Thumbnail don't work for RRF #2741
Labels
bug
Something isn't working
Comments
|
I've manually changed the thumbnail declarations in a sliced file to the same as PrusaSlicer outputs to check if it makes the thumnails show, and it does. OrcaSlicer outputs: Prusaslicer outputs: Should be a quick fix, the "faulty" code was introduced with commit ac67387 . |
Exerqtor
added a commit
to Exerqtor/OrcaSlicer
that referenced
this issue
Nov 15, 2023
Should remidy the issues in SoftFever#2741
SoftFever
pushed a commit
that referenced
this issue
Nov 16, 2023
Fix for QOI not working Should remidy the issues in #2741
ohmdelta
pushed a commit
to ICRS/icrs-slicer-private
that referenced
this issue
Nov 24, 2023
Fix for QOI not working Should remidy the issues in SoftFever/OrcaSlicer#2741
PilotMatt
added a commit
to printago/OrcaSlicer-PrintagoEdition
that referenced
this issue
Dec 4, 2023
commit 7c0a061 Author: SoftFever <[email protected]> Date: Sun Dec 3 20:23:55 2023 +0800 Fix mac notary commit be1bd08 Author: SoftFever <[email protected]> Date: Sun Dec 3 09:20:29 2023 +0800 Fix precise wall for Arachne wall generator (SoftFever#2966) Update WIKI for it commit f052206 Author: SoftFever <[email protected]> Date: Sat Dec 2 12:45:02 2023 +0800 Improve PA calibration Line method so it works for bed origin not in (0,0) commit e502ffa Author: SoftFever <[email protected]> Date: Sat Dec 2 01:47:24 2023 +0800 Update locale commit 7237855 Author: SoftFever <[email protected]> Date: Thu Nov 30 23:58:52 2023 +0800 Build release branches commit a18f42e Author: SoftFever <[email protected]> Date: Sat Dec 2 01:27:22 2023 +0800 bump version to V1.8.1 commit b4b9805 Author: SoftFever <[email protected]> Date: Sat Dec 2 01:27:09 2023 +0800 disable misleading 3mf version warning commit e823044 Author: SoftFever <[email protected]> Date: Fri Dec 1 23:13:26 2023 +0800 Improve arc fitting when new overhang slowdown is used (SoftFever#2942) (cherry picked from commit 3923b9c) commit f2f2ede Author: SoftFever <[email protected]> Date: Sat Dec 2 01:27:43 2023 +0800 thick internal bridges (SoftFever#2954) commit 3a8b799 Author: Ioannis Giannakas <[email protected]> Date: Fri Dec 1 15:50:58 2023 +0000 Internal Bridge Flow rate parameter introduction Updated internal bridging flow change and reverted bridge PR (SoftFever#2943) Updated internal bridging flow change & reverted bridge PR (cherry picked from commit ae9a2d5) Internal Bridge Flow rate parameter introduction (SoftFever#2859) * Internal Bridge Flow rate parameter introduction * updated incorrect capitalisation * Updated parameter ordering (cherry picked from commit ce9a8d7) commit 5676e0e Author: SoftFever <[email protected]> Date: Sun Nov 19 19:08:04 2023 +0800 Merge pull request SoftFever#2780 from Noisyfox:bugfix/amd-png Fix PNG build plate texture not rendering on AMD GPUs (cherry picked from commit 93f62a4) commit 8829853 Author: SoftFever <[email protected]> Date: Fri Dec 1 22:27:27 2023 +0800 Revert "Adding new nozzle profiles for the Creality Ender-5 Pro (2019) (SoftFever#2817)" This reverts commit 09a8fa3. commit 09a8fa3 Author: Paul <[email protected]> Date: Wed Nov 29 15:32:58 2023 +0100 Adding new nozzle profiles for the Creality Ender-5 Pro (2019) (SoftFever#2817) * Add 0.6mm Nozzle Configurations for CE5Pro * Add 0.5mm Nozzle Configurations for CE5Pro * Add Nozzle Size Printer Variants 0.2-1.0mm * Add 0.3mm Printer Variant * Add 0.5mm Printer Variant * Fix: 0.6mm Printer Variant * Add Remaining Printer Variants * Add CE5Pro Nozzles to list of Compatible Filament * Add Generic FDM Process for Creality 0.3 Nozzle * Update Generic FDM Process for Creality 0.6 Nozzle * Add FDM Process for Remaining Creality Nozzle * Add Processes For CE5Pro 0.8mm Nozzle * Add Processes For CE5Pro 1.0mm Nozzle * Add Processes For CE5Pro 0.2mm Nozzle * Fix Initial Layer Settings * Add Processes For CE5Pro 0.25mm Nozzle * Add Processes For CE5Pro 0.3mm Nozzle * Remove Profiles Outside their Min/Max Layer Height * Update CE5Pro 0.4 Nozzle Naming Scheme to PR1100 * Update CE5Pro 0.2 Nozzle Naming Scheme to PR1100 * Update CE5Pro 0.25 Nozzle Naming Scheme to PR1100 * Update CE5Pro 0.3 Nozzle Naming Scheme to PR1100 * Update CE5Pro 0.5 Nozzle Naming Scheme to PR1100 * Update CE5Pro 0.6 Nozzle Naming Scheme to PR1100 * Update CE5Pro 0.8 Nozzle Naming Scheme to PR1100 * Update CE5Pro 1.0 Nozzle Naming Scheme to PR1100 * Incl. Remaining Base Config That Diff Is Based On * Remove whitespace (cherry picked from commit eab8139) commit 4dbd866 Author: Andy <[email protected]> Date: Wed Nov 29 21:33:52 2023 +0700 Russian translation update OrcaSlicer V1.8.0 Release. (SoftFever#2873) * Russian translation update Russian translation update * Russian translation update Russian translation update (cherry picked from commit 48c9143) commit c122c76 Author: Trist0ne <[email protected]> Date: Wed Nov 29 09:35:30 2023 -0500 T500 profile fixes and optimizations (SoftFever#2848) Corrected corrupted buildplate texture, corrected too high accelerations that made printing 0.4mm impossible, optimized T500 print and filament profiles with testing (cherry picked from commit 10a0f58) commit 79a7221 Author: FlashforgeOfficial <[email protected]> Date: Wed Nov 29 22:36:09 2023 +0800 Flashforge: Machine G-code Fix (SoftFever#2922) Machine G-code Fix (cherry picked from commit 930eac0) commit 5f89963 Author: Ioannis Giannakas <[email protected]> Date: Mon Nov 27 13:39:16 2023 +0000 Fix crash when closing application (SoftFever#2904) * Update GUI_ObjectList.cpp * Update GUI_ObjectList.cpp (cherry picked from commit d71eaf9) commit b5b5e03 Author: Ioannis Giannakas <[email protected]> Date: Tue Nov 28 12:44:29 2023 +0000 Fix purging not working for BBL printers (SoftFever#2912) commit f5ec607 Author: SoftFever <[email protected]> Date: Fri Nov 17 20:00:12 2023 +0800 update WIKI commit cb038d0 Author: SoftFever <[email protected]> Date: Fri Nov 17 20:00:05 2023 +0800 fix Prusa MK3S and Mini profile issues Fixed SoftFever#2768 commit 698440d Author: mariuske <[email protected]> Date: Fri Nov 17 12:40:03 2023 +0100 Removed print_flow_ratio from Flashforge process (SoftFever#2769) For some reason this value stayed in this profile file after a recent merge and it's now been removed again. commit b264203 Author: Noisyfox <[email protected]> Date: Fri Nov 17 14:28:48 2023 +0800 Fix creality k1/max default materials (SoftFever#2609) (SoftFever#2767) commit 4dcfd97 Author: SVNMLR <[email protected]> Date: Fri Nov 17 01:01:52 2023 +0100 [Multi Material] Fix first layers of prime tower when using "no sparse layers" (SoftFever#2764) * MM - Add check for first layer * Change: If no sparse layer is on -> Respect the toolchange in the first-layer checkup, to use a brim and slow down printspeed if using a primetower * Fix comment commit 9505f93 Author: SoftFever <[email protected]> Date: Fri Nov 17 07:54:59 2023 +0800 fix thumbnails regression commit bc05653 Author: SoftFever <[email protected]> Date: Thu Nov 16 23:25:28 2023 +0800 orca bot: processing issues in ascending order commit 9af22da Author: SoftFever <[email protected]> Date: Thu Nov 16 23:17:59 2023 +0800 bump version to 1.8 commit 09c77c4 Author: SoftFever <[email protected]> Date: Thu Nov 16 23:02:10 2023 +0800 update profile version to 1.08.00.00 commit 6c957d4 Author: mariuske <[email protected]> Date: Thu Nov 16 15:07:02 2023 +0100 Restructured Flashforge process profiles (SoftFever#2718) * Restructured Flashforge process profiles * Fixed typo in machine profiles * Changed skirt loops to 2 Based on best practise (other profiles), I have changed the number of skirt loops from 1 to 2 commit 75c019a Author: Andy <[email protected]> Date: Thu Nov 16 21:02:13 2023 +0700 Russian translation update (SoftFever#2760) Russian translation update commit 7566df5 Author: SoftFever <[email protected]> Date: Thu Nov 16 19:42:30 2023 +0800 fix snapmaker J1 not displaying bug fixed SoftFever#2750 commit 2fc5a7d Author: Noisyfox <[email protected]> Date: Thu Nov 16 19:15:37 2023 +0800 Fix layer height modifier layout (SoftFever#2708) (SoftFever#2756) commit 565732a Author: SoftFever <[email protected]> Date: Thu Nov 16 19:07:40 2023 +0800 remove print_flow_ratio from profiles and hide it from process setting. It should be only displayed for parts commit e8ac157 Author: FlyingbearOfficial <[email protected]> Date: Thu Nov 16 18:46:32 2023 +0800 Flyingbear official patch 9 (SoftFever#2746) * Add a new brand named Flyingbear Add a new brand named Flyingbear Model name: Flyingbear Reborn3 * Update fdm_machine_common.json fix z_hop 0,2(2) * make bed model smaller and set default internal_solid_infill_pattern to monotonic --------- Co-authored-by: SoftFever <[email protected]> commit 24ae038 Author: Fabio Forcina <[email protected]> Date: Thu Nov 16 11:18:50 2023 +0100 Italian translation (SoftFever#2706) * Update OrcaSlicer_it.po * Italian translation Italian translation * fix errors --------- Co-authored-by: SoftFever <[email protected]> commit f61c504 Author: Exerqtor <[email protected]> Date: Thu Nov 16 11:13:08 2023 +0100 Fix for QOI thumbnails not working (SoftFever#2755) Fix for QOI not working Should remidy the issues in SoftFever#2741
