| layout |
|---|
default |
The aim of (denovo) transcriptome assembly is to accurately reconstruct the complete set of transcripts that are represented in the read data (in the absence of reference genome)
In contrast of genome assembly, (context: if we have an organism with C chromosomes our optimal (ideally) genome assembly would consist of C long contigs) transcrimptome assembly (optimal) wil vary consist of all posible transcript from all expressed genes. ie. alternatively spliced variants (isoforms).
Nevertheless there are several contributing factors than negatively affect the accuracy of the construction assembly process.
These factors include error in sequencing process (usually the batch effect is found here), incomplete coverage of transcripts (due to insuficient sequencing depth), real biological variability (ex. alternatively spliced variants) and algorithmic simplification.
Usualy the most highly expressed transcript do not neccessary constitute the longjest one and the majority of transcripts in a transcriptome assembly will normally have relatively low expression levels.
Once your assembly is complete, you'll want to know how 'good' it is, and you might want to compare the quality of the assembly to similar assemblies generated by alternative assemblers, or having run an assembly with different parameters.
Transrate is software for de-novo transcriptome assembly quality analysis. It examines your assembly in detail and compares it to experimental evidence such as the sequencing reads, reporting quality scores for contigs and assemblies. This allows you to choose between assemblers and parameters, filter out the bad contigs from an assembly, and help decide when to stop trying to improve the assembly.
Transrate relise on different type errors reporter experimentally:
Error type:
- Family collapse (gene AA, AB, and AC collapsed as a single hybrid contig...bases in read as a disagrement in their entropy)
- Chimeris (contig compuse from two disting transcripts (may or may not be related)...coverage is non uniform)
- Unsupported insertion (the new contig contain a fragment inserted along them, therefore pseudo-contig have not good aligned...no reads align to insertion)
- Incompletness (the contig lengh is small in comparison with the reads-gene where it came...read pairs align off end of contig)
- Fragmentation (A transcript result in a small diferent set of contig ...result in bridging reads pairs)
- Local misassembly (transcript assembly is in a wrong orientation afer k-mering...read pairs in wrong orientation ...These are detectable when both members of a read pair align to a single contig, but in a manner inconsistent with the sequencing protocol) <-- no detected in a non-strand mode setup
- Redundancy (A transcript result in a diferent set of contigs ... all reads assign to best contig)
Whinin your work directory lets make a new directory with name transrate and go in to start working in:
mkdir transrate && cd transrate Lets to use the command shell ln -s in order to make a symbolic link from the assembly with name Trinity.fasta:
ln -s ../trinity_out/Trinity.fasta .Then, concatenate in a unique dataset the left and right libraries for input in transrate; both data sets are necessary for transrating:
zcat ../trinity_out/*R1*P.qtrim.gz > R1.P.qtrim.fq &
zcat ../trinity_out/*R2*P.qtrim.gz > R2.P.qtrim.fq Now export the source from the transrate tool; and finally run transrate (considere to use the sbatch task manager in the cluster)
tool=/LUSTRE/bioinformatica_data/RNA/ricardo/bioinformatics/transrate-1.0.3-linux-x86_64/
export PATH=$tool:$PATHtransrate \
--assembly Trinity.fasta \
--left R1.P.qtrim.fq \
--right R2.P.qtrim.fq \
--threads 96 \
--output gcontigs 1> transrate.log &The transrate.log file include some statistics like:
[ INFO] 2018-03-02 00:41:37 : Calculating contig metrics...
