Skip to content

ScottSturdivant/rpi_metar

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

About

Inspired by some DIY projects, this script allows you to quickly discern weather conditions by changing the colors of LEDs to reflect the current METAR information. You will need a Raspberry Pi, some WS281X LEDs, and the four letter designators of the airports you are interested in.

This code assumes you've connected to GPIO 18 (PWM0) and have added blacklist snd_bcm2835 to the /etc/modprobe.d/snd-blacklist.conf file.

Don't want to DIY it? This is the code that powers the Aviation Weather Maps products. Enjoy a premade product, or continue reading and happy tinkering!

Install

sudo su
apt install python3-venv python3-dev
python3 -m venv /opt/rpi_metar
source /opt/rpi_metar/bin/activate
pip install wheel
pip install rpi_metar

Configuration

You need to tell rpi_metar which LEDs correspond to which airports. You may do this by creating the /etc/rpi_metar.conf file. There must be an [airports] section where the airport codes are assigned to LEDs. For example:

[airports]
KDEN = 0
KBOS = 1

The LED indexes can be skipped and do not need to be continuous. If you don't have an LED associated with an airport, it does not need to be entered.

Airports may also be repeated at different indexes, though to enable this the keys must be unique:

# this displays KDEN at both 3 and 45
[airports]
KDEN1 = 3
KDEN2 = 45

The behavior of the program can be tweaked by including a settings section in the configuration file. These configuration values can be set:

Option Default Description
brightness 128 An integer (from 0 to 255) controlling the intensity of the LEDs appear. In a well lit room, 75 or 85 are recommended. In a bright room, try 128.
disable_gamma False A boolean that will allow you to disable the gamma correction. You may need this if using LEDs from different manufacturers / batches in a single run.
do_fade True A boolean controlling whether or not stations will fade into their new color during a transition. If False, they will just abruptly change colors.
lightning True A boolean that controls if thunderstorm conditions should be visually indicated. They will appear as short blinks of white before going back to the station's original color.
lightning_duration 1.0 A float controlling how long a station blinks white before returning to its original color.
max_wind 30 An integer that sets the threshold for max wind speed in knots. Any steady or gusting winds above this value will result in yellow blinking lights.
metar_refresh_rate 300 An integer that controls how frequently (in seconds) the METAR information is polled.
sources NOAA,NOAABackup,SkyVector The data sources to be used. A comma separated list of class names from the sources.py file. BOM is another source for Australian stations. IFIS is a source for New Zealand stations that requires further configuration.
wind True A boolean that controls if high wind speeds should be visually indicated. They will appear as short blinks of yellow before going back to the station's original color.
wind_duration 1.0 A float controlling how long a station blinks yellow before returning to its original color.
unknown_off True A boolean that controls whether or not stations that are not reporting data will just turn off. If set to False, after three attempts (during which time they appear as yellow), they will instead turn to orange.

For example, to reduce the brightness of the LEDs:

[settings]
brightness = 85

Another feature includes setting up a legend. These are a series of lights that will always display their assigned static color. Similar to setting up the airports by LED index, you can assign flight categories to LED indexes:

[legend]
VFR = 10
IFR = 11
LIFR = 12
MVFR = 13
WIND = 14
LIGHTNING = 15
UNKNOWN = 16
OFF = 17
MISSING = 18

For the IFIS data source, credentials are required for logging into the service. They may be provided thusly:

[ifis]
username = your_username
password = your_password

The colors of the LEDs themselves along with their association to flight categories / behaviors can also be modified. To adjust individual colors, a 3-int tuple can be provided in GRB format:

[colors]
GREEN = (250, 0, 0) # Overriding a default color value.
NAVY_BLUE = (22, 22, 22) # A new value, not overriding a default.

Then, if you wanted to associate these new color definitions to behaviors, you can do the following:

[flight_categories]
LIFR = NAVY_BLUE # LIFR will now show as (22, 22, 22)
IFR = (66, 66, 66) # You can also just provide a new 3-int tuple without having given it a name.

Though not explicitly listed in that flight_categories section, since VFR defaults to GREEN, it will now be displayed using our modified (250, 0, 0) parameters.

Autostart

Create the /etc/systemd/system/rpi_metar.service file with the following contents:

[Unit]
Description=METAR Display
Wants=network-online.target
After=network.target network-online.target

[Service]
ExecStart=/opt/rpi_metar/bin/rpi_metar
User=root
Group=root
Restart=always

[Install]
WantedBy=multi-user.target

Make systemd aware of the changes:

systemctl daemon-reload

Make sure it's set to run at boot:

systemctl enable rpi_metar

Start the service:

systemctl start rpi_metar

About

METAR LED Display for a Raspberry Pi

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages