save/load infoSettings Struct instead of save/load every variable ind…

…ividually, Fix Screen freezes/Click to Resume message/damaged M105 command in Marlin mode (bigtreetech#1468)

TFT/src/User/API/BabystepControl.c

@@ -31,11 +31,11 @@ float babystepResetValue(void)
   if (babystep_value < 0.0f)
     neg = -1;
 
-  step_count = (babystep_value * neg) / BABYSTEP_MAX_UNIT;
+  step_count = (babystep_value * neg) / BABYSTEP_MAX_STEP;
   for (; step_count > 0; step_count--)
   {
-    mustStoreCmd("M290 Z%.2f\n", -(BABYSTEP_MAX_UNIT * neg));
-    processed_baby_step += BABYSTEP_MAX_UNIT;
+    mustStoreCmd("M290 Z%.2f\n", -(BABYSTEP_MAX_STEP * neg));
+    processed_baby_step += BABYSTEP_MAX_STEP;
   }
 
   last_unit = (babystep_value * neg) - processed_baby_step;

TFT/src/User/API/Settings.c

@@ -62,7 +62,7 @@ void infoSettingsReset(void)
   infoSettings.m27_refresh_time       = M27_REFRESH;
   infoSettings.m27_active             = M27_WATCH_OTHER_SOURCES;
   infoSettings.longFileName           = AUTO;  //ENABLED / DISABLED / AUTO
-  infoSettings.fan_percentage         = ENABLED;
+  infoSettings.fan_percentage         = SHOW_FAN_PERCENTAGE;
 
   infoSettings.pause_retract_len      = NOZZLE_PAUSE_RETRACT_LENGTH;
   infoSettings.resume_purge_len       = NOZZLE_RESUME_PURGE_LENGTH;

TFT/src/User/API/Settings.h

@@ -28,8 +28,8 @@ typedef enum
 
 // Config version support
 // change if new elements/keywords are added/removed/changed in the configuration.h Format YYYYMMDD
-// this number should match the CONFIG_VERSION in configuration.h
-#define CONFIG_SUPPPORT 20201218
+// this number should match CONFIG_VERSION in configuration.h
+#define CONFIG_SUPPPORT 20210105
 
 #define FONT_FLASH_SIGN       20200908 //(YYYYMMDD) change if fonts require updating
 #define CONFIG_FLASH_SIGN     20201221 //(YYYYMMDD) change if any keyword(s) in config.ini is added or removed
@@ -63,6 +63,8 @@ typedef enum
 #define DISABLED  0
 #define ENABLED   1
 #define AUTO      2
+#define HIGH      1
+#define LOW       0
 
 typedef enum
 {

TFT/src/User/API/Temperature.c

@@ -9,7 +9,7 @@ const char *const heatWaitCmd[MAX_HEATER_COUNT]   = HEAT_WAIT_CMD;
 
 static HEATER  heater = {{}, NOZZLE0};
 static int16_t lastTarget[MAX_HEATER_COUNT] = {0};
-static uint8_t heat_update_seconds = 0;
+static uint8_t heat_update_seconds = TEMPERATURE_QUERY_SLOW_SECONDS;
 static bool    heat_update_waiting = false;
 static bool    heat_send_waiting[MAX_HEATER_COUNT];
 

TFT/src/User/API/flashStore.h

@@ -9,7 +9,7 @@ extern "C" {
 #include "variants.h"
 #include "Settings.h"
 
-#define PARA_SIZE 768  //bytes
+#define PARA_SIZE 256 // Max size of settings buffer to read/write
 
 void readStoredPara(void);
 void storePara(void);

TFT/src/User/API/parseACK.c

@@ -287,26 +287,25 @@ void parseACK(void)
     syncL2CacheFromL1(SERIAL_PORT);
     infoHost.rx_ok[SERIAL_PORT] = false;
 
-    if (infoHost.connected == false) //not connected to Marlin
+    if (infoHost.connected == false) // Not connected to printer
     {
       // Parse error information even though not connected to printer
-      if (ack_seen(errormagic))
-      {
-        ackPopupInfo(errormagic);
-      }
+      if (ack_seen(errormagic)) ackPopupInfo(errormagic);
+
       //the first response should be such as "T:25/50\n"
-      if (!(ack_seen("@") && ack_seen("T:")) && !ack_seen("T0:"))  goto parse_end;
-      if (ack_seen(heaterID[BED])) infoSettings.bed_en = ENABLED;
-      if (ack_seen(heaterID[CHAMBER])) infoSettings.chamber_en = ENABLED;
+      if (!(ack_seen("@") && ack_seen("T:")) && !ack_seen("T0:")) goto parse_end;
+
+      // find hotend count and setup heaters
       uint8_t i;
       for (i = NOZZLE0; i < MAX_HOTEND_COUNT; i++)
       {
         if(!ack_seen(heaterID[i])) break;
       }
       infoSettings.hotend_count = i ? i : 1;
       if (infoSettings.ext_count < infoSettings.hotend_count) infoSettings.ext_count = infoSettings.hotend_count;
+      if (ack_seen(heaterID[BED])) infoSettings.bed_en = ENABLED;
+      if (ack_seen(heaterID[CHAMBER])) infoSettings.chamber_en = ENABLED;
       updateNextHeatCheckTime();
-      infoHost.connected = true;
 
       #ifdef RepRapFirmware
         if (!ack_seen("@"))  //It's RepRapFirmware
@@ -323,10 +322,11 @@ void parseACK(void)
       {
         storeCmd("M503\n");  // Query detailed printer capabilities
         storeCmd("M92\n");   // Steps/mm of extruder is an important parameter for Smart filament runout
-                             // Avoid can't getting this parameter due to disabled M503 in Marlin
+                              // Avoid can't getting this parameter due to disabled M503 in Marlin
         storeCmd("M115\n");
         storeCmd("M211\n");  // retrieve the software endstops state
       }
+      infoHost.connected = true;
     }
 
     // Onboard sd Gcode command response