🎨 More lowercase (ProUI)

Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp

@@ -753,7 +753,7 @@ void unified_bed_leveling::shift_mesh_height() {
 
     TERN_(HAS_MARLINUI_MENU, ui.capture());
     TERN_(EXTENSIBLE_UI, ExtUI::onLevelingStart());
-    TERN_(DWIN_LCD_PROUI, DWIN_LevelingStart());
+    TERN_(DWIN_LCD_PROUI, dwinLevelingStart());
 
     save_ubl_active_state_and_disable();  // No bed level correction so only raw data is obtained
     grid_count_t count = GRID_MAX_POINTS;
@@ -814,7 +814,7 @@ void unified_bed_leveling::shift_mesh_height() {
     );
 
     TERN_(EXTENSIBLE_UI, ExtUI::onLevelingDone());
-    TERN_(DWIN_LCD_PROUI, DWIN_LevelingDone());
+    TERN_(DWIN_LCD_PROUI, dwinLevelingDone());
   }
 
 #endif // HAS_BED_PROBE

Marlin/src/feature/runout.cpp

@@ -88,7 +88,7 @@ void event_filament_runout(const uint8_t extruder) {
   #endif
 
   TERN_(EXTENSIBLE_UI, ExtUI::onFilamentRunout(ExtUI::getTool(extruder)));
-  TERN_(DWIN_LCD_PROUI, DWIN_FilamentRunout(extruder));
+  TERN_(DWIN_LCD_PROUI, dwinFilamentRunout(extruder));
 
   #if ANY(HOST_PROMPT_SUPPORT, HOST_ACTION_COMMANDS, MULTI_FILAMENT_SENSOR)
     const char tool = '0' + TERN0(MULTI_FILAMENT_SENSOR, extruder);

Marlin/src/gcode/bedlevel/abl/G29.cpp

@@ -426,7 +426,7 @@ G29_TYPE GcodeSuite::G29() {
       if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("> 3-point Leveling");
       points[0].z = points[1].z = points[2].z = 0;  // Probe at 3 arbitrary points
     #elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
-      TERN_(DWIN_LCD_PROUI, DWIN_LevelingStart());
+      TERN_(DWIN_LCD_PROUI, dwinLevelingStart());
     #endif
 
     TERN_(EXTENSIBLE_UI, ExtUI::onLevelingStart());
@@ -437,7 +437,7 @@ G29_TYPE GcodeSuite::G29() {
       #if ENABLED(PREHEAT_BEFORE_LEVELING)
         if (!abl.dryrun) probe.preheat_for_probing(LEVELING_NOZZLE_TEMP,
           #if ALL(DWIN_LCD_PROUI, HAS_HEATED_BED)
-            HMI_data.BedLevT
+            hmiData.BedLevT
           #else
             LEVELING_BED_TEMP
           #endif

Marlin/src/gcode/bedlevel/mbl/G29.cpp

@@ -143,7 +143,7 @@ void GcodeSuite::G29() {
         queue.inject(F("G29S2"));
 
         TERN_(EXTENSIBLE_UI, ExtUI::onLevelingStart());
-        TERN_(DWIN_LCD_PROUI, DWIN_LevelingStart());
+        TERN_(DWIN_LCD_PROUI, dwinLevelingStart());
 
         return;
       }
@@ -169,7 +169,7 @@ void GcodeSuite::G29() {
         // Save Z for the previous mesh position
         bedlevel.set_zigzag_z(mbl_probe_index - 1, current_position.z);
         TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(ix, iy, current_position.z));
-        TERN_(DWIN_LCD_PROUI, DWIN_MeshUpdate(_MIN(mbl_probe_index, GRID_MAX_POINTS), int(GRID_MAX_POINTS), current_position.z));
+        TERN_(DWIN_LCD_PROUI, dwinMeshUpdate(_MIN(mbl_probe_index, GRID_MAX_POINTS), int(GRID_MAX_POINTS), current_position.z));
         SET_SOFT_ENDSTOP_LOOSE(false);
       }
       // If there's another point to sample, move there with optional lift.
@@ -236,7 +236,7 @@ void GcodeSuite::G29() {
       if (parser.seenval('Z')) {
         bedlevel.z_values[ix][iy] = parser.value_linear_units();
         TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(ix, iy, bedlevel.z_values[ix][iy]));
-        TERN_(DWIN_LCD_PROUI, DWIN_MeshUpdate(ix, iy, bedlevel.z_values[ix][iy]));
+        TERN_(DWIN_LCD_PROUI, dwinMeshUpdate(ix, iy, bedlevel.z_values[ix][iy]));
       }
       else
         return echo_not_entered('Z');

Marlin/src/gcode/bedlevel/ubl/M421.cpp

@@ -66,10 +66,10 @@ void GcodeSuite::M421() {
   else if (!WITHIN(ij.x, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(ij.y, 0, GRID_MAX_POINTS_Y - 1))
     SERIAL_ERROR_MSG(STR_ERR_MESH_XY);
   else {
-    float &zval = bedlevel.z_values[ij.x][ij.y];                               // Altering this Mesh Point
+    float &zval = bedlevel.z_values[ij.x][ij.y];                          // Altering this Mesh Point
     zval = hasN ? NAN : parser.value_linear_units() + (hasQ ? zval : 0);  // N=NAN, Z=NEWVAL, or Q=ADDVAL
     TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(ij.x, ij.y, zval));          // Ping ExtUI in case it's showing the mesh
-    TERN_(DWIN_LCD_PROUI, DWIN_MeshUpdate(ij.x, ij.y, zval));
+    TERN_(DWIN_LCD_PROUI, dwinMeshUpdate(ij.x, ij.y, zval));
   }
 }
 

