boards: complete SD Card MTD definition for several bords #19914
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
gschorcht
added
Type: bug
benpicco
approved these changes
Sep 6, 2023
gschorcht
added
the
CI: ready for merge train 🚃
|
bors merge |
bors bot
added a commit
that referenced
this pull request
Sep 15, 2023
19914: boards: complete SD Card MTD definition for several bords r=benpicco a=gschorcht ### Contribution description This PR completes the MTD definition for the following boards: - `seeedstudio-gd32` - `sipeed-longan-nano` including `sipeed-longan-nano-tft` - `waveshare-nrf52840-eval-kit` - ESP32x boards that have an SPI SD Card interface and use `mtd_sdcard_default` ### Testing procedure Green CI ### Issues/PRs references#19465 Prerequisite for PR #19465 Co-authored-by: Gunar Schorcht <[email protected]>
|
Build failed: |
|
looks like a #include "mtd.h"is missing |
gschorcht
force-pushed
the
boards/complete_sdcard_mtd_definition
branch
from
9ff159b
to
f4c23e8
Compare
I squashed it directly. |
|
bors merge |
bors bot
added a commit
that referenced
this pull request
Sep 20, 2023
19914: boards: complete SD Card MTD definition for several bords r=benpicco a=gschorcht ### Contribution description This PR completes the MTD definition for the following boards: - `seeedstudio-gd32` - `sipeed-longan-nano` including `sipeed-longan-nano-tft` - `waveshare-nrf52840-eval-kit` - ESP32x boards that have an SPI SD Card interface and use `mtd_sdcard_default` ### Testing procedure Green CI ### Issues/PRs references#19465 Prerequisite for PR #19465 19915: drivers/lcd: support MCU 8080 8-bit parallel mode r=benpicco a=gschorcht ### Contribution description LCD driver ICs usually support - SPI serial mode, - MCU 8080 8-bit parallel mode and - MCU 8080 16-bit parallel mode. This PR extends the LCD display driver API to support the MCU 8080 8-/16-bit parallel modes and implements a GPIO-driven MCU 8080 8-bit parallel mode. The following features are already working locally and will be provided as follow-on PRs for which this PR is a prerequisite. - GPIO-driven bit-banging implementation of the 16-bit mode of the MCU 8080 parallel interface - Enabling the display on `stm32f723e-disco` and `stm32l496g-disco` using the feature above - Definition of a low-level API for the parallel modes using the LCD controller of the MCU - Using FMC for the display on `stm32f723e-disco` and `stm32l496g-disco` - Using LCD controller for the display of `esp32-wt32-sc01-plus` (PR #19917) ### Testing procedure The PR can be tested with PR #19917 on top of this PR. ``` BOARD=esp32s3-wt32-sc01-plus make -j8 -C tests/drivers/st77xx flash ``` The following video shows the test. **Please note** The test is pretty slow because the display has 480 x 320 pixels and the MCU 8080 8-bit parallel interface is realized by a GPIO-driven bit-banging implementation where each GPIO of the data bus is set separately. A follow-up PR will use the ESP32-S3 LCD controller and DMA for this board. This PR just defines the extension of the driver by the parallel interface and provides the bit-banging implementation for MCUs that don't have a LCD controller on chip. https://github.com/RIOT-OS/RIOT/assets/31932013/c1e3e3d7-05d9-4ca5-8fff-9a5eaca50fba ### Issues/PRs references 19919: drivers/st77xx: introduce rotation defines r=benpicco a=gschorcht ### Contribution description The PR introduces counterclockwise rotations for the definition of parameter `ST77XX_PARAM_ROTATION`. It is more intuitive and universal to use `ST77XX_ROTATION_{0,90,180,270}` instead of `ST77XX_ROTATION_{ST77XX_ROTATION_{VERT,VERT_FLIP,HORZ,HORZ_FLIP}`, especially because the orientation of the display may vary with respect to the orientation of the board. ### Testing procedure `tests/drivers/st77xx` should still work, for example: ``` BOARD=adafruit-pybadge make -C tests/drivers/st77xx flash ``` ``` BOARD=esp32s3-usb-otg make -j8 -C tests/drivers/st77xx flash ``` ### Issues/PRs references 19931: boards: fix documentation for GD32V boards and doxygen 1.9.4 r=benpicco a=gschorcht ### Contribution description This PR fixes some small problems in documentation of `sipeed-longan-nano`, `sipeed-longan-nano-tft` and `seeedstudio-gd32` for doxygen 1.9.4 that is used on `doc.riot-os.org`. Doxygen version 1.9.4 doesn't like anymore - single double quotes as symbol for the inches unit in the text - line breaks in `[]()` to avoid exhausting the 100 characters per line. See https://doc.riot-os.org/group__boards__sipeed__longan__nano.html for example. Doxygen 1.9.1 which is part of `riot-docker` container didn't have theses problems 😟 ### Testing procedure