✨ Panowin Cutlass / Bardo (F1 / Trinus) (#25663)

MarlinFirmware · Apr 20, 2023 · 91cce2a · 91cce2a
1 parent de7726c
commit 91cce2a
Show file tree

Hide file tree

Showing 10 changed files with 183 additions and 6 deletions.
diff --git a/Marlin/src/HAL/AVR/pinsDebug.h b/Marlin/src/HAL/AVR/pinsDebug.h
@@ -90,7 +90,6 @@ void PRINT_ARRAY_NAME(uint8_t x) {
 
 #define GET_ARRAY_IS_DIGITAL(x)   pgm_read_byte(&pin_array[x].is_digital)
 
-
 #if defined(__AVR_ATmega1284P__)  // 1284 IDE extensions set this to the number of
   #undef NUM_DIGITAL_PINS         // digital only pins while all other CPUs have it
   #define NUM_DIGITAL_PINS 32     // set to digital only + digital/analog

diff --git a/Marlin/src/HAL/AVR/pinsDebug_plus_70.h b/Marlin/src/HAL/AVR/pinsDebug_plus_70.h
@@ -231,7 +231,6 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM_plus_70[] = {
 
 #define digitalPinToBitMask_plus_70(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM_plus_70 + (P) ) )
 
-
 const uint8_t PROGMEM digital_pin_to_timer_PGM_plus_70[] = {
   // TIMERS
   // ------------------------

diff --git a/Marlin/src/HAL/TEENSY35_36/pinsDebug.h b/Marlin/src/HAL/TEENSY35_36/pinsDebug.h
@@ -77,7 +77,7 @@ void HAL_analog_pin_state(char buffer[], int8_t pin) {
  * Print a pin's PWM status.
  * Return true if it's currently a PWM pin.
  */
-bool HAL_pwm_status(int8_t pin) {
+bool HAL_pwm_status(const int8_t pin) {
   char buffer[20];   // for the sprintf statements
   switch (pin) {
     FTM_CASE(0,0);

diff --git a/Marlin/src/HAL/TEENSY40_41/pinsDebug.h b/Marlin/src/HAL/TEENSY40_41/pinsDebug.h
@@ -136,7 +136,7 @@ void HAL_analog_pin_state(char buffer[], int8_t pin) {
  * Print a pin's PWM status.
  * Return true if it's currently a PWM pin.
  */
-bool HAL_pwm_status(int8_t pin) {
+bool HAL_pwm_status(const int8_t pin) {
   char buffer[20];   // for the sprintf statements
   const struct pwm_pin_info_struct *info;
 

diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h
@@ -118,6 +118,8 @@
 #define BOARD_LONGER3D_LKx_PRO        1162  // Longer LKx PRO / Alfawise Uxx Pro (PRO version)
 #define BOARD_ZRIB_V53                1163  // Zonestar zrib V5.3 (Chinese RAMPS replica)
 #define BOARD_PXMALION_CORE_I3        1164  // Pxmalion Core I3
+#define BOARD_PANOWIN_CUTLASS         1165  // Panowin Cutlass (as found in the Panowin F1)
+#define BOARD_KODAMA_BARDO            1166  // Kodama Bardo V1.x (as found in the Kodama Trinus)
 
 //
 // RAMBo and derivatives

diff --git a/Marlin/src/gcode/control/M42.cpp b/Marlin/src/gcode/control/M42.cpp
@@ -53,6 +53,7 @@ void protected_pin_err() {
  *  I       Flag to ignore Marlin's pin protection
  *
  *  T<mode> Pin mode: 0=INPUT  1=OUTPUT  2=INPUT_PULLUP  3=INPUT_PULLDOWN
+ *                    4=INPUT_ANALOG  5=OUTPUT_OPEN_DRAIN
  */
 void GcodeSuite::M42() {
   const int pin_index = PARSED_PIN_INDEX('P', GET_PIN_MAP_INDEX(LED_PIN));
@@ -119,7 +120,7 @@ void GcodeSuite::M42() {
   }
 
   // An OUTPUT_OPEN_DRAIN should not be changed to normal OUTPUT (STM32)
-  // Use M42 Px M1/5 S0/1 to set the output type and then set value
+  // Use M42 Px T1/5 S0/1 to set the output type and then set value
   #ifndef OUTPUT_OPEN_DRAIN
     pinMode(pin, OUTPUT);
   #endif

diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
@@ -484,8 +484,13 @@
   #endif
 #endif
 
