Merge pull request torvalds#194 from zandrey/5.4.x+fslc

Update 5.4.x+fslc to v5.4.84

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 4
-SUBLEVEL = 83
+SUBLEVEL = 84
 EXTRAVERSION =
 NAME = Kleptomaniac Octopus
 
@@ -802,8 +802,11 @@ DEBUG_CFLAGS	+= -gsplit-dwarf
 else
 DEBUG_CFLAGS	+= -g
 endif
+ifneq ($(LLVM_IAS),1)
 KBUILD_AFLAGS	+= -Wa,-gdwarf-2
 endif
+endif
+
 ifdef CONFIG_DEBUG_INFO_DWARF4
 DEBUG_CFLAGS	+= -gdwarf-4
 endif

arch/arc/kernel/stacktrace.c

@@ -38,15 +38,15 @@
 
 #ifdef CONFIG_ARC_DW2_UNWIND
 
-static void seed_unwind_frame_info(struct task_struct *tsk,
-				   struct pt_regs *regs,
-				   struct unwind_frame_info *frame_info)
+static int
+seed_unwind_frame_info(struct task_struct *tsk, struct pt_regs *regs,
+		       struct unwind_frame_info *frame_info)
 {
 	/*
 	 * synchronous unwinding (e.g. dump_stack)
 	 *  - uses current values of SP and friends
 	 */
-	if (tsk == NULL && regs == NULL) {
+	if (regs == NULL && (tsk == NULL || tsk == current)) {
 		unsigned long fp, sp, blink, ret;
 		frame_info->task = current;
 
@@ -65,11 +65,15 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
 		frame_info->call_frame = 0;
 	} else if (regs == NULL) {
 		/*
-		 * Asynchronous unwinding of sleeping task
-		 *  - Gets SP etc from task's pt_regs (saved bottom of kernel
-		 *    mode stack of task)
+		 * Asynchronous unwinding of a likely sleeping task
+		 *  - first ensure it is actually sleeping
+		 *  - if so, it will be in __switch_to, kernel mode SP of task
+		 *    is safe-kept and BLINK at a well known location in there
 		 */
 
+		if (tsk->state == TASK_RUNNING)
+			return -1;
+
 		frame_info->task = tsk;
 
 		frame_info->regs.r27 = TSK_K_FP(tsk);
@@ -103,6 +107,8 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
 		frame_info->regs.r63 = regs->ret;
 		frame_info->call_frame = 0;
 	}
+
+	return 0;
 }
 
 #endif
@@ -116,7 +122,8 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
 	unsigned int address;
 	struct unwind_frame_info frame_info;
 
-	seed_unwind_frame_info(tsk, regs, &frame_info);
+	if (seed_unwind_frame_info(tsk, regs, &frame_info))
+		return 0;
 
 	while (1) {
 		address = UNW_PC(&frame_info);

arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi

@@ -5,20 +5,20 @@
 	usb {
 		compatible = "simple-bus";
 		dma-ranges;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x0 0x68500000 0x00400000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x68500000 0x0 0x00400000>;
 
 		usbphy0: usb-phy@0 {
 			compatible = "brcm,sr-usb-combo-phy";
-			reg = <0x00000000 0x100>;
+			reg = <0x0 0x00000000 0x0 0x100>;
 			#phy-cells = <1>;
 			status = "disabled";
 		};
 
 		xhci0: usb@1000 {
 			compatible = "generic-xhci";
-			reg = <0x00001000 0x1000>;
+			reg = <0x0 0x00001000 0x0 0x1000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usbphy0 1>, <&usbphy0 0>;
 			phy-names = "phy0", "phy1";
@@ -28,7 +28,7 @@
 
 		bdc0: usb@2000 {
 			compatible = "brcm,bdc-v0.16";
-			reg = <0x00002000 0x1000>;
+			reg = <0x0 0x00002000 0x0 0x1000>;
 			interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usbphy0 0>, <&usbphy0 1>;
 			phy-names = "phy0", "phy1";
@@ -38,21 +38,21 @@
 
 		usbphy1: usb-phy@10000 {
 			compatible = "brcm,sr-usb-combo-phy";
-			reg = <0x00010000 0x100>;
+			reg = <0x0 0x00010000 0x0 0x100>;
 			#phy-cells = <1>;
 			status = "disabled";
 		};
 
 		usbphy2: usb-phy@20000 {
 			compatible = "brcm,sr-usb-hs-phy";
-			reg = <0x00020000 0x100>;
+			reg = <0x0 0x00020000 0x0 0x100>;
 			#phy-cells = <0>;
 			status = "disabled";
 		};
 
