Send a universe of DMX using sACN over websockets, created for use in virtual lighting rigs.
- Python 3.8.x or newer (tested up to 3.11.2)
- A Websocket Relay Server
- Any lighting software that supports sACN
By default, a websocket server will be run locally at ws://localhost:80/ but you can use any server that accepts websockets and can then distribute it to connected clients.
I recommend setting up your own websocket relay server for this if you want to send to more than a single 'client' connection.
Download the Latest Release.
Install the requirements with
pip install -r requirements.txtEdit config.toml with your Websocket host and network settings
ws_uri = "ws://localhost"
Websocket relay host, by default, this will attempt to connect to a locally hosted websocket server.
locally_host = true
Hosts a websocket relay server on localhost when set to 'true', will need to be changed to 'false' if you want to use a different/external relay server.
local_port = 80
Websocket port when hosting locally. Ignored when locally host is set to false.
sACN_port = 5568
Port for sACN, shouldn't need to be changed
sACN_ip = "127.0.0.1"
IP address to listen for sACN on, in this case it is the local device. Depending on the lighting software you use, you may need to enable sending sACN to Applications on the same device. In MagicQ, this is in Setup>Network.
In newer versions of MagicQ, this setting has been changed to Net host options
sACN_universe = 1
sACN universe to listen to, most small setups won't need to be change this. If you need to send multiple universes, multiple copies of the application can be used but you will need to have separate config files made.
dmx_fps = 10
DMX Sending rate can be anything between 1 and 48, this defines the maximum rate but if there isn't new DMX data to send, less packets will be sent to match.
Run sACN_Websockets.py
The default configuration will host a websocket server available at ws://localhost:80/ and listen for sACN Universe 1 on 127.0.0.1:5568
