Bump coverage from 4.5.4 to 5.1 in /python

[dependabot-preview]

Bumps coverage from 4.5.4 to 5.1.

Changelog

Sourced from coverage's changelog.

Version 5.1 --- 2020-04-12

• The JSON report now includes counts of covered and missing branches. Thanks, Salvatore Zagaria.
• On Python 3.8, try-finally-return reported wrong branch coverage with decorated async functions (issue 964). This is now fixed. Thanks, Kjell Braden.
• The ~coverage.Coverage.get_option and ~coverage.Coverage.set_option methods can now manipulate the [paths] configuration setting. Thanks to Bernát Gábor for the fix for issue 967.

Version 5.0.4 --- 2020-03-16

• If using the [run] relative_files setting, the XML report will use relative files in the <source> elements indicating the location of source code. Closes issue 948.
• The textual summary report could report missing lines with negative line numbers on PyPy3 7.1 (issue 943). This is now fixed.
• Windows wheels for Python 3.8 were incorrectly built, but are now fixed. (issue 949)
• Updated Python 3.9 support to 3.9a4.
• HTML reports couldn't be sorted if localStorage wasn't available. This is now fixed: sorting works even though the sorting setting isn't retained. (issue 944 and pull request 945). Thanks, Abdeali Kothari.

Version 5.0.3 --- 2020-01-12

• A performance improvement in 5.0.2 didn't work for test suites that changed directory before combining data, causing "Couldn't use data file: no such table: meta" errors (issue 916). This is now fixed.
• Coverage could fail to run your program with some form of "ModuleNotFound" or "ImportError" trying to import from the current directory. This would happen if coverage had been packaged into a zip file (for example, on Windows), or was found indirectly (for example, by pyenv-virtualenv). A number of different scenarios were described in issue 862 which is now fixed. Huge thanks to Agbonze O. Jeremiah for reporting it, and Alexander Waters and George-Cristian Bîrzan for protracted debugging sessions.
• Added the "premain" debug option.
• Added SQLite compile-time options to the "debug sys" output.

Version 5.0.2 --- 2020-01-05

• Programs that used multiprocessing and changed directories would fail under coverage. This is now fixed (issue 890). A side effect is that debug information about the config files read now shows absolute paths to the files.
• When running programs as modules (coverage run -m) with --source, some measured modules were imported before coverage starts. This resulted in unwanted warnings ("Already imported a file that will be measured") and a reduction in coverage totals (issue 909). This is now fixed.
• If no data was collected, an exception about "No data to report" could happen instead of a 0% report being created (issue 884). This is now fixed.
• The handling of source files with non-encodable file names has changed. Previously, if a file name could not be encoded as UTF-8, an error occurred, as described in issue 891. Now, those files will not be measured, since their data would not be recordable.
• A new warning ("dynamic-conflict") is issued if two mechanisms are trying to change the dynamic context. Closes issue 901.
• coverage run --debug=sys would fail with an AttributeError. This is now fixed (issue 907).

Version 5.0.1 --- 2019-12-22

• If a 4.x data file is the cause of a "file is not a database" error, then use a more specific error message, "Looks like a coverage 4.x data file, are you mixing versions of coverage?" Helps diagnose the problems described in issue 886.
• Measurement contexts and relative file names didn't work together, as reported in issue 899 and issue 900. This is now fixed, thanks to David Szotten.
• When using coverage run --concurrency=multiprocessing, all data files should be named with parallel-ready suffixes. 5.0 mistakenly named the main process' file with no suffix when using --append. This is now fixed, closing issue 880.
• Fixed a problem on Windows when the current directory is changed to a different drive (issue 895). Thanks, Olivier Grisel.
• Updated Python 3.9 support to 3.9a2.

Version 5.0 --- 2019-12-14

Nothing new beyond 5.0b2.

Version 5.0b2 --- 2019-12-08

... (truncated)

Commits

• b854e61 Remove a no-longer needed wheel pin
• dd11976 Prep for v5.1
• b79005b New JSON info should be reported on individual files also.
• b1194fb Merge pull request #966 from SZVector/json_dump_all_attributes
• 42344f3 Beef up the test for get_option(paths)
• fd43e35 Finish up #967. Thanks, Bernát Gábor
• 97997d2 Merge pull request #969 from gaborbernat/967
• f5eb5f2 Extending jsonreport.py to also include all branch attributes
• 1720459 One clarification
• b890a3d Make the questions heading so they can be linked to
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
• @dependabot badge me will comment on this PR with code to add a "Dependabot enabled" badge to your readme

Additionally, you can set the following in the .dependabot/config.yml file in this repo:

• Update frequency
• Out-of-range updates (receive only lockfile updates, if desired)
• Security updates (receive only security updates, if desired)

[seldondev]

Hi @dependabot-preview[bot]. Thanks for your PR.

