Copyright 2021 SuperHouse Automation Pty Ltd www.superhouse.tv
A set of general purposes boards and mechanicals for rack mount projects.
DIY rack-mount projects often require an Ethernet connection, a status display, power regulation, and other features that are not specific to the project.
The Universal Rack Controller provides a set of compatible mechanicals and modules that you can mix and match to build your own rack-mount projects. You can either use the Rack32 ESP32-based control board with Ethernet and PoE, or fit your own controller inside the enclosure with connectors such as Ethernet and USB passed through the front panel.
This allows you to use a Raspberry Pi, a Nano-ITX mobo, an Arduino, or whatever other board best suits your needs.
Features:
- RJ45 socket for Ethernet.
- USB-C socket for comms or flashing firmware.
- 1.54" SPI LCD.
- Back-panel connectors for power.
The Rack32 board can be found at:
https://www.superhouse.tv/rack32
More information:
The design is saved as an EAGLE project. EAGLE PCB design software is available from www.cadsoftusa.com free for non-commercial use. To use this project download it and place the directory containing these files into the "eagle" directory on your computer. Then open EAGLE and navigate to the project.
Designed by Jonathan Oxer [email protected]
The specific terms of distribution of this project are governed by the license referenced below.
Licensed under the TAPR Open Hardware License (www.tapr.org/OHL). The "license" folder within this repository also contains a copy of this license in plain text format.