versal
- Return the rootfs type per configuration
- Skip adding rootfs in case of bundle image as kernel image will
have it.
Signed-off-by: Raju Kumar Pothuraju <[email protected]>
Signed-off-by: Mark Hatle <[email protected]>
This patch will add runqemu support for microblaze-generic machines for INITRD/INITRAMFS types. Signed-off-by: Raju Kumar Pothuraju <[email protected]> Signed-off-by: Mark Hatle <[email protected]>
This patch will add runqemu support for versal-generic when INITRAMFS/INITRD/EXT4 configurations. Signed-off-by: Raju Kumar Pothuraju <[email protected]> Signed-off-by: Mark Hatle <[email protected]>
This patch will add runqemu support for zynq-generic machines when INITRAMFS/INITRD/EXT4 sets. Signed-off-by: Raju Kumar Pothuraju <[email protected]> Signed-off-by: Mark Hatle <[email protected]>
This patch will add runqemu support for zynqmp-generic machines when INITRAMFS/INITRD/EXT4 sets. Signed-off-by: Raju Kumar Pothuraju <[email protected]> Signed-off-by: Mark Hatle <[email protected]>
Using append enabling the FSTYPE when using the soc override in petalinux. Using += to add/reflect the value only in yocto or defined with ?= or = operators. Signed-off-by: Raju Kumar Pothuraju <[email protected]> Signed-off-by: Mark Hatle <[email protected]>
UBOOT_IMAGE_BLOB may need a machine (override) specific default value, but we always want the user to be above to override this easily. Adding the new UBOOT_IMAGE_BLOB_DEFAULT allows us to set the default in a BSP layer, while continuing to make the UBOOT_IMAGE_BLOB setting easy for the user to adjust. Signed-off-by: Mark Hatle <[email protected]>
This value is passed to the kernel in order to choose the correct disk but defaults to /dev/vda which does not boot. Signed-off-by: John Toomey <[email protected]> Signed-off-by: Mark Hatle <[email protected]>
Replace existing integration with new work that enables target gdb and gdbserver. Signed-off-by: Mark Hatle <[email protected]>
Signed-off-by: Mark Hatle <[email protected]>
Add support for U-boot user specified dts by setting below variables in local.conf file. UBOOT_USER_SPECIFIED_DTS:pn-u-boot-xlnx = "versal-vck190-revA-x-ebm-01-revA" This will fetch user specified dts from from u-boot repo path u-boot-xlnx/arch/arm/dts/versal-vck190-revA-x-ebm-01-revA.dts when user doesn't want to use EXT_DTB from device-tree recipes. Signed-off-by: Sandeep Gundlupet Raju <[email protected]> Adjust to keep extra_oemake args blank, unless actually needed Signed-off-by: Mark Hatle <[email protected]>
Simplify the function to treat microblaze as a soc_family. If we do not have initramfs_image defined, then verify wic.qemu-sd is available before returning that value, otherwise fall back to the dictionary. Signed-off-by: Mark Hatle <[email protected]>
Signed-off-by: Mark Hatle <[email protected]>
Add the device-tree as a dependency and kc705-microblazeel is defined as the default HDF_MACHINE. Also simplify by removing the QB_DTB and using the default value. Signed-off-by: Mark Hatle <[email protected]>
1. Add new metal-xilinx-vendor layer which supports vendor specific
machine configuration files, device-tree, kernel, platform-init etc.
2. Moved below vendor machine conf files, dt and related configs from
meta-xilinx-bsp and meta-xilinx-contrib to meta-xilinx-vendor layer.
- microzed-zynq7.conf
- minized-zynq7.conf
- picozed-zynq7.conf
- zedboard-zynq7.conf
- zybo-zynq7.conf
- zybo-linux-bd-zynq7.conf
- ultra96-zynqmp.conf
3. Obsolete qemu-zynq7, s3adsp1800-qemu-microblazeeb, v350-versal and
vc-p-a2197-00-versal from meta-xilinx-bsp layer. Users should use
zynq-generic.conf for zynq7000 qemu boot should be functionally
equivalent to qemu-zynq7.
