"Mercedes ME" custom component

MercedesME platform as a Custom Component for Home Assistant.

IMPORTANT:

• Please login once in the MercedesME IOS or Android app before you install this component. (For North America, the app name is Mercedes Me Connect)

• Tested Countries: AT, AU, BE, CA, CH, CN, DE, DK, ES, FI, FR, IN, IT, IR, NL, NO, NZ, PT, SE, TH, UK, US

• North America: For Cars 2019 or newer only

• Thailand, India: Please use region "Europe".

• China: support of China is in early stage

• Discussions, Feature Requests via HA-Community Forum

Installation

• First: This is not a Home Assistant Add-On. It's a custom component.
• There are two ways to install. First you can download the folder custom_component and copy it into your Home-Assistant config folder. Second option is to install HACS (Home Assistant Custom Component Store) and select "MercedesME 2020" from the Integrations catalog.
• How to install a custom component?
• How to install HACS?
• Restart HA after the installation
• Make sure that you refresh your browser window too
• Use the "Add Integration" in Home Assistant, Settings, Devices & Services and select "MercedesME 2020".
• Use your MB-login email address. Your will receive a 6-digit code via email (valid for 15min).

How to Prevent Account Blocking

To reduce the risk of your account being blocked, please follow these recommendations:

1. Create a separate MB user account for use with this component.
2. Invite the new user to the vehicle:
   The primary user of the vehicle can invite the new HA-MB account to access the vehicle. Up to six additional users can be invited to each vehicle.
3. Use each account in a single environment only:
   Use one account exclusively in HA or in the official MB tools, but never in both simultaneously.

Important Notes

• Certain features, such as geofencing data, are available only to the primary user.
• If geofencing is required in your HA environment, use the primary user account in HA and the secondary accounts in the official MB apps.

---

Optional configuration values

See Options dialog in the Integration under Home-Assistant/Configuration/Integration.

Excluded Cars: comma-separated list of VINs.
PIN: Security PIN to execute special services. Please use your MB mobile app to setup
Disable Capability Check: By default the component checks the capabilities of a car. Active this option to disable the capability check. (For North America)
Debug Save Messages: Enable this option to save all relevant received message into the messages folder of the component

Available components

Depends on your own car or purchased Mercedes Benz licenses.

Binary Sensors

• warningwashwater

• warningcoolantlevellow

• warningbrakefluid

• warningenginelight

  attributes:
  warningbrakefluid, warningwashwater, warningcoolantlevellow, warninglowbattery
  

• parkbrakestatus

  attributes:
  preWarningBrakeLiningWear
  

• theftsystemarmed

  attributes:
  carAlarmLastTime, carAlarmReason, collisionAlarmTimestamp, interiorSensor, interiorProtectionStatus, interiorMonitoringLastEvent, interiorMonitoringStatus, exteriorMonitoringLastEvent, exteriorMonitoringStatus, lastParkEvent, lastTheftWarning, lastTheftWarningReason, parkEventLevel, parkEventType, theftAlarmActive, towProtectionSensorStatus, towSensor,
  

• tirewarninglamp

  attributes:
  tireMarkerFrontRight, tireMarkerFrontLeft,tireMarkerRearLeft, tireMarkerRearRight, tirewarningsrdk, tirewarningsprw, tireTemperatureRearLeft, tireTemperatureFrontRight,
  tireTemperatureRearRight, tireTemperatureFrontLeft
  

• windowsClosed

  attributes:
  windowstatusrearleft, windowstatusrearright, windowstatusfrontright, windowstatusfrontleft
  

• remoteStartActive

  attributes:
  remoteStartTemperature
  

• engineState

• chargeFlapACStatus

• Preclimate Status (Preconditioning)

  attributes:
  precondState, precondActive, precondError, precondNow, precondNowError, precondDuration, precondatdeparture, precondAtDepartureDisable, precondSeatFrontLeft, precondSeatFrontRight, precondSeatRearLeft, precondSeatRearRight, temperature_points_frontLeft, temperature_points_frontRight, temperature_points_rearLeft, temperature_points_rearRight,
  
  

• wiperHealth

  attributes:
  wiperLifetimeExceeded [EXPERIMENTAL, user feedback wanted]
  

Device Tracker

attributes:
positionHeading

Locks

• lock

  PIN setup in MB App is required. If the pin is not set in the integration options then the lock asks for the PIN.

Sensors

• lock

  attributes:
  decklidstatus, doorStatusOverall, doorLockStatusOverall, doorlockstatusgas, doorlockstatusvehicle, doorlockstatusfrontleft,doorlockstatusfrontright, doorlockstatusrearright, doorlockstatusrearleft, doorlockstatusdecklid, doorstatusrearleft, doorstatusfrontright, doorstatusrearright, doorstatusfrontleft, rooftopstatus, sunroofstatus, engineHoodStatus
  

  Internal value: doorlockstatusvehicle

  Values: 0: vehicle unlocked 1: vehicle internal locked 2: vehicle external locked 3: vehicle selective unlocked

• Fuel Level (%)

  attributes:
  tankLevelAdBlue
  

• Geofencing Violation

  attributes:
  Last_event_zone
  

  Values: ENTER LEAVE

• odometer

  attributes:
  distanceReset, distanceStart, averageSpeedReset, averageSpeedStart, distanceZEReset, drivenTimeZEReset, drivenTimeReset, drivenTimeStart, ecoscoretotal, ecoscorefreewhl, ecoscorebonusrange, ecoscoreconst, ecoscoreaccel, gasconsumptionstart, gasconsumptionreset, gasTankRange, gasTankLevel, liquidconsumptionstart, liquidconsumptionreset, liquidRangeSkipIndication, rangeliquid, serviceintervaldays, tanklevelpercent, tankReserveLamp, batteryState, tankLevelAdBlue
  

