Add MKS Base 1.6 board

[thisiskeithb]

Description

#16764 requested MKS Base 1.6 support, which was pin compatible with the 1.5.

Benefits

Marlin will now report the correct board name.

Related Issues

#16764

[DanielMazurkiewicz]

Please consider this pins, as they are resolving in clear way potential conflicts with RAMPS definitions and add definition for second servo

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

/**
 * MKS BASE v1.6 with A4982 stepper drivers and digital micro-stepping
 */

#if HOTENDS > 2 || E_STEPPERS > 2
  #error "MKS BASE 1.6 only supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif

#define BOARD_INFO_NAME "MKS BASE 1.6"


/**
 * Microstepping pins
 */
#define X_MS1_PIN            5   // Digital 3  / Pin 5   / PE3
#define X_MS2_PIN            6   // Digital 6  / Pin 14  / PH3
#define Y_MS1_PIN           59   // Analog 5   / Pin 92  / PF5
#define Y_MS2_PIN           58   // Analog 4   / Pin 93  / PF4
#define Z_MS1_PIN           22   // Digital 22 / Pin 78  / PA0
#define Z_MS2_PIN           39   // Digital 39 / Pin 70  / PG2
#define E0_MS1_PIN          63   // Analog 9   / Pin 86  / PK1
#define E0_MS2_PIN          64   // Analog 10  / Pin 87  / PK2
#define E1_MS1_PIN          57   // Analog 3   / Pin 93  / PF3
#define E1_MS2_PIN           4   // Digital 4  / Pin 1   / PG5

/**
 * Servos pins
 */
#define SERVO1_PIN          12   // Digital 12 / Pin 25


#ifndef SERVO2_PIN
  #define SERVO2_PIN        -1
#endif
#ifndef SERVO3_PIN
  #define SERVO3_PIN        -1
#endif


/**
 * Heaters / Fans
 */
#define MOSFET_D_PIN         7

#ifndef FILWIDTH_PIN
  #define FILWIDTH_PIN      -1
#endif

#ifndef FIL_RUNOUT_PIN
  #define FIL_RUNOUT_PIN    -1
#endif

#ifndef PS_ON_PIN
  #define PS_ON_PIN         -1
#endif


#include "pins_RAMPS.h"

[thinkyhead]

@DanielMazurkiewicz — Thanks for the post. Are Pull Requests not working for you? It's lucky your post didn't get lost, because we commonly ignore comments on merged PRs.

[DanielMazurkiewicz]

@thinkyhead Here is the PR: #16806