🎨 Add OPTARG for optional arguments

Marlin/src/core/macros.h

@@ -195,6 +195,11 @@
 #define __TERN(T,V...)      ___TERN(_CAT(_NO,T),V)  // Prepend '_NO' to get '_NOT_0' or '_NOT_1'
 #define ___TERN(P,V...)     THIRD(P,V)              // If first argument has a comma, A. Else B.
 
+#define _OPTARG(A)          , A
+#define OPTARG(O,A)         TERN_(O,DEFER4(_OPTARG)(A))
+#define _OPTCODE(A)         A;
+#define OPTCODE(O,A)        TERN_(O,DEFER4(_OPTCODE)(A))
+
 // Macros to avoid 'f + 0.0' which is not always optimized away. Minus included for symmetry.
 // Compiler flags -fno-signed-zeros -ffinite-math-only also cover 'f * 1.0', 'f - f', etc.
 #define PLUS_TERN0(O,A)     _TERN(_ENA_1(O),,+ (A)) // OPTION ? '+ (A)' : '<nul>'

Marlin/src/feature/bedlevel/mbl/mesh_bed_leveling.h

@@ -103,9 +103,7 @@ class mesh_bed_leveling {
   }
 
   static float get_z(const xy_pos_t &pos
-    #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
-      , const_float_t factor=1.0f
-    #endif
+    OPTARG(ENABLE_LEVELING_FADE_HEIGHT, const_float_t factor=1.0f)
   ) {
     #if DISABLED(ENABLE_LEVELING_FADE_HEIGHT)
       constexpr float factor = 1.0f;

Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp

@@ -362,15 +362,11 @@
       while (--segments) {
         raw += diff;
         planner.buffer_line(raw, scaled_fr_mm_s, active_extruder, segment_xyz_mm
-          #if ENABLED(SCARA_FEEDRATE_SCALING)
-            , inv_duration
-          #endif
+          OPTARG(SCARA_FEEDRATE_SCALING, inv_duration)
         );
       }
       planner.buffer_line(destination, scaled_fr_mm_s, active_extruder, segment_xyz_mm
-        #if ENABLED(SCARA_FEEDRATE_SCALING)
-          , inv_duration
-        #endif
+        OPTARG(SCARA_FEEDRATE_SCALING, inv_duration)
       );
       return false; // Did not set current from destination
     }

Marlin/src/feature/caselight.cpp

@@ -41,7 +41,7 @@ bool CaseLight::on = CASE_LIGHT_DEFAULT_ON;
 #if CASE_LIGHT_IS_COLOR_LED
   #include "leds/leds.h"
   constexpr uint8_t init_case_light[] = CASE_LIGHT_DEFAULT_COLOR;
-  LEDColor CaseLight::color = { init_case_light[0], init_case_light[1], init_case_light[2], TERN_(HAS_WHITE_LED, init_case_light[3]) };
+  LEDColor CaseLight::color = { init_case_light[0], init_case_light[1], init_case_light[2] OPTARG(HAS_WHITE_LED, init_case_light[3]) };
 #endif
 
 void CaseLight::update(const bool sflag) {

Marlin/src/feature/fwretract.cpp

@@ -91,11 +91,7 @@ void FWRetract::reset() {
  * Note: Auto-retract will apply the set Z hop in addition to any Z hop
  *       included in the G-code. Use M207 Z0 to to prevent double hop.
  */
-void FWRetract::retract(const bool retracting
-  #if HAS_MULTI_EXTRUDER
-    , bool swapping/*=false*/
-  #endif
-) {
+void FWRetract::retract(const bool retracting OPTARG(HAS_MULTI_EXTRUDER, bool swapping/*=false*/)) {
   // Prevent two retracts or recovers in a row
   if (retracted[active_extruder] == retracting) return;
 

Marlin/src/feature/fwretract.h

@@ -74,11 +74,7 @@ class FWRetract {
     #endif
   }
 
-  static void retract(const bool retracting
-    #if HAS_MULTI_EXTRUDER
-      , bool swapping = false
-    #endif
-  );
+  static void retract(const bool retracting OPTARG(HAS_MULTI_EXTRUDER, bool swapping = false));
 
   static void M207();
   static void M207_report(const bool forReplay=false);

Marlin/src/feature/leds/leds.cpp

@@ -75,9 +75,7 @@ void LEDLights::setup() {
 }
 
 void LEDLights::set_color(const LEDColor &incol
-  #if ENABLED(NEOPIXEL_LED)
-    , bool isSequence/*=false*/
-  #endif
+  OPTARG(NEOPIXEL_LED, bool isSequence/*=false*/)
 ) {
 
   #if ENABLED(NEOPIXEL_LED)

