v8.18

- DietPi-Build | Add support for Sparky SBC

.build/images/dietpi-build

@@ -111,6 +111,7 @@ case $HW_MODEL in
 	'68.1') iname='NanoPiM4' HW_ARCH=3 partition_start=16 root_size=752;;
 	'68.2') iname='NanoPCT4' HW_ARCH=3 partition_start=16 root_size=752;;
 	'68.3') iname='NanoPiNEO4' HW_ARCH=3 partition_start=16 root_size=752;;
+	70) iname='SparkySBC' HW_ARCH=2 partition_start=8 boot_size=48 root_size=712 boot_fstype='fat16';;
 	72) iname='ROCKPi4' HW_ARCH=3 partition_start=16 root_size=752;;
 	73) iname='ROCKPiS' HW_ARCH=3 partition_start=16 root_size=752;;
 	74) iname='RadxaZero' HW_ARCH=3 partition_start=4 root_size=764;;
@@ -459,7 +460,7 @@ export FP_ROOT_DEV CLONING_TOOL OUTPUT_IMG_NAME MOUNT_IT='Off' SKIP_ARCHIVE SKIP
 [[ $EDITION && $EDITION != 'all' ]] || bash -c "$(curl -sSf "https://raw.githubusercontent.com/$G_GITOWNER/DietPi/$G_GITBRANCH/.build/images/dietpi-imager")" 'DietPi-Imager' "$OUTPUT_IMG_NAME.img" || exit 1
 
 # Amiberry edition: Install automatically on first boot, enable autostart option and onboard audio on RPi
-if [[ $EDITION =~ ^(Amiberry|all)$ ]]
+if [[ $EDITION == 'Amiberry' || ( $EDITION == 'all' && $HW_MODEL == 0 ) ]]
 then
 	G_EXEC mv "$OUTPUT_IMG_NAME.img" "${OUTPUT_IMG_NAME}_Amiberry.img"
 	OUTPUT_IMG_NAME="${OUTPUT_IMG_NAME}_Amiberry"
@@ -498,7 +499,7 @@ then
 fi
 
 # AlloGUI edition: Pre-install Allo GUI with all managed audiophile software
-if [[ $EDITION =~ ^(AlloGUI|all)$ ]]
+if [[ $EDITION == 'AlloGUI' || ( $EDITION == 'all' && $HW_MODEL =~ ^(0|70)$ ) ]]
 then
 	G_EXEC mv "$OUTPUT_IMG_NAME.img" "${OUTPUT_IMG_NAME%_Amiberry}_AlloGUI.img"
 	OUTPUT_IMG_NAME="${OUTPUT_IMG_NAME%_Amiberry}_AlloGUI"

.build/images/dietpi-installer

@@ -1053,19 +1053,19 @@ _EOF_
 			# Workaround for Odroid N2 failing to boot from eMMC: https://forum.armbian.com/topic/20206-odroid-n2-issues-with-recent-firmware-and-emmc-modules/#comment-142409
 			elif (( $G_HW_MODEL == 15 ))
 			then
-				G_EXEC curl -sSfO 'https://dietpi.com/downloads/binaries/u-boot-odroidn2.bin.gz'
-				G_EXEC gzip -d u-boot-odroidn2.bin.gz
-				G_EXEC dd if=u-boot-odroidn2.bin "of=$BOOT_DEVICE" bs=512 seek=1 conv=notrunc,fdatasync
-				G_EXEC rm u-boot-odroidn2.bin
+				G_EXEC curl -sSfo u-boot.gz 'https://dietpi.com/downloads/binaries/u-boot-odroidn2.bin.gz'
+				G_EXEC gzip -d u-boot.gz
+				G_EXEC dd if=u-boot "of=$BOOT_DEVICE" bs=512 seek=1 conv=notrunc,fdatasync
+				G_EXEC rm u-boot
 
 			# Workaround for NanoPi R1 failing boot: https://github.com/MichaIng/DietPi/issues/5927
 			elif (( $G_HW_MODEL == 48 ))
 			then
-				G_EXEC curl -sSfO 'https://dietpi.com/downloads/binaries/u-boot-nanopir1.bin.gz'
-				G_EXEC gzip -d u-boot-nanopir1.bin.gz
+				G_EXEC curl -sSfo u-boot.gz 'https://dietpi.com/downloads/binaries/u-boot-nanopir1.bin.gz'
+				G_EXEC gzip -d u-boot.gz
 				G_EXEC dd if=/dev/zero "of=$BOOT_DEVICE" bs=1K count=1023 seek=1 conv=notrunc,fdatasync
-				G_EXEC dd if=u-boot-nanopir1.bin "of=$BOOT_DEVICE" bs=1K seek=8 conv=notrunc,fdatasync
-				G_EXEC rm u-boot-nanopir1.bin
+				G_EXEC dd if=u-boot "of=$BOOT_DEVICE" bs=1K seek=8 conv=notrunc,fdatasync
+				G_EXEC rm u-boot
 			fi
 