hliebscher
pushed a commit
to hliebscher/GalaxySlicer
that referenced
this issue
Dec 11, 2023
Fix for QOI not working Should remidy the issues in SoftFever/OrcaSlicer#2741
J-DRD
added a commit
to J-DRD/GalaxySlicer
that referenced
this issue
Dec 25, 2023
* Add option to "Reverse only internal perimeters" under the reverse on odd feature to reduce part warping * rem unused files * wire frame * wireframe mmu * rework UI Jobs * update ui jobs * fix progess * fix dark mode radius * Update cereal version * fix * fix cereal * Initial port of Emboss gizmo * text rotation * cgal fix * fix text dragging * Add text gizmo to right click menu * svg gizmo * fix text * Fix linux build * Update README oppened -> opened * fix * fix .gitignore * fix from surface * fix 90 rotation * fix path * style * Fix cmake error (#2871) Use the correct target name when setting properties on cereal. * Internal Bridge Flow rate parameter introduction (#2859) * Internal Bridge Flow rate parameter introduction * updated incorrect capitalisation * Updated parameter ordering * fix_running * minor revisions to GUI * Housework for Printer Profiles #1 - Revert decision to create './extra_printer_profiles/' at this time #2 - Import modified profiles for Bambulab X1-Carbon from %APPDATA% * update deps * Update build_win_x64.yml * Support initial_tool variable for filename format * fix printer * Update translation Korean (#2731) update translation korean * limit max wipe tower speed to 90 mm/s * fix wipe tower bug: filament end inserted twice * Fix for QOI thumbnails not working (#2755) Fix for QOI not working Should remidy the issues in https://github.com/SoftFever/OrcaSlicer/issues/2741 * orca bot: processing issues in ascending order * fix thumbnails regression * [Multi Material] Fix first layers of prime tower when using "no sparse layers" (#2764) * MM - Add check for first layer * Change: If no sparse layer is on -> Respect the toolchange in the first-layer checkup, to use a brim and slow down printspeed if using a primetower * Fix comment * Rework Github Build Actions (#2566) update workflows from dev branch Co-authored-by: SoftFever <[email protected]> * Zip Windows portable build and PDB before upload artifacts * Fix purging not working for BBL printers (#2912) * Update BuildLinux.sh (#2919) getting the value for FOUND_GTK* variables seems to cause an error which prevents using the -u option to install the needed packages. This is fixed by moving the "exit on first error" flag to after setting these vars. * Some changes to gcode window toggles (#2704) * Show gcode window automatically (#2572) * Move the show gcode toggle to view menu, and remember if gcode window is shown last time * fix an issue when merging main branch --------- Co-authored-by: SoftFever <[email protected]> * Use windows API to copy files (#2923) * Build release branches (#2941) update cicd to build release branches * Feature/bs1.8beta (#2844) * ENH: Show Recent File Image Keep Scale Change-Id: Ib8a6cf916eaee8e353bf858bc4f2ea503705809e * FIX: wipetower position problem jira: STUDIO-4914 Change-Id: I7b05d3c53931ed8ce3d4603ff21ee6ef675611e5 * FIX: dailytips adapts screen scale jira: STUDIO-5019 STUDIO-5026 STUDIO-5027 STUDIO-5028 STUDIO-5025 Change-Id: I63d3af1870218ba8e0f048a6ef03fb29fabe27cb * FIX: generate process preset based on template Jira: XXXX Change-Id: I50adf0790dc239307d236a4cebece860ef6beb16 Signed-off-by: maosheng.wei <[email protected]> * FIX: object list plate name edit Change-Id: I61d3dcd7d9598d759a3a0b44cc77d2af2adca25a Jira: STUDIO-4937 * ENH:no longer checking nozzle type jira:[for nozzle type check] Change-Id: I0e88445a264f21b0c11519e9a22a165d05611d14 * ENH: improve first layer tree support First layer support can't be top interface, and min brim width of auto mode should be larger than 0. Jira: STUDIO-5010 Change-Id: I02f8b017b535f8a47965387e8679f692b1966e04 (cherry picked from commit 3e7d54abe352e8ab5f9d6492b5a86a96f9067f94) * ENH: version: bumped to 1.8 JIRA: no jira Change-Id: I50903098b59f1dd9a6b6cf7656cec7d388f3ff17 * ENH:try again after subscription failure jira:[Try again after subscription failure] Change-Id: Ibfb1e8e26eb166d786a372632a86ef98030db034 * ENH:display msg dialog once jira:[for http error msg] Change-Id: I12e9c155fdb567cac99c35b6feeef650269ba75d * ENH:remove config.json file Change-Id: Idfcf3a63fefe968e88153c26fb691fd05cd83dc4 * ENH:add protection in threads jira:[for random crash] Change-Id: I6286012dd77abccba461f7cd72a6fc531a84c95f * FIX: add protection for get_model_task_thread thread Jira: XXXX Change-Id: I3cbc17d181a0e13c658f31eaeb6a4df878e6df41 Signed-off-by: maosheng.wei <[email protected]> * FIX: delete all compatible presets when delete third printer Jira: XXXX Change-Id: I1a294402627e7ab7a8c6701f20679b3d04aff059 Signed-off-by: maosheng.wei <[email protected]> * ci: update build version to 01.08.00.51 Change-Id: I20a01adacbdb5fe69c106b9efd029f7308136e10 * ENH: default open support_interface_not_for_body jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: I48e084deb18633f9ec47a8ec4ec643163bf66318 * ENH:modified text with too low version jira:[for low version] Change-Id: I862a0defda976a35f326a8805e002330f2ed7fdf * NEW:update printer config file version Change-Id: I9a46b29b03beb67a3da0b8f76d8b5c4b3c482928 * FIX:The plane should rotate around the world coordinate system Jira: STUDIO-5054 Change-Id: I16e484b38d79cabd9473acf1abf3c5c6b0adc4c6 * ENH:translate for limit file size and so on Jira: STUDIO-5007 Change-Id: I2c279eb690841aa51cd8128f8028266cbc17e977 * ENH:use on_render_rotate_gizmos() replace GLGizmoRotate3D::on_render() Jira: STUDIO-4227 Change-Id: If9b9ea5596e59472d5fa87ac56aeb7f6ecc65643 * FIX: some mistakes in filament profiles jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: Ibe7f3650f2d9cf47561dd5f2ec591a5f6c553503 * FIX: fix shard_ptr is null Change-Id: I0187cf64ffbb08a2265a11900b5c865e9ac9678f * FIX:N1 printer image in dark mode JIRA:STUDIO-4057 Change-Id: I22c001d96839daf213d5096f6ff6e3d6398fa8c4 * FIX: create printer issue Jira: 5034 5059 5053 5034 create printer but filament is repeat 5039 create successful dialog remove to center 5053 create existing printer copywriting adjustments and preset updates Delete printer secondary confirmation dialog Change-Id: Ifb3822d1e168459d2af11e02b31ecaf3719d338a Signed-off-by: maosheng.wei <[email protected]> * ENH:just don't check the nozzle diameter jira:[for nozzle check] Change-Id: I678e7d62832eaa14b9be47d6dce70f29ebd601f6 * NEW:p1 and x1 series added motor noise calibration JIRA: 5085 Change-Id: Id73cc2d34b6130f215d81ffcdc39ba6b241445bf * ci: update build version to 01.08.00.52 Change-Id: I93d800b413f2751d132fac53fbd9b191603d0352 * FIX: ObjectSetting changed when search plate JIRA: STUDIO-5095 Signed-off-by: Kunlong Ma <[email protected]> Change-Id: I39b1ad997d51ac4224ff5ad2b3555f56da4bd911 * FIX: invalid support params in 3rd party profiles Many params are not right.Just use default jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: I5c4a1e8b046940e174f5681a79031b5f20fcafc5 * ENH: update A1 mini start gcode Change x-axis freq sweep amp 5->10 jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: I2e731cc6392c0204d5e4467bf4b933ab233bc157 * FIX: [STUDIO-4946] use utf8 path to create sub process Change-Id: I5873c114e8cd36978a7d50bf13c3aa7bf8b740ca Jira: STUDIO-4946 * FIX: fix a plate state not correct issue JIRA: no-jira the object and instance states lost after undo Change-Id: I527df9a7d426d994501a4ed5bbb198c7bbac810b * FIX: some translation Jira: 5096 5089 5036 5004 Change-Id: I4f1bd6e352b11451f5caf02cbc4eeb31dfa03eee Signed-off-by: maosheng.wei <[email protected]> * FIX: [STUDIO-4935] plate name edit in object list Change-Id: I271fa217281d0c7ceca61166497136628a66681e Jira: STUDIO-4935 * FIX: take custom root as AMS sync candicate Change-Id: I9c71babcd74238d1533b15d77a978b19997c70c0 Jira: none * FIX: modify some default support params in code 1. Modify default values of some supports params, so 3rd party profiles are easier to setup. 