• Oil Level (%)

• Range Electric

  attributes:
  chargingstatus, distanceElectricalReset, distanceElectricalStart, ecoElectricBatteryTemperature, endofchargetime, maxrange, selectedChargeProgram, precondActive [DEPRECATED], precondNow [DEPRECATED], precondDuration [DEPRECATED]
  
  

• Electric consumption start

• Electric consumption reset

• Charging power

• Starter Battery State

  Internal Name: starterBatteryState
  
  Values     Description_short     Description_long
  "0"        "green"               "Vehicle ok"
  "1"        "yellow"              "Battery partly charged"
  "2"        "red"                 "Vehicle not available"
  "3"        "serviceDisabled"     "Remote service disabled"
  "4"        "vehicleNotAvalable"  "Vehicle no longer available"
  

• tirepressureRearLeft

• tirepressureRearRight

• tirepressureFrontRight

• tirepressureFrontLeft

• State of Charge (soc)

  Internal Name: soc
  
  State of charge (SoC) is the level of charge of an electric battery relative to its capacity. The units of SoC are percentage points (0% = empty; 100% = full).
  
  attributes:
  maxSocLowerLimit, maxSoc
  
  

• Ignition state

  Internal Name: ignitionstate
  
  Values     Description_short     Description_long
  "0"        "lock"                "Ignition lock"
  "1"        "off"                 "Ignition off"
  "2"        "accessory"           "Ignition accessory"
  "4"        "on"                  "Ignition on"
  "5"        "start"               "Ignition start"
  

• Aux Heat Status

  Internal Name: auxheatstatus
  
  Values    Description
  "0"       inactive
  "1"       normal heating
  "2"       normal ventilation
  "3"       manual heating
  "4"       post heating
  "5"       post ventilation
  "6"       auto heating
  
  attributes:
  auxheattime1, auxheattime2, auxheattime3, auxheattimeselection, auxheatActive, auxheatwarnings, auxheattime2, temperature_points_frontLeft, temperature_points_frontRight
  
  

• Departure Time

  Internal Name: departuretime
  
  Planned departure time to initiate preclimate functions
  
  attributes:
  departureTimeWeekday
  
  

Diagnostic Sensors

Diagnostic sensors are hidden by default, check the devices page to see the current values

• Car

  attributes:
  full_update_messages_received, partital_update_messages_received, last_message_received, last_command_type, last_command_state, last_command_error_code, last_command_error_message
  

• RCP_Features

  Sensor shows true if extended configuration like interior lighting is available. This feature requires a reauthentication in case you used a version <0.6 before (We need some more permissions...). Shows False in case reauthentication has not happened or the feature is not available for your car.

  attributes:
  rcp_supported_settings (List of all remote configuration options, I'll implement them step by step as services or buttons)
  

Services

Some services require that the security PIN is created in your mobile Android/IOS app. Please store the pin to the options-dialog of the integration

• refresh_access_token: Refresh the API access token

• auxheat_start: Start the auxiliary heating of a car defined by a vin.

• auxheat_stop: Stop the auxiliary heating of a car defined by a vin.

• battery_max_soc_configure: Configure the maximum value for the state of charge of the HV battery of a car defined by a vin.

• doors_unlock: Unlock a car defined by a vin. PIN required.

• doors_lock: Lock a car defined by a vin.

• engine_start: Start the engine of a car defined by a vin. PIN required.

• engine_stop: Stop the engine of a car defined by a vin.

• preconditioning_configure_seats: Configure which seats should be preconditioned of a car defined by a vin.

• preheat_start: Start the preheating of a zero emission car defined by a vin.

• preheat_start_departure_time: Start the preheating of a zero emission car defined by a vin and the departure time in minutes since midnight

• preheat_stop: Stop the preheating of a zero emission car defined by a vin.

• send_route: Send a route to a car defined by a vin.

• sigpos_start: Start light signaling of a car defined by a vin.

• sunroof_open: Open the sunroof of a car defined by a vin. PIN required.

• sunroof_tilt: Tilt the sunroof of a car defined by a vin. PIN required.

• sunroof_close: Close the sunroof of a car defined by a vin.

• temperature_configure: Configure the target preconditioning/auxheat temperatures for zones in a car defined by a VIN.

• windows_open: Open the windows of a car defined by a vin. PIN required.

• windows_close: Close the windows of a car defined by a vin.

Switches

• AuxHeat - Start/Stop the auxiliary heating of the car

Logging

Set the logging to debug with the following settings in case of problems.

logger:
  default: warn
  logs:
    custom_components.mbapi2020: debug

Open Items

• Find some maintainers - I don't need/want to pay for the Mercedes subscription anymore.

Useful links

• Forum post

Custom Lovelace Card

Enhance your experience with this integration by using VEHICLE INFO CARD. This card is designed to work seamlessly with the integration, providing a beautiful and intuitive interface to display the data in your Home Assistant dashboard.

Key Features

• Seamless Integration: Automatically pulls in data from the integration.
• Customizable: Easily modify the card’s appearance to fit your theme.
• Interactive: Includes controls to interact with the data directly from your dashboard.
• Multilingual Support: The card includes various translations, making it accessible in multiple languages.

Check out the Custom Lovelace Card for more details and installation instructions.