 		# RPi
@@ -1122,15 +1122,35 @@ _EOF_
 			G_EXEC rm package.deb
 
 		# VisionFive 2
-		elif [[ $G_HW_MODEL == 81 ]]
+		elif (( $G_HW_MODEL == 81 ))
 		then
-			[[ -f '/boot/extlinux/extlinux.conf' ]] && G_EXEC rm /boot/extlinux/extlinux.conf
 			G_EXEC curl -sSfo package.deb 'https://dietpi.com/downloads/binaries/linux-image-visionfive2.deb'
+			[[ -f '/boot/extlinux/extlinux.conf' ]] && G_EXEC rm /boot/extlinux/extlinux.conf
 			G_EXEC_OUTPUT=1 G_EXEC dpkg -i package.deb
 			G_EXEC rm package.deb
 			G_EXEC sed -i "s/root=[^[:blank:]]*/root=PARTUUID=$(findmnt -Ufnro PARTUUID -M /)/" /boot/extlinux/extlinux.conf
 			G_EXEC sed -i "s/rootfstype=[^[:blank:]]*/rootfstype=$(findmnt -Ufnro FSTYPE -M /)/" /boot/extlinux/extlinux.conf
 
+		# Sparky SBC
+		elif (( $G_HW_MODEL == 70 ))
+		then
+			G_EXEC curl -sSfo package.deb 'https://dietpi.com/downloads/binaries/firmware-sparkysbc.deb'
+			[[ -f '/boot/uenv.txt' ]] && G_EXEC rm /boot/uenv.txt
+			G_EXEC_OUTPUT=1 G_EXEC dpkg -i package.deb
+			G_EXEC rm package.deb
+
+			G_EXEC curl -sSfo u-boot.gz 'https://dietpi.com/downloads/binaries/u-boot-sparkysbc.img.gz'
+			G_EXEC gzip -d u-boot.gz
+			G_EXEC dd if=u-boot "of=$BOOT_DEVICE" bs=1 count=442 conv=notrunc,fdatasync
+			G_EXEC dd if=u-boot "of=$BOOT_DEVICE" bs=512 skip=1 seek=1 conv=notrunc,fdatasync
+			G_EXEC rm u-boot
+
+			# Use performance governor for stability
+			G_CONFIG_INJECT 'CONFIG_CPU_GOVERNOR=' 'CONFIG_CPU_GOVERNOR=performance' /boot/dietpi.txt
+
+			# Apply Lighttpd as default webserver, since Apache does not run on Linux 3.10: https://dietpi.com/forum/t/allogui-not-working-apache-service-doesnt-start/15708
+			G_CONFIG_INJECT 'AUTO_SETUP_WEB_SERVER_INDEX=' 'AUTO_SETUP_WEB_SERVER_INDEX=-2' /boot/dietpi.txt
+
 		# Armbian grab currently installed packages
 		elif [[ $G_HW_MODEL != 75 && $(dpkg-query -Wf '${Package} ') == *'armbian'* ]]
 		then
@@ -1196,8 +1216,8 @@ _EOF_
 			G_EXEC rm -Rf /etc/apt/sources.list.d/{,.??,.[^.]}*
 			G_EXEC eval "echo 'deb https://apt.armbian.com/ $DISTRO_TARGET_NAME main' > /etc/apt/sources.list.d/dietpi-armbian.list"
 
-		# Generic kernel + device tree + U-Boot package auto detect + initramfs-tools (not required on Sparky SBC)
-		elif (( $G_HW_MODEL != 75 && $G_HW_MODEL != 70 ))
+		# Generic kernel + device tree + U-Boot package auto detect + initramfs-tools
+		elif (( $G_HW_MODEL != 75 ))
 		then
 			mapfile -t apackages < <(dpkg-query -Wf '${Package}\n' | grep -E '^linux-(image|dtb|u-boot)-|^u-boot')
 			[[ ${apackages[0]} ]] || G_DIETPI-NOTIFY 2 'Unable to find kernel packages for installation. Assuming non-APT/.deb kernel installation.'
@@ -1809,84 +1829,8 @@ _EOF_'
 			G_EXEC eval 'echo -e '\''apm = 127\nforce_spindown_time = 120'\'' > /etc/hdparm.conf'
 		fi
 