3. Fix a bug that organic support may cause crash. Jira: none Change-Id: Icae348d8fe5985f4287404e96089198a499283f2 (cherry picked from commit 8889cfc703b72e142f288e525b89c87619f2213c) * FIX: do not generate sheath for normal support Jira: none Change-Id: I8f3f3e39171055f8d18c06ceee8e245594273238 (cherry picked from commit 93bc7ecf4346f179f502bebc3cf47b0030b56e2c) * FIX: push_notification on GUI thread Change-Id: Iaec347f5684fe0f65d6418759518189b67033c42 Jira: STUDIO-5106 * ENH: CLI: add some params to support more functions 1. uptodate_filaments to support update the original filaments to newest config 2. allow_rotations/avoid_extrusion_cali_region for auto-arrange 3. skip_modified_gcodes to support skip modified gcodes JIRA: STUDIO-5112 Change-Id: I95c09af1b5462cce3bf27aea32228d6d1d1d201d * FIX: missed manually entered values for secondary processing Jira: STUDIO-4964 Change-Id: I5cf0da1ae77cccd34de05b4a0318a751ac9f6753 * FIX: Z hop is still enabled when upper boundary is zero. Jira: STUDIO-4893 Signed-off-by: wenjie.guo <[email protected]> Change-Id: I5f46a02e1fbb15ff43e253e3a184aa6cc38e7598 * ENH: update default filaments for Bambu printers jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: Ic6380f39e546854ad0b7dc36929a8605c9ab3acc * ENH: dailytips modification 1. modify closing behavior 2. dailytips can adjust self size according to the canvas size. And also adjust GodeViewer legend window size 3. fix a button text encoding bug 4. support vertical/horizontal layout(horizontal layout currently not used) jira: new Change-Id: I8e0b6e85c455d0608d7388fb441829c1991ad01f * FIX: [4857 5097] export list and del preset two confirm issue Jira: 4857 5097 Change-Id: If7cc4967a663f575527a227e9c4ac31e0491930c * FIX: UUID conflict issue when referencing volume Jira: XXXX 3mf file standard Change-Id: I953a87294684ea85d03a95e7d2843c096904aeae Signed-off-by: maosheng.wei <[email protected]> * FIX: [4483 5003 5109] create printer and edit filament issue Jira: 4483 5003 5109 4483 dialog blink 5003 preset list too long 5109 encode Change-Id: I190e12272ca09f36b841f2f85a6cf60f2c2614bd Signed-off-by: maosheng.wei <[email protected]> * FIX: cloud use presets limit notify Change-Id: I6cc7b4e560cb83db0fc30921633b10531957128e Jira: STUDIO-5091, STUDIO-5104 * FIX: do user preset sync later on startup Change-Id: I0653a0438477b1c803ce1cddc66ef47f95616dae Jira: STUDIO-5106 * FIX: linux: pressing enter in height range will crash jira: STUDIO-4391 Change-Id: I6bf990951d1456f5b2605b8d62a05bceb3cc4c10 * FIX: failed to limit the max width of DropDown Jira: STUDIO-4503 Signed-off-by: wenjie.guo <[email protected]> Change-Id: Id9352d16f4bc016daade72a9c8d3d90164a1cb3d * FIX: not jump to preview after first wizard Change-Id: I8c94d66a91aa15a7874441a300b40438638bd33b Jira: STUDIO-5018 * ENH: CLI: clear custom gcodes when skip_modified_gcodes JIRA: STUDIO-5112 Change-Id: I2e7346d2ac57519029a4e80e5492c34d3d91ed77 * FIX: [4492 4851 4883 5121] create printer issue Jira: 4492 4851 4883 5121 Change-Id: If252b5f30be0403f79410aa8c00fc14b066d5bbd Signed-off-by: maosheng.wei <[email protected]> * ENH: add 'edit preset' and 'delete preset' btn for each preset Jira: 5200 5113 Change-Id: I208ad63eb4b895306fa76db424da2e1df10a582e Signed-off-by: maosheng.wei <[email protected]> * FIX: add skip label before tool change Jira: 5074 github: 2776 Signed-off-by: qing.zhang <[email protected]> Change-Id: Icaafd3b45da1e78c1a82e7d17d7505d9439b9100 * FIX:Network test dark mode adaptation JIRA:STUDIO-2468 Change-Id: I20cb7f1fd8eca3ce852acb563c1cc87978e216dc * FIX:n1 external feed prompt pop-up without retry button JIRA: STUDIO-4696 Change-Id: I31069c72e29d3398469d71cdbc2a344a5430fc2c * FIX: not show device page when switch printer preset Change-Id: I00d8524625a4682b6a39876ddb66bf8bd928dbef Jira: none * ENH: Check the nozzle diameter when sending calibration Jira: 4977 Change-Id: Iabbba44583bbd9fbaaa889ca546ee0ccbb2aa77f * FIX: Generate UUID from objectID and volumeIndex Jira: XXXX Change-Id: I65147ef9b695f8af8de260d722e604b0e0bab563 Signed-off-by: maosheng.wei <[email protected]> * FIX: disable filament_typep Jira: XXXX Change-Id: Ib605b33e4474525fbe49e70596fc09aa356f478a Signed-off-by: maosheng.wei <[email protected]> * ci: update build version to 01.08.00.53 Change-Id: I1d574fa2cf2a4d0eb63a38eb8ced7587d06a4272 * ENH: refine display logic of param 1. Refine the display logic of "support_interface_not_for_body".Only toggle if support_filament is default and support_interface_filament is specified jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: Ia2af030c4531ad6b04a198bfe8a1677b3d20a800 * FIX: user preset sync token Change-Id: Id2aa865b778ee9ac4cfddb68ceef0374507b519b Jira: none * FIX: Bitmap cache not take effect Change-Id: I972098fdbda0b4542c6c759a8f5e1f0f2a30852b Jira: STUDIO-4991 * NEW: Open HotModel Link With GetParam-From bambustudio JIRA: NO JIRA Change-Id: I4ac49bac5ee0c50988c76a38b00b7ba7dc3201f5 * NEW:AmsMaterialsSetting Support for user-preset JIRA: STUDIO-5135 Change-Id: If848047cd5dbd059d440de30989c505c361305a7 * FIX: upload custom root preset fail Change-Id: I621c8d542dd604b07cc5df63d97d7a31558d3aba Jira: none * FIX: show custom filament in AMS filament list Change-Id: I79b9f8f2f08db8c52bbed76f1ea133baff383c00 Jira: none * FIX: dailytips window and gcodeviwer legend window size issue reset to original logic of dailytips and legend window size jira: new Change-Id: Iacb016bb222ba3f87317cfbe1f2b003802d773a5 * ENH: add text translation jira: new Change-Id: I780cfb8a0a64d806b5e0a414b6598e3b7bdf52dc * FIX: Delete and search object outside the plate JIRA: 1. STUDIO-5132 Deleting object outside the plate will crash 2. STUDIO-5146 The search function cannot search for object outside the plate Signed-off-by: Kunlong Ma <[email protected]> Change-Id: I84cb3fe990a9c2a182e7434c262466a70545280e * FIX: [5149 5142 5141 5140 5136] create printer and filament issue Jira: 5149 5142 5141 5140 5136 5149 process preset name can not show all 5142 improt configs combobox not update 5141 disable modify filament_vendor 5140 disable input Bambu and Generic vendor 5136 preset list window adjust Change-Id: I111a23996146cc16cc7f533c8616d50223d34c40 Signed-off-by: maosheng.wei <[email protected]> * ci: update build version to 01.08.00.54 Change-Id: Ifd69c01a82f627a9c6cf4fe0d48a759563ee90e7 * FIX: print model from sdcard with p1p Change-Id: If85383ba762022ead3dd754ae02a08817b891114 Jira: none * FIX: dailytips text translation jira: STUDIO-2556 Change-Id: If44e503615b09ee1692f42ba1f998918ec5bd691 * FIX: clone shortcut key conflict with quit in macos jira: STUDIO-5166 Change-Id: I548f275bb68d3b0e6bb3cfad6fe93df09d507da3 * FIX:User preset material settings dependent on firmware JIRA: 5167 Change-Id: I82cf26848594b01155883ad0aa2e9ee77d371fb2 * ENH:update the description of nozzle detection Change-Id: Id27b25c69dc11fcf66fc82053af705906ae8c370 * FIX: [5159 5165 5171 5172] create printer and filament issue Jira: 5159 5165 5171 5172 5159 create printer dialog no refresh 5165 create printer 2 step dialog no refersh 5171 change font 5172 edit filament dialog darkUI issue input special character is prohibited '/' in preset name translate to '-' update printer combobox Change-Id: I5fa27836dab7f604f1a065c65efa099c7a2f0f96 Signed-off-by: maosheng.wei <[email protected]> * ci: update build version to 01.08.00.55 Change-Id: If1865d561cf274719204662314de163497759e89 * FIX:fix GLmodel deconstruction causing section not to be rendered Jira: STUDIO-5156 Change-Id: Ibb2f459920989ee54f7b827352dc8893424b4de6 * FIX: missing unlock cause device or resource busy Change-Id: I87563312ea9c6ce4e4e471da7ce7a02b53b64762 * FIX: some translation Change-Id: I9758cbc758030b5a3945697a50ca4898af9fcb1b * ci: update build version to 01.08.00.56 Change-Id: Id5ee53dd2ebb0b37b6927dc58b3cca94a1f66a83 * ENH: remove PLA GLOW in A1 mini jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: Id99c1bbd4248e28df9150a85eecec831f6f32856 * ci: update build version to 01.08.00.57 Change-Id: Ib4dfa60f097128b76b95bb14ca04978619021b56 * Allow line width of nozzle diameter * 2.5 As it were, 1 mm would be disallowed but 0.99 would be allowed for 0.4 nozzle. 