Venus OS Temperature Service

Fork from LHardwick Victron-Service

This is a service to publish temperature type data onto the DBus of VenusOs running on a Raspberry Pi device.
Note: Currently this will not display the CPU temperature on Venus GX, only on RPi.

Added Support to install this with Kevin Windrem's Venus OS Setup Helper (https://github.com/kwindrem/SetupHelper)

INSTALL INSTRUCTIONS

No Settings needed for 1 Wire (e.g. DS18B20) all you need is to install SetupHelper and configure a custom Package.

• Package name: VenusOS-TemperatureService

• GitHub user: Rikkert-RS

• GitHub Tag: latest

  Screenshots

  Add Custom Package

  

Enabled Features in this Setup:

• Raspberry Pi CPU temperature

• 1-Wire Support (Temperatures) Data Port GPIO 26 on RPi

  Please keep in mind that there can always be conflicts with the GPIO's. Depending on what hardware you have (CAN hat etc) The 1Wire GPIO Port can be adjusted in u-boot/config.txt after install

Can be activated but not tested (in dbus-i2c.py)

• i2c Sensors
• ADC Sensors

Tested on Rasberry 3+ with Venus OS 2.91

Own Services:

Note, only services of path type "Temperature" will be displayed on the console and VRM If you modify the service to pubish data as a path that is of a different type it will only be available via the DBus and will not appear on the console or VRM.

Hope this all works for you

Rikkert-RS