Skip to content

Commit

Permalink
♻️ LCD_PINS_ENABLE => LCD_PINS_EN
Browse files Browse the repository at this point in the history
  • Loading branch information
@thinkyhead
thinkyhead committed Apr 8, 2023
1 parent 56f2da8 commit cd5dc72
Show file tree
Hide file tree
Showing 165 changed files with 387 additions and 383 deletions.
1 change: 1 addition & 0 deletions Marlin/src/HAL/AVR/fastio/fastio_1280.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -27,6 +27,7 @@
* Hardware Pin : 02 03 06 07 01 05 15 16 17 18 23 24 25 26 64 63 13 12 46 45 44 43 78 77 76 75 74 73 72 71 60 59 58 57 56 55 54 53 50 70 52 51 42 41 40 39 38 37 36 35 22 21 20 19 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 | 04 08 09 10 11 14 27 28 29 30 31 32 33 34 47 48 49 61 62 65 66 67 68 69 79 80 81 98 99 100
* Port : E0 E1 E4 E5 G5 E3 H3 H4 H5 H6 B4 B5 B6 B7 J1 J0 H1 H0 D3 D2 D1 D0 A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 C1 C0 D7 G2 G1 G0 L7 L6 L5 L4 L3 L2 L1 L0 B3 B2 B1 B0 F0 F1 F2 F3 F4 F5 F6 F7 K0 K1 K2 K3 K4 K5 K6 K7 | E2 E6 E7 xx xx H2 H7 G3 G4 xx xx xx xx xx D4 D5 D6 xx xx J2 J3 J4 J5 J6 J7 xx xx xx xx xx
* Logical Pin : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 73 75 76 77 74 xx xx xx xx xx
* Analog Input : 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
*
* Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
* AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
Expand Down
2 changes: 1 addition & 1 deletion Marlin/src/HAL/LINUX/spi_pins.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -24,7 +24,7 @@
#include "../../core/macros.h"
#include "../../inc/MarlinConfigPre.h"

#if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_ENABLE == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
#if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_EN == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
#define SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
// needed due to the speed and mode required for communicating with each device being different.
// This requirement can be removed if the SPI access to these devices is updated to use
Expand Down
2 changes: 1 addition & 1 deletion Marlin/src/HAL/LPC1768/spi_pins.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -23,7 +23,7 @@

#include "../../core/macros.h"

#if BOTH(SDSUPPORT, HAS_MARLINUI_U8GLIB) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_ENABLE == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
#if BOTH(SDSUPPORT, HAS_MARLINUI_U8GLIB) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_EN == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
#define SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
// needed due to the speed and mode required for communicating with each device being different.
// This requirement can be removed if the SPI access to these devices is updated to use
Expand Down
2 changes: 1 addition & 1 deletion Marlin/src/HAL/NATIVE_SIM/spi_pins.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -24,7 +24,7 @@
#include "../../core/macros.h"
#include "../../inc/MarlinConfigPre.h"

#if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_ENABLE == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
#if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_EN == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
#define SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
// needed due to the speed and mode required for communicating with each device being different.
// This requirement can be removed if the SPI access to these devices is updated to use
Expand Down
2 changes: 2 additions & 0 deletions Marlin/src/inc/SanityCheck.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -700,6 +700,8 @@
#error "DEFAULT_STEPPER_DEACTIVE_TIME is now DEFAULT_STEPPER_TIMEOUT_SEC."
#elif defined(TFT_SHARED_SPI)
#error "TFT_SHARED_SPI is now TFT_SHARED_IO."
#elif defined(LCD_PINS_ENABLE)
#error "LCD_PINS_ENABLE is now LCD_PINS_EN."
#endif

// L64xx stepper drivers have been removed
Expand Down
2 changes: 1 addition & 1 deletion Marlin/src/lcd/HD44780/marlinui_HD44780.cpp
View file
Original file line number Diff line number Diff line change
Expand Up @@ -108,7 +108,7 @@
#else