1 mm is the sane maximum and 0.99 is unnecessary tedious to write. * Russian translation update Russian translation Bambu Studio_v1.8.0 Beta * FIX: scale problem in needs_retraction jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: Idfbe954b22fa6aa5769c55e46874fa6a80ecbf45 (cherry picked from commit 4e853f50b748e3af11e2d64862b6ee557fda361b) * ENH: CLI: support load_assemble_list JIRA: STUDIO-4848 Change-Id: Ife11533740988331ea71eac86c370e625970cb8b * FIX: align to Y not working This is a bug introduced in 7fbb650 when solving jira STUDIO-4695. Now we use a more decent way to solve it. Change-Id: I92deffcb9fe53e8a24c93fe973446ae37df07375 (cherry picked from commit bd98430dbd15eb6c9bb4b447990e0dcf8a50eef0) * ENH: Add buried points for cut and meshboolean JIRA: NONE Signed-off-by: Kunlong Ma <[email protected]> Change-Id: I67ce498d0c335dd7a8582f56b880c2c8314f8541 * FIX: 5092 edit filament add scrolled window Jira: 5092 Change-Id: I53ae996b04e4e2f1b1ddce6a858d505001b11615 Signed-off-by: maosheng.wei <[email protected]> * FIX: can not select user preset when create filament Jira: XXXX github: 1936 and fix add preset for printer dialog can not show selected printer Change-Id: Id4308c6bdca17d52d4aa321db359941aa87e0e45 Signed-off-by: maosheng.wei <[email protected]> * ENH: template filament don't be show in filament list and sort Jira: 5160 5179 Change-Id: I56a7e1897e1ef3c061dc66d318896413ca25b76b Signed-off-by: maosheng.wei <[email protected]> * FIX: [5174] export configs dialog issue filament name too long to can not show all Jira: 5174 Change-Id: I92018c9d7f86009b78b533592d899b4b5d78c3c8 Signed-off-by: maosheng.wei <[email protected]> * ENH: add filament Bambu TPU 95A HF 1.As title jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: I752ec43da6297a6c172679997ce68f2318a7b8fb * ENH: modify some params with filaments 1.Modify the PEI bed temperature of PLA Basic, Matte, and Tough to 65 in A1 mini. Set the bed temperature for the first layer of Bambu PETG-CF to 65 and 70 for the other layers jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: Ia902bbb7f824082d5346709d781cac64296f47a8 * ENH: add more status during printing JIRA: STUDIO-5195 Change-Id: I85b3107839c6e2fdecbc10d90a876463e284468c Signed-off-by: Stone Li <[email protected]> * FIX:cut imgui has overlapping rendering on Apple Jira: STUDIO-5150 Change-Id: I7969e19dc189cd617026a183067dad628208955c * FIX:not TakeSnapshot for m_start_dragging_m Jira: STUDIO-5176 Change-Id: Ia03e3e2c2664dbdcffa19ec8d0fa97dfd95e6d35 * FIX: rendered color changes Jira: STUDIO-4956 during the drag processin connectors editing state Change-Id: I3027176ea9f93a9ba9d6a2052f41aaa4adef79f1 * FIX: merge the patch from Prusa Thanks for PrusaSlicer and YuSanka Jira:STUDIO-5175 commit 510d59687b3b19c4a0f4e6540620d0694dd1b7ac Author: YuSanka <[email protected]> Date: Thu Oct 5 14:13:14 2023 +0200 Follow-up 1b451cdf: Fixed #11415 - Connectors disappear when slicing => only when using multiple cut planes AND excluding parts Change-Id: I9ccd5b85f482d723d21fccf5e104c9e0a9cc4849 * FIX:Press ESC directly to exit after entering the profile rendering rendering is not normal，Code from PrusaSlicer,thanks for PrusaSlicer and enricoturri1966 commit a078627552f54497ed0518dc7bc349d243576d19 Author: enricoturri1966 <[email protected]> Date: Mon Jan 30 14:00:02 2023 +0100 Follow-up of 1218103fd620b319c56fd08116f81b581c537188 - Fixed gizmo missbehavior when closing a gizmo by resetting the selection clicking on the scene Jira: STUDIO-5164 Change-Id: I261da9dba2a5ac37f3e263c175fbccd80d8045bd * FIX: correct the strings and move create printer dialog center Jira: 5221 5183 Change-Id: Ida4eba63f0e962ffcc8000fcc04cf20849577217 Signed-off-by: maosheng.wei <[email protected]> * ENH: CLI: skip layer height limit validate when slicing for existing models JIRA: no jira Change-Id: I1444a28b500ca7d08ed2606eecfa5cfaf261105e * ENH:update the translation of auto refill jira:[for translation] Change-Id: Iaa7b4f3d7cd88c8b4f69a3db721ebd8ca8986eea * FIX: icon issue for copying Jira: STUDIO-4168 Icon issue when filling bed with copies Change-Id: I61a03ecae02b75602c236ed2810e9c9cfe5a19f9 (cherry picked from commit b5079f8a2e79f19f65803f23ef4fd83aff17c84a) * ENH: update some filament params 1. Modify texture bed temp to 65 2. Modify max-v-speed for ABS 3. Modify some params in Generic PA 4. Modify PLA,PVA params jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: I42584a6015b8526f6bbb93024316968198bd76ce * FIX: 3770 printable checkbox incorrect display in darkUI Jira: 3770 Change-Id: I97f67d7a0ffc41f6ee625abeecc52ee4e73cf318 * FIX:Display garbled code in AmsMaterialsSetting pop-up Change-Id: I50531e939afa7715ae376bac47172ccf7b248114 * ENH:Modifying the Line Color of Transparent Materials JIRA: STUDIO-4311,5088,4983 Change-Id: I9e63413dc9cd7d523f0f7f1a2e32c4537a84467a * FIX: crash when async delete printer file Change-Id: I92c5e812d04da263338fb0eea2fd7583cf9ecde0 Jira: STUDIO-5222 * FIX: 3733 backup time not effective Jira: 3733 Change-Id: I50c2ce156fcbd0a17aa8a6777bce04aa6093c830 Signed-off-by: maosheng.wei <[email protected]> * FIX: enable edit and delete preset btn and fix issue Jira: XXXX Change-Id: I724d7236b28fcc4746698f094531948a8fbb5d93 Signed-off-by: maosheng.wei <[email protected]> * FIX:send print job,file name displays error JIRA:3137 Change-Id: I1c113025d274a13fba1b845a58aada14058fadd4 * FIX: skip hold user preset from sync Change-Id: I2252246e19bd80903ad82170782ea49535d30d05 Jira: STUDIO-5185 * FIX: 5115 translations Jira: 5115 Change-Id: I21b03bdd4d28c0bb097226143177e763cf8c777f Signed-off-by: maosheng.wei <[email protected]> * FIX: add link for ironing parameter Change-Id: I451f5549db3ac2205aa5703a2e5edc831e946af8 * FIX: scale problem in lift type decide 1. Scale the travel threshhold jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: Ib594d640fe63b0919bc9318af88577513f7dbf30 * ENH: add small perimeter speed and threshold The original param is added by Prusa. Thanks orca for adding threshold. 1. Re add small perimeter speed and threhold. github: #2221 Change-Id: I35b269b26f085d80f0edca28650bb21fc04898d7 * FIX: modify the picture of pa manual cali Jira: STUDIO-5102 Change-Id: Id87898959ad4461b7bd2505b159271f2aa589c36 * FIX: Filament preset is the same with the first one Jira: STUDIO-4519 Filament preset is the same wit the first one, it should align with the last one. Signed-off-by: wenjie.guo <[email protected]> Change-Id: I304d0ff0fbc1c8948d410ea552e4d42b6a4e8fd9 * FIX: scoreDailog dark mode issue Jira: 4570 Change-Id: I8be97b306a1494f73e3bba678ecc864e7ff88ca3 * FIX: CLI: fix the slicing issue while only one object with multicolor using seq-print JIRA: no-jira Change-Id: Iea2d23ff8e484bf2fd58aa2f596a8e4e4292fe39 * ENH: open support wall count for normal support 1. open support wall count for normal support Enabling this option makes normal support stronger and gives better overhang quality, but also more difficult to removal. Jira: STUDIO-5192 2. fix a bug where tree support (hybrid style) may get overlapped extrusions near the walls. 3. fix a bug where raft layers can't be 1 in tree support Jira: STUDIO-5261 Change-Id: Iadc0c67a9b50b5b221c8e83d5aa22ed282018cf8 (cherry picked from commit c0bb0084e386cb70ed6e16edf93190e4b38f5b90) * FIX: compiling error on linux jira: none Change-Id: I1a4563503b5ddf74a1979cc0cee7a15b8aced904 (cherry picked from commit de52c6ca62c9f3a6314ddf5a856c1d8534329886) * ENH: add translation for small perimeter jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: I95013649e4e0c07c0f04b89a91488814c8d228cc * FIX: clone shortcut key issue on macos jira: STUDIO-5166 Change-Id: I1967da1d443ed43bd750dad8e11560688d7bd533 * FIX: custom gcode window cannot paste/ navigate jira: STUDIO-5208、STUDIO-5070 Change-Id: I4ecb9d06cf5db0ae53a4678181aae9298bac106b * ENH: modify dailytips collapse & expand interaction jira: STUDIO-5209、STUDIO-5210 Change-Id: Ifb0b998e5004d4b49390ba5a250eaf4743bf3471 * ENH:Add shortcut keys and lists for objects search JIRA: STUDIO-5157 STUDIO-5158 STUDIO-5240 Signed-off-by: Kunlong Ma <[email protected]> Change-Id: Ic7cfaaa9b4bb8a85208bafab7fe3bafdb78f0045 * FIX:Re-calculate button with White Box displayed in dark mode JIRA: STUDIO-5098 Signed-off-by: Kunlong Ma <[email protected]> Change-Id: I07cc6c72d5dbd03b72573cd27dd5938bb0e6a29a * NEW: display plate index when printing a task JIRA: STUDIO-2689 display on the thumbnail of the current task Change-Id: I5f1f46c56e9d1e9120a66d491551908dfad099d6 Signed-off-by: Stone Li <[email protected]> * ENH:fixed incorrect path prefix jira:[for file path prefix] Change-Id: Ie9e3999f02b78272e528ceceb479e746d46a7e6c * FIX: thumbnail is not clear in dark mode JIRA: STUDIO-5087 Change-Id: Ie86493ed71b5554095927f061509a1f551758b61 Signed-off-by: wenjie.guo <[email protected]> * FIX: translation Jira: XXXX Change-Id: Id03f0d704aa852632a907ea628d1277400112062 Signed-off-by: maosheng.wei <[email protected]> * ENH: first nozzle change to 0.4 and nozzle change to mm Jira: XXXX Change-Id: I14defd36442dbd7008e46782b08415b6244224f1 Signed-off-by: maosheng.wei <[email protected]> * ENH:editing_window_width's value is small on the laptop Jira: STUDIO-5238 STUDIO-5265 apply_selected_connectors should check_and_update_connectors_state Change-Id: I8c2c1c920cc4d197d1908815a3e62f4962335451 * FIX: fix new_bed_shape's calculation process Jira: STUDIO-5122 Change-Id: I5f3e6a301a297123af28692c90bef6759f425b06 * ENH:update some translations jira:[STUDIO-5262] Change-Id: Idb1d3586888043ac325f272bc7a2b788adb3e9e5 * FIX: edit text command resets object settings Jira: STUDIO-4655 Signed-off-by: wenjie.guo <[email protected]> Change-Id: Iac25c4e40f1d0d32e6d1f40e62226cc22bc96042 * ci: update build version to 01.08.00.58 Change-Id: Iacfec02aa50c617e4c9fe566319b07b30d47dce1 * FIX: remove GetUserAgent Change-Id: I92886e1f0dcb091109231a10da8c19d51178e13b Jira: STUDIO-5205 * FIX: nozzle_diameter_map data structure adjustment Change-Id: Ifb724afc0fcf974e6d331e73ecac723107a102cf * ENH:add _A and _B for perform_with_groove Jira: STUDIO-5267 