Documentation should be fixed. ### Issues/PRs references 19935: boards/nucleo64: fix SPI Arduino mapping for most boards r=benpicco a=maribu ### Contribution description Before, the Arduino SPI mapping for all Nucleo-64 boards was incorrect. With this, the situation improves to the following: - [x] nucleo-f030r8 - [ ] nucleo-f070rb - No SPI buses provided. - [x] nucleo-f072rb - [x] nucleo-f091rc - [x] nucleo-f103rb - [ ] nucleo-f302r8 - No SPI bus at D11, D12, D13 provided - [x] nucleo-f303re - [x] nucleo-f334r8 - [x] nucleo-f401re - [x] nucleo-f410rb - [x] nucleo-f411re - [x] nucleo-f446re - [x] nucleo-g070rb - [x] nucleo-g071rb - [x] nucleo-g431rb - [x] nucleo-g474re - [x] nucleo-l053r8 - [x] nucleo-l073rz - [x] nucleo-l152re - No SPI bus at D11, D12, D13 provided - [x] nucleo-l452re - [x] nucleo-l476rg - [x] nucleo-wl55jc The remaining offenders still need to be fixed, but that is better done one PR at a time. ### Testing procedure - Check if the SPI device provided in the given `boards/<BOARD_NAME>/incude/periph_conf.h` is indeed `SPI_DEV(0)`, or in `periph_conf.h` the correct SPI dev is found - this should be fine for all boards above, except for the unchecked ones or: - run #19932: The SPI test should pass now ### Issues/PRs references Bug found in #19932 (comment) Co-authored-by: Gunar Schorcht <[email protected]> Co-authored-by: Marian Buschsieweke <[email protected]>
|
Build failed (retrying...): |
bors bot
added a commit
that referenced
this pull request
Sep 20, 2023
19914: boards: complete SD Card MTD definition for several bords r=benpicco a=gschorcht ### Contribution description This PR completes the MTD definition for the following boards: - `seeedstudio-gd32` - `sipeed-longan-nano` including `sipeed-longan-nano-tft` - `waveshare-nrf52840-eval-kit` - ESP32x boards that have an SPI SD Card interface and use `mtd_sdcard_default` ### Testing procedure Green CI ### Issues/PRs references#19465 Prerequisite for PR #19465 19915: drivers/lcd: support MCU 8080 8-bit parallel mode r=benpicco a=gschorcht ### Contribution description LCD driver ICs usually support - SPI serial mode, - MCU 8080 8-bit parallel mode and - MCU 8080 16-bit parallel mode. This PR extends the LCD display driver API to support the MCU 8080 8-/16-bit parallel modes and implements a GPIO-driven MCU 8080 8-bit parallel mode. The following features are already working locally and will be provided as follow-on PRs for which this PR is a prerequisite. - GPIO-driven bit-banging implementation of the 16-bit mode of the MCU 8080 parallel interface - Enabling the display on `stm32f723e-disco` and `stm32l496g-disco` using the feature above - Definition of a low-level API for the parallel modes using the LCD controller of the MCU - Using FMC for the display on `stm32f723e-disco` and `stm32l496g-disco` - Using LCD controller for the display of `esp32-wt32-sc01-plus` (PR #19917) ### Testing procedure The PR can be tested with PR #19917 on top of this PR. ``` BOARD=esp32s3-wt32-sc01-plus make -j8 -C tests/drivers/st77xx flash ``` The following video shows the test. **Please note** The test is pretty slow because the display has 480 x 320 pixels and the MCU 8080 8-bit parallel interface is realized by a GPIO-driven bit-banging implementation where each GPIO of the data bus is set separately. A follow-up PR will use the ESP32-S3 LCD controller and DMA for this board. This PR just defines the extension of the driver by the parallel interface and provides the bit-banging implementation for MCUs that don't have a LCD controller on chip. https://github.com/RIOT-OS/RIOT/assets/31932013/c1e3e3d7-05d9-4ca5-8fff-9a5eaca50fba ### Issues/PRs references Co-authored-by: Gunar Schorcht <[email protected]>
benpicco
reviewed
Sep 20, 2023
|
Canceled. |
gschorcht
force-pushed
the
boards/complete_sdcard_mtd_definition
branch
from
f4c23e8
to
bf981c8
Compare
|
I have hopefully added the include to all boards now (squashed directly). It is a pity that normal CI compilation does not catch such compilation errors and stops at the first error. |
There is the |
|
bors merge |
|
Build succeeded! The publicly hosted instance of bors-ng is deprecated and will go away soon. If you want to self-host your own instance, instructions are here. If you want to switch to GitHub's built-in merge queue, visit their help page. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Contribution description
This PR completes the MTD definition for the following boards:
seeedstudio-gd32sipeed-longan-nanoincludingsipeed-longan-nano-tftwaveshare-nrf52840-eval-kitmtd_sdcard_defaultTesting procedure
Green CI
Issues/PRs references#19465
Prerequisite for PR #19465