// Standard direct-connected LCD implementations
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5, LCD_PINS_D6, LCD_PINS_D7);
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_EN, LCD_PINS_D4, LCD_PINS_D5, LCD_PINS_D6, LCD_PINS_D7);

#endif

Expand Down
10 changes: 4 additions & 6 deletions Marlin/src/lcd/dogm/marlinui_DOGM.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -36,25 +36,23 @@

// RepRapWorld Graphical LCD


#if DISABLED(SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN) && (LCD_PINS_ENABLE == SD_MOSI_PIN)
#if DISABLED(SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN) && (LCD_PINS_EN == SD_MOSI_PIN)
#define U8G_CLASS U8GLIB_ST7920_128X64_4X_HAL
#define U8G_PARAM LCD_PINS_RS
#elif ENABLED(SDSUPPORT) && __SAMD21__

#define U8G_CLASS U8GLIB_ST7920_128X64_4X
#define U8G_PARAM LCD_PINS_RS
#else
#define U8G_CLASS U8GLIB_ST7920_128X64_4X
#define U8G_PARAM LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS
#define U8G_PARAM LCD_PINS_D4, LCD_PINS_EN, LCD_PINS_RS
#endif

#elif IS_U8GLIB_ST7920

// RepRap Discount Full Graphics Smart Controller
// and other variant LCDs using ST7920

#if DISABLED(SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN) && (LCD_PINS_ENABLE == SD_MOSI_PIN)
#if DISABLED(SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN) && (LCD_PINS_EN == SD_MOSI_PIN)
#define U8G_CLASS U8GLIB_ST7920_128X64_4X_HAL // 2 stripes, HW SPI (Shared with SD card. Non-standard LCD adapter on AVR.)
#define U8G_PARAM LCD_PINS_RS
#else
Expand All @@ -63,7 +61,7 @@
#else
#define U8G_CLASS U8GLIB_ST7920_128X64_RRD // Adjust stripes with PAGE_HEIGHT in ultralcd_st7920_u8glib_rrd.h
#endif
#define U8G_PARAM LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS // AVR version ignores these pin settings
#define U8G_PARAM LCD_PINS_D4, LCD_PINS_EN, LCD_PINS_RS // AVR version ignores these pin settings
// HAL version uses these pin settings
#endif

Expand Down
2 changes: 1 addition & 1 deletion Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -28,7 +28,7 @@
#include "../../HAL/shared/Delay.h"

#define ST7920_CLK_PIN LCD_PINS_D4
#define ST7920_DAT_PIN LCD_PINS_ENABLE
#define ST7920_DAT_PIN LCD_PINS_EN
#define ST7920_CS_PIN LCD_PINS_RS

//#define PAGE_HEIGHT 8 // 128 byte framebuffer
Expand Down
18 changes: 9 additions & 9 deletions Marlin/src/lcd/extui/ftdi_eve_touch_ui/pin_mappings.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -42,13 +42,13 @@
#elif ENABLED(CR10_TFT_PINMAP) // FYSETC S6 - STM32F4 - with TOUCH_UI_ULTIPANEL

#define CLCD_USE_SOFT_SPI
#define CLCD_SOFT_SPI_SCLK LCD_PINS_D4 // PORTA1 Pin 6
#define CLCD_SOFT_SPI_MOSI LCD_PINS_ENABLE // PORTC1 Pin 8
#define CLCD_SPI_CS LCD_PINS_RS // PORTA3 Pin 7
#define CLCD_SOFT_SPI_MISO 16 // PORTC0 BTN_ENC Pin 2
#define CLCD_MOD_RESET 11 // PORTD3 BTN_EN1 Pin 3
#define CLCD_AUX_0 10 // PORTD2 BTN_EN2 Pin 5
#define CLCD_AUX_1 BEEPER_PIN // PORTA4 Pin 1
#define CLCD_SOFT_SPI_SCLK LCD_PINS_D4 // PORTA1 Pin 6
#define CLCD_SOFT_SPI_MOSI LCD_PINS_EN // PORTC1 Pin 8
#define CLCD_SPI_CS LCD_PINS_RS // PORTA3 Pin 7
#define CLCD_SOFT_SPI_MISO 16 // PORTC0 BTN_ENC Pin 2
#define CLCD_MOD_RESET 11 // PORTD3 BTN_EN1 Pin 3
#define CLCD_AUX_0 10 // PORTD2 BTN_EN2 Pin 5
#define CLCD_AUX_1 BEEPER_PIN // PORTA4 Pin 1