Change-Id: Iee3310dfa1cd8e6680310f0af0eff5c817490813 * ENH:is_equal for min_z and max_z Jira: STUDIO-5267 Change-Id: I9493883d8be9d44e26ddc9afe62b7e9eb09c5052 * ci: update build version to 01.08.00.59 Change-Id: Ie8ed29ccf5d6c94594eb2ab8b717416fbeace3bd * FIX:Image display unclear in light mode JIRA:5161 Change-Id: I134cc64a2af0dfff60c47d0ff09d78d9c0f86b3f * FIX:fix bugs of non manifold edge Jira: STUDIO-5267 Change-Id: I8ac9a2cf96da0bc07ee00b309e65611b92fd174d * ENH:nozzle type detection jira:[STUDIO-5246] Change-Id: Ic41a2161a0e41d23f56af93ad8ec34cc83ada0e3 * ENH: upadte P1S start gcode 1.turn on MC board fan by default on P1S jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: I5b2f7868e350942fb8b7baf7d429e22a0987184a (cherry picked from commit e866a575b6b7d9552f7412f84272f4b48dfc3961) * ENH: improve support style's tooltip jira: none Change-Id: I8ee858d7052f04ce7ea6b226a500c7d1bf8a482f (cherry picked from commit 665f31c4fcde22bd894cbb4a5fb160635947f2a4) * ENH: set layer range error to warning 1. If layer range exceeds maximum/minimum layer range in printer settings,pop up a window to warn jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: I0304ee790e557ecf967f355c171993d1f51b5057 * ENH: CLI: remove the warning of layer height JIRA: no jira Change-Id: Idaceee4f52611479fc3f4238d016d891b4dc8cd1 * FIX: the word search is not translated Jira: STUDIO-5224 The world search in the device panel is not translated. Signed-off-by: wenjie.guo <[email protected]> Change-Id: Ia3d651c2159a3aad94e10cd0a6da98848f53ee2a (cherry picked from commit 4a46a0a4750d82d49c9523f4b668a1a00c41ed83) * FIX: Bitmap will flash when sending printing task Jira: STUDIO-5278 Signed-off-by: wenjie.guo <[email protected]> Change-Id: Ib0c8710b8d5d6b98fad043c950f054aa35bea965 * ENH:display the euler angle of rotation plane Jira: STUDIO-5268 Change-Id: I6b7b431931d60f1a9a832908400417781798c472 * ci: update build version to 01.08.00.60 Change-Id: I1c15b5c6437554c43327cd6b537f7a5860dba5a0 * ENH:cancel EnterReturnsTrue for imgui in cut Jira: STUDIO-5269 Change-Id: I2832e1dccaf9755448debe7b2bd56426f90dfe0d * ci: update build version to 01.08.00.61 Change-Id: Ib03e664a20990322c788686550c491d0139d8237 * FIX: some translation problems jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: If9f2af53b4f0bfa9469e84bcba68cc182df4a473 * add: Ukrainian lang support for 1.8 * fix linux * fix some string and colors * fix linux build error 2 * fix .gitignore * FIX: calibration selected preset is null in some case jira: STUDIO-5258 Change-Id: Iee63593c5f833c5a43e3b1d1c9ddb82f8c69569a * FIX: create filament issue Jira: 5296 5297 5295 5302 5311 5276 5296 create filament: list has same printer 5297 create filament: filament combobox has blank options 5298 edit filament: delete last preset prompt users 5302 create filament: filament combox has cili preset 5311 create filament: printer name too long to can not show all 5276 edit filament: PLA Aero filament type filter issue add prusa vendor Revised copy Change-Id: I5dcc615ce0951b1a9953fa12283f6090f5069045 * FIX: some translation Change-Id: Icb8614a0af18f96d15f3b97c17e0f6f708296847 * FIX:cancel is_equal for slicing function Jira: STUDIO-5267 Change-Id: I66d759aa2c968f8a28a6a5d8378929754f2db689 * FIX:UI stuck due to pop-up window with wrong chamber temperature JIRA: 5304 Change-Id: I1a49a7219b7a6f5700243704c348724e7930ce1a * FIX: allow input '+' and hide edit preset btn Change-Id: I97aec7c3ac4cc8b9d6c535f0126aaa1926553d86 * ENH: handle printer direct close and not retry Change-Id: I5dd55f8085cf6383a8420ab41e614ea6ae210c78 Jira: STUDIO-5305 * ci: update build version to 01.08.00.62 Change-Id: I09716bf79354b503197c751272fd3171e0abc8fd * add: new translation to ukr for AirFlow and Prusa * add: Texture Plate name fix * add new feature to localization .de, fix .it (#2876) * FIX:add slice_facet_for_cut_mesh api for cut tool and modify section_vertices_map 's traverse Jira: STUDIO-5267 Change-Id: Ifc4b183a4e4c4fdb4f47742f14f70a1ed93fa056 Change-Id: I52bfaef8926ef967b78a6cb712a1731a1b528a24 * FIX: Make the front smaller for Czech in device panel Jira: STUDIO-5151 Signed-off-by: wenjie.guo <[email protected]> Change-Id: I315174b55f923da069854fb4fed8cf3937b82074 * FIX: there is no object can be jumped to in notification jira: new Change-Id: Ib81bf49236952ede24a2de126051572d63916e01 * FIX: add height range, modifier in Preview pane will crash jira: STUDIO-5340 1. fix crash at add height range, modifiers in Preview from objectList 2. fix an assert hit when slicing 3. fix an assert hit when enter AssembleView 4. forbidden popup menu by right-click objectList in Preview Change-Id: I444bc76b1a4307999b387e4f60386b2d272bd308 * FIX: Black spot in the sending printing task page Jira: STUDIO-5307 Signed-off-by: wenjie.guo <[email protected]> Change-Id: I3bd97c063ec5f0faf7d12047da39f60ce55cae4b * FIX: reset_cut_by_contours should update_buffer_data Jira: STUDIO-5376 Change-Id: I5aacb1f7b65822031d7138abd61a45b09c743531 * ENH:editing_window_width's value is small on the laptop Jira: STUDIO-5238 STUDIO-5265 Change-Id: Ia958772bcb081817da621115f99328bb62770cd5 * ENH: bumped version to 1.8.1 Change-Id: I9d25403daa5b7b8ca415c0b364670da9e0f932b0 * FIX: create filament dialog: create btn can not show all Jira: 5310 5331 Change-Id: I185272c90d9ff1c3d6b47abbefbf488d0d965cca * FIX:update custom_texture when new_shape=false Jira: STUDIO-5287 Change-Id: I3add95f9f9345c14a48cc7467513d1b3ce95f4c9 * ENH:editing_window_width's value is small on the laptop Jira: STUDIO-5238 Change-Id: I9044129f4e0c8ca7469db05b3e547fca4754342a * FIX:add slash_to_back_slash for saving file path Jira: STUDIO-5287 Change-Id: I9f3c176cd0831c793958f08601c63efac98176a4 * FIX: a button color didn't response to dark mode change jira: STUDIO-5315 Change-Id: I95489f01ccd1f77b9e95b0d0f69e5398d2e88487 * FIX: height range layers displayed in wrong position jira: STUDIO-5341 Change-Id: I83918b4624f367efa54321f1898e1176cdb04ea9 * FIX: auto arranging issues with locked plates 1. global auto arranging may put items overlap with wipe tower if some plates are locked jira: STUDIO-5329 2. items outside bed may overlap with plate boundary if it's rotated jira: STUDIO-5329 3. plate-wise auto arranging uses wrong min_obj_distance if the plate is by-layer printing but global setting is by-object printing jira: STUDIO-5330 Change-Id: I5dba2f1317e183c9aeec1cb2bd227fbddf4316e6 (cherry picked from commit db1eac41efff5f1e8d5ac0af74c6fc7ab59fc253) * FIX: a mistake in upward machine jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: Ibdb26c3d904634f322aef0dc0c7b8867d9fb5854 * FIX:a blank pop-up appears JIRA:XXXX Change-Id: Ice92b55204e4897fec024a6d99412eb810bddd4a * FIX:fixed failure in updating nozzle type jira:[STUDIO-5248] Change-Id: Iad37b5d5b76d37cb1723ef21d7c39b1e3fcaf8d7 * FIX:fixed issue with AI monitoring settings jira:[STUDIO-5082] Change-Id: I967fe3c1e9da61a55bcbfaa2a8e067dd5af18f72 * FIX:fixed issue with lan mode jira:[STUDIO-5189] Change-Id: I1d0a05f19dcea154cf3ef2b61ed0546d3581905e * FIX:update text for loading or unloading filaments jira:[STUDIO-5231] Change-Id: Ic7729c3ec012485b3d87e3d01f11e87502c67895 * FIX: Revert "ENH: do not leave a gap for top... Revert "ENH: do not leave a gap for top interface if the top z distance is 0" This reverts commit 79ea32c7cbbdb7e689637980af7c36caf42284c9. Revert reason: the supports are impossible to remove in some cases. jira: STUDIO-5385 Change-Id: I376a6f4dfd78da6dfea68b9ac3d552cddd0b4272 (cherry picked from commit 34e38b705fde7f5d7f9a3a89c96a3627ce0c998e) * ENH: improve normal support's quality 1. Add a base_interface_layer when using Supp.W 2. Fix a bug where base_angle and interface_angle are wong jira: STUDIO-5386 Change-Id: I52ab32c63b3cd1e6e2ba6463b01ae26699cf13d3 (cherry picked from commit 92ddd4a10b793572a1fa009da5b9e44fcdf81de2) * NEW:tracking stl model files jira:[STUDIO-5372] Change-Id: Idb1275b07441f0cd06c24588d5f7c20f81f1556c * FIX: edit filament dialog: preset name too long to del btn nan't show Jira: 5336 5174 and verify string normalization Change-Id: I380c3bed2bf43d01094b68979a8b67f4187c0b93 * FIX: some translation Jira: 5232 5300 5334 Change-Id: Ie474ca823011e81aab82a9809af3d6e42980496b * FIX: some translation Change-Id: Iaabe6087bed3b7d47d911cf4fb51c770804e72fb * ENH: change default tree_support_wall_count to 0 Now normal support also uses this option, so we can't default it to 1, otherwise normal supports will be too hard to remove. jira: none Change-Id: Ic5700af5c17e3a7b265c8915f28b0db35c6e06e6 (cherry picked from commit 6b84a9826da108b76569e686bd9def0b23ae29fd) * FIX:The name of the material in the error prompt is empty JIRA:STUDIO-4907 Change-Id: I3cf44f099256a51f21a44a89c89c000f734d1f36 * ci: update build version to 01.08.01.51 Change-Id: Ib20f5a12b65472102befec0a2adf82744fc29c46 * FIX: imgui textinput cannot paste