Skip to content

XeroAPI/Xero-Postman-Tutorial-PKCE-Edition

Repository files navigation

Xero-Postman OAuth 2.0 via PKCE

A Postman collection for authenticating to the Xero API.

Steps to get up and running

Follow these steps to quickly get up and running with the Xero API and Postman with the PKCE Grant Type:

1. Import the Xero OAuth 2.0 collection and Xero environment into Postman

Click the button below and select the Desktop version of Postman (Chrome extension doesn't support environment variables). This will also install the Collection and Environment we'll be using.

Run in Postman

2. Create an OAuth2 app at https://developer.xero.com/myapps

Go to the Xero developer portal and create an OAuth2 app.

If you haven't already signed up for a xero account you can do so here.

Use the following values:

  1. App Name - your choice, but can't contain the word 'Xero'
  2. Click ”Auth Code with PKCE”
  3. Company or application URL - this needs to be an https address, but isn't used with postman
  4. OAuth 2.0 redirect URI - also needs to be https or localhost address
  5. Click Create App

create an oauth2 app

You'll then be taken to your App's Details page. Keep this page open, and start up Postman.

your newly created app details

3. Add your Variables to the GET Authorisation Call

Copy the following details into the Params tab of the GET Authorisation Call:

  1. Response_type - code
  2. code_challenge_method - S256
  3. Client ID - The Client ID you’ve just generated from the My Apps Page
  4. Scopes - the scopes you’ll use to access the areas of Xero you require. More information on Scopes can be found here (https://developer.xero.com/documentation/oauth2/scopes) For this tutorial, we’d suggest using the following:

openid profile email offline_access accounting.transactions

  1. OAuth 2.0 Redirect URI - The URI you’ve entered into the My Apps Page, this has to match exactly
  2. State - any value you wish. Including the State with this call is optional however we suggest using it for this tutorial. If you’re not including State, untick the checkbox next to the State (you’ll also have to untick it on any calls you make)
  3. code_challenge - see the step below

GET Authorisation Call with some Details

4. Generate a Code Challenge

The main difference between an Authorisation Grant Type and the PKCE Grant, is that the PKCE Grant does not have Client Secret. It instead uses a Code Verifier and Code Challenge. As you can’t currently generate these codes easily in Postman at the moment, you can use the following online tool to generate them for you: https://tonyxu-io.github.io/pkce-generator/

  1. Enter a code verifier into the First Box
  2. This is a random string of ASCII characters between 43 and 128 characters long that can only consist of the characters A-Z, a-z, 0-9, and the punctuation -._~ (hyphen, period, underscore, and tilde).
  3. Click “Generate Code Challenge”
  4. Copy out the Code Challenge and post it into the Params tab of the GET Authorisation Call from the previous step
  5. Keep a hold of the Code Verifier, as you will need this with other calls later

PKCE Generator Settings

5. Add your Variables to the Environment

Just like the Params Tab of GET Authorisation Call, we now need to add the Following Details to your Environment:

  1. client_id - The Client ID you’ve just generated from the My Apps Page
  2. refesh_token - ignore this field for now, we’ll add this later
  3. access_token - ignore this field for now, we’ll add this later
  4. xero-tenant-id - ignore this field for now, we’ll add this later
  5. Redirect URI - The URI you’ve entered into the My Apps Page, like before this has to match exactly
  6. code-verifier - the same Code Verifier used in the last step
  7. code-challenge - the same Code Challenge used in the last step
  8. token_endpoint - https://identity.xero.com/connect/token
  9. authorization_endpoint - https://login.xero.com/identity/connect/authorize
  10. code_challenge_method - S256
  11. state - the same state as you used in step 3 (if you’ve deselected it in your Authorisation Params, you must deselect it here also)

Add your Variables to the Enviroment

6. Authorise your PKCE App with a Xero Organisation

Now that you have added all the variables to both the Environment and Params Tab, double click and copy the URL that Postman has generated for you out of the URL Call field and paste it into your browser.

Copy the URL out of Postman and into your Browser

You’ll then be directed to the Xero Login Screen. If you hit an Error 500 at this stage, towards the bottom of the error page, an error message will display, showing what is causing the error. Login with a User account with either an active Demo Company, or Xero Organisation (this Organisation can be a Trial).

Good Bad
Good Bad

Once logged in you’ll be able to select an Organisation and shown what your app will access within this selected Organisation. If you are happy with this, click Allow Access.

Organisation Select Screen

7. Receive and Set your Access and Refresh Tokens

Once you have clicked Allow Access, you’ll be redirected back to the website you’re using as your Redirect URI. In the URL of this website, you’ll be given a code. Copy this Code out of your Browser, from the first character after “code=”, upto the &. Then paste this into the Code field in the Body Tab of the POST Token Call. Add this code to the Code Field. If this is the first time you've done this you'll be replacing this text:

Returned in the authorization step

Copy this code And Paste it here

Once you have added the Code to the POST Token Call, click the Send Button to receive your Access and Refresh Token. You’ll also be given an ID Token if you’ve included the OpenID scopes (openid, profile and email) however we will not be using this Token in this Tutorial.

You've Received your Tokens!

Once you’ve received your tokens, Set your Access Token to your Environment:

  1. Highlight the Access Token (not including the Quotation Marks)
  2. Right Click
  3. Set: PKCE (if you have anything other than Set: PKCE, change your environment in the top right corner to the PKCE Environment)
  4. Click access_token

Set your Access Token

Once this has been done, do the same for the Refresh Token

  1. Highlight the Refresh Token (not including the Quotation Marks)
  2. Right Click
  3. Set: PKCE
  4. Click refresh_token

Set your Refresh Token

8. Receive and Set your Tenant ID

Select the Connections Call from your Collections on the Left and Send the Call. You’ll then be returned the Connection ID (named ID), Tenant ID, Tenant Type, Created and Updated Dates of your Tenants. If you've connected Multiple Organisations, you'll receive multiple Tenant IDs.

These are your Tenants

Like we did for the Access and Refresh Tokens, we now need to set the Tenant ID.

  1. Highlight the Tenant ID (not including the Quotation Marks)
  2. Right Click
  3. Set: PKCE
  4. Click xero-tenant-id

Set the Tenant

Once this has been done you can start making calls! We'd suggest trying out the Invoice Get Call included with the Collection. If you'd like to try out other endpoints, remember you may need to also add a new Scope to access it. If you do this, add the new Scope at step 3 and start the process again from there.

Happy API'ing!

About

No description, website, or topics provided.

Resources

Code of conduct

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published