#elif ENABLED(AO_EXP1_DEPRECATED_PINMAP)

Expand All @@ -60,7 +60,7 @@
#define CLCD_MOD_RESET LCD_PINS_D4
#define CLCD_SPI_CS LCD_PINS_D5

#define CLCD_AUX_0 LCD_PINS_ENABLE
#define CLCD_AUX_0 LCD_PINS_EN
#define CLCD_AUX_1 BTN_ENC
#define CLCD_AUX_2 BEEPER_PIN

Expand Down Expand Up @@ -93,7 +93,7 @@
* functionality over software SPI.
*/

#define CLCD_MOD_RESET LCD_PINS_ENABLE
#define CLCD_MOD_RESET LCD_PINS_EN
#define CLCD_SPI_CS LCD_PINS_D4

#define CLCD_USE_SOFT_SPI
Expand Down
2 changes: 1 addition & 1 deletion Marlin/src/pins/esp32/pins_MKS_TINYBEE.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -158,7 +158,7 @@

#if HAS_WIRED_LCD
#define BEEPER_PIN EXP1_01_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_EN EXP1_03_PIN
#define LCD_PINS_RS EXP1_04_PIN
#define BTN_ENC EXP1_02_PIN
#define BTN_EN1 EXP2_03_PIN
Expand Down
2 changes: 1 addition & 1 deletion Marlin/src/pins/esp32/pins_MRR_ESPE.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -126,7 +126,7 @@
#if HAS_WIRED_LCD

#define LCD_PINS_RS 13
#define LCD_PINS_ENABLE 17
#define LCD_PINS_EN 17
#define LCD_PINS_D4 16

#if ENABLED(CR10_STOCKDISPLAY)
Expand Down
2 changes: 1 addition & 1 deletion Marlin/src/pins/esp32/pins_PANDA_common.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -123,6 +123,6 @@
#define BTN_EN2 EXP2_05_PIN

#define LCD_PINS_RS EXP1_04_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_EN EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#endif
10 changes: 5 additions & 5 deletions Marlin/src/pins/linux/pins_RAMPS_LINUX.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -474,13 +474,13 @@
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)

#define LCD_PINS_RS 49 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_EN 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock

#elif BOTH(IS_NEWPANEL, PANEL_ONE)

#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42
#define LCD_PINS_EN 42
#define LCD_PINS_D4 65
#define LCD_PINS_D5 66
#define LCD_PINS_D6 44
Expand All @@ -491,7 +491,7 @@
#if ENABLED(CR10_STOCKDISPLAY)

#define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 29
#define LCD_PINS_EN 29
#define LCD_PINS_D4 25

#if !IS_NEWPANEL
Expand All @@ -501,7 +501,7 @@
#elif ENABLED(ZONESTAR_LCD)

#define LCD_PINS_RS 64
#define LCD_PINS_ENABLE 44
#define LCD_PINS_EN 44
#define LCD_PINS_D4 63
#define LCD_PINS_D5 40
#define LCD_PINS_D6 42
Expand All @@ -519,7 +519,7 @@
#define DOGLCD_A0 LCD_PINS_DC
#else
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_EN 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
Expand Down
4 changes: 2 additions & 2 deletions Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -127,7 +127,7 @@

#define SD_DETECT_PIN P0_27 // EXP2-7
#define LCD_PINS_RS P0_16 // EXP1-4
#define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3
#define LCD_PINS_EN P0_18 // (MOSI) EXP1-3
#define LCD_PINS_D4 P0_15 // (SCK) EXP1-5

