Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Update to 0.34.1. From the changelog:
- Corrected typo in pen.c per suggestion by Belinda Liu. This fixes issue #38. - Merged pull request from Vincent Bernat for OpenSSL 1.1.0 compatibility. This fixes issue #28. - Allow setting local address for upstream connections. This fixes issue #31. - New penctl command "source" to set this option. - Fixed issue #30: UDP not working in combination with a configuration file. - In epoll.c: check for EPOLLHUP. - In dsr.c: always use our real mac address, to avoid confusing switches. - Cleaned up code residue surrounded by "#if 0". - Added CS_HALFDEAD for UDP streams that haven't seen traffic in a while. - Bug in pending_and_closing: don't modify the list we're looping over. - Updated pen manpage. - Deprecated -Q option (it didn't do anything since kqueue was already the default where it was available). - Fixed error handling in epoll support. - Added transparent UDP test case to testsuite.sh. - Contribution from Talik Eichinger: add X-Forwarded-Proto when doing SSL decryption. - Added tarpit test case to testsuite.sh. - Tarpit functionality to be used with the DSR mode. - pen.1: removed obsolete -S option, updated defaults for -x and -L. - In failover_server: sanity checks to failover routine. - In add_client: add the initial server to .client as well as .initial. - In failover_server: changed abuse_server to ABUSE_SERVER and emerg_server to EMERG_SERVER, to handle their default NO_SERVER values. See issue #19 on Github. - At the suggestion from Marcos Vinicius Rogowski, the hash algorith will now include the client port number if the -r (roundrobin) option is used. See UlricE/pen#18 - Fixed IP-based client tracking. - Removed unnecessary #include <pen.h> in dlist.c - Added UDP mode for Direct Server Return. - Updated configure.ac for compatibility with CentOS 6. - Added #ifdef around SSLv3 initialization code in ssl, as suggested by [email protected]. - Transparent reverse proxy support for Linux, FreeBSD and OpenBSD. - Allow the client table size to be updated on the fly. Default size still 2048. - Allow the connection table size to be updated in the fly. Default still 500. - See penctl.1, options clients_max and conn_max. - Introduced the macro NO_SERVER to be used instead of -1 to signify error conditions and such. - Removed the fixed server table size along with the -S option. - Fixed cosmetic bug in startup code which required port to be specified on backend servers even if it was the same as the listening port. - Numerous updates to support the madness that is Windows. - Fix from Vincent Bernat: segfault when not using SSL. - DSR support using Netmap on FreeBSD. - Unbroke DSR on Linux. - Replaced all calls to perror with debug(..., strerror(errno); - Updated penlog and penlogd to use diag.[ch]. - More refactoring: broke out conn.[ch], client.[ch], server.[ch], idler.[ch]. - Made a hash index such that the load balancer may balance load. - Broke out Windows code from pen.c into windows.c. Added windows.h. - Broke out public definitions for dsr into dsr.h. - Broke out memory management into memory.[ch]. - Broke out dignostic and logging functions into diag.[ch]. - Broke out settings into settings.[ch]. - Broke out access lists into acl.[ch]. - Broke out event initialization into event.[ch]. - Added pen_epoll.h, pen_kqueue.h, pen_poll.h, pen_select.h. - Broke out pen_aton et al into netconv.[ch]. - Added dsr.c - Bug in copy_down affecting SSL connections fixed. - Updated ocsp stapling to be compatible with server name indication. - Added pen-ocsp.sh script. - SSL code broken out into ssl.[ch]. SSL context creation broken out from ssl_init to ssl_create_context. - Server Name Indication support. New command to enable: ssl_sni_path PATH where PATH is the name of a directory containing domain.key, domain.crt and domain.ca files for each domain. - OCSP stapling. New command ssl_ocsp_response filename specifies the location of the ocsp response to be stapled. The response must be pre-fetched. The idea was borrowed from Rob Stradling. - New command ssl_client_renegotiation_interval specifies the minimum number of seconds the client must wait between renegotiation requests. Default 3600. - Enabled SSL session resumption. - In do_cmd: don't print "ignoring command" for comments starting with '#'. - Added ssl_option no_tlsv1.1 and ssl_option no_tlsv1.2 to disable SSL 1.1 and 1.2 respectively. - Added autoconf check that the ECDHE is available and not disabled. - Bumped default max connections and listen queue to 500. - Support for ECDHE cipher suites. - New commands ssl_option and ssl_ciphers to individually disable insecure protocols and ciphers. - Updated penctl.1 with the new command. - New knob to tweak max number of pending nonblocking connection attempts: pending_max N (default 100). - Moved dlist prototypes to dlist.h. - Added check to close idle connections after a period of inactivity. - Penctl: idle_timeout N (default 0 = never close idle connections). - Moved git repository to GitHub.. - New feature: dummy server. Rather than acting as a proxy, Pen will pretend to be a web server with just barely enough functionality to work as a test target. - Penctl: dummy|no dummy. - Yet Another command: abort_on_error|no abort_on_error makes Pen call abort() (or not) when encountering a fatal error. - New feature: "reliable idling". Pen will make and maintain a number of idle connections to the backend servers. When a connection closes, a new one is made (hence "reliable"). Penctl: idlers [N]. - In do_cmd: return diagnostics to penctl so the user can see them, instead of uselessly sending them to syslog. - New penctl commands: - socket N (print which connection