 		xhci1: usb@11000 {
 			compatible = "generic-xhci";
-			reg = <0x00011000 0x1000>;
+			reg = <0x0 0x00011000 0x0 0x1000>;
 			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usbphy1 1>, <&usbphy2>, <&usbphy1 0>;
 			phy-names = "phy0", "phy1", "phy2";
@@ -62,7 +62,7 @@
 
 		bdc1: usb@21000 {
 			compatible = "brcm,bdc-v0.16";
-			reg = <0x00021000 0x1000>;
+			reg = <0x0 0x00021000 0x0 0x1000>;
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usbphy2>;
 			phy-names = "phy0";

arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts

@@ -10,18 +10,6 @@
 	model = "NVIDIA Jetson TX2 Developer Kit";
 	compatible = "nvidia,p2771-0000", "nvidia,tegra186";
 
-	aconnect {
-		status = "okay";
-
-		dma-controller@2930000 {
-			status = "okay";
-		};
-
-		interrupt-controller@2a40000 {
-			status = "okay";
-		};
-	};
-
 	i2c@3160000 {
 		power-monitor@42 {
 			compatible = "ti,ina3221";

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -29,6 +29,9 @@
 		i2c6 = &i2c6;
 		i2c7 = &i2c7;
 		i2c8 = &i2c8;
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;

arch/powerpc/Makefile

@@ -250,7 +250,6 @@ KBUILD_CFLAGS		+= $(call cc-option,-mno-string)
 
 cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
 cpu-as-$(CONFIG_ALTIVEC)	+= $(call as-option,-Wa$(comma)-maltivec)
-cpu-as-$(CONFIG_E200)		+= -Wa,-me200
 cpu-as-$(CONFIG_E500)		+= -Wa,-me500
 
 # When using '-many -mpower4' gas will first try and find a matching power4

arch/x86/include/asm/pgtable_types.h

@@ -147,6 +147,7 @@ enum page_cache_mode {
 #endif
 
 #define _PAGE_CACHE_MASK	(_PAGE_PAT | _PAGE_PCD | _PAGE_PWT)
+#define _PAGE_LARGE_CACHE_MASK	(_PAGE_PWT | _PAGE_PCD | _PAGE_PAT_LARGE)
 #define _PAGE_NOCACHE		(cachemode2protval(_PAGE_CACHE_MODE_UC))
 #define _PAGE_CACHE_WP		(cachemode2protval(_PAGE_CACHE_MODE_WP))
 

arch/x86/include/asm/sync_core.h

@@ -16,12 +16,13 @@ static inline void sync_core_before_usermode(void)
 	/* With PTI, we unconditionally serialize before running user code. */
 	if (static_cpu_has(X86_FEATURE_PTI))
 		return;
+
 	/*
-	 * Return from interrupt and NMI is done through iret, which is core
-	 * serializing.
+	 * Even if we're in an interrupt, we might reschedule before returning,
+	 * in which case we could switch to a different thread in the same mm
+	 * and return using SYSRET or SYSEXIT.  Instead of trying to keep
+	 * track of our need to sync the core, just sync right away.
 	 */
-	if (in_irq() || in_nmi())
-		return;
 	sync_core();
 }
 

arch/x86/kernel/apic/vector.c

@@ -272,20 +272,24 @@ static int assign_irq_vector_any_locked(struct irq_data *irqd)
 	const struct cpumask *affmsk = irq_data_get_affinity_mask(irqd);
 	int node = irq_data_get_node(irqd);
 
-	if (node == NUMA_NO_NODE)
-		goto all;
-	/* Try the intersection of @affmsk and node mask */
-	cpumask_and(vector_searchmask, cpumask_of_node(node), affmsk);
-	if (!assign_vector_locked(irqd, vector_searchmask))
-		return 0;
-	/* Try the node mask */
-	if (!assign_vector_locked(irqd, cpumask_of_node(node)))
-		return 0;
-all:
+	if (node != NUMA_NO_NODE) {
+		/* Try the intersection of @affmsk and node mask */
+		cpumask_and(vector_searchmask, cpumask_of_node(node), affmsk);
+		if (!assign_vector_locked(irqd, vector_searchmask))
+			return 0;
+	}
+
 	/* Try the full affinity mask */
 	cpumask_and(vector_searchmask, affmsk, cpu_online_mask);
 	if (!assign_vector_locked(irqd, vector_searchmask))
 		return 0;
+
+	if (node != NUMA_NO_NODE) {
+		/* Try the node mask */
+		if (!assign_vector_locked(irqd, cpumask_of_node(node)))
+			return 0;
+	}
+
 	/* Try the full online mask */
 	return assign_vector_locked(irqd, cpu_online_mask);
 }

arch/x86/lib/memcpy_64.S

@@ -15,8 +15,6 @@
  * to a jmp to memcpy_erms which does the REP; MOVSB mem copy.
  */
 