#if BOTH(HAS_MARLINUI_HD44780, IS_RRD_SC)
Expand Down Expand Up @@ -159,7 +159,7 @@
*
* There are 6 PWMS. Each PWM can be assigned to one of two pins.
*
* PWM1.1 P0_18 LCD_PINS_ENABLE
* PWM1.1 P0_18 LCD_PINS_EN
* PWM1.1 P2_0 X_STEP_PIN
* PWM1.2 P1_20 <none>
* PWM1.2 P2_1 Y_STEP_PIN
Expand Down
4 changes: 2 additions & 2 deletions Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -104,7 +104,7 @@

#define SD_DETECT_PIN P0_27 // EXP2-7
#define LCD_PINS_RS P0_16 // EXP1-4
#define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3
#define LCD_PINS_EN P0_18 // (MOSI) EXP1-3
#define LCD_PINS_D4 P0_15 // (SCK) EXP1-5

#if BOTH(HAS_MARLINUI_HD44780, IS_RRD_SC)
Expand Down Expand Up @@ -138,7 +138,7 @@
*
* There are 6 PWMS. Each PWM can be assigned to one of two pins.
*
* PWM1.1 P0_18 LCD_PINS_ENABLE
* PWM1.1 P0_18 LCD_PINS_EN
* PWM1.1 P2_0 X_STEP_PIN
* PWM1.2 P1_20 <none>
* PWM1.2 P2_1 Y_STEP_PIN
Expand Down
2 changes: 1 addition & 1 deletion Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -112,7 +112,7 @@

#define LCD_SDSS EXP2_04_PIN
#define LCD_PINS_RS EXP1_04_PIN
#define LCD_PINS_ENABLE EXP2_06_PIN
#define LCD_PINS_EN EXP2_06_PIN
#define LCD_PINS_D4 EXP2_02_PIN

#if ENABLED(MKS_MINI_12864)
Expand Down
6 changes: 3 additions & 3 deletions Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -254,7 +254,7 @@
#define BTN_EN2 EXP1_07_PIN
#define BTN_ENC EXP1_03_PIN

#define LCD_PINS_ENABLE EXP1_06_PIN
#define LCD_PINS_EN EXP1_06_PIN
#define LCD_PINS_D4 EXP1_04_PIN

#elif ENABLED(WYH_L12864)
Expand Down Expand Up @@ -299,7 +299,7 @@
#define BTN_EN2 EXP1_05_PIN
#define BTN_ENC EXP1_02_PIN // (58) open-drain

#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_EN EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN

#elif HAS_ADC_BUTTONS
Expand Down Expand Up @@ -385,7 +385,7 @@
#define BTN_EN2 EXP2_05_PIN // (33) J3-4 & AUX-4
#define BTN_ENC EXP1_02_PIN // (58) open-drain

#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_EN EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN

#define LCD_SDSS EXP2_04_PIN // (16) J3-7 & AUX-4
Expand Down
8 changes: 4 additions & 4 deletions Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -316,7 +316,7 @@
#define BTN_EN2 EXP1_07_PIN
#define BTN_ENC EXP1_01_PIN

#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_EN EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#define BEEPER_PIN EXP1_08_PIN

Expand Down Expand Up @@ -352,7 +352,7 @@
#define BTN_EN2 EXP1_07_PIN
#define BTN_ENC EXP1_03_PIN

#define LCD_PINS_ENABLE EXP1_06_PIN
#define LCD_PINS_EN EXP1_06_PIN
#define LCD_PINS_D4 EXP1_04_PIN

#define BEEPER_PIN EXP1_01_PIN
Expand All @@ -364,7 +364,7 @@
#define BTN_EN2 EXP1_05_PIN
#define BTN_ENC EXP1_02_PIN

#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_EN EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN

#elif ENABLED(ENDER2_STOCKDISPLAY)
Expand Down Expand Up @@ -429,7 +429,7 @@
#define BTN_EN1 EXP2_03_PIN // (31) J3-2 & AUX-4
#define BTN_EN2 EXP2_05_PIN // (33) J3-4 & AUX-4

#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_EN EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN

#define LCD_SDSS EXP2_04_PIN // (16) J3-7 & AUX-4
Expand Down
2 changes: 1 addition & 1 deletion Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -141,7 +141,7 @@
#define BTN_EN2 P1_24
#define BTN_ENC P1_25
#define LCD_PINS_RS P0_20
#define LCD_PINS_ENABLE P0_21
#define LCD_PINS_EN P0_21
#define LCD_PINS_D4 P2_11
#define LCD_PINS_D5 P0_22
#define LCD_PINS_D6 P1_29
Expand Down
6 changes: 3 additions & 3 deletions Marlin/src/pins/lpc1768/pins_MKS_SBASE.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -238,7 +238,7 @@
#define BTN_EN2 P3_25 // EXP2.3
#define LCD_PINS_RS P0_16 // EXP1.4
#define LCD_SDSS P0_28 // EXP2.4
#define LCD_PINS_ENABLE P0_18 // EXP1.3
#define LCD_PINS_EN P0_18 // EXP1.3
#define LCD_PINS_D4 P0_15 // EXP1.5
#if EITHER(VIKI2, miniVIKI)
#define DOGLCD_SCK SD_SCK_PIN
Expand All @@ -257,8 +257,8 @@
* Pins 6, 7 & 8 on EXP2 are no connects. That means a second special
* cable will be needed if the RGB LEDs are to be active.
*/
#define DOGLCD_CS LCD_PINS_ENABLE // EXP1.3 (LCD_EN on FYSETC schematic)
#define DOGLCD_A0 LCD_PINS_RS // EXP1.4 (LCD_A0 on FYSETC schematic)
#define DOGLCD_CS P0_18 // EXP1.3 (LCD_EN on FYSETC schematic)
#define DOGLCD_A0 P0_16 // EXP1.4 (LCD_A0 on FYSETC schematic)
#define DOGLCD_SCK P2_11 // J8-5 (SCK on FYSETC schematic)
#define DOGLCD_MOSI P4_28 // J8-6 (MOSI on FYSETC schematic)

Expand Down
6 changes: 3 additions & 3 deletions Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -287,7 +287,7 @@
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_05_PIN

#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_EN EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN

#elif HAS_SPI_TFT // Config for Classic UI (emulated DOGM) and Color UI
Expand All @@ -306,7 +306,7 @@
#define TOUCH_BUTTONS_HW_SPI_DEVICE 2

// Disable any LCD related PINs config
#define LCD_PINS_ENABLE -1
#define LCD_PINS_EN -1
#define LCD_PINS_RS -1

#ifndef TFT_BUFFER_SIZE
Expand Down Expand Up @@ -351,7 +351,7 @@

#define LCD_PINS_RS EXP1_04_PIN

#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_EN EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN

#if ENABLED(FYSETC_MINI_12864)
Expand Down
4 changes: 2 additions & 2 deletions Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -301,7 +301,7 @@
#define BTN_ENC P3_25 // J3-4 & AUX-4

#define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS)
#define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI)
#define LCD_PINS_EN P0_18 // J3-10 & AUX-3 (SID, MOSI)
#define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK)

#elif ENABLED(ZONESTAR_LCD)
Expand Down Expand Up @@ -394,7 +394,7 @@
#endif

#define LCD_BACKLIGHT_PIN P0_16 //(16) J3-7 & AUX-4 - only used on DOGLCD controllers
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
#define LCD_PINS_EN P0_18 // (51) (MOSI) J3-10 & AUX-3
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
#if IS_ULTIPANEL
#define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
Expand Down
2 changes: 1 addition & 1 deletion Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -98,7 +98,7 @@

#if IS_RRD_FG_SC
#define LCD_PINS_RS P0_16
#define LCD_PINS_ENABLE P0_18
#define LCD_PINS_EN P0_18
#define LCD_PINS_D4 P0_15
#define LCD_PINS_D5 P1_00
#define LCD_PINS_D6 P1_01
Expand Down
Loading

0 comments on commit cd5dc72

Please sign in to comment.