🚸 ProUI APRIL2022 updates (MarlinFirmware#24084)

Marlin/src/MarlinCore.cpp

@@ -883,7 +883,7 @@ void kill(FSTR_P const lcd_error/*=nullptr*/, FSTR_P const lcd_component/*=nullp
   // Echo the LCD message to serial for extra context
   if (lcd_error) { SERIAL_ECHO_START(); SERIAL_ECHOLNF(lcd_error); }
 
-  #if EITHER(HAS_DISPLAY, DWIN_LCD_PROUI)
+  #if HAS_DISPLAY
     ui.kill_screen(lcd_error ?: GET_TEXT_F(MSG_KILLED), lcd_component ?: FPSTR(NUL_STR));
   #else
     UNUSED(lcd_error); UNUSED(lcd_component);

Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp

@@ -727,6 +727,7 @@ void unified_bed_leveling::shift_mesh_height() {
 
     TERN_(HAS_MARLINUI_MENU, ui.capture());
     TERN_(EXTENSIBLE_UI, ExtUI::onLevelingStart());
+    TERN_(DWIN_LCD_PROUI, DWIN_LevelingStart());
 
     save_ubl_active_state_and_disable();  // No bed level correction so only raw data is obtained
     uint8_t count = GRID_MAX_POINTS;
@@ -790,6 +791,7 @@ void unified_bed_leveling::shift_mesh_height() {
     );
 
     TERN_(EXTENSIBLE_UI, ExtUI::onLevelingDone());
+    TERN_(DWIN_LCD_PROUI, DWIN_LevelingDone());
   }
 
 #endif // HAS_BED_PROBE

Marlin/src/gcode/probe/G30.cpp

@@ -33,6 +33,10 @@
   #include "../../feature/probe_temp_comp.h"
 #endif
 
+#if ENABLED(DWIN_LCD_PROUI)
+  #include "../../lcd/marlinui.h"
+#endif
+
 /**
  * G30: Do a single Z probe at the current XY
  *
@@ -48,20 +52,38 @@ void GcodeSuite::G30() {
   const xy_pos_t pos = { parser.linearval('X', current_position.x + probe.offset_xy.x),
                          parser.linearval('Y', current_position.y + probe.offset_xy.y) };
 
-  if (!probe.can_reach(pos)) return;
+  if (!probe.can_reach(pos)) {
+    #if ENABLED(DWIN_LCD_PROUI)
+      SERIAL_ECHOLNF(GET_EN_TEXT_F(MSG_ZPROBE_OUT));
+      LCD_MESSAGE(MSG_ZPROBE_OUT);
+    #endif
+    return;
+  }
 
   // Disable leveling so the planner won't mess with us
   TERN_(HAS_LEVELING, set_bed_leveling_enabled(false));
 
   remember_feedrate_scaling_off();
 
+  TERN_(DWIN_LCD_PROUI, process_subcommands_now(F("G28O")));
+
   const ProbePtRaise raise_after = parser.boolval('E', true) ? PROBE_PT_STOW : PROBE_PT_NONE;
 
   TERN_(HAS_PTC, ptc.set_enabled(!parser.seen('C') || parser.value_bool()));
   const float measured_z = probe.probe_at_point(pos, raise_after, 1);
   TERN_(HAS_PTC, ptc.set_enabled(true));
-  if (!isnan(measured_z))
+  if (!isnan(measured_z)) {
     SERIAL_ECHOLNPGM("Bed X: ", pos.x, " Y: ", pos.y, " Z: ", measured_z);
+    #if ENABLED(DWIN_LCD_PROUI)
+      char msg[31], str_1[6], str_2[6], str_3[6];
+      sprintf_P(msg, PSTR("X:%s, Y:%s, Z:%s"),
+        dtostrf(pos.x, 1, 1, str_1),
+        dtostrf(pos.y, 1, 1, str_2),
+        dtostrf(measured_z, 1, 2, str_3)
+      );
+      ui.set_status(msg);
+    #endif
+  }
 
   restore_feedrate_and_scaling();
 

Marlin/src/gcode/stats/M31.cpp

@@ -33,7 +33,7 @@ void GcodeSuite::M31() {
   char buffer[22];
   duration_t(print_job_timer.duration()).toString(buffer);
 
-  ui.set_status(buffer);
+  ui.set_status(buffer, ENABLED(DWIN_LCD_PROUI));
 
   SERIAL_ECHO_MSG("Print time: ", buffer);
 }

Marlin/src/lcd/e3v2/common/dwin_api.cpp

@@ -234,7 +234,9 @@ void DWIN_Frame_AreaMove(uint8_t mode, uint8_t dir, uint16_t dis,
 //  *string: The string
 //  rlimit: To limit the drawn string length
 void DWIN_Draw_String(bool bShow, uint8_t size, uint16_t color, uint16_t bColor, uint16_t x, uint16_t y, const char * const string, uint16_t rlimit/*=0xFFFF*/) {
-  DWIN_Draw_Rectangle(1, bColor, x, y, x + (fontWidth(size) * strlen_P(string)), y + fontHeight(size));
+  #if DISABLED(DWIN_LCD_PROUI)
+    DWIN_Draw_Rectangle(1, bColor, x, y, x + (fontWidth(size) * strlen_P(string)), y + fontHeight(size));
+  #endif
   constexpr uint8_t widthAdjust = 0;
   size_t i = 0;
   DWIN_Byte(i, 0x11);

Marlin/src/lcd/e3v2/creality/dwin.cpp

@@ -2728,7 +2728,7 @@ void HMI_Prepare() {
             EncoderRate.enabled = true;
           #else
             // Apply workspace offset, making the current position 0,0,0
-            queue.inject(F("G92 X0 Y0 Z0"));
+            queue.inject(F("G92X0Y0Z0"));
             HMI_AudioFeedback();
           #endif
           break;
@@ -3556,9 +3556,9 @@ void HMI_AdvSet() {
         case ADVSET_CASE_HOMEOFF:
           checkkey = HomeOff;
           select_item.reset();
-          HMI_ValueStruct.Home_OffX_scaled = home_offset[X_AXIS] * 10;
-          HMI_ValueStruct.Home_OffY_scaled = home_offset[Y_AXIS] * 10;
-          HMI_ValueStruct.Home_OffZ_scaled = home_offset[Z_AXIS] * 10;
+          HMI_ValueStruct.Home_OffX_scaled = home_offset.x * 10;
+          HMI_ValueStruct.Home_OffY_scaled = home_offset.y * 10;
+          HMI_ValueStruct.Home_OffZ_scaled = home_offset.z * 10;
           Draw_HomeOff_Menu();
           break;
       #endif
@@ -3806,7 +3806,7 @@ void HMI_Tune() {
             EncoderRate.enabled = true;
           #else
             // Apply workspace offset, making the current position 0,0,0
-            queue.inject(F("G92 X0 Y0 Z0"));
+            queue.inject(F("G92X0Y0Z0"));
             HMI_AudioFeedback();
           #endif
         break;

Marlin/src/lcd/e3v2/jyersui/dwin.cpp

@@ -1246,7 +1246,7 @@ void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/
           if (draw)
             Draw_Menu_Item(row, ICON_SetHome, F("Set Home Position"));
           else {
-            gcode.process_subcommands_now(F("G92 X0 Y0 Z0"));
+            gcode.process_subcommands_now(F("G92X0Y0Z0"));
             AudioFeedback();
           }
           break;