peripheral samples package

中文页 | English

1. Introduction

This package contains some routines for the operation of peripheral devices.

1.1 Example description

File	Description
adc_vol_sample.c	Use ADC device to convert voltage data
hwtimer_sample.c	Use hardware timer timing
i2c_aht10_sample.c	Use i2c device to obtain aht10 temperature and humidity sensor data
iwdg_sample.c	Watchdog device usage example
led_blink_sample.c	Use pin device to control LED blinking
pin_beep_sample.c	Use pin device to control buzzer
pwm_led_sample.c	Use pwm device to control LED brightness
rtc_sample.c	Use rtc device to set year, month, day, hour, minute and second information
sd_sample.c	Block device SD card usage example
spi_w25q_sample.c	Use spi device to read W25Q ID
uart_sample.c	Send and receive data using serial device interrupt receiving and polling sending mode
uart_dma_sample.c	Use serial device DMA reception and polling transmission mode to send and receive data

1.2 License

The peripheral samples package complies with the Apache license v2.0, see the LICENSE file for details.

1.3 Dependency

Depend on the device driver provided by the device management module.

2. How to open the peripheral samples package

To use the peripheral samples package, you need to select it in the RT-Thread package manager. The specific path is as follows:

RT-Thread online packages
    miscellaneous packages --->
        samples: kernel and components samples --->
            a peripheral_samples package for rt-thread --->

Then let the RT-Thread package manager automatically update, or use the pkgs --update command to update the package to the BSP.

3. Use peripheral samples package

After opening the peripheral samples package, when the BSP is compiled, the relevant source code of the selected software package will be added to the BSP project for compilation.

4. Matters needing attention

Nothing.

5. Contact & Thanks

• Maintenance: misonyo
• Homepage: https://github.com/RT-Thread-packages/peripheral-sample