on macos jira: STUDIO-5070、STUDIO-5365 Change-Id: Iea8f41e12744ecda0fbb95c1a8f2e014a7cdc384 * FIX: not cache printer file list on error Change-Id: I99843aedbf14d3d1d553ccac9b0bd26403274a82 Jira: none * FIX: thread of close BBLUserPresetExceedLimit notify Change-Id: I9698134ba1cc91fc83eac441f900d68c4c4b556a * ENH: Resolve non manifold edges by fixing model interfaces Jira: STUDIO-5124 Change-Id: I7ea86be44acb80b6c4762a76208b4a031acd0b27 * FIX:nozzle type sync jira:[STUDIO-5248] Change-Id: I63d48628832473d8d371ed643dc8528b00382531 * FIX: array bound happen in TriangleSelector::deserialize Jira: STUDIO-5170 Change-Id: I92b72a887845b462fad208f13607293b44d3d333 * FIX:cropping rendering without considering assembly views Jira: STUDIO-5260 Change-Id: Ia56cf80b305ae05f25f06ec277f85b3c5430a6df * FIX: PA for custom filament not available in BL Studio github: 2971 Change-Id: I6ccd36a183e7367d69557300f7242f5403f4bb33 * FIX: Bitmap is way too small on Mac Jira: STUDIO-5393 Signed-off-by: wenjie.guo <[email protected]> Change-Id: I6b550669fa8cd5fc9bfa6ed96d64d19a949f01b2 * FIX: move shutdown wait to OnExit Change-Id: I70d9a2bb686525ae5273aa9d63e25691da4ab65c Jira: STUDIO-2884 * FIX: calibration manage result dialog issue on macos jira: STUDIO-4949 STUDIO-5378 Change-Id: I00abefd45a0d274a4b68bb1ab18debe8f91d169e * FIX: adjust bed shape dialog button UI style fix that button text is hard to see in dark mode jira: STUDIO-5247 Change-Id: I2cf5b3cdd2eff9b821bdf5525bec4f329fc58dd1 * FIX: 5331 rescale btn Jira: STUDIO-5331 Change-Id: If153424b8480e64b166018e3cd98c17db557d0a8 Signed-off-by: maosheng.wei <[email protected]> * FIX: support do not generate jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: Ide9709d95203185538e280517f7aa6136beeda44 * FIX: remove not match printer config ota cache Change-Id: Ib73fc2ea31fa2186061cfcb5a170bc59b9db84ca Jira: none * FIX:cancel the variable of "checkbox_size" as a fixed value Jira: STUDIO-5150 Change-Id: I30d876d141b8b35ab4a3fee4889993d87b7c1741 * ENH:add reset_cut_by_contours in on_load function Jira:STUDIO-5269 m_connector_size_tolerance default value is 0.1f Change-Id: I6c67fff3cb0c1190e9141ed6f68fbfa848679f35 * ENH:cancel EnterReturnsTrue for imgui in cut Jira: STUDIO-5269 Change-Id: Ifc4b183a4e4c4fdb4f47742f14f70a1ed93fa056 Signed-off-by: zhou.xu <[email protected]> * FIX: dailytips should not change content frequently when slicing all jira: STUDIO-5234 Change-Id: Icb7e9c28404d9db8ebed58d937e13f89c5403b5c * FIX: objectList clone shortcut key issue jira: new Change-Id: Ia75bf58a7d53f962e1af6c2fd97497270b7eea84 * ENH:handling cases without msgs jira:[STUDIO-5401 STUDIO-5399] Change-Id: Iae651d5a19a45b0138a6aa621326a8b4a9649824 * ENH: optimize param description jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: Id0ca9224227a716b21fc0b8430722264dc319344 * ENH: add translation jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: I3b1f04fee3cd6322793794ad8b8707859f6c7d26 * FIX: close edit preset paramsDialog, mac unresponsive Jira: 5298 Change-Id: I021e00567354cfb1f2f5f1f2bf6ba1fc35b164c5 * ENH:disable AI monitoring on the p1p series Change-Id: I514bb1fb1ced6c03dd619230a9adac3be63f2de2 * ci: update build version to 01.08.01.52 Change-Id: I9f5e30d3fc4b7ef9321c522d3c18fce98f03742f * FIX: close edit preset paramsDialog, mac unresponsive Change-Id: Ic816754a20b7f6a5cdb46475750eb301fec3ad3a * FIX: organic support not work with raft only There is no raft generated when only raft enabled but no support needed. jira: none Change-Id: Ic0c9269e2f98038d85c9bc54e4a85f892dc5d764 * FIX: CLI: add object config when assemble JIRA: no jira Change-Id: I945f820fb58f2f643170b4b0b66742f6bbbdfd29 * FIX: delete preset prompt Jira: XXXX Change-Id: I6511c806c56393d4f6bd72d1c506da59675d49ff * FIX:Reorganize the assignment of variables of "m_editing_window_width" Jira: STUDIO-5238 Change-Id: If369916f3f5c21510f5f297bfd05c1230bdda7a4 * ENH: CLI: re-compute flush_volumes_matrix when it is missed Change-Id: Ie8f53c6bef003b1434de02ea14de5787b376484f * FIX: some translation for delete filament Change-Id: Ib46a8eba33f2e21016476aaab4a57a740e86b1b8 * FIX: scrolled window / del preset / edit filament issue Jira: 5092 GitHub: 1936 edit filament: just one preset, the scroll bar obscures the preset name edit filament: delete selected preset, click no, but preset be deleted from UI edit filament: serial sometimes displays incorrectly Change-Id: Ibc91609e252179de0c05ca065099756da6631165 * ci: update build version to 01.08.01.53 Change-Id: I5563a2c0812ab9a0d7727df27e17e681066ffa08 --------- Signed-off-by: maosheng.wei <[email protected]> Signed-off-by: xun.zhang <[email protected]> Signed-off-by: Kunlong Ma <[email protected]> Signed-off-by: wenjie.guo <[email protected]> Signed-off-by: qing.zhang <[email protected]> Signed-off-by: Stone Li <[email protected]> Signed-off-by: zhou.xu <[email protected]> Co-authored-by: zorro.zhang <[email protected]> Co-authored-by: liz.li <[email protected]> Co-authored-by: maosheng.wei <[email protected]> Co-authored-by: chunmao.guo <[email protected]> Co-authored-by: tao wang <[email protected]> Co-authored-by: Arthur <[email protected]> Co-authored-by: lane.wei <[email protected]> Co-authored-by: gerrit <[email protected]> Co-authored-by: xun.zhang <[email protected]> Co-authored-by: zhou.xu <[email protected]> Co-authored-by: hu.wang <[email protected]> Co-authored-by: Kunlong Ma <[email protected]> Co-authored-by: wenjie.guo <[email protected]> Co-authored-by: qing.zhang <[email protected]> Co-authored-by: zhimin.zeng <[email protected]> Co-authored-by: the Raz <[email protected]> Co-authored-by: Andy <[email protected]> Co-authored-by: Stone Li <[email protected]> Co-authored-by: enricoturri1966 <[email protected]> Co-authored-by: Dmytro Chystiakov <[email protected]> Co-authored-by: Heiko Liebscher <[email protected]> * Improve arc fitting when new overhang slowdown is used (#2942) * Set PointerAlignment to Left (#2948) A lot of the codebase that I have seen typically uses a left justified pointer character. This would update the formatter to also follow that. * Updated internal bridging flow change and reverted bridge PR (#2943) Updated internal bridging flow change & reverted bridge PR * Feature Merge: Fix for inner-outer-inner mode post BBS feature merge (#2949) Fix for inner-outer-inner mode post BBS feature merge * disable misleading 3mf version warning (cherry picked from commit b4b98053834be05a79363a4c6f80d927192c982e) * thick internal bridges (#2954) (cherry picked from commit f2f2ede5d5affe24576f9966e6db6ea31ae28101) * Improve PA calibration Line method so it works for bed origin not in (0,0) (cherry picked from commit f0522065d8162714c735205af71a35528cb621c8) * fix lang * Add a simple subtle outline effect by drawing back faces using wireframe mode (#2934) * Add a simple subtle outline effect by drawing back faces using wireframe mode * Show outline in white if the model color is too dark * Make the outline algorithm more reliable * Enable cull face, which fix render on Linux * Fix `disable_cullface` * Add option to disable emitting M73 gcode (#2114) (#2940) * Add zhop to PA pattern (#2952) The current PA pattern implementation does not lift the nozzle when moving. The way the pattern is drawn means that the nozzle is often dragged over already printed lines, which can pull the pattern off the bed, or damage the lines already drawn. As a result I often see failed prints with the PA pattern, or moderate damage to already drawn lines. This change adds a 1 layer hop between each move to eliminate nozzle drag. * Dev 1.9 - Fix Spelling Mistake on Create Printer dialog box (#2961) * Fix Spelling Mistake on Create Printer dialog box * Dev 1.9 - Regroup Advanced Quality Options * Revert "Dev 1.9 - Regroup Advanced Quality Options" This reverts commit 6ffae875f0b6fef156b61ffb237c0211396f58d9. * Fix precise wall for Arachne wall generator (#2966) Update WIKI for it * Update wxWidgets to v3.2.1 (#2905) * Upgrade wxWidgets to 3.2.1 Based on prusa3d/PrusaSlicer@9a7e024 Co-authored-by: tamasmeszaros <[email protected]> * Implement BitmapCache * update wxExtensions while keeping legacy items * update dc.DrawBitmap calls to use get_bitmap * Fix GetSize/Width/Height calls * update BitmapComboBox * fix ifndef in wxExtensions.hpp * update my todos to OcraftyoneTODO * Get to a compilable state Everything seems to be working (including the plater). I am not seeing any graphical issues * fix extruder color icons * fix crash on opening support tab * remove GetBmpSize method from DropDown.cpp * Update TextInput to use bitmap bundles * update a TODO after testing * fix the rendering of the icons on combobox * fix a few todos * fix WipeTowerDialog.cpp * Overhaul WipeTowerDialog Removed simple version of the dialog since BBS removed the functionality but left the code. Center the table (only seen when