Marlin/src/feature/leds/leds.h

@@ -43,46 +43,21 @@
  */
 typedef struct LEDColor {
   uint8_t r, g, b
-    #if HAS_WHITE_LED
-      , w
-      #if ENABLED(NEOPIXEL_LED)
-        , i
-      #endif
-    #endif
+    OPTARG(HAS_WHITE_LED, w)
+    OPTARG(NEOPIXEL_LED, i)
   ;
 
   LEDColor() : r(255), g(255), b(255)
-    #if HAS_WHITE_LED
-      , w(255)
-      #if ENABLED(NEOPIXEL_LED)
-        , i(NEOPIXEL_BRIGHTNESS)
-      #endif
-    #endif
+    OPTARG(HAS_WHITE_LED, w(255))
+    OPTARG(NEOPIXEL_LED, i(NEOPIXEL_BRIGHTNESS))
   {}
 
-  LEDColor(uint8_t r, uint8_t g, uint8_t b
-    #if HAS_WHITE_LED
-      , uint8_t w=0
-      #if ENABLED(NEOPIXEL_LED)
-        , uint8_t i=NEOPIXEL_BRIGHTNESS
-      #endif
-    #endif
-    ) : r(r), g(g), b(b)
-    #if HAS_WHITE_LED
-      , w(w)
-      #if ENABLED(NEOPIXEL_LED)
-        , i(i)
-      #endif
-    #endif
-  {}
+  LEDColor(uint8_t r, uint8_t g, uint8_t b OPTARG(HAS_WHITE_LED, uint8_t w=0) OPTARG(NEOPIXEL_LED, uint8_t i=NEOPIXEL_BRIGHTNESS))
+    : r(r), g(g), b(b) OPTARG(HAS_WHITE_LED, w(w)) OPTARG(NEOPIXEL_LED, i(i)) {}
 
   LEDColor(const uint8_t (&rgbw)[4]) : r(rgbw[0]), g(rgbw[1]), b(rgbw[2])
-    #if HAS_WHITE_LED
-      , w(rgbw[3])
-      #if ENABLED(NEOPIXEL_LED)
-        , i(NEOPIXEL_BRIGHTNESS)
-      #endif
-    #endif
+    OPTARG(HAS_WHITE_LED, w(rgbw[3]))
+    OPTARG(NEOPIXEL_LED, i(NEOPIXEL_BRIGHTNESS))
   {}
 
   LEDColor& operator=(const uint8_t (&rgbw)[4]) {
@@ -111,15 +86,7 @@ typedef struct LEDColor {
 /**
  * Color helpers and presets
  */
-#if HAS_WHITE_LED
-  #if ENABLED(NEOPIXEL_LED)
-    #define MakeLEDColor(R,G,B,W,I) LEDColor(R, G, B, W, I)
-  #else
-    #define MakeLEDColor(R,G,B,W,I) LEDColor(R, G, B, W)
-  #endif
-#else
-  #define MakeLEDColor(R,G,B,W,I)   LEDColor(R, G, B)
-#endif
+#define MakeLEDColor(R,G,B,W,I)   LEDColor(R, G, B OPTARG(HAS_WHITE_LED, W) OPTARG(NEOPIXEL_LED, I))
 
 #define LEDColorOff()             LEDColor(  0,   0,   0)
 #define LEDColorRed()             LEDColor(255,   0,   0)
@@ -147,25 +114,15 @@ class LEDLights {
   static void setup(); // init()
 
   static void set_color(const LEDColor &color
-    #if ENABLED(NEOPIXEL_LED)
-      , bool isSequence=false
-    #endif
+    OPTARG(NEOPIXEL_LED, bool isSequence=false)
   );
 
   static inline void set_color(uint8_t r, uint8_t g, uint8_t b
-    #if HAS_WHITE_LED
-      , uint8_t w=0
-    #endif
-    #if ENABLED(NEOPIXEL_LED)
-      , uint8_t i=NEOPIXEL_BRIGHTNESS
-      , bool isSequence=false
-    #endif
+    OPTARG(HAS_WHITE_LED, uint8_t w=0)
+    OPTARG(NEOPIXEL_LED, uint8_t i=NEOPIXEL_BRIGHTNESS)
+    OPTARG(NEOPIXEL_LED, bool isSequence=false)
   ) {
-    set_color(MakeLEDColor(r, g, b, w, i)
-      #if ENABLED(NEOPIXEL_LED)
-        , isSequence
-      #endif
-    );
+    set_color(MakeLEDColor(r, g, b, w, i) OPTARG(NEOPIXEL_LED, isSequence));
   }
 
   static inline void set_off()   { set_color(LEDColorOff()); }

Marlin/src/feature/leds/pca9632.cpp

@@ -93,9 +93,7 @@ static void PCA9632_WriteRegister(const byte addr, const byte regadd, const byte
 }
 
 static void PCA9632_WriteAllRegisters(const byte addr, const byte regadd, const byte vr, const byte vg, const byte vb
-  #if ENABLED(PCA9632_RGBW)
-    , const byte vw
-  #endif
+  OPTARG(PCA9632_RGBW, const byte vw)
 ) {
   #if DISABLED(PCA9632_NO_AUTO_INC)
     uint8_t data[4];
@@ -143,9 +141,7 @@ void PCA9632_set_led_color(const LEDColor &color) {
                     ;
 
   PCA9632_WriteAllRegisters(PCA9632_ADDRESS,PCA9632_PWM0, color.r, color.g, color.b
-    #if ENABLED(PCA9632_RGBW)
-      , color.w
-    #endif
+    OPTARG(PCA9632_RGBW, color.w)
   );
   PCA9632_WriteRegister(PCA9632_ADDRESS,PCA9632_LEDOUT, LEDOUT);
 }

Marlin/src/feature/tmc_util.h

@@ -70,15 +70,9 @@ class TMCStorage {
     }
 
     struct {
-      #if ENABLED(HAS_STEALTHCHOP)
-        bool stealthChop_enabled = false;
-      #endif
-      #if ENABLED(HYBRID_THRESHOLD)
-        uint8_t hybrid_thrs = 0;
-      #endif
-      #if ENABLED(USE_SENSORLESS)
-        int16_t homing_thrs = 0;
-      #endif
+      OPTCODE(HAS_STEALTHCHOP,  bool stealthChop_enabled = false)
+      OPTCODE(HYBRID_THRESHOLD, uint8_t hybrid_thrs = 0)
+      OPTCODE(USE_SENSORLESS,   int16_t homing_thrs = 0)
     } stored;
 };
 

Marlin/src/gcode/bedlevel/G26.cpp

@@ -330,12 +330,8 @@ typedef struct {
         thermalManager.setTargetBed(bed_temp);
 
         // Wait for the temperature to stabilize
-        if (!thermalManager.wait_for_bed(true
-            #if G26_CLICK_CAN_CANCEL
-              , true
-            #endif
-          )
-        ) return G26_ERR;
+        if (!thermalManager.wait_for_bed(true OPTARG(G26_CLICK_CAN_CANCEL, true)))
+          return G26_ERR;
       }
 
     #else
@@ -352,11 +348,8 @@ typedef struct {
     thermalManager.setTargetHotend(hotend_temp, active_extruder);
 
     // Wait for the temperature to stabilize
-    if (!thermalManager.wait_for_hotend(active_extruder, true
-      #if G26_CLICK_CAN_CANCEL
-        , true
-      #endif
-    )) return G26_ERR;
+    if (!thermalManager.wait_for_hotend(active_extruder, true OPTARG(G26_CLICK_CAN_CANCEL, true)))
+      return G26_ERR;
 
     #if HAS_WIRED_LCD
       ui.reset_status();

Marlin/src/gcode/motion/G2_G3.cpp

@@ -249,9 +249,7 @@ void plan_arc(
     #endif
 
     if (!planner.buffer_line(raw, scaled_fr_mm_s, active_extruder, 0
-      #if ENABLED(SCARA_FEEDRATE_SCALING)
-        , inv_duration
-      #endif
+      OPTARG(SCARA_FEEDRATE_SCALING, inv_duration)
     )) break;
   }
 
@@ -266,9 +264,7 @@ void plan_arc(
   #endif
 
   planner.buffer_line(raw, scaled_fr_mm_s, active_extruder, 0
-    #if ENABLED(SCARA_FEEDRATE_SCALING)
-      , inv_duration
-    #endif
+    OPTARG(SCARA_FEEDRATE_SCALING, inv_duration)
   );
 
   TERN_(AUTO_BED_LEVELING_UBL, raw[l_axis] = start_L);

Marlin/src/gcode/queue.cpp

@@ -84,9 +84,7 @@ char GCodeQueue::injected_commands[64]; // = { 0 }
 
 
 void GCodeQueue::RingBuffer::commit_command(bool skip_ok
-  #if HAS_MULTI_SERIAL
-    , serial_index_t serial_ind/*=-1*/
-  #endif
+  OPTARG(HAS_MULTI_SERIAL, serial_index_t serial_ind/*=-1*/)
 ) {
   commands[index_w].skip_ok = skip_ok;
   TERN_(HAS_MULTI_SERIAL, commands[index_w].port = serial_ind);
@@ -100,9 +98,7 @@ void GCodeQueue::RingBuffer::commit_command(bool skip_ok
  * Return false for a full buffer, or if the 'command' is a comment.
  */
 bool GCodeQueue::RingBuffer::enqueue(const char *cmd, bool skip_ok/*=true*/
-  #if HAS_MULTI_SERIAL
-    , serial_index_t serial_ind/*=-1*/
-  #endif
+  OPTARG(HAS_MULTI_SERIAL, serial_index_t serial_ind/*=-1*/)
 ) {
   if (*cmd == ';' || length >= BUFSIZE) return false;
   strcpy(commands[index_w].buffer, cmd);

Marlin/src/gcode/queue.h

@@ -80,15 +80,11 @@ class GCodeQueue {
     void advance_pos(uint8_t &p, const int inc) { if (++p >= BUFSIZE) p = 0; length += inc; }
 
     void commit_command(bool skip_ok
-      #if HAS_MULTI_SERIAL
-        , serial_index_t serial_ind = serial_index_t()
-      #endif
+      OPTARG(HAS_MULTI_SERIAL, serial_index_t serial_ind = serial_index_t())
     );
 
     bool enqueue(const char *cmd, bool skip_ok = true
-      #if HAS_MULTI_SERIAL
-        , serial_index_t serial_ind = serial_index_t()
-      #endif
+      OPTARG(HAS_MULTI_SERIAL, serial_index_t serial_ind = serial_index_t())
     );
 
     void ok_to_send();

Marlin/src/lcd/marlinui.cpp

@@ -758,9 +758,7 @@ void MarlinUI::quick_feedback(const bool clear_buttons/*=true*/) {
   // Tell ui.update() to start a move to current_position after a short delay.
   //
   void ManualMove::soon(const AxisEnum move_axis
-    #if MULTI_E_MANUAL
-      , const int8_t eindex/*=active_extruder*/
-    #endif
+    OPTARG(MULTI_E_MANUAL, const int8_t eindex/*=active_extruder*/)
   ) {
     TERN_(MULTI_E_MANUAL, if (move_axis == E_AXIS) e_index = eindex);
     start_time = millis() + (menu_scale < 0.99f ? 0UL : 250UL); // delay for bigger moves

Marlin/src/lcd/marlinui.h

@@ -182,11 +182,7 @@
       static bool constexpr processing = false;
     #endif
     static void task();
-    static void soon(const AxisEnum axis
-      #if MULTI_E_MANUAL
-        , const int8_t eindex=active_extruder
-      #endif
-    );
+    static void soon(const AxisEnum axis OPTARG(MULTI_E_MANUAL, const int8_t eindex=active_extruder));
   };
 
 #endif

Marlin/src/lcd/menu/menu_motion.cpp

@@ -100,11 +100,7 @@ void lcd_move_z() { _lcd_move_xyz(GET_TEXT(MSG_MOVE_Z), Z_AXIS); }
       if (!ui.manual_move.processing) {
         const float diff = float(int32_t(ui.encoderPosition)) * ui.manual_move.menu_scale;
         TERN(IS_KINEMATIC, ui.manual_move.offset, current_position.e) += diff;
-        ui.manual_move.soon(E_AXIS
-          #if MULTI_E_MANUAL
-            , eindex
-          #endif
-        );
+        ui.manual_move.soon(E_AXIS OPTARG(MULTI_E_MANUAL, eindex));
         ui.refresh(LCDVIEW_REDRAW_NOW);
       }
       ui.encoderPosition = 0;

Marlin/src/lcd/tft/ui_1024x600.cpp

@@ -724,11 +724,7 @@ static void moveAxis(const AxisEnum axis, const int8_t direction) {
       drawMessage(msg);
     #endif
 
-    ui.manual_move.soon(axis
-      #if MULTI_E_MANUAL
-        , motionAxisState.e_selection
-      #endif
-    );
+    ui.manual_move.soon(axis OPTARG(MULTI_E_MANUAL, motionAxisState.e_selection));
   }
 
   drawAxisValue(axis);

Marlin/src/lcd/tft/ui_320x240.cpp

@@ -709,11 +709,7 @@ static void moveAxis(const AxisEnum axis, const int8_t direction) {
       drawMessage(msg);
     #endif
 
-    ui.manual_move.soon(axis
-      #if MULTI_E_MANUAL
-        , motionAxisState.e_selection
-      #endif
-    );
+    ui.manual_move.soon(axis OPTARG(MULTI_E_MANUAL, motionAxisState.e_selection));
   }
 
   drawAxisValue(axis);

Marlin/src/lcd/tft/ui_480x320.cpp

@@ -711,11 +711,7 @@ static void moveAxis(const AxisEnum axis, const int8_t direction) {
       drawMessage(msg);
     #endif
 
-    ui.manual_move.soon(axis
-      #if MULTI_E_MANUAL
-        , motionAxisState.e_selection
-      #endif
-    );
+    ui.manual_move.soon(axis OPTARG(MULTI_E_MANUAL, motionAxisState.e_selection));
   }
 
   drawAxisValue(axis);