the socket belongs to) - connection N (print info on the specified connection) - close N (forcibly close connection N) - In open_listener: check that the requested port is in range. - Fixed bug in dlist_insert. - Even load distribution when a server is unavailable. - Let pen save the settings for tcp_nodelay and tcp_fastclose. - Make flush_up and flush_down return the correct value on error. - Added config.h.win with reasonable settings for Windows. - Better detection and blacklisting of unavailable servers. - New penctl commands: - tcp_nodelay sets TCP_NODELAY on sockets. Turn off with no tcp_nodelay. - tcp_fastclose closes both upstream and downstream sockets if one of them - closes theirs. Will take the values up, down, both or off (default). - Rather than making a table of pending connections every time through the main loop, keep them in a doubly linked list which is only updated as needed. O(n) -> O(1). - A bug in udp mode: after successful "connect", do not event_add downfd, because it is equal to listenfd and epoll_ctl doesn't like that. - Module kqueue.c updated. - Module poll.c: set unused fd:s to -1, or Solaris will say ENOSYS. - Enable diagnostic messages by default in configure.ac. - Changed event bookkeeping from stateless to stateful. - Made keepalive optional and added "keepalive / no keepalive" penctl command. - Added windows.c and pen.h to the release tarball. - More sensible autoconfiguration defaults: poll, kqueue, epoll, openssl and geoip are built if found unless explicitly excluded. - New event management defaults: kqueue, epoll, poll, select in that order. - New penctl commands: kqueue, epoll, poll, select. - New command line option: -O cmd where cmd is any penctl command. E.g. -O select to use select instead of the compiled-in default. - New penctl option "listen [address:]port" to allow listening address to be changed on the fly or via a configuration file. - New pen options -i and -u to install and uninstall Pen as a Windows service. - See pen manpage. - Reduced default timeout to 3 seconds. - New autoconf option --enable-debugging to enable debugging code. - Lots of fixes for compatibility with Windows. - Fixed bug in mainloop which kept trying to write 0 bytes. - MinGW port. Use Makefile.win to compile. - Event management code broken out into select.c, poll.c, kqueue.c and epoll.c. - New command-line option -m to accept multiple incoming connections in a batch. - New command-line option -q to set incoming pending connection queue length. - Close upfd when failing over. - Adjusted debug logging levels. - Started on epoll support for Linux. - Rewrote output_net and output_file to take a variable number of arguments. - Handle timed out connection attempts in mainloop_kqueue. - Fixed mainloop_kqueue. - A lot of code broken out from mainloop_select into separate functions. - Fixed mainloop_poll. - Bugfixes related to the new backend connection logic. - Cleaned up and simplified add_client() and associated circuitry. - Connections to back end servers are now nonblocking and parallel. - Removed the -n option and all code explicitly using blocking sockets. - Removed the -D option and the "delayed forward" feature. - Renamed server and client fields in the conn, client and server structures to better reflect what they are. - Restructured the add_client, store_client, store_conn and try_server functions. - Allow write_cfg to save IPv6 and GeoIP access lists. - Fixed a bug in write_cfg, where Pen would try to write to an unwritable file. Reported by Steven Myint - Return UDP replies from the server to the client. - UDP load balancing code restructured and bugfixed. - In mainloop_select: When there is a pending connection, keep accepting up to multi_accept times *or* until EAGAIN *or* connection table is full. This improves performance under load. - Updated GeoIP support for IPv6. - Servers can have ipv6 addresses. It is possible to use a mix of ipv4 and ipv6 servers: ./pen -df -S 2 -r :::2222 [::1]:22 [127.0.0.1]:22 - In order to allow server addresses with : in them (i.e. ipv6), it is now possible to use square brackets around the address part of the server specification: [address]:port (e.g. [::1]:8080). - Pen can now listen on ipv6 sockets in addition to ipv4 and unix ones. I.e. things like "pen ::1:2222 127.0.0.1:22" are now possible. - snprintf format errors reported by Christopher Meng fixed in pen.c and penctl.c. - Updated pen manpage to clarify what the control socket does. - Resist opening control socket running as root. - Remove the default file name for web log. - New feature: unix domain listening sockets. - Redesigned server and client structs to allow ipv6 addresses and require less casting (yuck) in the code. - Updated penctl man page with syntax for IPv6 and GeoIP access lists. - Fixed cosmetic signedness compiler warnings. - Moved defines for ACE_IPV4 et al outside #ifdef HAVE_SSL clause. Otherwise pen won't compile without ssl. - GeoIP access lists. - Added "special exception" clause for linking with OpenSSL. - Penlog ipv6 compatible. - Modernized automake configuration. - Penctl ipv6 compatible. - Updated autoconf to 2.69. - Updated SSL code. Protocol ssl2 removed. Default changed to tls1. - Added UDP patch from Zen. - Added patch from Debian that fixes some issues with penctl.cgi. - Priority based server selection algorithm. - Patch from Stephen P. Schaefer fixes several issues in write_cfg. - In the server_by_weight function, multiply current connections by WEIGHT_FACTOR to make the selection mo fine grained when the number of connections is small. - Patch from Dana Contreras: send stdio to /dev/null after forking. - Fixed a bunch of cosmetic signedness compiler warnings.
- Loading branch information
