progress display followup

Marlin/Configuration_adv.h

@@ -1476,24 +1476,26 @@
 
 #endif // HAS_DISPLAY || DWIN_LCD_PROUI
 
-// Add the G-code 'M73' to set / report the current job progress
+// Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 //#define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  //#define SET_PROGRESS_PERCENT          // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  #define SET_REMAINING_TIME              // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
-  #if ENABLED(SET_INTERACTION_TIME)
-    #define SHOW_INTERACTION_TIME         // Display time until next user interaction ('C' = filament change)
+  //#define M73_REPORT                    // Report M73 values to host
+  #if BOTH(M73_REPORT, SDSUPPORT)
+    #define M73_REPORT_SD_ONLY            // Report only when printing from SD
   #endif
-  //#define M73_REPORT                    // Report progress to host with 'M73'
 #endif
 
-// LCD Print Progress options, multiple can be rotated depending on screen layout
+// LCD Print Progress options. Multiple times may be displayed in turn.
 #if HAS_DISPLAY && EITHER(SDSUPPORT, SET_PROGRESS_MANUALLY)
   #define SHOW_PROGRESS_PERCENT           // Show print progress percentage (doesn't affect progress bar)
   #define SHOW_ELAPSED_TIME               // Display elapsed printing time (prefix 'E')
   //#define SHOW_REMAINING_TIME           // Display estimated time to completion (prefix 'R')
-
+  #if ENABLED(SET_INTERACTION_TIME)
+    #define SHOW_INTERACTION_TIME         // Display time until next user interaction ('C' = filament change)
+  #endif
   //#define PRINT_PROGRESS_SHOW_DECIMALS  // Show/report progress with decimal digits, not all UIs support this
 
   #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)

Marlin/src/gcode/lcd/M73.cpp

@@ -33,10 +33,6 @@
   #include "../../lcd/e3v2/proui/dwin.h"
 #endif
 
-#if ENABLED(M73_REPORT)
-  #define M73_REPORT_PRUSA
-#endif
-
 /**
  * M73: Set percentage complete (for display on LCD)
  *
@@ -46,10 +42,9 @@
  *   M73 C12    ; Set next interaction countdown to 12 minutes
  *   M73        ; Report current values
  *
- * Use a shorter-than-Průša report format:
- * M73 Percent done: ---%; Time left: -----m; Change: -----m;
+ * M73 Progress: ---%; Time left: -----m; Change: -----m;
  *
- * When PRINT_PROGRESS_SHOW_DECIMALS is enabled - reports percent with 100 / 23.4 / 3.45 format
+ * When PRINT_PROGRESS_SHOW_DECIMALS is enabled - reports percent with 100% / 23.4% / 3.45% format
  *
  */
 void GcodeSuite::M73() {
@@ -79,19 +74,20 @@ void GcodeSuite::M73() {
   #endif
 
   #if ENABLED(M73_REPORT)
-  {
-    SERIAL_ECHO_MSG(
-        TERN(M73_REPORT_PRUSA, "M73 Percent done: ", "Progress: ")
-      , TERN(PRINT_PROGRESS_SHOW_DECIMALS, permyriadtostr4(ui.get_progress_permyriad()), ui.get_progress_percent())
+    if (TERN1(M73_REPORT_SD_ONLY, IS_SD_PRINTING())) {
+      SERIAL_ECHO_START();
+      SERIAL_ECHOPGM(" M73");
+      #if ENABLED(SET_PROGRESS_PERCENT)
+        SERIAL_ECHOPGM(" Progress: ", TERN(PRINT_PROGRESS_SHOW_DECIMALS, permyriadtostr4(ui.get_progress_permyriad()), ui.get_progress_percent()), "%;");
+      #endif
       #if ENABLED(SET_REMAINING_TIME)
-        , TERN(M73_REPORT_PRUSA, "; Print time remaining in mins: ", "%; Time left: "), ui.remaining_time / 60
+        SERIAL_ECHOPGM(" Time left: ", ui.remaining_time / 60, "m;");
       #endif
       #if ENABLED(SET_INTERACTION_TIME)
-        , TERN(M73_REPORT_PRUSA, "; Change in mins: ", "m; Change: "), ui.interaction_time / 60
+        SERIAL_ECHOPGM(" Change: ", ui.interaction_time / 60, "m;");
       #endif
-      , TERN(M73_REPORT_PRUSA, ";", "m")
-    );
-  }
+      SERIAL_EOL();
+    }
   #endif
 }
 

