apply formatting and patches

MarlinFirmware · May 12, 2022 · c52db9b · c52db9b
1 parent d8fce13
commit c52db9b
Show file tree

Hide file tree

Showing 4 changed files with 77 additions and 95 deletions.
diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V24S1.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V24S1.h
@@ -22,7 +22,7 @@
 #pragma once
 
 /**
- * Creality v2.4.S1 (STM32F103RE / STM32F103RC) v101 as found in the Ender 7 board pin assignments
+ * Creality v2.4.S1 (STM32F103RE / STM32F103RC) v101 as found in the Ender 7
  */
 
 #define BOARD_INFO_NAME      "Creality v2.4.S1 V101"

diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V25S1.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V25S1.h
@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -22,40 +22,38 @@
 #pragma once
 
 /**
- * Creality v2.4.S1 (STM32F103RE / STM32F103RC) v101 as found in the Ender 7 board pin assignments
+ * Creality v2.5.S1 (STM32F103RE / STM32F103RC) v101 as found in the Ender 7
  */
 
+#include "env_validate.h"
+
+#if HAS_MULTI_HOTEND || E_STEPPERS > 1
+  #error "Creality V2.5.S1 only supports one hotend / E-stepper. Comment out this line to continue."
+#endif
+
 #define BOARD_INFO_NAME      "Creality v2.5.S1"
 #define DEFAULT_MACHINE_NAME "Creality3D"
 
+//
+// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
+//
+#define DISABLE_DEBUG
+
 //
 // EEPROM
 //
 #if NO_EEPROM_SELECTED
-  // FLASH
+  #define IIC_BL24CXX_EEPROM                      // EEPROM on I2C-0
+  //#define SDCARD_EEPROM_EMULATION
   //#define FLASH_EEPROM_EMULATION
+#endif
 
-  // I2C
-  #define IIC_BL24CXX_EEPROM                      // EEPROM on I2C-0 used only for display settings
-  #if ENABLED(IIC_BL24CXX_EEPROM)
-    #define IIC_EEPROM_SDA                  PA11
-    #define IIC_EEPROM_SCL                  PA12
-    #define MARLIN_EEPROM_SIZE 0x800              // 2Kb (24C16)
-  #else
-    #define SDCARD_EEPROM_EMULATION               // SD EEPROM until all EEPROM is BL24CXX
-    #define MARLIN_EEPROM_SIZE 0x800              // 2Kb
-  #endif
-
-  // SPI
-  //#define SPI_EEPROM                            // EEPROM on SPI-0
-  //#define SPI_CHAN_EEPROM1  ?
-  //#define SPI_EEPROM1_CS    ?
-
-  // 2K EEPROM
-  //#define SPI_EEPROM2_CS    ?
-
-  // 32Mb FLASH
-  //#define SPI_FLASH_CS      ?
+#if ENABLED(IIC_BL24CXX_EEPROM)
+  #define IIC_EEPROM_SDA                  PA11
+  #define IIC_EEPROM_SCL                  PA12
+  #define MARLIN_EEPROM_SIZE             0x800  // 2K (24C16)
+#elif EITHER(SDCARD_EEPROM_EMULATION, FLASH_EEPROM_EMULATION)
+  #define MARLIN_EEPROM_SIZE             0x800  // 2K
 #endif
 
 //
@@ -64,51 +62,45 @@
 #define X_STOP_PIN                          PC4
 #define Y_STOP_PIN                          PC5
 