[ INFO] 2018-03-02 00:41:56 : Contig metrics:
[ INFO] 2018-03-02 00:41:56 : -----------------------------------
[ INFO] 2018-03-02 00:41:56 : n seqs 147454
[ INFO] 2018-03-02 00:41:56 : smallest 201
[ INFO] 2018-03-02 00:41:56 : largest 10795
[ INFO] 2018-03-02 00:41:56 : n bases 108715008
[ INFO] 2018-03-02 00:41:56 : mean len 737.28
[ INFO] 2018-03-02 00:41:56 : n under 200 0
[ INFO] 2018-03-02 00:41:56 : n over 1k 33509
[ INFO] 2018-03-02 00:41:56 : n over 10k 1
[ INFO] 2018-03-02 00:41:56 : n with orf 40996
[ INFO] 2018-03-02 00:41:56 : mean orf percent 58.76
[ INFO] 2018-03-02 00:41:56 : n90 308
[ INFO] 2018-03-02 00:41:56 : n70 640
[ INFO] 2018-03-02 00:41:56 : n50 1121
[ INFO] 2018-03-02 00:41:56 : n30 1754
[ INFO] 2018-03-02 00:41:56 : n10 2818
[ INFO] 2018-03-02 00:41:56 : gc 0.39
[ INFO] 2018-03-02 00:41:56 : bases n 0
[ INFO] 2018-03-02 00:41:56 : proportion n 0.0
[ INFO] 2018-03-02 00:41:56 : Contig metrics done in 19 seconds
[ INFO] 2018-03-02 00:41:56 : Calculating read diagnostics...
[ INFO] 2018-03-02 01:00:20 : Read mapping metrics:
[ INFO] 2018-03-02 01:00:20 : -----------------------------------
[ INFO] 2018-03-02 01:00:20 : fragments 51394897
[ INFO] 2018-03-02 01:00:20 : fragments mapped 19860500
[ INFO] 2018-03-02 01:00:20 : p fragments mapped 0.39
[ INFO] 2018-03-02 01:00:20 : good mappings 17246823
[ INFO] 2018-03-02 01:00:20 : p good mapping 0.34
[ INFO] 2018-03-02 01:00:20 : bad mappings 2613677
[ INFO] 2018-03-02 01:00:20 : potential bridges 0
[ INFO] 2018-03-02 01:00:20 : bases uncovered 68043780
[ INFO] 2018-03-02 01:00:20 : p bases uncovered 0.63
[ INFO] 2018-03-02 01:00:20 : contigs uncovbase 124374
[ INFO] 2018-03-02 01:00:20 : p contigs uncovbase 0.84
[ INFO] 2018-03-02 01:00:20 : contigs uncovered 147454
[ INFO] 2018-03-02 01:00:20 : p contigs uncovered 1.0
[ INFO] 2018-03-02 01:00:20 : contigs lowcovered 147454
[ INFO] 2018-03-02 01:00:20 : p contigs lowcovered 1.0
[ INFO] 2018-03-02 01:00:20 : contigs segmented 15457
[ INFO] 2018-03-02 01:00:20 : p contigs segmented 0.1
[ INFO] 2018-03-02 01:00:20 : Read metrics done in 1103 seconds
[ INFO] 2018-03-02 01:00:20 : No reference provided, skipping comparative diagnostics
[ INFO] 2018-03-02 01:00:40 : TRANSRATE ASSEMBLY SCORE 0.0297
[ INFO] 2018-03-02 01:00:40 : -----------------------------------
[ INFO] 2018-03-02 01:00:40 : TRANSRATE OPTIMAL SCORE 0.123
[ INFO] 2018-03-02 01:00:40 : TRANSRATE OPTIMAL CUTOFF 0.2353
[ INFO] 2018-03-02 01:00:41 : good contigs 65516
[ INFO] 2018-03-02 01:00:41 : p good contigs 0.44
[ INFO] 2018-03-02 01:00:41 : Writing contig metrics for each contig to /LUSTRE/bioinformatica_data/genomica_funcional/rgomez/oyster-rawdata/gonada_all_sex_vs_hc/transrate/gcontigs/Trinity/contigs.csv
[ INFO] 2018-03-02 01:01:02 : Writing analysis results to assemblies.csv
The optimal cutoff from 0.2352 were calculated with transrate and used to keep good contigs assembled (from the total contigs 44% were considere as good). Try comparing results with the previous Assembly quality statistics which came from the same set of libraries. Are there some difference ?
lets start into R
contigs <- read.csv(".gcontigs/Trinity/contigs.csv", header=T)
contigs['group'] <- NA
contigs[which(contigs['score'] == 0.0297),'group'] <- 'Assembly Score'
contigs[which(contigs['score'] <= 0.123),'group'] <- 'Optimal Score'
contigs[which(contigs['score'] <=0.2353),'group'] <- 'Optimal Cutoff'
table(contigs$group)