Marlin/src/lcd/HD44780/marlinui_HD44780.cpp

@@ -760,7 +760,7 @@ void MarlinUI::draw_status_message(const bool blink) {
 #if HAS_PRINT_PROGRESS
   #define TPOFFSET (LCD_WIDTH - 1)
   static uint8_t timepos = TPOFFSET - 6;
-  static char buffer[14];
+  static char buffer[8];
   static lcd_uint_t pc, pr;
 
   #if ENABLED(SHOW_PROGRESS_PERCENT)
@@ -776,9 +776,10 @@ void MarlinUI::draw_status_message(const bool blink) {
   #endif
   #if ENABLED(SHOW_REMAINING_TIME)
     void MarlinUI::drawRemain() {
-      const duration_t remaint = ui.get_remaining_time();
       if (printJobOngoing()) {
+        const duration_t remaint = ui.get_remaining_time();
         timepos = TPOFFSET - remaint.toDigital(buffer);
+        TERN_(NOT(LCD_INFO_SCREEN_STYLE), lcd_put_lchar(timepos - 1, 2, 0x20);)
         lcd_put_lchar(TERN(LCD_INFO_SCREEN_STYLE, 11, timepos), 2, 'R');
         lcd_put_u8str(buffer);
       }
@@ -789,18 +790,19 @@ void MarlinUI::draw_status_message(const bool blink) {
       const duration_t interactt = ui.interaction_time;
       if (printingIsActive() && interactt.value) {
         timepos = TPOFFSET - interactt.toDigital(buffer);
+        TERN_(NOT(LCD_INFO_SCREEN_STYLE), lcd_put_lchar(timepos - 1, 2, 0x20);)
         lcd_put_lchar(TERN(LCD_INFO_SCREEN_STYLE, 11, timepos), 2, 'C');
         lcd_put_u8str(buffer);
       }
     }
   #endif
   #if ENABLED(SHOW_ELAPSED_TIME)
     void MarlinUI::drawElapsed() {
-      const duration_t elapsedt = print_job_timer.duration();
       if (printJobOngoing()) {
+        const duration_t elapsedt = print_job_timer.duration();
         timepos = TPOFFSET - elapsedt.toDigital(buffer);
+        TERN_(NOT(LCD_INFO_SCREEN_STYLE), lcd_put_lchar(timepos - 1, 2, 0x20);)
         lcd_put_lchar(TERN(LCD_INFO_SCREEN_STYLE, 11, timepos), 2, 'E');
-        //lcd_put_lchar(timepos, 2, LCD_STR_CLOCK[0]);
         lcd_put_u8str(buffer);
       }
     }
@@ -919,7 +921,7 @@ void MarlinUI::draw_status_screen() {
       #if LCD_WIDTH < 20
 
         #if HAS_PRINT_PROGRESS
-          pc = 0, pr = 2;
+          pc = 0; pr = 2;
           rotate_progress();
         #endif
 
@@ -1006,14 +1008,14 @@ void MarlinUI::draw_status_screen() {
       #if LCD_WIDTH >= 20
 
         #if HAS_PRINT_PROGRESS
-          pc = timepos - 7, pr = 2;
+          pc = 6; pr = 2;
           rotate_progress();
         #else
           char c;
           uint16_t per;
           #if HAS_FAN0
             if (true
-              #if EXTRUDERS && ENABLED(ADAPTIVE_FAN_SLOWING)
+              #if BOTH(HAS_EXTRUDERS, ADAPTIVE_FAN_SLOWING)
                 && (blink || thermalManager.fan_speed_scaler[0] < 128)
               #endif
             ) {
@@ -1087,15 +1089,15 @@ void MarlinUI::draw_status_screen() {
       _draw_bed_status(blink);
     #elif HAS_PRINT_PROGRESS
       #define DREW_PRINT_PROGRESS 1
-      pc = 0, pr = 2;
+      pc = 0; pr = 2;
       rotate_progress();
     #endif
 