the table is smaller than the minimum size of the dialog) Fix issue where editing a value causes the m_min_flush_label to change colors slightly Fix an issue where changing a value or running an auto calc changes the disabled value from "-" to "0" * update a few todos * Update some todos * Show dropdown when editing is started * Update NanoSVG.cmake Update NanoSVG to work with PR #2780 * Dim the icon on ComboBox when disabled * solve ObjectDataViewModel todos leaving colPrint and colEditing cases alone as it does not seem to impact anything * Update names in wxExtensions -Rename msw_rescale to sys_color_changed -Replace GetBmpSize, GetBmpWidth, GetBmpHeight with renamed version (same name without "Bmp") Both of these changes were also made by PrusaSlicer. Original Commit: Prusa3D/PrusaSlicer@066b567 Co-authored-by: YuSanka <[email protected]> * update BitmapCache::from_svg disable finding bundle in the cache to match load_svg update to match values used in load_svg * Update ScalableButton change the signature and remove functions/vars pertaining to a default bmp fix TODOs in ScalableButton Original Commit: Prusa3D/PrusaSlicer@066b567 Co-authored-by: YuSanka <[email protected]> * fix up some more todos in wxExtensions * update ScalableBitmap to use bmp bundles use wxBitmapBundle by default add flag to use old scaled bitmap function (specifically to solve issue with advanced toggle) * attempt to fix macos deps build * fix ubuntu build * Revert "attempt to fix macos deps build" Mistakenly made change to wrong file This reverts commit d9c20b51216db1d409aeb0420d9d901000ad1b00. * update wxWidgets patch an attempt to fix macOS build * Remove duplicate variable from OrcaSlicer.cpp * Fix macOS build issue * Fix blank DataViewItem being added to objects list * Filament ComboBox editor updates -Add show drop down feature to ObjectTable -Call finish editing when ComboBox is closed in ObjectList * remove Apple specific declarations missed during refactor * delete old wxWidgets patch * fix ubuntu seg fault * include patch from #2926 * update patch to include wxWidgets/wxWidgets@991a74c * fix deps not compiling on Windows * update WipeTowerDialog relocates the recalculate button back to its previous position changes the wording of the tip message label add spacing below the matrix * finish patching wxWidgets from prusa3d/PrusaSlicer@f8477d1 and prusa3d/PrusaSlicer@066b567 Co-authored-by: YuSanka <[email protected]> * fix combobox crash * revert outside plate changes --------- Co-authored-by: tamasmeszaros <[email protected]> Co-authored-by: YuSanka <[email protected]> * fix an issue that image is not showen in precise wall wiki * create debug folder automatically * QOL: Dev 1.9 - Regroup Advanced Quality Options (#2962) * Dev 1.9 - Regroup Advanced Quality Options * Regroup Advanced Quality Options * Regroup advanced quality options and flow rate labels * Updates labels for consistency. Renamed Order of walls to Walls printing order. Updated walls printing order and print infill first tooltip * Another option spelling mistake * Another spelling mistake part 2 * Updated localisation files * Updated de localisation file post upstream merge to resolve conflicts * Fix merge error when transferring change to branch. * update locale file for one more message --------- Co-authored-by: SoftFever <[email protected]> * Revert "Add a simple subtle outline effect by drawing back faces using wireframe mode (#2934)" This reverts commit 0cee51341688996c278b1fa1fbe2af99b66e4fe9. * QoL: Make sidebar collapsible, resizable, movable, floatable and dockable (#2972) * Add sidebar docking * Fix sidebar initial size * Fix sidebar collapse * Hide floating sidebar when switch away from model view * Add option to reset window layout * Save & load window layout * Fix a small issue with gcode toggle * Properly save & restore sidebar state * Show collapse icon based on sidebar docking state * Adjust toolbar position based on docking position * Fix return toolbar position * Fix plate list position * Merge upstream BBL changes up to 5th Dec (01.08.01.57) & fix issues with 1.8 BBL merge (#2994) * FIX: mistake in filament vendor jira:[NEW] Signed-off-by: xun.zhang <[email protected]> Change-Id: I3af712e417379d8b98ae18feebffe465bfa1e72d * NEW:set customized materials for the A1 P1 series Change-Id: I9c34f62867c074bf9ebb315013e5e40526e0eac7 * FIX: the flow rate ratio crashes after load model for third party printer Jira: 5244 Change-Id: Idd829c9d99eeba9d180653ac8de4e51b9a0d6370 * FIX: The maximum value is not printed in PA line mode Jira: 5046 4951 Change-Id: Ic81f9a75ce7f088fe950fdde283ff5c942cd6e83 * ENH:add preset check for sending files Change-Id: Ia3313d281b5ce91e277b380498014ffdac5debd3 * FIX: locale loading user preset Change-Id: I88521e4b10cb802d9253eb79a6b78b3286f15a33 Jira: STUDIO-5436 * FIX: sync user preset notify crash on exit Change-Id: I88f5dbcbd487293ea847ea6092efb61744399541 Jira: STUDIO-5413 * ci: update build version to 01.08.01.56 Change-Id: Id7a9718d5f920da50d52fd2ef220acf5d3270d3c * GUI/Field: Fix crash in color picker init (#2220) wxButton->GetBitmap() may return an invalid wxBitmap. Guard against this. * FIX: custom filament preset display in cali history issue jira: new Change-Id: I4145450a231adff542ab1a7428b3479f4074e06a * FIX: meshboolean transform result issue jira: STUDIO-5425 Change-Id: If66fe909ce4458c1b3192e4fd8a3d758fe7c7eaa * FIX: fix combobox and delete btn in filament setting enabled Jira: XXXX Change-Id: I8b659bd77ceb97c8cea9d3e5e931f4ea50822721 * ci: update build version to 01.08.01.57 Change-Id: I7a6f5439863ca81275ae8b80f1b5cf0bb36c4c0f * Fix crashing of flow rate calibration post BS 1.8 merge * Revert Staggered Inner Seam logic from Prusa slicer that was overwritten by the BS1.8 update --------- Signed-off-by: xun.zhang <[email protected]> Co-authored-by: xun.zhang <[email protected]> Co-authored-by: hu.wang <[email protected]> Co-authored-by: zhimin.zeng <[email protected]> Co-authored-by: tao wang <[email protected]> Co-authored-by: chunmao.guo <[email protected]> Co-authored-by: gerrit <[email protected]> Co-authored-by: mia <[email protected]> Co-authored-by: liz.li <[email protected]> Co-authored-by: maosheng.wei <[email protected]> * set osx deployment target for openssl * Only regenerate bed triangles if actually changed (#3039) * Remove unused bed texture * Only regenerate bed triangles if actually changed * Various fix & improvements to collapse sidebar (#3044) * Fix sidebar collapse button color in dark mode * Make collapse button half the size * Add tooltip to sidebar collapse button * Don't trigger sidebar collapse hotkey twice * Fix sidebar disable on gcode-only mode * Fix build error with CGAL 5.6 with -std=gnu++17 on Fedora (#3045) Fix build with CGAL 5.6 Surface_mesh iterators no longer return references, so it's necessary to use const references or copies when iterating. * Fixed a bug that caused curled edge detection not to work as expected for left facing edges when using Arachne. Enabled fan speed control for curled overhangs (#3034) * Update malformation distance factors (curled edge detection) * Updated curled detection logic from latest prusa 2.7 release, including updated estimate_points_properties algorithm Updated curled detection logic from latest prusa 2.7 release, including updated estimate_points_properties algorithm * Curled distance expansion const introduction * Enable overhang fan speed logic for curled edges slow downs * Reverted erroneous change * Port Emboss & SVG gizmo from PrusaSlicer (#2819) * Rework UI jobs to make them more understandable and flexible. * Update Orca specific jobs * Fix progress issue * Fix dark mode and window radius * Update cereal version from 1.2.2 to 1.3.0 (cherry picked from commit prusa3d/PrusaSlicer@057232a2756dad131aba2b989e558bb1560eed93) * Initial port of Emboss gizmo * Bump up CGAL version to 5.4 (cherry picked from commit prusa3d/PrusaSlicer@1bf9dee3e7d36a66588bfccb7beda10add154b8a) * Fix text rotation * Fix test dragging * Add text gizmo to right click menu * Initial port of SVG gizmo * Fix text rotation * Fix Linux build * Fix "from surface" * Fix -90 rotation * Fix icon path * Fix loading font with non-ascii name * Fix storing non-utf8 font descriptor in 3mf file * Fix filtering with non-utf8 characters * Emboss: Use Orca style input dialog * Fix build on macOS * Fix tooltip color in light mode * InputText: fixed incorrect padding when FrameBorder > 0. (ocornut/imgui#4794, ocornut/imgui#3781) InputTextMultiline: fixed vertical tracking with large values of FramePadding.y. (ocornut/imgui#3781, ocornut/imgui#4794) (cherry picked from commit ocornut/imgui@072caa4a9068b93070567879afc5fbcbb772c5ae) (cherry picked from commit ocornut/imgui@bdd2a943150628fdc827c285eafaced6005a2f64) * SVG: Use Orca style input dialog * Fix job progress update * Fix crash