I'm waiting for a SeldonIO member to verify that this patch is reasonable to test. If it is, they should reply with /ok-to-test on its own line. Until that is done, I will not automatically test new commits in this PR, but the usual testing commands by org members will still work. Regular contributors should join the org to skip this step.

Once the patch is verified, the new status will be reflected by the ok-to-test label.

I understand the commands that are listed here.

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.

[adriangonz]

/ok-to-test

[seldondev]

Tue Apr 14 16:34:29 UTC 2020
The logs for [lint] [2] will show after the pipeline context has finished.
https://github.com/SeldonIO/seldon-core/blob/gh-pages/jenkins-x/logs/SeldonIO/seldon-core/PR-1686/2.log

impatient try
jx get build logs SeldonIO/seldon-core/PR-1686 --build=2

[seldondev]

Tue Apr 14 16:35:11 UTC 2020
The logs for [pr-build] [1] will show after the pipeline context has finished.
https://github.com/SeldonIO/seldon-core/blob/gh-pages/jenkins-x/logs/SeldonIO/seldon-core/PR-1686/1.log

impatient try
jx get build logs SeldonIO/seldon-core/PR-1686 --build=1

[adriangonz]

@dependabot rebase

[adriangonz]

/retest

[seldondev]

Wed Apr 15 08:35:44 UTC 2020
The logs for [pr-build] [3] will show after the pipeline context has finished.
https://github.com/SeldonIO/seldon-core/blob/gh-pages/jenkins-x/logs/SeldonIO/seldon-core/PR-1686/3.log

impatient try
jx get build logs SeldonIO/seldon-core/PR-1686 --build=3

[seldondev]

Wed Apr 15 08:36:50 UTC 2020
The logs for [lint] [5] will show after the pipeline context has finished.
https://github.com/SeldonIO/seldon-core/blob/gh-pages/jenkins-x/logs/SeldonIO/seldon-core/PR-1686/5.log

impatient try
jx get build logs SeldonIO/seldon-core/PR-1686 --build=5

[seldondev]

Wed Apr 15 08:38:10 UTC 2020
The logs for [pr-build] [4] will show after the pipeline context has finished.
https://github.com/SeldonIO/seldon-core/blob/gh-pages/jenkins-x/logs/SeldonIO/seldon-core/PR-1686/4.log

impatient try
jx get build logs SeldonIO/seldon-core/PR-1686 --build=4

[seldondev]

Tue Apr 21 13:47:49 UTC 2020
The logs for [pr-build] [6] will show after the pipeline context has finished.
https://github.com/SeldonIO/seldon-core/blob/gh-pages/jenkins-x/logs/SeldonIO/seldon-core/PR-1686/6.log

impatient try
jx get build logs SeldonIO/seldon-core/PR-1686 --build=6

[seldondev]

Tue Apr 21 13:47:59 UTC 2020
The logs for [lint] [7] will show after the pipeline context has finished.
https://github.com/SeldonIO/seldon-core/blob/gh-pages/jenkins-x/logs/SeldonIO/seldon-core/PR-1686/7.log

impatient try
jx get build logs SeldonIO/seldon-core/PR-1686 --build=7

[adriangonz]

/approve

[seldondev]

[APPROVALNOTIFIER] This PR is APPROVED

This pull-request has been approved by: adriangonz

The full list of commands accepted by this bot can be found here.

The pull request process is described here

Needs approval from an approver in each of these files:

• OWNERS [adriangonz]

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment

[seldondev]

Wed Apr 22 10:12:37 UTC 2020
The logs for [lint] [9] will show after the pipeline context has finished.
https://github.com/SeldonIO/seldon-core/blob/gh-pages/jenkins-x/logs/SeldonIO/seldon-core/PR-1686/9.log

impatient try
jx get build logs SeldonIO/seldon-core/PR-1686 --build=9

[seldondev]

Wed Apr 22 10:12:55 UTC 2020
The logs for [pr-build] [8] will show after the pipeline context has finished.
https://github.com/SeldonIO/seldon-core/blob/gh-pages/jenkins-x/logs/SeldonIO/seldon-core/PR-1686/8.log

impatient try
jx get build logs SeldonIO/seldon-core/PR-1686 --build=8