     //
     // All progress strings
     //
     #if HAS_PRINT_PROGRESS && !DREW_PRINT_PROGRESS
-      pc = LCD_WIDTH - 9, pr = 2;
+      pc = LCD_WIDTH - 9; pr = 2;
       rotate_progress();
     #endif
   #endif // LCD_INFO_SCREEN_STYLE 1

Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp

@@ -596,23 +596,58 @@ FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const
 
 #endif // HAS_CUTTER
 
-#if HAS_PRINT_PROGRESS
-
-  FORCE_INLINE void _draw_print_progress() {
-    if (!PanelDetected) return;
-    const uint8_t progress = ui._get_progress();
-    #if ENABLED(SDSUPPORT)
-      lcd_put_u8str(F("SD"));
-    #elif ENABLED(SET_PROGRESS_PERCENT)
-      lcd_put_u8str(F("P:"));
-    #endif
-    if (progress)
-      lcd.print(ui8tostr3rj(progress));
-    else
-      lcd_put_u8str(F("---"));
-    lcd.write('%');
-  }
 
+#if HAS_PRINT_PROGRESS   // UNTESTED!!!
+  #define TPOFFSET (LCD_WIDTH - 1)
+  static uint8_t timepos = TPOFFSET - 6;
+
+  #if ENABLED(SHOW_PROGRESS_PERCENT)
+    void MarlinUI::drawPercent() {
+      const uint8_t progress = ui.get_progress_percent();
+      if (progress) {
+        lcd_moveto(0, 2);
+        lcd_put_u8str(F(TERN(IS_SD_PRINTING, "SD", "P:")));
+        lcd.print(TERN(PRINT_PROGRESS_SHOW_DECIMALS, permyriadtostr4(ui.get_progress_permyriad()), ui8tostr3rj(progress)));
+        lcd.write('%');
+      }
+    }
+  #endif
+  #if ENABLED(SHOW_REMAINING_TIME)
+    void MarlinUI::drawRemain() {
+      if (printJobOngoing()) {
+        const duration_t remaint = ui.get_remaining_time();
+        char buffer[10];
+        timepos = TPOFFSET - remaint.toDigital(buffer);
+        lcd_moveto(timepos, 1);
+        lcd.write('R');
+        lcd.print(buffer);
+      }
+    }
+  #endif
+  #if ENABLED(SHOW_INTERACTION_TIME)
+    void MarlinUI::drawInter() {
+      const duration_t interactt = ui.interaction_time;
+      if (printingIsActive() && interactt.value) {
+        char buffer[10];
+        timepos = TPOFFSET - interactt.toDigital(buffer);
+        lcd_moveto(timepos, 1);
+        lcd.write('C');
+        lcd.print(buffer);
+      }
+    }
+  #endif
+  #if ENABLED(SHOW_ELAPSED_TIME)
+    void MarlinUI::drawElapsed() {
+      if (printJobOngoing()) {
+        const duration_t elapsedt = print_job_timer.duration();
+        char buffer[10];
+        timepos = TPOFFSET - elapsedt.toDigital(buffer);
+        lcd_moveto(timepos, 1);
+        lcd.write('E');
+        lcd.print(buffer);
+      }
+    }
+  #endif
 #endif // HAS_PRINT_PROGRESS
 
 #if ENABLED(LCD_PROGRESS_BAR)
@@ -796,23 +831,12 @@ void MarlinUI::draw_status_screen() {
   #endif
 
   //
-  // Line 2 - feedrate, , time
+  // Line 2 - feedrate, progress %, progress time
   //
 
   lcd_moveto(0, 1);
   lcd_put_u8str(F("FR")); lcd.print(i16tostr3rj(feedrate_percentage)); lcd.write('%');
-
-  #if BOTH(SDSUPPORT, HAS_PRINT_PROGRESS)
-    lcd_moveto(LCD_WIDTH / 2 - 3, 1);
-    _draw_print_progress();
-  #endif
-
-  char buffer[10];
-  duration_t elapsed = print_job_timer.duration();
-  uint8_t len = elapsed.toDigital(buffer);
-
-  lcd_moveto((LCD_WIDTH - 1) - len, 1);
-  lcd.write(LCD_STR_CLOCK[0]); lcd.print(buffer);
+  ui.rotate_progress();   // UNTESTED!!!
 
   //
   // Line 3 - progressbar