3.3.0 Climate humidity

Devices

• Climate: Added humidity support

3.2.0 Climate Fan speed

Devices

• Climate: Added fan speed support

3.1.1 Fix Eberle status

Bugfixes

• Fix DPTHVACStatus inverted bit order

3.1.0 DPT 1

DPT

• Add DPT 1 definitions (as of KNX Specification 03_07_02 version 02.02.01)

Devices

• ClimateMode: Restore Climate.suppports_operation_mode and Climate.supports_controller_mode to be True when read-only (like pre 3.0.0)
• ClimateMode: Filter custom controller / operation modes for available settable modes
• ClimateMode: For binary operation modes, only list configured modes and Standby in operation_modes

Bugfixes

• Fix log message for DPT decoding errors in GroupAddressDPT parsing

3.0.0 Eager telegram decoding, DPTComplex and DPTEnum

Breaking changes

• Drop support for Python 3.9
• Change callback signatures from awaitable to callable in XKNX.device_updated_cb, TelegramQueue, Device, Devices, ConnectionManager and RemoteValue.
• Remove async from functions / methods (nothing has to be awaited there)
  • Tools: group_value_write, group_value_response and group_value_read
  • ConnectionManager: .connection_state_changed
  • Device: .process, .process_group_write, .process_group_read, .process_group_response
  • Devices: .process
  • RemoteValue: .set, .respond, .process and .update_value
  • ValueReader: .send_group_read
• Rename DPT transcoder modules for schema xknx.dpt.dpt_<main-number>.py

Bugfixes

• Fix value scaling for sensor types: time_period_100msec, time_period_10msec, delta_time_10ms, delta_time_100ms, percentV16

Features

• Added eager telegram data decoding for GroupValueWrite / GroupValueResponse Telegrams. DPTs for group addresses can be set using xknx.group_address_dpt.set(). Telegram has a new attribute decoded_data which is set when a decoder was found.

Devices

• A Device doesn't auto-add to xknx.devices anymore. It can be done via xknx.devices.async_add() now. xknx.devices.async_remove stops a device from processing telegrams, removes from StateUpdater and cancels its internal tasks. Removed devices can be added again.
• Device.shutdown method is removed
• Refactor ClimateMode device
• Rename ClimateMode argument group_address_operation_mode_night to group_address_operation_mode_economy
• Remove DPT 3 special handling stepwise_* and startstop_* from Sensor device
• Remove DateTime device in favour of DateDevice, TimeDevice and DateTimeDevice using datetime objects instead of time.struct_time

DPT

• DPTComplex: Common interface for DPT transcoders with multi-value data. Resulting dataclasses can be converted to and from a dict with DPT specific properties to be JSON compatible.
• Added or refactored complex DPTs and dataclasses:
  • 3.007 - DPTControlDimming
  • 3.008 - DPTControlBlinds
  • 10.001 - DPTTime - KNXTime
  • 11.001 - DPTDate - KNXDate
  • 18.001 - DPTSceneControl
  • 19.001 - DPTDateTime - KNXDateTime
  • 232.600 - DPTColorRGB - RGBColor
  • 235.001 - DPTTariffActiveEnergy - TariffActiveEnergy
  • 242.600 - DPTColorXYY - XYYColor
  • 251.600 - DPTColorRGBW - RGBWColor
  • 20.60102 - DPTHVACStatus - HVACStatus (removed DPTControllerStatus in favour of this)
• DPTEnum: Common interface for DPT trath enumueration values. Transcoders accept Enum, string or raw integer values for encoding.
  • 1.007 - DPTStep
  • 1.008 - DPTUpDown
  • 1.100 - DPTHeatCool
  • 20.102 - DPTHVACMode - HVACOperationMode
    • rename "NIGHT" to "ECONOMY" and "FROST_PROTECTION" to "BUILDING_PROTECTION" according to KNX specifications
  • 20.105 - DPTHVACContrMode - HVACControllerMode
    • rename "DRY" to "DEHUMIDIFICATION" and add some values according to KNX specifications
• Change DPT number of Enthalpy from 9.999 to 9.60000 (manufacturer specific range)
• Support dict values with "main" and "sub" keys for DPTBase.parse_transcoder()
• Verify DPTBinary max payload bitsize when decoding by transcoders payload_length

Address

• InternalGroupAddress attribute address is renamed to raw to be in line with GroupAddress (although still str). Its value has an "i-" prefix.

Internal

• Use slots in addresses, Telegram, DPTBinary, DPTArray, TPCI, APCI, DPTComplexData
• Convert Telegram and APCI to dataclasses. Telegram is not hashable anymore.
• RemoteValue instances use pre-decoded data from Telegrams if available and dpt_class for is set - otherwise they decode the data themselves in from_knx like before.
• Remove RemoteValueControl and unused RemoteValue1Count class
• Add value argument to RemoteValue after_update_cb callback

2.12.2 Fix thread leak

Bugfixes

• Fix thread leak when initial connection attempt fails (on threaded connection mode).

2.12.1 Address error messages

Internal

• More detailed address parsing error messages.

2.12.0 Broadcasts

Bugfixes

• None is not a valid address parameter for GroupAddress and IndividualAddress anymore. It raises CouldNotParseAddress.
• None in a RemoteValue or Device group address list is now ignored instead of parsed as broadcast address.
• Broadcast address ("0/0/0") is now invalid for RemoteValue and Device group addresses and raises CouldNotParseAddress.

Management

• Add handling mechanism and sending method for broadcast telegrams in the management class.
• Add new management procedures for device management: nm_invididual_address_write, nm_individual_address_read, nm_individual_address_serial_number_read and nm_individual_address_serial_number_write.

Secure

• Parse project_name from an ETS Keyring.

Internal

• Use ruff format and more ruff linters. Remove black, isort, flake8 and pyupgrade from requirements.

New Contributors

• @oldcorvus made their first contribution in #1365
• @RealByron made their first contribution in #1362
• @opieters made their first contribution in #1375

DPT 9 small negative fix

Bugfixes

• Fix DPT 9 handling of values < 0 and >= -0.005. These are now rounded to 0 instead of being sent as -20.48.

DateTime fix

Bugfixes

• Fix processing custom time data in DateTime devices.