-//
-// Servos
-//
 #if ENABLED(BLTOUCH)
-  #define Z_MIN_PROBE_PIN                     PC15   // BLTouch IN PIN
-  #define SERVO0_PIN                          PC14   // BLTouch OUT PIN
-  #define Z_MIN_PIN -1
-#elif ENABLED(PROBE_ACTIVATION_SWITCH)
-  #define Z_MIN_PIN                           PC15
-  #define PROBE_TARE_PIN                      PC14
-  #define PROBE_ACTIVATION_SWITCH_PIN         PB2
+  #define Z_STOP_PIN                        -1
+  #define SERVO0_PIN                        PC14  // BLTouch OUT PIN
+  #ifndef Z_MIN_PROBE_PIN
+    #define Z_MIN_PROBE_PIN                 PC15  // BLTouch IN PIN
+  #endif
 #else
-  #define Z_MIN_PIN                           PC15
+  #define Z_STOP_PIN                        PC15
+  #if ENABLED(PROBE_ACTIVATION_SWITCH)
+    #define PROBE_TARE_PIN                  PC14
+    #define PROBE_ACTIVATION_SWITCH_PIN     PB2
+  #endif
 #endif
 
 //
 // Filament Runout Sensor
 //
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  #define FIL_RUNOUT_PIN                      PA15   // "Pulled-high"
+  #define FIL_RUNOUT_PIN                    PA15  // "Pulled-high"
 #endif
 
 //
 // Steppers
 //
-#define X_ENABLE_PIN                        PC3
 #define X_STEP_PIN                          PB8
 #define X_DIR_PIN                           PB7
+#define X_ENABLE_PIN                        PC3
 
-#define Y_ENABLE_PIN                        PC3
 #define Y_STEP_PIN                          PB6
 #define Y_DIR_PIN                           PB5
+#define Y_ENABLE_PIN                X_ENABLE_PIN
 
-#define Z_ENABLE_PIN                        PC3
 #define Z_STEP_PIN                          PB4
 #define Z_DIR_PIN                           PB3
+#define Z_ENABLE_PIN                X_ENABLE_PIN
 
-#define E0_ENABLE_PIN                       PC3
 #define E0_STEP_PIN                         PC2
 #define E0_DIR_PIN                          PB9
-
-//
-// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
-//
-#define DISABLE_DEBUG
+#define E0_ENABLE_PIN               X_ENABLE_PIN
 
 //
 // Temperature Sensors
@@ -124,34 +116,37 @@
 
 #define FAN_PIN                             PB15  // FAN
 #ifndef E0_AUTO_FAN_PIN
-  #define E0_AUTO_FAN_PIN                     PC13  // FAN
+  #define E0_AUTO_FAN_PIN                   PC13  // FAN
 #endif
-#define FAN_SOFT_PWM
+#define FAN_SOFT_PWM_REQUIRED
 
 //
 // SD Card
 //
 #define SD_DETECT_PIN                       PC7
 #define SDCARD_CONNECTION                ONBOARD
 #define ON_BOARD_SPI_DEVICE                    1
-#define ONBOARD_SD_CS_PIN                   PC12   // SDSS
+#define ONBOARD_SD_CS_PIN                   PC12  // SDSS
 #define SDIO_SUPPORT
-#define NO_SD_HOST_DRIVE                           // This board's SD is only seen by the printer
+#define NO_SD_HOST_DRIVE                          // This board's SD is only seen by the printer
 
-#define CASE_LIGHT_PIN     PA7
+//
+// Misc. Functions
+//
+#define CASE_LIGHT_PIN                      PA7
 
 //
 // Suicide Power
 //
-#define PS_ON_PIN       PA0
-#define MOTOR_CIRCUIT_PIN   PA1
+#define PS_ON_PIN                           PA0
+#define MOTOR_CIRCUIT_PIN                   PA1
 
 //
 // Motor Protect
 //
-#define MOTOR_PROTECT_PIN   PC0
+#define MOTOR_PROTECT_PIN                   PC0
 
 //
-// WiFI Reset
+// WiFi Reset
 //
-#define RESET_WIFI_PIN      PB12
+#define RESET_WIFI_PIN                      PB12
diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h
@@ -40,6 +40,11 @@
 
 #define BOARD_NO_NATIVE_USB
 
+//
+// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
+//
+#define DISABLE_DEBUG
+
 //
 // EEPROM
 //
@@ -122,11 +127,6 @@
 #endif
 #define E0_ENABLE_PIN               X_ENABLE_PIN
 