4. Add new MAINTAINERS.md file and move maintainers, Mailing list and
Patches content from meta-xilinx-* README.md to MAINTAINERS.md file.
5. Updated README.md file for supported board machines files in
meta-xilinx-bsp, meta-xilinx-contrib and meta-xilinx-vendor layers.
6. Disabled old drm kernel patches for zybo-linux-bd-zynq mahcine in
meta-xilinx-contrib layer as these patches doesn't apply on 5.x
kernel, if we don't hear from patch submitter we will remove these
patches from meta-xilinx-contrib layer.
7. Removed drm kernel cache metadate for zybo-linux-bd-zynq7 machine
as these configs are already available in xilinx_zynq_defconfig.
8. Fixed build issue for u-boot by changing
PREFERRED_PROVIDER_virtual/bootloader from u-boot to u-boot-xlnx.
9. Add meta-xilinx-vendor to bblayers.conf.sample
Signed-off-by: Sandeep Gundlupet Raju <[email protected]>
Signed-off-by: Mark Hatle <[email protected]>
Move README.booting.md file from meta-xilinx-bsp layer to meta-xilinx. Signed-off-by: Sandeep Gundlupet Raju <[email protected]> Signed-off-by: Mark Hatle <[email protected]>
Update README stating that Ultra96 machine configuration file is compatible with v1 board and refer to meta-avnet for v2 board. Signed-off-by: Sandeep Gundlupet Raju <[email protected]> Signed-off-by: Mark Hatle <[email protected]>
Add meta-xilinx-tools as dynamic-layers. Signed-off-by: Sandeep Gundlupet Raju <[email protected]> Signed-off-by: Mark Hatle <[email protected]>
…urrent fork. +PACKAGECONFIG[alsa] = "--audio-drv-list=alsa,,alsa-lib" | ERROR: Unknown driver 'default' selected | Possible drivers are: oss alsa sdl pa +PACKAGECONFIG[pulsedio] = "--audio-drv-list=pa,,pulseaudio" | ERROR: unknown option --disable-pa +#PACKAGECONFIG[selinux] = "" | ERROR: unknown option --disable-selinux Signed-off-by: Jeremy A. Puhlman <[email protected]> Signed-off-by: Mark Hatle <[email protected]>
| ERROR: Cannot find Ninja Signed-off-by: Jeremy A. Puhlman <[email protected]> Signed-off-by: Mark Hatle <[email protected]>
Resolve the following warning WARNING: .../meta-xilinx/meta-xilinx-core/recipes-xrt/xrt/xrt_git.bb: EXTRA_OECMAKE:append:versal-ai-core += is not a recommended operator combination, please replace it. Signed-off-by: Mark Hatle <[email protected]>
Signed-off-by: Mark Hatle <[email protected]>
Signed-off-by: Mark Hatle <[email protected]>
Signed-off-by: Mark Hatle <[email protected]>
runqemu now appears to set -serial mon:stdio by default. This can conflict with the built in parameters. Reported by: Jeremy Puhlman <[email protected]> It may look unusual, but the remaining -serial null are still required for booting. Signed-off-by: Mark Hatle <[email protected]>
Signed-off-by: Mark Hatle <[email protected]>
Signed-off-by: Mark Hatle <[email protected]>
Signed-off-by: Mark Hatle <[email protected]>
GPLv2 and BSD are no longer valid. Choose an appropriate replacement. Signed-off-by: Mark Hatle <[email protected]>
--help may need to be passed in and should be directed to the main APU handler. runqemu may use --help for various reasons. Signed-off-by: Mark Hatle <[email protected]>
wks needs all files that need to appear in boot partition to be added to the IMAGE_BOOT_FILES variable. This is missing from the zynqmp family hence add it here.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
wks needs all files that need to appear in boot partition to be added to
the IMAGE_BOOT_FILES variable. This is missing from the zynqmp family
hence add it here.