+// Serial Controllers require LCD_SERIAL_PORT
+#if ANY(HAS_DGUS_LCD, MALYAN_LCD, ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON, NEXTION_TFT)
+  #define LCD_NEEDS_SERIAL_PORT 1
+#endif
+
 // Extensible UI serial touch screens. (See src/lcd/extui)
-#if ANY(HAS_DGUS_LCD, MALYAN_LCD, TOUCH_UI_FTDI_EVE, ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON, ANYCUBIC_LCD_VYPER, NEXTION_TFT)
+#if EITHER(LCD_NEEDS_SERIAL_PORT, TOUCH_UI_FTDI_EVE)
   #define IS_EXTUI 1
   #define EXTENSIBLE_UI
 #endif

diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h
@@ -205,6 +205,10 @@
   #include "ramps/pins_LONGER3D_LKx_PRO.h"      // ATmega2560                             env:mega2560
 #elif MB(PXMALION_CORE_I3)
   #include "ramps/pins_PXMALION_CORE_I3.h"      // ATmega2560                             env:mega2560
+#elif MB(PANOWIN_CUTLASS)
+  #include "ramps/pins_PANOWIN_CUTLASS.h"       // ATmega2560                             env:mega2560ext
+#elif MB(KODAMA_BARDO)
+  #include "ramps/pins_KODAMA_BARDO.h"          // ATmega2560                             env:mega2560ext
 
 //
 // RAMBo and derivatives

diff --git a/Marlin/src/pins/ramps/pins_KODAMA_BARDO.h b/Marlin/src/pins/ramps/pins_KODAMA_BARDO.h
@@ -0,0 +1,34 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Kodama Bardo V1.x as found in the Kodama Trinus (MEGA2560) board pin assignments
+ *
+ * Ported from https://github.com/sambuls/MarlinOnTrinus
+ * Board photo https://imgur.com/a/JbQH5SI
+ */
+
+#define BOARD_NAME "Kodama Bardo V1.x"
+#define DEFAULT_MACHINE_NAME "Kodama Trinus"
+
+#include "pins_PANOWIN_CUTLASS.h"
diff --git a/Marlin/src/pins/ramps/pins_PANOWIN_CUTLASS.h b/Marlin/src/pins/ramps/pins_PANOWIN_CUTLASS.h
@@ -0,0 +1,133 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Panowin V?.? as found in the Panowin F1 (MEGA2560) board pin assignments
+ *
+ * Ported from https://github.com/sambuls/MarlinOnTrinus
+ * Board photo https://imgur.com/a/xvol1Bo
+ */
+
+#include "env_validate.h"
+
+#ifndef BOARD_NAME
+  #define BOARD_NAME "Panowin Cutlass"
+#endif
+
+#ifndef DEFAULT_MACHINE_NAME
+  #define DEFAULT_MACHINE_NAME "Panowin F1"
+#endif
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                            71  // G3
+#define Y_STOP_PIN                            85  // H7
+#define Z_STOP_PIN                            13  // B7
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            38  // D7
+#define X_DIR_PIN                             83
+#define X_ENABLE_PIN                          82
+
+#define Y_STEP_PIN                            37
+#define Y_DIR_PIN                             40
+#define Y_ENABLE_PIN                          41
+
+#define Z_STEP_PIN                            30  // C7
+#define Z_DIR_PIN                             32  // C5
+#define Z_ENABLE_PIN                          34  // C3
+
+#define E0_STEP_PIN                           42
+#define E0_DIR_PIN                            43
+#define E0_ENABLE_PIN                         44
+
+// Microstepping mode pins
+#define X_MS1_PIN                             19  // D2
+#define X_MS2_PIN                             18  // D3
+#define X_MS3_PIN                             81  // D4
+
+#define Y_MS1_PIN                             19  // D2
+#define Y_MS2_PIN                             18  // D3
+#define Y_MS3_PIN                             81  // D4
+
+#define Z_MS1_PIN                             73  // J3
+#define Z_MS2_PIN                             75  // J4
+#define Z_MS3_PIN                             76  // J5
+
+#define E0_MS1_PIN                            46  // L3
+#define E0_MS2_PIN                            47  // L2
+#define E0_MS3_PIN                            45  // L4
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                            12  // Analog Input
+#define TEMP_BED_PIN                          14  // Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                           9  // H6
+#define HEATER_BED_PIN                         8
+#define FAN0_PIN                              62  // K0
+#define FAN_SOFT_PWM_REQUIRED
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#if HAS_CUTTER
+  #define SPINDLE_LASER_ENA_PIN               74  // J7
+#endif
+
+//
+// Serial LCD
+//
+#if LCD_NEEDS_SERIAL_PORT && !defined(LCD_SERIAL_PORT)
+  #define LCD_SERIAL_PORT                      2  // D16 H1 (TX2), D17 H0 (RX2)
+#endif
+
+//
+// SD Card
+//
+#define SD_DETECT_PIN                         28  // A6 Onboard SD
+
+//
+// Misc. Functions
+//
+#define BEEPER_PIN                            24  // A2
+
+//
+// Onboard (bright!) RGB LED
+//
+#ifndef RGB_LED_R_PIN
+  #define RGB_LED_R_PIN                       64  // K2
+#endif
+#ifndef RGB_LED_G_PIN
+  #define RGB_LED_G_PIN                       65  // K3
+#endif
+#ifndef RGB_LED_B_PIN
+  #define RGB_LED_B_PIN                       63  // K1
+#endif