Keylinc Dimmer level resetting to 100% in the UI after a scene is setting it to 15%

[BradNagel]

Hi, I just recently converted from the built in Insteon integration to Insteon-Mqtt so this maybe a configuration issue on my part. But really want to figure this out since everything else seems to be working perfectly.

I have a Keylinc dimmer setup in my kitchen that I dim using a scene at night. For some reason while everything does dim the UI in HA does not see the 15% I have the brightness set to in the scene. Instead it shows 100%... Thinking of a work around I decided to do a forced refresh to pull the current status. That does work and it shows the correct brightness after the refresh but ends up going back to 100% after you refresh the HA web page or go back into the HA app later. So its like it only refreshes the screens but not the value in HA for later. If I manually go into HA and adjust the brightness level it sticks and works correctly. My questions is if there is a configuration I'm missing for this scene so the keylinc pad knows how to correctly set the brightness level?

Edit: It's not on refresh of the app like I said before. It ends up resetting to 100% after around a minute or so after calling for a refresh of the status.

[BradNagel]

I ended up doing a complete factory reset if my setup and after setting it up those time everything is working correctly