when select editing text in preview screen * Use Orca checkbox style * Fix issue that toolbar icons are kept regenerated * Emboss: Fix text & icon alignment * SVG: Fix text & icon alignment * Emboss: fix toolbar icon mouse hover state * Add a simple subtle outline effect by drawing back faces using wireframe mode * Disable selection outlines * Show outline in white if the model color is too dark * Make the outline algorithm more reliable * Enable cull face, which fix render on Linux * Fix `disable_cullface` * Post merge fix * Optimize selection rendering * Fix scale gizmo * Emboss: Fix text rotation if base object is scaled * Fix volume synchronize * Fix emboss rotation * Emboss: Fix advance toggle * Fix text position after reopened the project * Make font style preview darker * Make font style preview selector height shorter --------- Co-authored-by: tamasmeszaros <[email protected]> Co-authored-by: ocornut <[email protected]> Co-authored-by: SoftFever <[email protected]> * Fix btt tft thumbnail regression (#3056) fix btt tft thumbnail regression * Updated PA test to address crash when default line width was zero (#3055) Updated PA test address "bug" #3043 * Fixed a regression issue that wrong accel was used for PA Line * fix * fix add_to_galaxyslicer_cmake_project * update user agent * fix galaxy * fix * fix deps * fix build * fix * Add ColPic encoding for thumbnails(;gimage/;simage) as metadata. This will enable showing preview images on QIDI/Elegoo machines * Fix a regression that thumbnails were not zoomed properly * fix exhaust fan * fix preset * fix printer * Fix #2662 - "Extra length on restart" setting is ignored when wipe is enabled (#3065) Fix #2662 * some fixes * icns * Fix * Adds rotate on stl import (#3116) * Adds rotate on stl import * Fixed comma placement * update location of rotate variables --------- Co-authored-by: SoftFever <[email protected]> * Improve ExtrusionLine::simplify, eliminating many very-short extrusion segments which led to blemishes in thin-wall models sliced with Arachne (#3014) Improve toolpath simplification to avoid blemishes when using Arachne on thin walls. Co-authored-by: SoftFever <[email protected]> * fix * Fix value passed to SPEED in air-filteration.md macro. (#3133) Fix value passed to SPEED The SPEED parameter of SET_FAN_SPEED needs to be between 0.0 and 1.0. Since the S param, which is between 0 and 255, was being passed as is to SPEED, it effectively resulted in the target fan running at 100% if any value > 0 was passed to M106. * Update M106 macro for auxiliary fan. fix is by @IntenseWiggling from PR #3133 * Fix checking is volume svg (#3129) (cherry picked from commit prusa3d/PrusaSlicer@f31d7f1d8c9b6d65295521bbbcbcd48c64879727) Co-authored-by: Filip Sykala - NTB T15p <[email protected]> * Updated wipe logic to respect retraction speed during wiping (#3094) * Wipe retraction adjusted based on available wipe distance and retraction speed * Wipe Improvements: Removed debug code, removed retract before wipe and made the respect retract speed an option. * Wipe improvements: Spelling & grammar * Revert "Wipe improvements: Spelling & grammar" This reverts commit c8f8612b3f3755945584f69fad43b94d767e07ae. * Revert "Wipe Improvements: Removed debug code, removed retract before wipe and made the respect retract speed an option." This reverts commit ba515ffb628d193484c860d8f142fce66be1b985. * Wipe improvements: Using retraction before wipe parameter to judge when to do excess retraction * Wipe Improvements: Floating point comparison check * Wipe Improvements: Refactoring the code * Wipe Improvements: Updated Wipe Distance tool tip * Wipe Improvements: Removed redundant code * Wipe Improvements: Use unscale_ * Do not limit the max window size (#2889) (#3142) * fix galaxy * Tweak dailytip: remove images/added a few new tips * color * Fix window maximize when task bar is on the left. (#3148) Partially revert fe80dc6 * Revert "Fix window maximize when task bar is on the left. (#3148)" This reverts commit 0f87fdb98b7d09bae4d7bec390b74162c8ecbc39. * Revert "Do not limit the max window size (#2889) (#3142)" This reverts commit fe80dc6ca6fb873fb847c165adc5578ee65a58b4. * Full re-write of spiral vase (#3091) * Practically full re-write of spiral vase - Adds transition out to prevent sharp edge at the top of spiral vase. - Adds XY interpolation - Adds option to turn XY interpolation on/off * - Increasing E to 5 decimal digits (I observed uneven flow with less than that) - Excluding all travel moves (I saw a bug where somehow we ended up with travel moves within the print so excluding all travel moves) * - max_xy_smoothing is now configurable, default is 200% of nozzle_diameter - fixed no-op travel moves in the middle of spiral that now show up as defects when Smooth Spiral is enabled! * - Avoiding namespace pollution - Fixing dist_XY == 0 bug --------- Co-authored-by: Andrew Boktor <[email protected]> Co-authored-by: SoftFever <[email protected]> * Fixed a regression that non spiral vase mode was broken. #3091 * object cancel support for Prusa/Marlin/RRF * fix pot * fix lang * fix de * fix * fix de * Move downloaded deps into DL_CACHE subfolder * Fix regression that shell is not rendered unless slice is completed (#3181) * Fix issue that `is_update_alpha` doesn't work * Fix regression that shell is not rendered unless slice is completed * Format * Turkish words were edited. (#3184) * Update OrcaSlicer_tr.po New English terms were translated into Turkish. * Update OrcaSlicer_tr.po * Turkish language sentences were added. * Turkish words were edited. * Turkish words were edited. * Turkish words were edited. * Turkish words were edited. * Turkish words were edited. * kor translation update (#3163) * Fix sidebar not shown when open 3mf file from command line arg (#3172) * Show sidebar when open file from cmd * Fix issue that sidebar collapse button is not enabled when load 3mf file with gcode * Fix unicode path for nanosvg (#3179) * fix lang * fix pwsh variable in CICD (#3188) * cp script * Feature/merge 1.8.2 (#3193) * FIX: user preset sync token Change-Id: Id2aa865b778ee9ac4cfddb68ceef0374507b519b Jira: none * FIX: Bitmap cache not take effect Change-Id: I972098fdbda0b4542c6c759a8f5e1f0f2a30852b Jira: STUDIO-4991 * NEW: Open HotModel Link With GetParam-From bambustudio JIRA: NO JIRA Change-Id: I4ac49bac5ee0c50988c76a38b00b7ba7dc3201f5 * NEW:AmsMaterialsSetting Support for user-preset JIRA: STUDIO-5135 Change-Id: If848047cd5dbd059d440de30989c505c361305a7 * FIX: upload custom root preset fail Change-Id: I621c8d542dd604b07cc5df63d97d7a31558d3aba Jira: none * FIX: show custom filament in AMS filament list Change-Id: I79b9f8f2f08db8c52bbed76f1ea133baff383c00 Jira: none * FIX: dailytips window and gcodeviwer legend window size issue reset to original logic of dailytips and legend window size jira: new Change-Id: Iacb016bb222ba3f87317cfbe1f2b003802d773a5 * ENH: add text translation jira: new Change-Id: I780cfb8a0a64d806b5e0a414b6598e3b7bdf52dc * FIX: Delete and search object outside the plate JIRA: 1. STUDIO-5132 Deleting object outside the plate will crash 2. STUDIO-5146 The search function cannot search for object outside the plate Signed-off-by: Kunlong Ma <[email protected]> Change-Id: I84cb3fe990a9c2a182e7434c262466a70545280e * FIX: [5149 5142 5141 5140 5136] create printer and filament issue Jira: 5149 5142 5141 5140 5136 5149 process preset name can not show all 5142 improt configs combobox not update 5141 disable modify filament_vendor 5140 disable input Bambu and Generic vendor 5136 preset list window adjust Change-Id: I111a23996146cc16cc7f533c8616d50223d34c40 Signed-off-by: maosheng.wei <[email protected]> * ci: update build version to 01.08.00.54 Change-Id: Ifd69c01a82f627a9c6cf4fe0d48a759563ee90e7 * FIX: print model from sdcard with p1p Change-Id: If85383ba762022ead3dd754ae02a08817b891114 Jira: none * FIX: dailytips text translation jira: STUDIO-2556 Change-Id: If44e503615b09ee1692f42ba1f998918ec5bd691 * FIX: clone shortcut key conflict with quit in macos jira: STUDIO-5166 Change-Id: I548f275bb68d3b0e6bb3cfad6fe93df09d507da3 * FIX:User preset material settings dependent on firmware JIRA: 5167 Change-Id: I82cf26848594b01155883ad0aa2e9ee77d371fb2 * ENH:update the description of nozzle detection Change-Id:…
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
OrcaSlicer Version
1.8.0rc2
OS version
Windows10
Additional system information
No response
Printer
Voron Trident
How to reproduce
1: G-code flavor: RepRapFirmware
2: G.code thumbnails: 400x400 (or what ever)
3: Format of G-code thumnails: QOI.
4: Slice and upload file.
Actual results
Thumbnails broken.
Expected results
Thumbnails wokring.
Project file & Debug log uploads
Retraction test.zip
debug_Tue_Nov_14_20_10_04_836.log.zip
Checklist of files to include
The text was updated successfully, but these errors were encountered: