Flash leveling (for some STM32) (#16174)

Marlin/src/HAL/HAL_STM32/persistent_store_flash.cpp

@@ -0,0 +1,265 @@
+/**
+ * Marlin 3D Printer Firmware
+ *
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2016 Bob Cousins [email protected]
+ * Copyright (c) 2015-2016 Nico Tonnhofer [email protected]
+ * Copyright (c) 2016 Victor Perez [email protected]
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
+
+#include "../../inc/MarlinConfig.h"
+
+#if BOTH(EEPROM_SETTINGS, FLASH_EEPROM_EMULATION)
+
+#include "../shared/persistent_store_api.h"
+
+
+// Only STM32F4 can support wear leveling at this time
+#ifndef STM32F4xx
+  #undef FLASH_EEPROM_LEVELING
+#endif
+
+/**
+ * The STM32 HAL supports chips that deal with "pages" and some with "sectors" and some that
+ * even have multiple "banks" of flash.
+ *
+ * This code is a bit of a mashup of
+ *   framework-arduinoststm32/cores/arduino/stm32/stm32_eeprom.c
+ *   hal/hal_lpc1768/persistent_store_flash.cpp
+ *
+ * This has only be written against those that use a single "sector" design.
+ *
+ * Those that deal with "pages" could be made to work. Looking at the STM32F07 for example, there are
+ * 128 "pages", each 2kB in size. If we continued with our EEPROM being 4Kb, we'd always need to operate
+ * on 2 of these pages. Each write, we'd use 2 different pages from a pool of pages until we are done.
+ */
+
+#if ENABLED(FLASH_EEPROM_LEVELING)
+
+  #include "stm32_def.h"
+
+  #define DEBUG_OUT ENABLED(EEPROM_CHITCHAT)
+  #include "src/core/debug_out.h"
+
+  #ifndef EEPROM_SIZE
+    #define EEPROM_SIZE           0x1000  // 4kB
+  #endif
+
+  #ifndef FLASH_SECTOR
+    #define FLASH_SECTOR          (FLASH_SECTOR_TOTAL - 1)
+  #endif
+  #ifndef FLASH_UNIT_SIZE
+    #define FLASH_UNIT_SIZE       0x20000 // 128kB
+  #endif
+
+  #define FLASH_ADDRESS_START     (FLASH_END - ((FLASH_SECTOR_TOTAL - FLASH_SECTOR) * FLASH_UNIT_SIZE) + 1)
+  #define FLASH_ADDRESS_END       (FLASH_ADDRESS_START + FLASH_UNIT_SIZE  - 1)
+
+  #define EEPROM_SLOTS            (FLASH_UNIT_SIZE/EEPROM_SIZE)
+  #define SLOT_ADDRESS(slot)      (FLASH_ADDRESS_START + (slot * EEPROM_SIZE))
+
+  #define UNLOCK_FLASH()          if (!flash_unlocked) { \
+                                    HAL_FLASH_Unlock(); \
+                                    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | \
+                                                           FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR); \
+                                    flash_unlocked = true; \
+                                  }
+  #define LOCK_FLASH()            if (flash_unlocked) { HAL_FLASH_Lock(); flash_unlocked = false; }
+
+  #define EMPTY_UINT32            ((uint32_t)-1)
+  #define EMPTY_UINT8             ((uint8_t)-1)
+
+  static uint8_t ram_eeprom[EEPROM_SIZE] __attribute__((aligned(4))) = {0};
+  static int current_slot = -1;
+
+  static_assert(0 == EEPROM_SIZE % 4, "EEPROM_SIZE must be a multiple of 4"); // Ensure copying as uint32_t is safe
+  static_assert(0 == FLASH_UNIT_SIZE % EEPROM_SIZE, "EEPROM_SIZE must divide evenly into your FLASH_UNIT_SIZE");
+  static_assert(FLASH_UNIT_SIZE >= EEPROM_SIZE, "FLASH_UNIT_SIZE must be greater than or equal to your EEPROM_SIZE");
+  static_assert(IS_FLASH_SECTOR(FLASH_SECTOR), "FLASH_SECTOR is invalid");
+  static_assert(IS_POWER_OF_2(FLASH_UNIT_SIZE), "FLASH_UNIT_SIZE should be a power of 2, please check your chip's spec sheet");
+
+#endif
+
+static bool eeprom_data_written = false;
+
+bool PersistentStore::access_start() {
+
+  #if ENABLED(FLASH_EEPROM_LEVELING)
+
+    if (current_slot == -1 || eeprom_data_written) {
+      // This must be the first time since power on that we have accessed the storage, or someone
+      // loaded and called write_data and never called access_finish.
+      // Lets go looking for the slot that holds our configuration.
+      if (eeprom_data_written) DEBUG_ECHOLN("Dangling EEPROM write_data");
+      uint32_t address = FLASH_ADDRESS_START;
+      while (address <= FLASH_ADDRESS_END) {
+        uint32_t address_value = (*(__IO uint32_t*)address);
+        if (address_value != EMPTY_UINT32) {
+          current_slot = (address - FLASH_ADDRESS_START) / EEPROM_SIZE;
+          break;
+        }
+        address += sizeof(uint32_t);
+      }
+      if (current_slot == -1) {
+        // We didn't find anything, so we'll just intialize to empty
+        for (int i = 0; i < EEPROM_SIZE; i++) ram_eeprom[i] = EMPTY_UINT8;
+        current_slot = EEPROM_SLOTS;
+      }
+      else {
+        // load current settings
+        uint8_t *eeprom_data = (uint8_t *)SLOT_ADDRESS(current_slot);
+        for (int i = 0; i < EEPROM_SIZE; i++) ram_eeprom[i] = eeprom_data[i];
+        DEBUG_ECHOLNPAIR("EEPROM loaded from slot ", current_slot, ".");
+      }
+      eeprom_data_written = false;
+    }
+
+  #else
+    eeprom_buffer_fill();
+  #endif
+
+  return true;
+}
+
+bool PersistentStore::access_finish() {
+
+  if (eeprom_data_written) {
+
+    #if ENABLED(FLASH_EEPROM_LEVELING)
+
+      HAL_StatusTypeDef status = HAL_ERROR;
+      bool flash_unlocked = false;
+
+      if (--current_slot < 0) {
+        // all slots have been used, erase everything and start again
+
+        FLASH_EraseInitTypeDef EraseInitStruct;
+        uint32_t SectorError = 0;
+
+        EraseInitStruct.TypeErase = FLASH_TYPEERASE_SECTORS;
+        EraseInitStruct.VoltageRange = FLASH_VOLTAGE_RANGE_3;
+        EraseInitStruct.Sector = FLASH_SECTOR;
+        EraseInitStruct.NbSectors = 1;
+
+        current_slot = EEPROM_SLOTS - 1;
+        UNLOCK_FLASH();
+
+        status = HAL_FLASHEx_Erase(&EraseInitStruct, &SectorError);
+        if (status != HAL_OK) {
+          DEBUG_ECHOLNPAIR("HAL_FLASHEx_Erase=", status);
+          DEBUG_ECHOLNPAIR("GetError=", HAL_FLASH_GetError());
+          DEBUG_ECHOLNPAIR("SectorError=", SectorError);
+          LOCK_FLASH();
+          return false;
+        }
+      }
+
+      UNLOCK_FLASH();
+
+      uint32_t offset = 0;
+      uint32_t address = SLOT_ADDRESS(current_slot);
+      uint32_t address_end = address + EEPROM_SIZE;
+      uint32_t data = 0;
+
+      bool success = true;
+
+      while (address < address_end) {
+        memcpy(&data, ram_eeprom + offset, sizeof(uint32_t));
+        status = HAL_FLASH_Program(FLASH_TYPEPROGRAM_WORD, address, data);
+        if (status == HAL_OK) {
+          address += sizeof(uint32_t);
+          offset += sizeof(uint32_t);
+        }
+        else {
+          DEBUG_ECHOLNPAIR("HAL_FLASH_Program=", status);
+          DEBUG_ECHOLNPAIR("GetError=", HAL_FLASH_GetError());
+          DEBUG_ECHOLNPAIR("address=", address);
+          success = false;
+          break;
+        }
+      }
+
+      LOCK_FLASH();
+
+      if (success) {
+        eeprom_data_written = false;
+        DEBUG_ECHOLNPAIR("EEPROM saved to slot ", current_slot, ".");
+      }
+
+      return success;
+
+    #else
+      eeprom_buffer_flush();
+      eeprom_data_written = false;
+    #endif
+  }
+
+  return true;
+}
+
+bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
+  while (size--) {
+    uint8_t v = *value;
+    #if ENABLED(FLASH_EEPROM_LEVELING)
+      if (v != ram_eeprom[pos]) {
+        ram_eeprom[pos] = v;
+        eeprom_data_written = true;
+      }
+    #else
+      if (v != eeprom_buffered_read_byte(pos)) {
+        eeprom_buffered_write_byte(pos, v);
+        eeprom_data_written = true;
+      }
+    #endif
+    crc16(crc, &v, 1);
+    pos++;
+    value++;
+  }
+  return false;
+}
+
+bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+  do {
+    const uint8_t c = (
+      #if ENABLED(FLASH_EEPROM_LEVELING)
+        ram_eeprom[pos]
+      #else
+        eeprom_buffered_read_byte(pos)
+      #endif
+    );
+    if (writing) *value = c;
+    crc16(crc, &c, 1);
+    pos++;
+    value++;
+  } while (--size);
+  return false;
+}
+
+size_t PersistentStore::capacity() {
+  return (
+    #if ENABLED(FLASH_EEPROM_LEVELING)
+      EEPROM_SIZE
+    #else
+      E2END + 1
+    #endif
+  );
+}
+
+#endif // EEPROM_SETTINGS && FLASH_EEPROM_EMULATION
+#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC

Marlin/src/HAL/HAL_STM32/persistent_store_impl.cpp

@@ -24,29 +24,15 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(EEPROM_SETTINGS) && ANY(FLASH_EEPROM_EMULATION, SRAM_EEPROM_EMULATION, SPI_EEPROM, I2C_EEPROM)
+#if ENABLED(EEPROM_SETTINGS) && ANY(SRAM_EEPROM_EMULATION, SPI_EEPROM, I2C_EEPROM)
 
 #include "../shared/persistent_store_api.h"
 
-#if ENABLED(FLASH_EEPROM_EMULATION)
-  #include <EEPROM.h>
-  static bool eeprom_data_written = false;
-#endif
-
 bool PersistentStore::access_start() {
-  #if ENABLED(FLASH_EEPROM_EMULATION)
-    eeprom_buffer_fill();
-  #endif
   return true;
 }
 
 bool PersistentStore::access_finish() {
-  #if ENABLED(FLASH_EEPROM_EMULATION)
-    if (eeprom_data_written) {
-      eeprom_buffer_flush();
-      eeprom_data_written = false;
-    }
-  #endif
   return true;
 }
 
@@ -66,8 +52,6 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
           return true;
         }
       }
-    #elif ENABLED(FLASH_EEPROM_EMULATION)
-      eeprom_buffered_write_byte(pos, v);
     #else
       *(__IO uint8_t *)(BKPSRAM_BASE + (uint8_t * const)pos) = v;
     #endif
@@ -76,9 +60,6 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
     pos++;
     value++;
   };
-  #if ENABLED(FLASH_EEPROM_EMULATION)
-    eeprom_data_written = true;
-  #endif
 
   return false;
 }
@@ -89,8 +70,6 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
     const uint8_t c = (
       #if EITHER(SPI_EEPROM, I2C_EEPROM)
         eeprom_read_byte((uint8_t*)pos)
-      #elif ENABLED(FLASH_EEPROM_EMULATION)
-        eeprom_buffered_read_byte(pos)
       #else
         (*(__IO uint8_t *)(BKPSRAM_BASE + ((uint8_t*)pos)))
       #endif
@@ -114,5 +93,5 @@ size_t PersistentStore::capacity() {
   );
 }
 
-#endif // EEPROM_SETTINGS && (FLASH_EEPROM_EMULATION || SRAM_EEPROM_EMULATION || SPI_EEPROM || I2C_EEPROM)
+#endif // EEPROM_SETTINGS && (SRAM_EEPROM_EMULATION || SPI_EEPROM || I2C_EEPROM)
 #endif // ARDUINO_ARCH_STM32 && !STM32GENERIC

Marlin/src/lcd/language/language_da.h

@@ -180,7 +180,7 @@ namespace Language_da {
   PROGMEM Language_Str MSG_DAC_PERCENT_Y                   = _UxGT("Y Driv %");
   PROGMEM Language_Str MSG_DAC_PERCENT_Z                   = _UxGT("Z Driv %");
   PROGMEM Language_Str MSG_DAC_PERCENT_E                   = _UxGT("E Driv %");
-  
+
   PROGMEM Language_Str MSG_DAC_EEPROM_WRITE                = _UxGT("DAC EEPROM Skriv");
 
   PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME   = _UxGT("Forsæt print");