-//
-// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
-//
-#define DISABLE_DEBUG
-
 //
 // Temperature Sensors
 //

diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h
@@ -40,34 +40,24 @@
 
 #define BOARD_NO_NATIVE_USB
 
+//
+// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
+//
+#define DISABLE_DEBUG
+
 //
 // EEPROM
 //
 #if NO_EEPROM_SELECTED
-  // FLASH
-  //#define FLASH_EEPROM_EMULATION
-
-  // I2C
-  #define IIC_BL24CXX_EEPROM                      // EEPROM on I2C-0 used only for display settings
-  #if ENABLED(IIC_BL24CXX_EEPROM)
-    #define IIC_EEPROM_SDA                  PA11
-    #define IIC_EEPROM_SCL                  PA12
-    #define MARLIN_EEPROM_SIZE             0x800  // 2K (24C16)
-  #else
-    #define SDCARD_EEPROM_EMULATION               // SD EEPROM until all EEPROM is BL24CXX
-    #define MARLIN_EEPROM_SIZE             0x800  // 2K
-  #endif
-
-  // SPI
-  //#define SPI_EEPROM                            // EEPROM on SPI-0
-  //#define SPI_CHAN_EEPROM1  ?
-  //#define SPI_EEPROM1_CS_PIN    ?
-
-  // 2K EEPROM
-  //#define SPI_EEPROM2_CS_PIN    ?
-
-  // 32Mb FLASH
-  //#define SPI_FLASH_CS_PIN  ?
+  #define IIC_BL24CXX_EEPROM                      // EEPROM on I2C-0
+#endif
+#if ENABLED(IIC_BL24CXX_EEPROM)
+  #define IIC_EEPROM_SDA                    PA11
+  #define IIC_EEPROM_SCL                    PA12
+  #define MARLIN_EEPROM_SIZE               0x800  // 2K (24C16)
+#else
+  #define SDCARD_EEPROM_EMULATION                 // SD EEPROM until all EEPROM is BL24CXX
+  #define MARLIN_EEPROM_SIZE               0x800  // 2K
 #endif
 
 //
@@ -82,7 +72,9 @@
 #define Y_STOP_PIN                          PA7
 #define Z_STOP_PIN                          PA5
 
-#define Z_MIN_PROBE_PIN                     PA5   // BLTouch IN
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN                   PA5   // BLTouch IN
+#endif
 
 //
 // Filament Runout Sensor
@@ -94,42 +86,37 @@
 //
 // Steppers
 //
-#define X_ENABLE_PIN                        PC3
 #ifndef X_STEP_PIN
   #define X_STEP_PIN                        PC2
 #endif
 #ifndef X_DIR_PIN
   #define X_DIR_PIN                         PB9
 #endif
+#define X_ENABLE_PIN                        PC3
 
-#define Y_ENABLE_PIN                        PC3
 #ifndef Y_STEP_PIN
   #define Y_STEP_PIN                        PB8
 #endif
 #ifndef Y_DIR_PIN
   #define Y_DIR_PIN                         PB7
 #endif
+#define Y_ENABLE_PIN                X_ENABLE_PIN
 
-#define Z_ENABLE_PIN                        PC3
 #ifndef Z_STEP_PIN
   #define Z_STEP_PIN                        PB6
 #endif
 #ifndef Z_DIR_PIN
   #define Z_DIR_PIN                         PB5
 #endif
+#define Z_ENABLE_PIN                X_ENABLE_PIN
 
-#define E0_ENABLE_PIN                       PC3
 #ifndef E0_STEP_PIN
   #define E0_STEP_PIN                       PB4
 #endif
 #ifndef E0_DIR_PIN
   #define E0_DIR_PIN                        PB3
 #endif
-
-//
-// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
-//
-#define DISABLE_DEBUG
+#define E0_ENABLE_PIN               X_ENABLE_PIN
 
 //
 // Temperature Sensors