New Code #97
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| name: Arduino | |
| # Here we tell GitHub to run the workflow when a commit | |
| # is pushed or a Pull Request is opened. | |
| on: [push, pull_request] | |
| # This is the list of jobs that will be run concurrently. | |
| # Since we use a build matrix, the actual number of jobs | |
| # started depends on how many configurations the matrix | |
| # will produce. | |
| jobs: | |
| # This is the name of the job - can be whatever. | |
| test-matrix: | |
| # Here we tell GitHub that the jobs must be determined | |
| # dynamically depending on a matrix configuration. | |
| strategy: | |
| matrix: | |
| # The matrix will produce one job for each configuration | |
| # parameter of type `arduino-platform`, in this case a | |
| # total of 2. | |
| arduino-platform: ["arduino:mbed_nano esp32:esp32"] | |
| # This is usually optional but we need to statically define the | |
| # FQBN of the boards we want to test for each platform. In the | |
| # future the CLI might automatically detect and download the core | |
| # needed to compile against a certain FQBN, at that point the | |
| # following `include` section will be useless. | |
| include: | |
| - arduino-platform: "arduino:mbed_nano" | |
| fqbn: "arduino:mbed_nano:nanorp2040connect" | |
| - arduino-platform: "esp32:esp32" | |
| fqbn: "esp32:esp32:esp32s3:JTAGAdapter=default,PSRAM=enabled,FlashMode=qio,FlashSize=4M,LoopCore=1,EventsCore=1,USBMode=hwcdc,CDCOnBoot=default,MSCOnBoot=default,DFUOnBoot=default,UploadMode=default,PartitionScheme=huge_app,CPUFreq=240,UploadSpeed=921600,DebugLevel=none,EraseFlash=none" | |
| # This is the platform GitHub will use to run our workflow, we | |
| # pick Windows for no particular reason. | |
| runs-on: windows-latest | |
| # This is the list of steps this job will run. | |
| steps: | |
| # First of all, we clone the repo using the `checkout` action. | |
| - name: Checkout | |
| uses: actions/checkout@v4 | |
| # We use the `arduino/setup-arduino-cli` action to install and | |
| # configure the Arduino CLI on the system. | |
| - name: Setup Arduino CLI | |
| uses: arduino/setup-arduino-cli@v1 | |
| # We then install the platform, which one will be determined | |
| # dynamically by the build matrix. | |
| - name: Install platform | |
| run: | | |
| arduino-cli core update-index | |
| arduino-cli core install ${{ matrix.arduino-platform }} | |
| # Finally, we compile the sketch, using the FQBN that was set | |
| # in the build matrix. | |
| - name: Compile MainBoard Sketch | |
| run: arduino-cli compile --fqbn ${{ matrix.fqbn }} ./Code/MainBoard_Pico/MainBoard_Pico.ino | |
| - name: Compile Display Sketch | |
| run: arduino-cli compile --fqbn ${{ matrix.fqbn }} ./Code/Display/Display.ino |