Marlin/src/gcode/config/M302.cpp

@@ -51,7 +51,7 @@ void GcodeSuite::M302() {
   if (seen_S) {
     thermalManager.extrude_min_temp = parser.value_celsius();
     thermalManager.allow_cold_extrude = (thermalManager.extrude_min_temp == 0);
-    TERN_(DWIN_LCD_PROUI, HMI_data.ExtMinT = thermalManager.extrude_min_temp);
+    TERN_(DWIN_LCD_PROUI, hmiData.ExtMinT = thermalManager.extrude_min_temp);
   }
 
   if (parser.seen('P'))

Marlin/src/gcode/control/M997.cpp

@@ -33,7 +33,7 @@
  */
 void GcodeSuite::M997() {
 
-  TERN_(DWIN_LCD_PROUI, DWIN_RebootScreen());
+  TERN_(DWIN_LCD_PROUI, dwinRebootScreen());
 
   flashFirmware(parser.intval('S'));
 

Marlin/src/gcode/lcd/M0_M1.cpp

@@ -73,9 +73,9 @@ void GcodeSuite::M0_M1() {
       ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_USERWAIT));
   #elif ENABLED(DWIN_LCD_PROUI)
     if (parser.string_arg)
-      DWIN_Popup_Confirm(ICON_BLTouch, parser.string_arg, GET_TEXT_F(MSG_USERWAIT));
+      dwinPopupConfirm(ICON_BLTouch, parser.string_arg, GET_TEXT_F(MSG_USERWAIT));
     else
-      DWIN_Popup_Confirm(ICON_BLTouch, GET_TEXT_F(MSG_STOPPED), GET_TEXT_F(MSG_USERWAIT));
+      dwinPopupConfirm(ICON_BLTouch, GET_TEXT_F(MSG_STOPPED), GET_TEXT_F(MSG_USERWAIT));
   #else
 
     if (parser.string_arg) {

Marlin/src/gcode/lcd/M73.cpp

@@ -51,7 +51,7 @@ void GcodeSuite::M73() {
 
   #if ENABLED(DWIN_LCD_PROUI)
 
-    DWIN_M73();
+    dwinM73();
 
   #else
 

Marlin/src/gcode/sd/M1001.cpp

@@ -49,8 +49,6 @@
 
 #if ENABLED(EXTENSIBLE_UI)
   #include "../../lcd/extui/ui_api.h"
-#elif ENABLED(DWIN_LCD_PROUI)
-  #include "../../lcd/e3v2/proui/dwin.h"
 #endif
 
 #if ENABLED(HOST_ACTION_COMMANDS)

Marlin/src/gcode/stats/M75-M78.cpp

@@ -39,7 +39,7 @@
 void GcodeSuite::M75() {
   startOrResumeJob();
   #if ENABLED(DWIN_LCD_PROUI)
-    if (!IS_SD_PRINTING()) DWIN_Print_Header(parser.string_arg && parser.string_arg[0] ? parser.string_arg : GET_TEXT(MSG_HOST_START_PRINT));
+    if (!IS_SD_PRINTING()) dwinPrintHeader(parser.string_arg && parser.string_arg[0] ? parser.string_arg : GET_TEXT(MSG_HOST_START_PRINT));
   #endif
 }
 

Marlin/src/gcode/temp/M303.cpp

@@ -31,7 +31,7 @@
 
 #if ENABLED(EXTENSIBLE_UI)
   #include "../../lcd/extui/ui_api.h"
-#elif ENABLED(DWIN_LCD_PROUI)
+#elif ENABLED(PROUI_PID_TUNE)
   #include "../../lcd/e3v2/proui/dwin.h"
 #endif
 
@@ -69,7 +69,7 @@ void GcodeSuite::M303() {
       SERIAL_ECHOPGM(STR_PID_AUTOTUNE);
       SERIAL_ECHOLNPGM(STR_PID_BAD_HEATER_ID);
       TERN_(EXTENSIBLE_UI, ExtUI::onPidTuning(ExtUI::result_t::PID_BAD_HEATER_ID));
-      TERN_(DWIN_PID_TUNE, DWIN_PidTuning(PID_BAD_HEATER_ID));
+      TERN_(PROUI_PID_TUNE, dwinPidTuning(PID_BAD_HEATER_ID));
       return;
   }
 
@@ -79,7 +79,7 @@ void GcodeSuite::M303() {
   const celsius_t temp = seenS ? parser.value_celsius() : default_temp;
   const bool u = parser.boolval('U');
 
-  TERN_(DWIN_PID_TUNE, DWIN_StartM303(seenC, c, seenS, hid, temp));
+  TERN_(PROUI_PID_TUNE, dwinStartM303(seenC, c, seenS, hid, temp));
 
   IF_DISABLED(BUSY_WHILE_HEATING, KEEPALIVE_STATE(NOT_BUSY));
 

Marlin/src/inc/Conditionals_post.h

@@ -2386,10 +2386,10 @@
 
 #if ENABLED(DWIN_LCD_PROUI)
   #if ANY(PIDTEMP, PIDTEMPBED)
-    #define DWIN_PID_TUNE 1
+    #define PROUI_PID_TUNE 1
   #endif
-  #if ANY(DWIN_PID_TUNE, MPC_AUTOTUNE) && DISABLED(DISABLE_TUNING_GRAPH)
-    #define SHOW_TUNING_GRAPH 1
+  #if ANY(PROUI_PID_TUNE, MPC_AUTOTUNE) && DISABLED(DISABLE_TUNING_GRAPH)
+    #define PROUI_TUNING_GRAPH 1
   #endif
 #endif