-.weak memcpy
-
 /*
  * memcpy - Copy a memory block.
  *
@@ -29,7 +27,7 @@
  * rax original destination
  */
 ENTRY(__memcpy)
-ENTRY(memcpy)
+SYM_FUNC_START_WEAK(memcpy)
 	ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \
 		      "jmp memcpy_erms", X86_FEATURE_ERMS
 

arch/x86/lib/memmove_64.S

@@ -24,9 +24,7 @@
  * Output:
  * rax: dest
  */
-.weak memmove
-
-ENTRY(memmove)
+SYM_FUNC_START_WEAK(memmove)
 ENTRY(__memmove)
 
 	/* Handle more 32 bytes in loop */

arch/x86/lib/memset_64.S

@@ -6,8 +6,6 @@
 #include <asm/alternative-asm.h>
 #include <asm/export.h>
 
-.weak memset
-
 /*
  * ISO C memset - set a memory block to a byte value. This function uses fast
  * string to get better performance than the original function. The code is
@@ -19,7 +17,7 @@
  *
  * rax   original destination
  */
-ENTRY(memset)
+SYM_FUNC_START_WEAK(memset)
 ENTRY(__memset)
 	/*
 	 * Some CPUs support enhanced REP MOVSB/STOSB feature. It is recommended

arch/x86/mm/mem_encrypt_identity.c

@@ -45,8 +45,8 @@
 #define PMD_FLAGS_LARGE		(__PAGE_KERNEL_LARGE_EXEC & ~_PAGE_GLOBAL)
 
 #define PMD_FLAGS_DEC		PMD_FLAGS_LARGE
-#define PMD_FLAGS_DEC_WP	((PMD_FLAGS_DEC & ~_PAGE_CACHE_MASK) | \
-				 (_PAGE_PAT | _PAGE_PWT))
+#define PMD_FLAGS_DEC_WP	((PMD_FLAGS_DEC & ~_PAGE_LARGE_CACHE_MASK) | \
+				 (_PAGE_PAT_LARGE | _PAGE_PWT))
 
 #define PMD_FLAGS_ENC		(PMD_FLAGS_LARGE | _PAGE_ENC)
 

arch/x86/mm/tlb.c

@@ -327,8 +327,14 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 	/*
 	 * The membarrier system call requires a full memory barrier and
 	 * core serialization before returning to user-space, after
-	 * storing to rq->curr. Writing to CR3 provides that full
-	 * memory barrier and core serializing instruction.
+	 * storing to rq->curr, when changing mm.  This is because
+	 * membarrier() sends IPIs to all CPUs that are in the target mm
+	 * to make them issue memory barriers.  However, if another CPU
+	 * switches to/from the target mm concurrently with
+	 * membarrier(), it can cause that CPU not to receive an IPI
+	 * when it really should issue a memory barrier.  Writing to CR3
+	 * provides that full memory barrier and core serializing
+	 * instruction.
 	 */
 	if (real_prev == next) {
 		VM_WARN_ON(this_cpu_read(cpu_tlbstate.ctxs[prev_asid].ctx_id) !=

drivers/gpu/drm/i915/display/intel_dp.c

@@ -567,7 +567,7 @@ static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
 		return 0;
 	}
 	/* Also take into account max slice width */
-	min_slice_count = min_t(u8, min_slice_count,
+	min_slice_count = max_t(u8, min_slice_count,
 				DIV_ROUND_UP(mode_hdisplay,
 					     max_slice_width));
 

drivers/input/misc/cm109.c

@@ -568,12 +568,15 @@ static int cm109_input_open(struct input_dev *idev)
 	dev->ctl_data->byte[HID_OR2] = dev->keybit;
 	dev->ctl_data->byte[HID_OR3] = 0x00;
 
+	dev->ctl_urb_pending = 1;
 	error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL);
-	if (error)
+	if (error) {
+		dev->ctl_urb_pending = 0;
 		dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n",
 			__func__, error);
-	else
+	} else {
 		dev->open = 1;
+	}
 
 	mutex_unlock(&dev->pm_mutex);
 

drivers/input/serio/i8042-x86ia64io.h

@@ -611,6 +611,48 @@ static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "AOA150"),
 		},
 	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire A114-31"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire A314-31"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire A315-31"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire ES1-132"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire ES1-332"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire ES1-432"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate Spin B118-RN"),
+		},
+	},
 	{
 		/* Advent 4211 */
 		.matches = {