-		# Sparky SBC
-		if (( $G_HW_MODEL == 70 ))
-		then
-			# Install latest kernel/drivers
-			G_EXEC curl -sSf 'https://raw.githubusercontent.com/sparky-sbc/sparky-test/master/dragon_fly_check/uImage' -o /boot/uImage
-			G_EXEC curl -sSfO 'https://raw.githubusercontent.com/sparky-sbc/sparky-test/master/dragon_fly_check/3.10.38.bz2'
-			G_EXEC rm -Rf /lib/modules/*
-			G_EXEC tar -xf 3.10.38.bz2 -C /lib/modules/
-			G_EXEC rm 3.10.38.bz2
-			# - USB audio update
-			G_EXEC curl -sSf 'https://raw.githubusercontent.com/sparky-sbc/sparky-test/master/dsd-marantz/snd-usb-audio.ko' -o /lib/modules/3.10.38/kernel/sound/usb/snd-usb-audio.ko
-			# - Ethernet update
-			G_EXEC curl -sSf 'https://raw.githubusercontent.com/sparky-sbc/sparky-test/master/sparky-eth/ethernet.ko' -o /lib/modules/3.10.38/kernel/drivers/net/ethernet/acts/ethernet.ko
-
-			# Boot args
-			cat << '_EOF_' > /boot/uenv.txt
-uenvcmd=setenv os_type linux;
-bootargs=earlyprintk clk_ignore_unused selinux=0 scandelay console=tty0 loglevel=1 real_rootflag=rw root=/dev/mmcblk0p2 rootwait init=/lib/systemd/systemd aotg.urb_fix=1 aotg.aotg1_speed=0 net.ifnames=0 systemd.unified_cgroup_hierarchy=0
-_EOF_
-			# Blacklist GPU and touch screen modules: https://github.com/MichaIng/DietPi/issues/699#issuecomment-271362441
-			cat << '_EOF_' > /etc/modprobe.d/dietpi-disable_sparkysbc_touchscreen.conf
-blacklist owl_camera
-blacklist gsensor_stk8313
-blacklist ctp_ft5x06
-blacklist ctp_gsl3680
-blacklist gsensor_bma222
-blacklist gsensor_mir3da
-_EOF_
-			cat << '_EOF_' > /etc/modprobe.d/dietpi-disable_sparkysbc_gpu.conf
-blacklist pvrsrvkm
-blacklist drm
-blacklist videobuf2_vmalloc
-blacklist bc_example
-_EOF_
-			# Use performance gov for stability
-			G_CONFIG_INJECT 'CONFIG_CPU_GOVERNOR=' 'CONFIG_CPU_GOVERNOR=performance' /boot/dietpi.txt
-
-			# Install script to toggle between USB and onboard Ethernet automatically
-			cat << '_EOF_' > /var/lib/dietpi/services/dietpi-sparkysbc_ethernet.sh
-#!/bin/dash
-# Called from: /etc/systemd/system/dietpi-sparkysbc_ethernet.service
-# We need to wait until USB Ethernet is established on USB bus, which takes much longer than onboard init.
-sleep 20
-# Disable onboard Ethernet if USB Ethernet is found
-if ip a s eth1 > /dev/null 2>&1; then
-
-	echo 'blacklist ethernet' > /etc/modprobe.d/dietpi-disable_sparkysbc_ethernet.conf
-	reboot
-
-# Enable onboard Ethernet if no adapter is found
-elif ! ip a s eth0 > /dev/null 2>&1; then
-
-	rm -f /etc/modprobe.d/dietpi-disable_sparkysbc_ethernet.conf
-	reboot
-
-fi
-_EOF_
-			G_EXEC chmod +x /var/lib/dietpi/services/dietpi-sparkysbc_ethernet.sh
-			cat << '_EOF_' > /etc/systemd/system/dietpi-sparkysbc_ethernet.service
-[Unit]
-Description=Sparky SBC auto detect and toggle onboard/USB Ethernet
-Wants=network-online.target
-After=network-online.target
-
-[Service]
-RemainAfterExit=yes
-ExecStart=/var/lib/dietpi/services/dietpi-sparkysbc_ethernet.sh
-
-[Install]
-WantedBy=multi-user.target
-_EOF_
-			G_EXEC systemctl enable dietpi-sparkysbc_ethernet
-
-			# Apply Lighttpd as default webserver, since Apache does not run on Linux 3.10: https://dietpi.com/forum/t/allogui-not-working-apache-service-doesnt-start/15708
-			G_CONFIG_INJECT 'AUTO_SETUP_WEB_SERVER_INDEX=' 'AUTO_SETUP_WEB_SERVER_INDEX=-2' /boot/dietpi.txt
-
 		# RPi
-		elif (( $G_HW_MODEL < 10 ))
+		if (( $G_HW_MODEL < 10 ))
 		then
 			# Apply minimum GPU memory split for server usage: This applies a custom dtoverlay to disable VCSM: https://github.com/MichaIng/DietPi/pull/3900
 			/boot/dietpi/func/dietpi-set_hardware gpumemsplit 16

.github/workflows/dietpi-build.yml

@@ -64,6 +64,7 @@ jobs:
         '"-m 68.1 -d 6", "-m 68.1 -d 7", '\
         '"-m 68.2 -d 6", "-m 68.2 -d 7", '\
         '"-m 68.3 -d 6", "-m 68.3 -d 7", '\
+        '"-m 70 -d 6 -e all", '\
         '"-m 72 -d 6", "-m 72 -d 7", '\
         '"-m 73 -d 6", "-m 73 -d 7", '\
         '"-m 74 -d 6", "-m 74 -d 7", '\